journal article·2017Open access

Present Advancement in Production of Carbon Nanotubes and Their Derivatives from Industrial Waste with Promising Applications

Konrat Kerdnawee, Chompoopitch Termvidchakorn, Pacharaporn Yaisanga, Jirapat Pakchamsai, Cheewapon Chookiat, Apiluck Eiad-ua, Winadda Wongwiriyapan, Weerawut Chaiwat, Sakhon Ratchahat, Kajornsak Faungnawakij, Komkrit Suttiponparnit, Tawatchai Charinpanitkul

KONA Powder and Particle Journal· Volume 34· Issue 0

Abstract

An increase in global consumption has led to an exponential increase in industrial production activities which inevitably results in overwhelming remain of industrial waste. Consequently it has driven increasing attentions of research and development teams in various countries to propose and investigate novel methodologies to utilize such industrial waste. Instead of using as alternative energy sources, usage of industrial waste for production of carbonaceous nanomaterials has been examined via various routes, such as catalytic pyrolysis, hydrothermal treatment and so on. Meanwhile, for sustainable and secure continuity of the carbonaceous nanomaterial production, broad spectra of promising applications have also been examined. Among those emerging applications, utilization of carbonaceous nanomaterials in pollution control and prevention has been focused worldwide. Therefore, in this review, relevant research works focusing on catalytic pyrolysis of carbonaceous industrial waste for carbonaceous nanomaterial production were comprehensively analyzed and summarized. In addition, promising applications involving with antibiotic removal, spilled oil handling and pollutant gas detection were also reviewed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Nanoparticles: synthesis and applications · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Thailand

College of Nanotechnology, King Mongkut’s Institute of Technology Ladkrabang, Thailand

Environmental Engineering and Disaster Management Program, Mahidol University, Thailand

Department of Chemical Engineering, Graduate School of Science and Engineering, Tokyo Institute of Technology, Japan

National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency, Thailand

Environmental Research and Management Department, PTT Research and Technology Institute, Thailand

Funding

Silver Jubilee Fund of Chulalongkorn University · Thailand Research Fund · Chulalongkorn University

References (100+)

Show source-provided references
1. Acomb J.C., Wu C., Williams P.T., Control of steam input to the pyrolysis-gasification of waste plastics for improved production of hydrogen or carbon nanotubes, Appl. Catal. B: Environ., 147 (2014) 571–584.10.1016/j.apcatb.2013.09.018 ↗
2. Afre R.A., Soga T., Jimbo T., Kumar M., Ando Y., Sharon M., Somani P.R. and Umeno M., Carbon nanotubes by spray pyrolysis of turpentine oil at different temperatures and their studies, Microporous. Mesoporous Mater., 96 (2006) 184–190.10.1016/j.micromeso.2006.06.036 ↗
3. Ago H., Komatsu T., Ohshima S., Kuriki Y., Yumura M., Dispersion of metal nanoparticles for aligned carbon nanotube arrays, Appl. Phys. Lett., 77(2000) 79–81.10.1063/1.126883 ↗
4. Alberts P.H., Petroleum and individual polycyclic aromatic hydrocarbons. Hoffman D.J., et al. Editors, Handbook of ecotoxicology, Lewis, Boca Raton (FL), 1997, p. 330–356.
5. Altalhi T., Kumeria T., Santos A., Losic D., Synthesis of well-organised carbon nanotube membranes from non-degradable plastic bags with tuneable molecular transport: Towards nanotechnological recycling, Carbon, 63 (2013) 423–433.10.1016/j.carbon.2013.07.003 ↗
6. Alves J.O., Zhuo C., Levendis Y., Tenório J.A.S., Catalytic conversion of wastes from the bioethanol production into carbon nanomaterials, Appl. Catal. B: Environ., 106 (2011) 433–444.10.1016/j.apcatb.2011.06.001 ↗
7. Andrews R., Jacques D., Qian D., Rantell T., Multiwall Carbon Nanotubes: Synthesis and Application, Acc. Chem. Res., 35 (2002) 1008–1017.10.1021/ar010151m ↗
8. Arora N., Sharma N.N., Arc discharge synthesis of carbon nanotubes: Comprehensive review, Diam. Rel. Mater., 50 (2014) 135–150.10.1016/j.diamond.2014.10.001 ↗
9. Auer E., Freund A., Pietsch J., Tacke T., Carbons as supports for industrial precious metal catalysts, Appl. Catal. A: General, 173 (1998) 259–271.10.1016/S0926-860X(98)00184-7 ↗
10. Bai S., Li F., Yang Q.H., Cheng H.M., Bai J.B., Influence of ferrocene/benzene mole ratio on the synthesis of carbon nanostructures. Chem. Phys. Lett., 376 (2003) 83–89.10.1016/S0009-2614(03)00959-X ↗
11. Bajad A., Tiwarib S., Vijayakumara R., Synthesis and characterization of CNTs using polypropylene waste as precursor, Mater. Sci. Eng. B., 194 (2015) 68–77.10.1016/j.mseb.2015.01.004 ↗
12. Balázsi C., Sedlácková K., Llobet E., Ionescu R., Novel hexagonal WO3 nanopowder with metal decorated carbon nanotubes as NO2 gas sensor, Sensors Actuators B: Chemical, 133(2008) 151–155.10.1016/j.snb.2008.02.006 ↗
13. Bandow S., Kokai F., Takahashi K., Yudasaka M., Qin L.C., Iijima S., Interlayer spacing anomaly of single-wall carbon nanohorn aggregate, Chem. Phys. Lett., 321 (2000) 514–519.10.1016/S0009-2614(00)00353-5 ↗
14. Barreiro A., Selbmann D., Pichler T., Biedermann K., Gemming T., Rümmeli M.H., Schwalke U., Büchner B., On the effects of solution and reaction parameters for the aerosol-assisted CVD growth of long carbon nanotubes, Appl. Phys. A, 82 (2006) 719–725.10.1007/s00339-005-3436-5 ↗
15. Bazargan A., McKay G., A review—Synthesis of carbon nanotubes from plastic wastes, Chem. Eng. J., 195 (2012) 377–391.10.1016/j.cej.2012.03.077 ↗
16. Bittencourt C., Felten A., Espinosa E.H., Ionescu R., Llobet E., Correig X., Pireaux J.J., WO3 films modified with functionalised multi-wall carbon nanotubes: Morphological, compositional and gas response studies, Sensors Actuators B: Chemical, 115 (2006) 33–41.10.1016/j.snb.2005.07.067 ↗
17. Chaisitsak S., Nukeaw J., Tuantranont A., Parametric study of atmospheric-pressure single-walled carbon nanotubes growth by ferrocene–ethanol mist CVD, Diam. Relat. Mater., 16 (2007) 1958–1966.10.1016/j.diamond.2007.09.013 ↗
18. Charinpanitkul T., Sano N., Muthakarn P., Tanthapanichakoon W., Enhancing effect of monoolein surfactant on carbon nanoparticle synthesis by arc discharge in liquid, Mater. Res. Bull., 44 (2009a) 324–327.10.1016/j.materresbull.2008.05.017 ↗
19. Charinpanitkul T., Sano N., Puengjinda P., Klanwan J., Akrapattangkul N., Tanthapanichakoon W., Naphthalene as an alternative carbon source for pyrolytic synthesis of carbon nanostructures, J. Anal. Appl. Pyro., 86 (2009b) 386–390.10.1016/j.jaap.2009.08.001 ↗
20. Charinpanitkul T., Tanthapanichakoon W., Regeneration of activated carbons saturated with pyridine or phenol using supercritical water oxidation method enhanced with hydrogen peroxide, J. Ind. Eng. Chem., 17 (2011) 570–575.10.1016/j.jiec.2010.10.019 ↗
21. Colomer J.F., Stephan C., Lefrant S., van Tendeloo G., Willems I., Kónya Z., Fonseca A., Laurent C., Nagy J.B., Large-scale synthesis of single-wall carbon nanotubes by catalytic chemical vapor deposition (CCVD) method, Chem. Phys. Lett., 317 (2000) 83–89.10.1016/S0009-2614(99)01338-X ↗
22. Dai H., Carbon nanotubes: opportunities and challenges, Surf. Sci., 500 (2002) 218–241.10.1016/S0039-6028(01)01558-8 ↗
23. de Volder M.F.L., Tawfick S.H., Baughman R.H., Hart A.J., Carbon Nanotubes: Present and Future Commercial Applications, Science, 339 (2013) 535–539.10.1126/science.1222453 ↗
24. Emmenegger C., Bonard J.M., Mauron P., Sudan P., Lepora A., Grobety B., Zuttel A., Schlapbach L., Synthesis of carbon nanotubes over Fe catalyst on aluminium and suggested growth mechanism, Carbon 41 (2003) 539–547.10.1016/S0008-6223(02)00362-7 ↗
25. Endo M., Kim Y.A., Takeda T., Hong S.H., Matusita T., Hayashi T., Dresselhaus M.S., Structural characterization of carbon nanofibers obtained by hydrocarbon pyrolysis, Carbon 39 (2001) 2003–2010.10.1016/S0008-6223(01)00019-7 ↗
26. Engelbert C., Fadok J., Fuller R., Lueneburg B., Introducing the 1S.W501G Single-Shaft Combined Cycle Reference Power Plant, Proceedings of ASME Power, 2004, Baltimore, Maryland.10.1115/POWER2004-52072 ↗
27. Espinosa E.H., Ionescu R., Chambon B., Bedis G., Sotter E., Bittencourt C., Felten A., Pireaux J.J., Correig X., Llobet E., Hybrid metal oxide and multiwall carbon nanotube films for low temperature gas sensing, Sensors Actuators B: Chemical, 127 (2007) 137–142.10.1016/j.snb.2007.07.108 ↗
28. Ghasempour R., Zad A.I., Hybrid multiwalled carbon nanotubes and trioxide tungsten nanoparticles for hydrogen gas sensing, J. Phys. D: Applied Phys., 42 (2009) 165105.10.1088/0022-3727/42/16/165105 ↗
29. Gong J., Feng J., Liu J., Jiang Z., Chen X., Mijowska E., Wen X., Tang T., Catalytic carbonization of polypropylene into cupstacked carbon nanotubes with high performances in adsorption of heavy metallic ions and organic dyes, Chemical Engineering Journal, 248 (2014) 27–40.10.1016/j.cej.2014.01.107 ↗
30. Grobert N., Carbon nanotubes—becoming clean, Mater. Today, 10 (2007) 28–35.10.1016/S1369-7021(06)71789-8 ↗
31. Guo J., Wang X., Yao Y., Yang X., Liu X., Xu B., Structure of nanocarbons prepared by arc discharge in water, Mater. Chem. Phys., 105 (2007) 175–178.10.1016/j.matchemphys.2007.04.022 ↗
32. Hashishin T., Tamaki J., Conductivity-Type Sensor Based on CNT-WO3 Composite for NO2 Detection, J. Nanomater., 2008 (2008) 1–4.10.1155/2008/352854 ↗
