Experimental Methods for Model Parameters in the Discrete Element Method
Source abstract
Abstract
The Discrete Element Method (DEM) is a widely used numerical method for studying, analyzing, and optimizing particulate processes. Based on contact models, DEM can predict the interactions of particles and particles with wall surfaces. Various contact models have been developed that consider various deformation and adhesion behaviors, particle shapes, and surface morphologies. However, accurate prediction of the real behavior requires experimental estimation and calibration of the model parameters for the studied particles. The objective of this paper is to provide a comprehensive overview of recent advancements in particle-property measurement methods, with a particular focus on the parameters of contact models. The measurement methods are classified into different categories, including static and dynamic loading and single particle and particle bed tests, with and without consideration of the surrounding liquid. A range of measurement techniques for estimating elastic and plastic properties, as well as friction and restitution coefficients in both air and liquid environments, are described, including nano- and tribo-indentation, compression, and impact tests. The applicability of these techniques was demonstrated using our own elastic–plastic model. The impacts of various influencing factors on material parameters and contact interactions are discussed. This overview can help identify suitable experimental techniques for calibrating and validating DEM models.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical and Thermal Properties Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Particle Process Engineering, University of Kaiserslautern-Landau (RPTU), Germany
References (100+)
Show source-provided references
1. Abi-Mansour A., McClure S., Gentzler M., XRCT characterization of mesoscopic structure in poured and tapped cohesive powders and prediction by DEM, Powder Technology, 330 (2018) 386–396. https://doi.org/10.1016/j.powtec.2018.01.08110.1016/j.powtec.2018.01.081 ↗
2. Adams M.J., Lawrence C.J., Urso M., Rance J., Modelling collisions of soft agglomerates at the continuum length scale, Powder Technology, 140 (2004) 268–279. https://doi.org/10.1016/j.powtec.2004.01.01310.1016/j.powtec.2004.01.013 ↗
3. Adams M.J., Perchard V., The cohesive forces between particles with interstitial liquid, Institution of Chemical Engineering Symposium Series, 91 (1985) 147–160.
4. Alizadeh M., Hassanpour A., Pasha M., Ghadiri M., Bayly A., The effect of particle shape on predicted segregation in binary powder mixtures, Powder Technology, 319 (2017) 313–322. https://doi.org/10.1016/j.powtec.2017.06.05910.1016/j.powtec.2017.06.059 ↗
5. Amoozegar A., Heitman J.L., Kranz C.N., Comparison of soil particle density determined by a gas pycnometer using helium, nitrogen, and air, Soil Science Society of America Journal, 87 (2023) 1–12. https://doi.org/10.1002/saj2.2047610.1002/saj2.20476 ↗
6. Angus A., Yahia L.A.A., Maione R., Khala M., Hare C., Ozel A., Ocone R., Calibrating friction coefficients in discrete element method simulations with shear-cell experiments, Powder Technology, 372 (2020) 290–304. https://doi.org/10.1016/j.powtec.2020.05.07910.1016/j.powtec.2020.05.079 ↗
7. Antonyuk S., Heinrich S., Deen N., Kuipers H., Influence of liquid layers on energy absorption during particle impact, Particuology, 7 (2009) 245–259. https://doi.org/10.1016/j.partic.2009.04.00610.1016/j.partic.2009.04.006 ↗
8. Antonyuk S., Heinrich S., Gurikov P., Raman S., Smirnova I., Influence of coating and wetting on the mechanical behaviour of highly porous cylindrical aerogel particles, Powder Technology, 285 (2015) 34–43. https://doi.org/10.1016/j.powtec.2015.05.00410.1016/j.powtec.2015.05.004 ↗
9. Antonyuk S., Heinrich S., Tomas J., Deen N.G., van Buijtenen M.S., Kuipers J.A.M., Energy absorption during compression and impact of dry elastic-plastic spherical granules, Granular Matter, 12 (2010) 15–47. https://doi.org/10.1007/s10035-009-0161-310.1007/s10035-009-0161-3 ↗
10. Antonyuk S., Particles in Contact: Micro Mechanics, Micro Process Dynamics and Particle Collective, Springer International Publishing, Cham, 2019, ISBN: 9783030158989. https://doi.org/10.1007/978-3-030-15899-610.1007/978-3-030-15899-6 ↗
11. Aurich J.C., Altherr N., Kieren-Ehses S., Kirsch B., Mayer T., Creating surface morphologies by micro milling and micro grinding, in: Aurich J.C., Hasse H. (Eds.), Component Surfaces, