journal article·2008Open access

Scale-up of High-Shear Mixer Granulators

Nejatollah Rahmanian, Boonho Ng, Ali Hassanpour, Yulong Ding, Joseph Antony, Xiaodong Jia, Mojtaba Ghadiri, Peter van der Wel, Allet Krug-Polman, David York, Andrew Bayly, Hong Sing Tan

KONA Powder and Particle Journal· Volume 26· Issue 0

Abstract

The mechanics of particle interactions and the prevailing level of compressive stresses and shear strains are affected by the scale of operation, which in turn affects the granule structure, strength and functional properties. This may be the main reason why the current scaling relationships are ineffective from a viewpoint of product engineering.In a research programme supported by the EPSRC and four industrial organizations, i.e. Borax Europe, Hosokawa Micron BV, Pfizer Global Research and Development, and Procter and Gamble, we have addressed the following topics: Development of methodologies for quantifying the structure of granules in terms of internal voidage and composition distributions, strength, shape, size and density. Identification of the parameters that affect the structure of granules by using fundamental theories of microscopic contact mechanics of particles using DEM, macroscopic granular flow dynamics and kinetics of wetting. Experimental work across several length scales (1 L, 5 L, 50 L and 250 L) to aid the analysis of the process. In this paper, an overview of findings and their implications for granulation practice is presented.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Mineral Processing and Grinding · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Particle Science and Engineering, University of Leeds

Hosokawa Micron BV

Procter and Gamble

References (41)