33. Iijima S., Helical microtubules of graphitic carbon, Nature, 354 (1991) 56–58.10.1038/354056a0 ↗
34. Iijima S., Nanocarbon Materials: Synthesis and Structure Characterizations, Proceeding of the 2nd Workshop on Nanoscience : Carbon-related Systems and Nanomaterials, NCKU, Tainan, Taiwan (2012).
35. IPIECA. A Guide to Contingency Planning for Oil Spill on Water, Report Series, Vol.2, 1991.
36. Jang J., Bae J., Fabrication of polymer nanofibers and carbon nanofibers by using a salt-assisted microemulsion polymerization, Angew. Chemie, 43 (2004) 3803–3806.10.1002/anie.200353580 ↗
37. Ji L.L., Chen W., Duan L., Zhu D.Q., Mechanisms for strong adsorption of tetracycline to carbon nanotubes: A comparative study using activated carbon and graphite as adsorbents. Environ. Sci. Technol., 43 (2009), 2322–2327.10.1021/es803268b ↗
38. Jie G., Shun L.Y., Xi L.M., Product characterization of waste printed circuit board by pyrolysis, J. Anal. Appl. Pyrolysis, 83 (2008) 185–189.10.1016/j.jaap.2008.08.007 ↗
39. Khairi A.N.S., Yusof N.A., Abdullah A.H., Mohammad F., Removal of Toxic Mercury from Petroleum Oil by Newly Synthesized Molecularly-Imprinted Polymer, Int. J. Mol. Sci., 16 (2015) 10562–10577.10.3390/ijms160510562 ↗
40. Kim N.S., Lee Y.T., Park J.H., Vertically Aligned Carbon Nanotubes Grown by Pyrolysis of Iron, Cobalt, and Nickel Phthalocyanines, J. Phys. Chem. B, 107(2003) 9249–9255.10.1021/jp034895o ↗
41. Kroto H.W., Heath J.R., O’Brien S.C., Curl R.F., Smalley R.E., C60: Buckminsterfullerene, Nature, 318 (1985) 162–163.10.1038/318162a0 ↗
42. Kusaba M., Tsunawaki Y., Production of single-wall carbon nanotubes by a XeCl excimer laser ablation, Thin Solid Films, 506 (2006) 255–258.10.1016/j.tsf.2005.08.037 ↗
43. Lebel L.L., Aissa B., Khakani M.A.E., Therriault D., Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams, Comp. Sci. Technol., 70 (2010) 518–524.10.1016/j.compscitech.2009.12.004 ↗
44. Lee Y.T., Kim N.S., Park J.H., Han J.B., Choi Y.S., Ryu H., Lee H.J., Temperature-dependent growth of carbon nanotubes by pyrolysis of ferrocene and acetylene in the range between 700 and 1000 °C. Chem. Phys. Lett., 372 (2003) 853–859.10.1016/S0009-2614(03)00529-3 ↗
45. Lee W.J., Ramasamy E., Lee D.Y., Song J.S., Performance variation of carbon counter electrode based dye-sensitized solar cell, Solar Energy Mater. Solar Cells, 92 (2008) 814–818.10.1016/j.solmat.2007.12.012 ↗
46. Li X., Lei Z., Ren R., Liu J., Zuo X., Dong Z., Wang H., Wang J., Characterization of carbon nanohorn encapsulated Fe particles, Carbon, 41 (2003) 3068–3072.10.1016/S0008-6223(03)00395-6 ↗
47. Li Y., Wang H., Wang G., Gao J., Synthesis of single-walled carbon nanotubes from heavy oil residue, Chem. Eng. J., 211 (2012) 255–259.10.1016/j.cej.2012.09.031 ↗
48. Liu B.C., Lee T.J., Lee S.H., Park C.Y., Lee C.J., Large-scale synthesis of high-purity well-aligned carbon nanotubes using pyrolysis of iron(II) phthalocyanine and acetylene, Chem. Phys. Lett., 37 (2003) 55–59.10.1016/S0009-2614(03)01092-3 ↗
49. Liu H.Y., Wang K.P., Teng H.S., A simplified preparation of mesoporous carbon and the examination of the carbon accessibility for electric double layer formation, Carbon 43 (2005) 559–566.10.1016/j.carbon.2004.10.020 ↗
50. Liu X., Yang Y., Lin X., Xu B., Zhang Y., Deoiled asphalt as carbon source for preparation of various carbon materials by chemical vapor deposition, Fuel Process. Technol., 87 (2006) 919–925.10.1016/j.fuproc.2006.06.007 ↗
51. Liu T., Chen S., Liu H., Oil Adsorption and Reuse Performance of Multi-Walled Carbon Nanotubes, Procedia Engineering, 102 (2015) 1896–1902.10.1016/j.proeng.2015.01.329 ↗
52. Lu Y., Zhu Z.P., Liu Z.Y., Carbon-encapsulated Fe nanoparticles from detonation-induced pyrolysis of ferrocene, Carbon, 43 (2005a) 369–374.10.1016/j.carbon.2004.09.020 ↗
53. Lu C.S., Chung Y.L., Chang K.F., Adsorption of trihalomethanes from water with carbon nanotubes. Water Res., 39 (2005b) 1183–1189.10.1016/j.watres.2004.12.033 ↗
54. Mankhand T.R., Singh K.K., Gupta S.K., Das S., Pyrolysis of Printed Circuit Boards, Inter. J. Metal. Eng., 1(2012) 102–107.10.5923/j.ijmee.20120106.01 ↗
55. Mishra N., Das G., Ansaldo A., Genovese A., Malerba M., Povia M., Ricci D., Fabrizio E.D., Zitti E.D., Sharone M., Sharon M., Pyrolysis of waste polypropylene for the synthesis of carbon nanotubes, J. Anal. Appl. Pyro., 94 (2012) 91–98.10.1016/j.jaap.2011.11.012 ↗
56. Mohammed A.D., Isah A.G., Umaru M., Ahmed S., Abdullah Y.N., Comparative study on sulphur reduction from heavy petroleum- Solvent extraction and microwave irradiation approach, Inter. J. Energy Environ., 3 (2012) 949–960.
57. Montoro L.A., Lofrano R.C.Z., Rosolen J.M., Synthesis of single-walled and multi-walled carbon nanotubes by arc-water method, Carbon, 43 (2005) 200–203.10.1016/j.carbon.2004.08.014 ↗
58. Morales N.J., Goyanes S., Chiliotte C., Bekeris V., Candal R.J., Rubiolo G.H., One-step chemical vapor deposition synthesis of magnetic CNT–hercynite (FeAl2O4) hybrids with good aqueous colloidal stability, Carbon, 61(2013) 515–524.10.1016/j.carbon.2013.04.106 ↗
59. Nahil M.A., Wu1 C., Williams P.T., Influence of metal addition to Ni-based catalysts for the co-production of carbon nanotubes and hydrogen from the thermal processing of waste polypropylene, Fuel Proc. Technol., 130 (2015) 46–53.10.1016/j.fuproc.2014.09.022 ↗
60. Paradise M., Goswami T., Carbon nanotubes—Production and industrial applications, Mater. Desgn., 28 (2007) 1477–1489.10.1016/j.matdes.2006.03.008 ↗
61. Parkansky N., Boxman R.L., Alterkop B., Zontag I., Lereah Y., Barkay Z., Single-pulse arc production of carbon nanotubes in ambient air, J. Phys. D: Appl. Phys., 37 (2004) 2715–2722.10.1088/0022-3727/37/19/015 ↗
62. Popov V.N., Carbon nanotubes: properties and application, Mater. Sci. Eng.: R: Reports, 43 (2004) 61–102.10.1016/j.mser.2003.10.001 ↗
63. Prasek J., Drbohlavova J., Chomoucka J., Hubalek J., Jasek O., Adam V., Kizek R., Methods for carbon nanotube synthesis—review, J. Mater. Chem., 21 (2011) 15872–15884.10.1039/c1jm12254a ↗
64. Puengjinda P., Sano N., Tanthapanichakoon W., Charinpanitkul T., Selective synthesis of carbon nanotubes and nanocapsules using naphthalene pyrolysis assisted with ferrocene, J. Ind. Eng. Chem., 15 (2009) 375–380.10.1016/j.jiec.2008.11.003 ↗
65. Qiu J., Chen G., Li Z., Zhao Z., Preparation of double-walled carbon nanotubes from fullerene waste soot by arc-discharge, Carbon, 48 (2010) 1312–1320.10.1016/j.carbon.2009.01.036 ↗
66. Quan C., Li A., Gao N., Synthesis of carbon nanotubes and porous carbons from printed circuit board waste pyrolysis oil, J. Hazard. Mater., 179 (2010) 911–917.10.1016/j.jhazmat.2010.03.092 ↗
67. Ramasamy E., Won Jae Lee W.J., Lee D.Y., Song J.S., Spray coated multi-wall carbon nanotube counter electrode for tri-iodide reduction in dye-sensitized solar cells, Electrochem. Commun., 10 (2008) 1087–1089.10.1016/j.elecom.2008.05.013 ↗
68. Ren X., Chen C., Nagatsu M., Wang X., Carbon nanotubes as adsorbents in environmental pollution management: a review, Chem. Eng. J., 170 (2011) 395–410.10.1016/j.cej.2010.08.045 ↗
69. Sano N., Akazawa H., Kikuchi T., Kanki T., Separated synthesis of iron-included carbon nanocapsules and nanotubes by pyrolysis of ferrocene in pure hydrogen, Carbon, 41 (2003) 2159–2162.10.1016/S0008-6223(03)00215-X ↗
70. Sano N., Charinpanitkul T., Kanki T., Tanthapanichakoon W., Controlled synthesis of carbon nanoparticles by arc in water method with forced convective jet, J. Appl. Phys., 96 (2004) 645–649.10.1063/1.1756216 ↗
71. Sano N., Hori Y., Yamamoto S., Tamon H., A simple oxidation–reduction process for the activation of a stainless steel surface to synthesize multi-walled carbon nanotubes and its application to phenol degradation in water, Carbon 50 (2012) 115–122.10.1016/j.carbon.2011.07.059 ↗
72. Satishkumar B.C., Govindaraj A., Rao C.N.R., Bundles of aligned carbon nanotubes obtained by the pyrolysis of ferrocene-hydrocarbon mixtures: role of the metal nanoparticles produced in situ, Chem. Phys. Lett., 307 (1999) 158–162.10.1016/S0009-2614(99)00521-7 ↗
73. Sawant S.Y., Somani R.S., Panda A.B., Bajaj H.C., Formation and characterization of onions shaped carbon soot from plastic wastes, Mater. Lett., 94 (2013) 132–135.10.1016/j.matlet.2012.12.035 ↗
74. Serp P., Feurer R., Kalck P., Kihn Y., Faria J.L., Figueiredo J.L., Chemical vapour deposition process for the production of carbon nanospheres, Carbon, 39 (2001) 621–626.10.1016/S0008-6223(00)00324-9 ↗
75. Soneda Y., Toyoda M., Hashiya K., Yamashita J., Kodama M., Hatori H., Inagaki M., Huge electrochemical capacitance of exfoliated carbon fibers, Carbon, 41 (2003) 2680–2682.10.1016/S0008-6223(03)00378-6 ↗
76. Sowichai K., Supothina S., Nimittrakoolchai O.U., Seto T., Otani Y., Charinpanitkul T., Facile method to prepare magnetic multi-walled carbon nanotubes by in situ co-precipitation route, J. Ind. Eng. Chem., 182012, 1568–1571.10.1016/j.jiec.2012.04.016 ↗
77. Sun X., Li Y., Colloidal Carbon Spheres and Their Core/Shell Structures with Noble-Metal Nanoparticles, Angew. Chemie, 43 (2004) 597–601.10.1002/anie.200352386 ↗
78. Thostenson E.T., Ren Z., Chou T.W., Advances in the science and technology of carbon nanotubes and their composites: a review, Comp. Sci. Technol., 61 (2001) 1899–1912.10.1016/S0266-3538(01)00094-X ↗
79. Tsai Y.Y., Su J.S., Su C.Y., He W.H., Production of carbon nanotubes by single-pulse discharge in air, J. Mater. Proces. Technol., 209 (2009) 4413–4416.10.1016/j.jmatprotec.2008.10.049 ↗
80. Tusi M.M., Brandalise M., Verjúlio-Silva R.W.R., Correa O.V., Villalba J.C., Anaissi F.J., Neto A.O., Linardi M., Spinacé E.V., Preparation of PtRu/C electrocatalysts by hydrothermal carbonization using different carbon sources, Proceeding of the 10th Inter. Symp. “Scientific Bases for the Preparation of Heterogeneous Catalysts” edited by Gaigneaux E.M., Devillers M., Hermans S., Jacobs P., Martens J., Ruiz P.. (2010)10.1590/S1516-14392007000200013 ↗
81. Vijayaraghavan G., Stevenson K.J., Synergistic assembly of dendrimer-templated platinum catalysts on nitrogen-doped carbon nanotube electrodes for oxygen reduction, Langmuir, 23 (2007) 5279–5282.10.1021/la0637263 ↗
82. Vilatela J., Rabanal M., Cervantes-Sodi F., A Spray Pyrolysis Method to Grow Carbon Nanotubes on Carbon Fibres, Steel and Ceramic Bricks., J Nanosci. Nanotech., 15 (2015) 2858–2864.10.1166/jnn.2015.9601 ↗
83. Walkup P.C., Polentz L.M., Smith J.D., Peterson P.L., Study of equipment and methods for removing oil from harbor waters, Proceedings of Joint Conference on Prevention and Control of Oil Spills, 15–17 December 1969, New York, 237–248.10.7901/2169-3358-1969-1-237 ↗
