journal article·2013Open access

Powder Technology and Pharmaceutical Development: Particle Size and Particle Adhesion

Frank M. Etzler, Mohammad Nasir Uddin

KONA Powder and Particle Journal· Volume 30· Issue 0

Abstract

Both the FDA (U.S. Food and Drug Administration) and ICH (International Conference on Harmonisation) have urged the incorporation of Quality by Design (QbD)1) into the manufacture of pharmaceutical products2).The performance of many pharmaceutical manufacturing processes and the performance of some pharmaceutical products requires a knowledge of powder properties. Under the principles of QbD it is possible to adjust processes to account for variations in powder properties. These adjustments, in turn, require knowledge of the relation between powder properties and manufacturing performance. This relation between powder properties and performance is often not well understood; thus, the required information is not collected.In this paper, particle-particle and particle-surface interactions are considered to be a source of product variability. As particle size effects are intertwined with particle adhesion effects this topic is also considered. From the discussion below, it can be seen that the surface chemistry of particles can vary due to mechanical treatment, crystallization solvent, and surface contamination. Variations in surface chemistry affect interparticle adhesion and thus may lead to process or product performance changes. Issues concerning the role of interparticle adhesion that are related to tableting and dry powder inhalers are discussed in some detail.It is clear that a deeper understanding of the powder state and the establishment of appropriate analytical tools will be required to fully implement QbD. Improvements in particle sizing technologies, improvements powder sampling procedures and measurements of particle surface properties will be required. It is hoped that this paper will stimulate thought on this issue.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Drug Solubulity and Delivery Systems · Inhalation and Respiratory Drug Delivery · Scientific Measurement and Uncertainty Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Pharmacy, Lake Erie College of Osteopathic Medicine

References (98)

Show source-provided references
1. 1) Juran, J. M. (1992): “Juran on Quality by Design: The new steps for planning quaility in goods and services”, 1st ed., New York: The Free Press: A Division of of Simon and Schuster, New York.
2. 2) ICH (2009): “Pharmaceutical Development Q8(R2): Current Step 4 version”, ICH Expert Working, Geneva, Switzerland.
3. 3) Kaye, B. H. (1997): “Powder Mixing”, New York: Chapman and Hall.
4. 4) Kaye, B. H. (1994): “A Random Walk through Fractal Dimensions”. 2 ed., New York: VCH.10.1002/9783527615995 ↗
5. 5) Jallo, L. J., Chen, Y., Bowen, J., Etzler, F., Dave, R. (2011): Prediction of interparticle adhesion force from surface energy and surface roughness, J. Adhesion Sci. and Tech., 25, pp.367–384.10.1163/016942410X525623 ↗
6. 6) Sekiguchi, M. (1997): “Adhesion and mechanical strength of a powder bed”, Powder Technology Handbook, 2nd ed., eds: Gotoh, Masuda, Higashitani, New York: Marcel Dekker, pp.351–360.
7. 7) Suzuki, M. (1997): “Description of particulate assemblies” Powder Technology Handbook, 2nd ed., eds: Gotoh, Masuda, Higashitani, New York: Marcel Dekker, pp.305–320.
8. 8) Etzler, F. M., Ibraham, T., Burk, T. R., Neuman, R. D. (2002): “Direct adhesion measurements between pharmaceutical materials”, Particles On Surfaces, Vol.7, ed: Mittal, VSP, Utrecht, The Netherlands, pp.235–252.10.1201/9780429070716-16 ↗
9. 9) Kawashima, Y. (1997): “Solubility and dissolution rate” Powder Technology Handbook, eds: Gotoh, Masuda, Higashitani, New York: Marcel Dekker, pp.217–230.
10. 10) Allen, T. (1990): “Particle Size Measurement”, London:Chapman Hall.10.1007/978-94-009-0417-0 ↗
11. 11) Etzler, F. M. (2006): “Particle size analysis”, Solid State Characterization of Pharmaceuticals, eds: M &A. Zakrzewski, Danbury, CT: ASSA, Inc.. p493–536.
12. 12) Iococca, R. (2007): Particle size analysis in the pharmaceutical industry, Amer. Pharm. Rev., Vol.10, pp.20–23.
13. 13) Rawle, A. F. (2010): “Analytical tools for suspension characterization” Pharmaceutical Suspenstions: From Formulation Development to Manufacturing, eds: Kuldshreshtha, Singh, Wall, New York: Springer Scence and Business Media, LLC, pp.177–230.10.1007/978-1-4419-1087-5_6 ↗
14. 14) Moschwitzer, J. (2010): The role of particle size analysis in the development process of nanosized drug products Amer. Pharm. Rev., Vol.13, pp.98–101.
15. 15) Allen, T. (2003): “Powder Sampling and Particle Size Determination” New York: Elsevier.10.1016/B978-044451564-3/50003-6 ↗
16. 16) Etzler, F. M., Deanne, R. (2007): Particle size Analysis: importance of sampling, Amer. Pharm. Rev., Vol.10, p.132
17. 17) Allen, T. and Khan, A. A. (1970): Critical evaluation of powder sampling procedures, The Chemical Engineer, Vol.238, pp.108–112.
18. 18) Montes-Burgos, A., Walczyk, D., Hole, P., Smith, J., Lynch, I. and Dawson, K. (2010): Characterisation of nanoparticle size and state prior to nanotoxicological studies, J. Nanopart. Res., Vol.12, pp.437–475.10.1007/s11051-009-9774-z ↗
19. 19) Filipe, V., Hawe, A., Jiskoot, W. (2010): Critical evaluation of nanoparticle tracking analysis (NTA) by nanoSight for the measurement of nanoparticles and protein aggregates, Pharm. Res., Vol.27, pp.796–810.10.1007/s11095-010-0073-2 ↗
20. 20) Henriquez, R. R., Ito, T., Sun, L., Crooks, R. M. (2004): The Resurgence of coulter counting for analyzing nanoscale objects, The Analyst., Vol.129, pp.478–482.10.1039/b404251b ↗
21. 21) Ito, T., Sun, L., Bevan, M. A., Crooks, R. M. (2004): Comparison of nanoparticle size and electrophoretic mobility measurements using a carbon nanotube-based coulter counter, dynamic light scattering, transmission electron microscopy, and phase analysis light scattering Langmuir, Vol.20, pp.6940–6945.10.1021/la049524t ↗
22. 22) Jillavenkatesa, A., Dapkunas, S. J., Lum, L. H. (2001): “Particle Size Characterization, NIST Recommended Practice Guide, Special Pub, 960-1” Washington,DC: US GOVT Printing Office.
23. 23) Leblanc, J. (1986): “The Shape and Size Characterization of Respirable Dusts”, M. Sc. Thesis, Laurentian University.
24. 24) Murphy, R. (1972): “Optical Information Processing Procedures for Determining the Essential Features of Particle Shape”, M. Sc. Thesis, Laurentian University.
25. 25) Kaye, B. H. (1986): “Fractal dimension and signature waveform characterization of fineparticle shape”, American Laboratory April, p.55.
26. 26) Driscoll, D. F., Etzler, F. M., Barber, T. A., Nehne, J., Neimann, W., Bistrain, B. R. (2001): Physicochemical assessment of parental lipid emulsions: light obscuration versus laser diffraction, Intl. J. Pharmaceutics, Vol.219, pp.21–37.10.1016/S0378-5173(01)00626-3 ↗
27. 27) Etzler, F. M., Sanderson, M. S. (1995): Particle size analysis: a comparative study of various methods, Part. Part. Syst. Characterization, Vol.12, pp.217–224.10.1002/ppsc.19950120503 ↗
28. 28) Etzler, F. M., Deanne, R. (1997): Particle size analysis: a comparison of various methods II, Part. Part. Syst. Charact., Vol.14, pp.278–282.10.1002/ppsc.19970140604 ↗
29. 29) Zimon, A. (1982): “Adhesion of Dust and Powder”, 2nd Ed., New York: Consultants Bureau.10.1007/978-1-4615-8576-3 ↗
30. 30) Etzler, F. M. (2003): “Characterization of surface free energies and surface chemistry of Solids” Contact Angle Wettability and Adhesion, Vol. 3, ed. Mittal, Utrecht, The Netherlands: VSP. pp.219–264.