Show source-provided references
1. 1) Capes, C.E. (1980): Particle size enlargement, In Handbook of Powder Technology. Vol. 1. Elsevier, Amsterdam.
2. 2) Pietsch, W. (1991): “Size enlargement by agglomeration”, Wiley; Aarau; Salle and Sauerländer, Chichester.
3. 3) Ennis, B. J., Litster, J. D. (1997): Principles of size enlargement. In Green D, Perry R. eds. Perry’s Chemical Engineers Handbook 7th Edition. New York: McGraw Hill.
4. 4) Litster, J. and Ennis, B. (2004): “The science and engineering of granulation process”, Dordrecht, The Netherlands, Kluwer academic publishers.10.1007/978-94-017-0546-2_8 ↗
5. 5) Faure, P. York and R.C. Rowe, (2001): Process control and scale-up of pharmaceutical wet granulation processes: A Review, European Journal of Pharmaceutics and Biopharmaceutics 52, pp.269–277.10.1016/S0939-6411(01)00184-9 ↗
6. 6) Knight, P. (2004): Challenges in granulation technology, Powder Technol. 140, pp.156–162.10.1016/j.powtec.2004.01.008 ↗
7. 7) Timothy, A. B. (2005): Challenges in the scale-up of particulate processes - an industrial perspective, Powder Technol. 150, pp.60–71.10.1016/j.powtec.2004.11.023 ↗
8. 8) Mort, P. R. (2005): Scale-up of binder agglomeration processes, Powder Technol. 150, pp.86–103.10.1016/j.powtec.2004.11.025 ↗
9. 9) Newitt, D.M. and Conway-Jones, J. M. (1958): A contribution to the theory and practice of granulation, Trans. Inst. Chem Eng. 36, pp.422–441.
10. 10) Kapur, P.C. and Fuerstenau, D.W. (1969): A coalescence model for granulation, Ind. Eng. Chem. Process Des. Dev. 8, pp.56–62.10.1021/i260029a010 ↗
11. 11) Iveson, S. M., Litster, J.D. and Ennis, J.D. (1996): Fundamental studies of granule consolidation: Part 1. Effects of binder viscosity and binder content, Powder Technol. 88, pp.15–20.10.1016/0032-5910(96)03096-3 ↗
12. 12) Knight, P.C., Instone, T., Peason, J.M.K. and Hounslow, M.J.(1998): An investigation into kinetics of liquid distribution and growth in high shear mixer agglomeration, Powder Technol. 97, pp.246–257.10.1016/S0032-5910(98)00031-X ↗
13. 13) Knight, P.C., Johansen, A., Kristensen, P.C., Schaefer, P.C. and Seville, J.P.K. (2000): An investigation of the effects on agglomeration of changing the speed of a mechanical mixer, Powder Technol. 110, pp.204–209.10.1016/S0032-5910(99)00259-4 ↗
14. 14) Scott, A., Hounslow, M.J. and Instone, T. (2000): Direct evidence of heterogeneity during high shear granulation, Powder Technol. 113, pp.205–213.10.1016/S0032-5910(00)00354-5 ↗
15. 15) Johansen, A. and Schaefer, T. (2001): Effects of interactions between powder particle size and binder viscosity on agglomerate growth mechanisms in a high shear mixer, Eur. J. Pharm. Sci. 12, pp.297–309.10.1016/S0928-0987(00)00182-2 ↗
16. 16) Faure, A., Grimsey, I. M, Rowe, R.C., York, P. and Cliff, M.J. (1998): A methodology for the optimization of wet granulation in a model planetary mixer, Pharm. Dev. Technology 3, pp.413–422.10.3109/10837459809009869 ↗
17. 17) Bock, T K. and Kraas (2001): Experience with the Diosna mini-granulator and assessment of process scalability, European Journal of Pharmaceutics and Biopharmaceutics 52, pp.97–303.10.1016/S0939-6411(01)00197-7 ↗
18. 18) Horsthuis, G.J.B., van Larrhoven, J. A. H, van Rooij, R. C. B. M. and Vormans, H. (1993): Studies on up scaling parameters of the Gral high-shear granulation process, Int. J. Pharm. 92, pp.143–150.10.1016/0378-5173(93)90273-I ↗
19. 19) Tardos, G.I, Irfan Khan, M. and Mort, P.M. (1997): Critical parameters and limiting conditions in binder granulation of fine powders, Powder Technol. 94, pp.245–258.10.1016/S0032-5910(97)03321-4 ↗
20. 20) Tardos, G.I., Hapgood, K.P., Ipadeola, O.O. and Michaels, J.N. (2004): Stress measurements in high-shear granulators using calibrated “test” particles: application to scale-up, Powder Technol. 140, pp.217–227.10.1016/j.powtec.2004.01.015 ↗
21. 21) Subero, J. And Ghadiri, M. (2001): Breakage patterns of agglomerates, Powder Technol. 120 (3), pp.232–243.10.1016/S0032-5910(01)00276-5 ↗
22. 22) Salman, A.D., Fu, J., Gorham, A. D. and Hounslow, M.J. (2003): Impact breakage of fertiliser granules. Powder Technol. 130 (1–3), pp.359–366.10.1016/S0032-5910(02)00237-1 ↗
