Processing, Characterization and Mechanical Properties of SiAlONs Produced from Low Cost β-Si3N4 Powder
Source abstract
Abstract
SiAlON ceramics have been known for many years as prime candidate materials in structural applications at ambient and high temperatures involving superior mechanical and/or chemical processes. In spite of their excellent properties, the utilization of SiAlONs has remained limited till today due to the high cost of raw materials and processing. In order to circumvent this problem, low cost refractory grade, coarse, impure, less sinter active β-Si3N4 powder was used to produce SiAlON ceramics with satisfactory mechanical properties.In this article, the processing challenges in the production of SiAlON ceramics with β-Si3N4 powder were discussed. The process parameters obviously affect the phase assemblage, densification, microstructural and mechanical properties of final SiAlON ceramics. Processed β-Si3N4 powder characteristics are majorly investigated by SEM-EDX, XRD, XRF, laser particle sizer and elemental analyser. The existence of undesirable impurities in the β-SiAlON crystal structure because of the use of impure Si3N4 powders has been shown to be tolerable by TEM microstructural analysis. Mechanical properties are in general evaluated by Vickers indentation method. Wear behaviour of the cost effective SiAlONs were compared with commercially available ceramic materials which are commonly being used in wear applications. Initially the use of such powders to produce materials for engineering applications proved challenging, however, satisfactory results have been obtained by the optimization of the initial chemical composition and process parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Science and Engineering Programme, Sabanci University
Department of Mechanical and Manufacturing Engineering, Engineering Faculty, Bilecik S.E. University
Funding
Scientific and Technological Research Council of Turkey · Ministry of Science, Industry and Technology
References (32)
Show source-provided references
1. 1) Ekström, T. and Nygren, M. (1992): SiAlON ceramics, J. Am Ceram Soc., Vol.75, pp.259–276.10.1111/j.1151-2916.1992.tb08175.x ↗
2. 2) Mitomo, M. and Tayima, Y. (1991): Sintering, properties and applications of silicon nitride and SiAlON ceramics, J. Jpn. Ceram Soc., Vol.99, pp.1014.10.2109/jcersj.99.1014 ↗
3. 3) Riley, F. (2000): Silicon nitride and related materials, J. Am. Ceram. Soc., No.83, pp.245–265.10.1111/j.1151-2916.2000.tb01182.x ↗
4. 4) Li, H. X., Sun, W. Y., Wang, P. L., Yan, D. S. and Tien, T. Y. (1997): The effect of GPS parameters on mechanical properties of Y-α-SiAlON ceramics, Ceramics International., Vol.23, pp.449–56.10.1016/S0272-8842(96)00053-3 ↗
5. 5) Hayama, S., Nasu, T., Ozawa, M. and Suzuki, S. (1997):Mechanical properties and microstructure of reaction sintered β′-sialon ceramics prepared by a slip casting method, Journal of Materials Science, Vol.32, pp.4973–4977.10.1023/A:1018684409797 ↗
6. 6) Salamon, D., Šajgalík, P., Liška, M. (2005):Mechanical Properties and Microstructure of α-SiAlON Based Cutting Tools, Key Engineering Materials, Vol.290, pp.250–253.10.4028/www.scientific.net/KEM.290.250 ↗
7. 7) Kumar, R., Acikbas Calis, N., Kara, F., Mandal, H. and Basu, B. (2009) : Microstructure - Mechanical Properties - Wear Resistance Relationship of SiAlON Ceramics, Metallurgical and Materials Transactions A, Vol.40, pp.2319–2332.10.1007/s11661-009-9930-1 ↗
8. 8) Rabe, T., and Linke’, D. (1992):Attrition milling of silicon nitride powder under conditions for minimal impurity pickup, Ceramics International, Vol.18, pp.161–166.10.1016/0272-8842(92)90090-Z ↗
9. 9) Dai, J. Q., Huang, Y., and Ma, J. T. (2008) : Surface characteristics and aqueous dispersibility of commercial silicon nitride powders : Effects of acid leaching, surface hydrolysis and thermal oxidation, Ceramics International., Vol.34, pp.1835–1842.10.1016/j.ceramint.2007.06.011 ↗
10. 10) Huang, Y., Dai, J. Q., Xie, Z. P., Ma, T., Yang, J. L., Ma, J. T. (2003) : Effects of liquid medium and ball milling on the surface group and aqueous dispersibility of Si3N4 powder, J. Euro. Ceram Soc., Vol.23, pp.985–990.10.1016/S0955-2219(02)00233-9 ↗
11. 11) Tapaszto, O. and Balazsi, C. (2010) :The efeect of milling time on the sintering kinetics of Si3N4 based nano-composites, Ceramics International., Vol.36, pp.2247–2251.10.1016/j.ceramint.2010.06.006 ↗
12. 12) Naito, M., Okumiya, M., Abe, H., Kondo, A., Huang, C. C. (2010): Powder processing issues for high quality advanced ceramics, KONA Powder and Particle Journal, N0.28, pp.143–154.10.14356/kona.2010013 ↗
13. 13) Acikbas Calis, N., Kara, F., Mandal, H. (2009): Development of α-β SiAlON Ceramics From Different Si3N4 Starting Powders, Key Engineering Materials, Vol.403, pp.107–108.10.4028/www.scientific.net/KEM.403.107 ↗
14. 14) Herrmann, M., Höhn, S., Bales, A. (2011): Kinetics of rare earth incorporation and its role in densification and microstructure formation of alpha-Sialon, J. Euro. Ceram Soc., Vol.32, pp.1313–1319.10.1016/j.jeurceramsoc.2011.05.026 ↗
15. 15) Rhee, S. H., Lee, J. D. and Kim, D. Y. (2000): Effect of α-Si3N4 initial particle size on the microstructural evolution and phase transformation during sintering of Si3N4 ceramics, J. Euro. Ceram Soc., Vol.20, pp.1787–1794.10.1016/S0955-2219(00)00053-4 ↗
16. 16) Lee, C. J., Chae, J. I. and Kim, D. J. (2000): Effect of β-Si3N4 starting powder size on elongated grain growth in β-Si3N4 ceramics, J. Euro. Ceram Soc., Vol.20, pp.2667–2671.10.1016/S0955-2219(00)00128-X ↗
17. 17) Mitomo, M. and Uenosono, S. (1992): Microstructural development during gas-pressure sintering of α-silicon nitride, J. Am. Ceram Soc., Vol.75, pp.103–107.10.1111/j.1151-2916.1992.tb05449.x ↗
18. 18) Ekström, T., Ingelström, N., Brage, R., Hatcher, M. and Johansson, T. (1988): α-β-SiAlON ceramics made from different silicon nitride powders, J. Am. Ceram Soc., Vol.71, pp.1164–1170.10.1111/j.1151-2916.1988.tb05810.x ↗
19. 19) Li, Y. W., Wang, P. L., Chen, W. W., Cheng, Y.B. and Yan, D. S. (2000) : Phase formation and microstructural evolution of Ca α-SiAlON using dif ferent Si3N4 starting powders, J. Euro. Ceram Soc., Vol.20, pp.1803–1808.10.1016/S0955-2219(00)00058-3 ↗
20. 20) Irene G. Cano and Miguel A. Rodríguez (2004) : Synthesis of β-Silicon nitride by SHS: fiber growth, Scripta Materialia., Vol.50, pp.383–386.10.1016/j.scriptamat.2003.10.001 ↗
21. 21) Acikbas Calis, N., Kumar, R., Kara, F., Mandal, H., andBasu, B (2011): Influence of β-Si3N4 particle size and heat treatment on microstructural evolution of α:β-SiAlON Ceramics, J. Euro. Ceram Soc., Vol.31, pp.629–635.10.1016/j.jeurceramsoc.2010.10.001 ↗
22. 22) Boris, E. L., Zhmud, V. and Bergstrom, L. (2000) : Dissolution and Deagglomeration of Silicon Nitride in Aqueous Medium, J. Am. Ceram Soc., Vol.83, pp.2394–2400.10.1111/j.1151-2916.2000.tb01567.x ↗
23. 23) Kara, F., Mandal, H., Turan, S., Kara, A. and Acikbas Calis, N.: Development Strategies for SiAlON Ceramics, Global Roadmap for Ceramics ICC2 Proceedings, pp.119–128, 2nd International Congress on Ceramics, June 29–July 4, Verona, Italy, 2008.
24. 24) Mandal, H. (1992): “Heat treatment of sialon ceramics”, PhD. Thesis, University of Newcastle Upon Tyne, 149pp.
25. 25) Mitomo, M., Tsutsumi, H., Tanaka, S., Uenosono, S. and Saito, F. (1990): Grain growth during gas-pressure sintering of β-silicon nitride, J. Am. Ceram Soc., Vol.73, pp.2441–2445.10.1111/j.1151-2916.1990.tb07610.x ↗
26. 26) Lee, C. J., Chae, J. I. and Kim, D. J. (2000): Effect of beta-Si3N4 starting powder size on elongated grain growth in bet]-Si3N4 ceramics, J. Eur. Ceram Soc., Vol.20, pp.2667–2671.10.1016/S0955-2219(00)00128-X ↗
27. 27) Mitomo, M., Hirotsuru, H., Suematsu, H. and Nishimura, T. (1995): Fine-grained silicon nitride ceramics prepared from β-powder, J. Am. Ceram Soc., Vol.78, pp.211–214.10.1111/j.1151-2916.1995.tb08385.x ↗
28. 28) Hirosaki, N., Akimune, Y. and Mitomo, M. (1993): Effect of grain growth of β-silicon nitride on strength, Weibull modulus, and fracture toughness, J. Am. Ceram Soc., Vol.76, pp.1892–1894.10.1111/j.1151-2916.1993.tb06670.x ↗
29. 29) Yurdakul, H., and Turan, S. (2011): Incorporation of the transition metals (Cr and Fe) into beta-SiAlON crystal structure, Ceramics International, Vol.37, pp.1501–1505.10.1016/j.ceramint.2011.01.009 ↗
30. 30) Huseby, I. C., Lukas, H. L. and Petzow, G., (1975): Phase equilibria in the system Si3N4-SiO2-BeO-Be3N2, J. Am. Ceram Soc., Vol.58, pp.378–380.10.1111/j.1151-2916.1975.tb19002.x ↗
31. 31) Jack, K. H. (1973) :Nitrogen Ceramics, Trans, J. Br.Ceram. Soc., Vol.72, pp.376–384.
32. 32) Oyama, Y. (1973) : Solid Solution in the System Si3N4-Ga2O3-Al2O3, Jpn. J. Appl., Phys., Vol.12, pp.500–508.10.1143/JJAP.12.500 ↗