31. 31) Fowkes, F. M. (1968): Calculation of work of adhesion by pair potential summation, J. Colloid Interf. Sci., Vol.28, pp.493–505.10.1016/0021-9797(68)90082-9 ↗
32. 32) Fowkes, F. M. (1962): Determination of interfacial tensions, contact angles and dispersion forces by assuming additivity of intermolecular interactions in surfaces, J. Phys. Chem., Vol.66, pp. 382.10.1021/j100808a524 ↗
33. 33) Berthelot, D. (1898): Sur le melange des gaz Compt. Rend. Vol.126, p.1857.
34. 34) Chang, W. V., Qin, X. (2000): “Repulsive acid-base interactions: fantasy or reality”, Acid-Base Interactions: Relevance to Adhesion Science and Technology., Vol.2, ed: Mittal New York: VSP, pp.3–54.
35. 35) Adamson, A. W. (1990): “Physical Chemistry of Surfaces”, 4th ed., New York: J. Wiley.
36. 36) Good, R. J. (1993): “Contact angle, wetting and adhesion: a critical review” Contact Angle, Wettability and Adhesion, Utrecht, The Netherlands: VSP. pp.3–36.
37. 37) van Oss, C. J. (1994): “Interfacial Forces in Aqueous Media”, New York: Marcel Dekker.
38. 38) Della Volpe, C., Siboni, S. (1997): Some reflections on acid–base solid surface free energy theories, J. Colloid Interf. Sci., Vol.195, pp.121–136.10.1006/jcis.1997.5124 ↗
39. 39) Owens, D. K., Wendt, R. C. (1969): Estimation of the Surface Free Energy of Polymers, J. Appl. Polym. Sci., Vol.13, pp.1741–1747.10.1002/app.1969.070130815 ↗
40. 40) Good, R. J. (2000): “On the acid/base theory of contact angles”, Acid-Base Interactions: Relevance to Adhesion Science and Technology., Vol.2, ed: Mittal, Utrecht, The Netherlands: VSP. pp.167–171.
41. 41) Fowkes, F. M., Mostafa, M. A. (1978): Acid-base interactions in polymer adsorption, Ind. Eng. Chem. Prod. Res. Dev., Vol.17, pp.3–7.10.1021/i360065a002 ↗
42. 42) Fowkes, F. M. (1972): Donor-acceptor interactions at interfaces, J. Adhesion, Vol.4, pp.155–159.10.1080/00218467208072219 ↗
43. 43) Vrbanac, M., D., Berg, J. C. (1991): “The use of wetting measurements in assessment of acid-base interactions at solid-liquid interfaces”, Acid-Base Interactions: Relevance to Adhesion Science and Technology, eds: Mittal, Anderson, Utrecht, The Netherlands: VSP., p. 67.
44. 44) Fowkes, F. M. (1987): role of acid-base interfacial bonding in adhesion, J. Adhesion Sci. Technol., Vol.1, pp.7–27.10.1163/156856187X00049 ↗
45. 45) Drago, R. S., Vogel, G. C., Needham, T. E. (1971): Four-parameter equation for predicting enthalpies of adduct formation, J. Amer. Chem. Soc., Vol.93, pp.6014–6026.10.1021/ja00752a010 ↗
46. 46) Gutmann, V., Steininger, A., Wychera, E. (1966): Donorstarken in 1,2-Dichlorathan Montash Chem., Vol.97, pp.460–467.10.1007/BF00905266 ↗
47. 47) Gutmann, V. (1978): “The Donor-Acceptor Approach to Molecular Interaction”, New York: Plenum.10.1007/978-1-4615-8825-2 ↗
48. 48) Riddle, F. L., Fowkes, F. M. (1990): Spectral shifts in acid-base chemistry. 1. van der Waals contributions to acceptor numbers, J. Amer. Chem. Soc., Vol.112, pp.3259–3264.10.1021/ja00165a001 ↗
49. 49) Mayer, U., Gutmann, V., Wychera, E. (1975): The acceptor number-a quantitative empirical parameter for the electrophilic properties of solvents, Montash. Chem., Vol.106, pp.1235–1257.10.1007/BF00913599 ↗
50. 50) Leitte, F. L., Herrmann, P. S. P. (2005): “Application of atomic force spectroscopy (AFS) to studies of adhesion phenomenon: a review”, Atomic Force Microscopy in Adhesion Studies, eds: Drelich, Mittal, Leiden: VSP, pp.3–43.