23. 23) Golchert, D., Moreno, R., Ghadiri, M. and Litster, J. (2004): Effect of granule morphology on breakage behaviour during compression, Powder Technol. 143–144, pp.84–96.10.1016/j.powtec.2004.04.032 ↗
24. 24) Antonyuk, S., Khanal, M., Tomas, J., Heinrich, S. and Mörl, L. (2006): Impact breakage of spherical granules: experimental study and DEM simulation, Chemical Engineering and Processing 45 (10), pp.838–856.10.1016/j.cep.2005.12.005 ↗
25. 25) Hassanpour, A., Antony, S.J. and Ghadiri, M. (2007): Effect of size ratio on the behaviour of agglomerates embedded in a bed of particles subjected to shearing - DEM analysis, Chem. Eng. Sci. 62, pp.935–942.10.1016/j.ces.2006.10.026 ↗
26. 26) Parker, J., Hawkesworth, M.R., Broadbent, C.J., Fowles, P., Fryer, T. D. and McNeil, P. (1994): Industrial positron-based imaging: principles and applications, Nuclear Instruments and Methods in Physics Research A, 348, pp.583–592.10.1016/0168-9002(94)90805-2 ↗
27. 27) Parker, D. J., Dijkstra, A.E., Martin, I.T.W and Seville, J. P. K. (1997): Positron emission particle tracking studies of spherical particle motion in rotating drums, Chemical Engineering Science, 52(13), pp.2011–2022.10.1016/S0009-2509(97)00030-4 ↗
28. 28) Parker, D. J., Forster, R.N, Fowles, P. and Takhar, P.S.(2002): Positron emission particle tracking using the new Birmingham positron camera, Nuclear Instruments and Methods in Physics Research A, 477, 540–545.10.1016/S0168-9002(01)01919-2 ↗
29. 29) Kwan, C. C., Hare, C., Ding, Y., Williams, R.A. and Ghadiri, M.(2006): How granule characteristics change when high shear mixer granulator are scale-up, Fifth World Congress on Particle Technology, 23–27 April, Florida, USA.
30. 30) Eliassi, A., Modarres, H. and Mansoori, G.A.(1998): Densities of Polyethyleneglycol and water mixtures in the 298.15–328.15K temperature range, J. Chem. Eng. Data, 43, pp.719–721.10.1021/je970228a ↗
31. 31) Kwan, C.C., Ding, Y., Williams, R. A. and Ghadiri, M.(2005): Effects of operating parameters of high shear granulator on the evolved properties and structure of calcium carbonate granules, in Particular Systems Analysis Stratford-upon-Avon, UK.
32. 32) Rahmanian, N., Ghadiri, M., Ding, Y. and Jia, X.(2007): Influence of scale-up of high shear mixer granulators on the strength and properties of granules, PARTEC 2007, P06_03 27–29 March, Nuremberg, Germany.
33. 33) Rahmanian, N., Ghadiri, M. and Ding, Y. (2008): Effect of scale of operation on granule strength in high shear granulators, Chem. Eng. Sci., 63 (4), pp.915–923.10.1016/j.ces.2007.10.027 ↗
34. 34) Cundall, P. A.(1971): A computer model for simulating progressive, large-scale movements in blocky rock systems, Proc. Symp. Int. Soc. Rock Mech., Nancy 2, 8.
35. 35) Cundall, P.A. and Strack, O.D.L.(1979): A discrete numerical model for granular assemblies, Geotechnique 29, pp.47–65.10.1680/geot.1979.29.1.47 ↗
36. 36) Thornton, C., and Yin, K.K.(1991): Impact of elastic sphere with and without adhesion, Powder Technol. 65, pp.153–166.10.1016/0032-5910(91)80178-L ↗
37. 37) Hooijmaijers, R., Oostra, W. and van den Dries, K. (2007): An investigation of upscaling factors in high shear granulation, International Congress on Particle Technology, PARTEC 2007, S05_1 27–29 March 2007, Nuremberg, Germnay.
38. 38) Ng, B. H., Kwan, C.C., Ding, Y. L. Ghadiri, M. and Fan, X.F.(2007): Solids motion in a conical frustum-shaped high shear mixer granulator, Chem. Eng. Sci. 62, pp.756–765.10.1016/j.ces.2006.10.003 ↗
39. 39) Hassanpour, A., Kwan, C.C., Ng, B.H., Rahmanian, N., Ding, Y.L., Antony, Y.L., Jia, Y.L. and Ghadiri, M. (2008): Effect of granulation scale-up on the structure and strength of granules, in print, Powder Technol., doi: 10.1016.
40. 40) Rumpf, H.(1962): The strength of granules and agglomerates, In Agglomeration (ed. W.A. Knepper), Proceedings of the First International Symposium on Agglomeration, Philadelphia. John Wiley and Sons, New York/London, pp.379–418.
41. 41) Kendall, K. (1988): Agglomerate strength, Powder Metallurgy, 31 (1), pp.28–31.