84. Wang S.G., Liu X.W., Gong W.X., et al., Adsorption of fulvic acids from aqueous solutions by carbon nanotubes, J. Chem. Technol. Biotechnol., 82 (2007) 698–704.10.1002/jctb.1708 ↗
85. Wang X., Tao S., Xing B., Sorption and Competition of Aromatic Compounds and Humic Acid on Multiwalled Carbon Nanotubes, Environ. Sci. Technol, 43(2009) 6214–6219.10.1021/es901062t ↗
86. Wei Q.F., Mather R.R., Fotheringham A.F., Yang R.D., ESEM Study of Oil Wetting Behaviour of Polypropylene Fibres, Spill Sci. Technol. Bull., 46 (2003) 780–783.10.1016/S0025-326X(03)00042-0 ↗
87. White I.C., Molloy F., Factors that Determine the Cost of Oil Spills, Proceeding of International Oil Spill Conference 2003, Vancouver, Canada, 6–11 April 2003.10.7901/2169-3358-2003-1-1225 ↗
88. Xiao Y., Liu Y., Cheng L., Yuan D., Zhang J., Gu Y., Sun G., Flower-like carbon materials prepared via a simple solvothermal route, Carbon, 44 (2006) 1589–1591.10.1016/j.carbon.2006.02.006 ↗
89. Xu C., Cheng L., Shen P., Liu Y., Methanol and ethanol electrooxidation on Pt and Pd supported on carbon microspheres in alkaline media, Electrochem. Commun., 9 (2007) 997–1001.10.1016/j.elecom.2006.12.003 ↗
90. Yang R., Qiu X., Zhang H., Li J., Zhu W., Wang Z., Huang X., Chen L., Monodispersed hard carbon spherules as a catalyst support for the electrooxidation of methanol, Carbon 43 (2005) 11–16.10.1016/j.carbon.2004.08.008 ↗
91. Yang W., Sun W.J., Chu W., Jiang C.F., Wen J., Synthesis of carbon nanotubes using scrap tyre rubber as carbon source, Chinese Chem. Lett., 23 (2012) 363–366.10.1016/j.cclet.2012.01.006 ↗
92. Yao Z., Zhu X., Li X., Xie Y., Synthesis of novel Y-junction hollow carbon nanotrees, Carbon, 45 (2007) 1566–1570.10.1016/j.carbon.2007.02.030 ↗
93. Yoon S., Lee J.W., Hyeon T., Oh S.M., Electric Double-Layer Capacitor Performance of a New Mesoporous Carbon, J. Electrochem. Soc. 147 (2000) 2507–2512.10.1149/1.1393561 ↗
94. Yuan D., Xu C., Liu Y., Tan S., Wang X., Wei Z., Shen P.K., Synthesis of coin-like hollow carbon and performance as Pd catalyst support for methanol electrooxidation, Electrochem. Commu., 9 (2007) 2473–2478.10.1016/j.elecom.2007.07.027 ↗
95. Zeng Q., Li Z., Zhou Y., Synthesis and Application of Carbon Nanotubes, J. Nat. Gas Chem., 15 (2006) 235–246.10.1016/S1003-9953(06)60032-7 ↗
96. Zhang H., Ding Y., Wu C., Chen Y., Zhu Y., He Y., Zhong S., The effect of laser power on the formation of carbon nanotubes prepared in CO2 continuous wave laser ablation at room temperature, Physica B: Condensed Matter, 325 (2003) 224–229.10.1016/S0921-4526(02)01528-4 ↗
97. Zhang J., Li J., Cao J., Qian Y., Synthesis and characterization of larger diameter carbon nanotubes from catalytic pyrolysis of polypropylene, Materials Letters, 62 (2008) 1839–1842.10.1016/j.matlet.2007.10.015 ↗
98. Zhang S.J., Shao T., Kose H.S., Karanfil T., Adsorption kinetics of aromatic compounds on carbon nanotubes and activated carbons, Environ. Toxic. Chem., 31(2012) 79–85.10.1002/etc.724 ↗
99. Zhuo C., Hall B., Richter H., Levendis Y., Synthesis of carbon nanotubes by sequential pyrolysis and combustion of polyethylene, Carbon, 48 (2010) 4024–4034.10.1016/j.carbon.2010.07.007 ↗
100. Zubaidy I.A.H., Tarsh F.B., Darwish N.N., Majeed B.S.S.A., Sharafi A.A., Chacra L.A., Adsorption Process of Sulfur Removal from Diesel Oil Using Sorbent Materials, J. Clean Energy Technol., 1 (2013) 66–68.10.7763/JOCET.2013.V1.16 ↗