51. 51) Muhlen, E., Nieus, H. (1997): Introduction to atomic force microscopy and its application to the study of lipid nanoparticles. Particle and Surface Characterisation Methods, eds: Muller, Mehnert, Stuttgart: Medpharm Scientific Publishers.
52. 52) Binnig, G., Quate, C. F., Gerber, C. (1986): Atomic Force Microscope, Phys. Rev. Lett., Vol.56, pp.930–933.10.1103/PhysRevLett.56.930 ↗
53. 53) Etzler, F. M., Drelich, J. (2012): “Atomic force microscopy for characterization of surfaces, particles, and their interactions”, Developments in Surface Contamination and Cleaning, eds. Kohli, Mittal, New York: Elsevier, pp.307–332.10.1016/B978-1-4377-7883-0.00006-7 ↗
54. 54) Gan, Y. (2009): Atomic and subnanometer resolution in ambient conditions by atomic force microscopy, Surface Science Reports., Vol.64, pp.99–121.10.1016/j.surfrep.2008.12.001 ↗
55. 55) Viani, M. B., Schaffler, T. S., Chand, A., Reif, M., Gaub, H. E., Hasma, P. K. (1999): Small cantilevers for force spectroscopy of single molecules, J Applied Phys., Vol.86, pp.2258–2262.10.1063/1.371039 ↗
56. 56) Meyer, E. (1992): Atomic force microscopy, Prog. Sur. Sci., Vol.41, pp.3–49.10.1016/0079-6816(92)90009-7 ↗
57. 57) Grasias, D. H., Somorja, G. A. (1998): Continuum force microscopy study of elastic modulus, hardness and friction of polyethylene and polypropylene surfaces, Macromolecules, Vol.31, pp.1269–1276.10.1021/ma970683b ↗
58. 58) Cleveland, J. P., Manne, S., Brock, D., Hansma, P. K. (1993): A nondestructive method for determining the spring constant of cantilevers for scanning force microscopy, Rev. Sci. Instrum., Vol.64, pp.403–405.10.1063/1.1144209 ↗
59. 59) Sader, J. E., Larson, I., Mulvaney, P., White, L. R. (1995): method for the calibration of atomic force microscope cantilevers, Rev. Sci. Instrum., Vol.66, pp.789–3798.10.1063/1.1145439 ↗
60. 60) Hutter, J. L., Bechhiefer, J. (1993): Calibration of atomic-Force microscope tips, Rev. Sci. Instrum., Vol.64, pp.1868–1873.10.1063/1.1143970 ↗
61. 61) Levy, R., Maaloum, M. (2002): Measuring the spring constant of atomic microscope cantilevers: thermal fluctuations and other methods, Nanotechnology., Vol.13, pp.33–37.10.1088/0957-4484/13/1/307 ↗
62. 62) Willing, G. A., Ibrahim, T. H., Etzler, F. M., Neuman, R. D. (2000): New approach to the study of particle-surface adhesion using atomic force microscopy, J. Colloid Interf. Sci., Vol.226, pp.185–188.10.1006/jcis.2000.6801 ↗
63. 63) Rotsch, C., Radmacher, M. (1997): Mapping local electrostatic forces with the atomic force microscope, Langmuir, Vol.13, pp.2825–2832.10.1021/la960874s ↗
64. 64) Sugisaki, K., Nakagiri, N. (1999): Data processing in force curve mapping, Appl. Surf. Sci., Vol.145, pp.613–617.10.1016/S0169-4332(98)00876-9 ↗
65. 65) Mizes, H. A., Loh, K. G., Miller, R. J. D., Ahuja, S. K., Grabowski, E. (1991): Submicron probe of polymer adhesion with atomic force microscopy: dependence on topography and material inhomogeneities, Appl. Phys. Lett., Vol.59, pp.2901–2903.10.1063/1.105846 ↗
66. 66) Drucker, W. A., Senden, T. J., Pashley, R. M. (1992): Measurement of forces in liquids using a force microscope, Langmuir, Vol.8, pp.1831–1836.10.1021/la00043a024 ↗
67. 67) Giebers, M., Kleijn, J. M., Coehn-Stuart, M. A. (2002): The electrical double layer on gold probed by electrokinetic and surface force, J. Colloid Interf. Sci., Vol.248, pp.88–95.10.1006/jcis.2001.8144 ↗
68. 68) Bowen, W. R., Hilal, N., Lovitt, R. W., Wright, C. J. (1999): An atomic force microscopy of the adhesion of a silica sphere to a silica surface - effects of surface cleaning, Colloid Surf. A., Vol.157, pp.117–125.10.1016/S0927-7757(99)00045-X ↗
69. 69) Ibraham, T. H., Burk, T. R., Etzler, F. M., Neuman, R. D. (2000): Direct adhesion measurements of pharmaceutical particles to gelatin capsule surfaces, J. Adhesion Sci. Technol., Vol.14, pp.1225–1242.10.1163/156856100742177 ↗
70. 70) Drucker, W. A., Senden, T. J., Pashley, R. M. (1991): Direct measurement of colloidal forces using an atomic force microscope, Nature, Vol.353, pp.239–241.10.1038/353239a0 ↗
71. 71) Stewart, M. D. (2001): Characterisation of adhesional properties of lactose carriers using atomic force microscopy, J. Pharm. Biomed. Anal., Vol.25, pp.559–567.10.1016/S0731-7085(00)00523-9 ↗
72. 72) Johnson, K. L., Kendall, K., Roberts, A. D. (1971): Surface energy and the contact of elastic solids, Proc. R. Soc. London A., Vol.324, pp.301–313.10.1098/rspa.1971.0141 ↗
73. 73) Derjaguin, B. V., Muller, V. M., Toporov, Y. P. (1975): Effect of contact deformations on the adhesion of particles, J. Colloid Interf. Sci., Vol.53, pp.314–326.10.1016/0021-9797(75)90018-1 ↗
74. 74) Yuan, Y., Lenhoff, A. M. (2003): Measurement of mobility of adsorbed colloids by lateral force microscopy, J. Colloid Interf. Sci., Vol.267, pp.352–359.10.1016/S0021-9797(03)00577-0 ↗
75. 75) Zamora, R. R. R., Sanchez, C. M., Freire, F. L., Prioli, R. (2004): Influence of capillary condensation of water in nanoscale friction, Phys. Stat. Solid A, Vol.201, pp.850–856.10.1002/pssa.200304367 ↗
76. 76) Putman, C.A.J., van der Werf, K. O., de Grooth, B. G., Hulst, N. F., Greeve, J. (1999): Tapping mode force microscopy in liquid, Appl. Phys. Lett., Vol.64, pp.2454–2456.10.1063/1.111597 ↗
77. 77) Zhong, Q., Innes, D., Kjoller, K., Ellings, V. B. (1993): Fractured polymer/silica fiber surface studied by tapping mode atomic force microscopy, Surf. Sci. Letters, Vol.290, pp.L688–L692.10.1016/0167-2584(93)90906-Y ↗
78. 78) Garcia, R., Perez, R. (2002): Dynamic atomic force microscopy methods, Surf. Sci. Rep., Vol.47, pp.197–301.10.1016/S0167-5729(02)00077-8 ↗
79. 79) Heng, J. Y. Y., Bismark, A., Lee, A. F., Wilson, K., Williams, D. R. (2007): Anisotropic Surface Chemistry of Aspirin Tablets, J. Pharm. Sci., Vol.96, pp.2134–2144.10.1002/jps.20841 ↗
80. 80) Ho, R., Hinder, S. J., Watts, J. F., Dilworth, S. E., Williams, D. R., Heng, J. Y. Y. (2010): Determination of surface heterogeneaty of D-mannitol by sessile drop contact angle and finite concentration inverse gas chromatography, Intl. J. Pharmaceutics, Vol.387, pp.79–86.10.1016/j.ijpharm.2009.12.011 ↗
81. 81) Heng, J.Y.Y., Bismark, A., Williams, D. R. (2006): Anisotropic surface chemistry of crystalline pharmaceutical solids, AAPS PharmSciTech, Vol.7, pp.E1–E9.
82. 82) Alagusundaram, M., Deepthi, N., Ramkanth, S., Angalaparameswari, S., Mohamed-Saleem, T. S., Gnanaprakash, K., Thiruvengadarajan, V. S., Madhusudhana-Chetty, C. (2010): Dry powder inhalers - an overview, Intl. J. Res. Pharm. Sci., Vol.1, pp.34–42.
83. 83) Beach, E. R., Drelich, J. (2011): Atomic force microscope pull-off force measurements for insulin in contact with acrylonitrile–butadiene–styrene and polypropylene surfaces at various humidities, J. Adhesion Sci. Technol., Vol.25, pp.435–449.10.1163/016942410X525650 ↗
84. 84) Etzler, F. M., Ibrahim, T. H., Burk, T. R., Wiulling, G. A., Neuman, R. D. (2002): “The effect of the acid-base chemistry of lactose on its adhesion to gelatin capsules: conclusions from contact angles and other surface chemical techniques”, Contact Angle, Wettability and Adhesion., Vol.2, ed: Mittal, Zeist, The Netherlands: VSP, pp.13–44.
85. 85) Cao, X., Morganti, M., Hancock, B. C., Materson, V. M. (2010): Correlating particle hardness with powder compaction performance, J. Pharm. Sci., Vol.99, pp.4307–4316.10.1002/jps.22130 ↗
86. 86) Cao, X., Materson, V. M. (2008): Evaluating particle hardness of pharmaceutical solids using AFM nanoindentation, Intl. J. Pharmaceutics., Vol.362, pp.163–171.10.1016/j.ijpharm.2008.06.015 ↗
87. 87) Lao, X., Wiedmann, T. S. (2005): Measurment of process-dependant material properties of pharmaceutical solids by nano indentation, J. Pharm. Sci., Vol.94, pp.79–92.10.1002/jps.20227 ↗
88. 88) Ramos, K. J., Bahr, D. F. (2007): Mechanical behavior assessment of sucrose using nanoindentation, J. Mater. Res., Vol.22, pp.2037–2045.10.1557/jmr.2007.0249 ↗
89. 89) Etzler, F. M., Bramante, T., Deanne, R., Sienkiewicz, S., Chen, F. J. (2011): Tablet tensile strength: an adhesion science perspective, J. Adhesion Sci. and Tech., Vol.25, pp.501–519.10.1163/016942410X525687 ↗
90. 90) Ryshkewitch, E. (1953): Compression strength of porous sintered alumina and zirconia, 9th Communication to Ceramography, J. Am. Ceram. Soc., Vol.36, pp.65–68.10.1111/j.1151-2916.1953.tb12837.x ↗
91. 91) Duckworth, W. (1953): Discussions of Ryshkewitch paper by Winston Duckworth, J. Am. Ceram. Soc., Vol.36, p.68.10.1111/j.1151-2916.1953.tb12838.x ↗
92. 92) Doelker, E. (1994): “Assessment of powder compaction” Powder Technology and Pharmaceutical Processes, eds: Chulia, Deleul, Pourcelot, New York: Elsevier, p 403
93. 93) Barraleta, J. E., Grovera, L., Gaunta, T., Wright, A. J., Gibsonc, I. R. (2002): Preparation of macroporous calcium phosphate cement tissue engineering scaffold, Biomaterials, Vol.23, pp.3063–3072.10.1016/S0142-9612(01)00401-X ↗
94. 94) Nyongesa, F. W., Aduda, B. O. (2004): Fracture strength of porous ceramics: stress concentration vs minimum solid area models, AJST, Vol.5, pp.19–27.10.4314/ajst.v5i2.15336 ↗
95. 95) Tye, C. K., Sun, C., Amidon, G. E. (2005): Evaluation of the effects of tableting speed on the relationships between compaction pressure, tablet strength and tablet solid fraction, J. Pharm. Sci., Vol.94, pp.465–472.10.1002/jps.20262 ↗
96. 96) Wu, C.-Y., Best, S. M., Bentham, A. C., Hancock, B. C., Bonfield, W. (2005): A simple predictive model for the tensile strength of binary tablets, European Journal of Pharmaceutical Sciences., Vol.25, pp.331–336.10.1016/j.ejps.2005.03.004 ↗
97. 97) Sun, C. (2005): Critical roles of porosity in tableting properties characterization and solids formulation development, Amer. Pharm. Rev., Vol.8, pp.105–108.
98. 98) Xu, Z., Mansour, H. M., Hickey, A. J. (2011): Particle interactions in dry powder inhaler unit processes:a review, J. Adhesion Sci. and Tech., Vol.25, pp.451–482.10.1163/016942410X525669 ↗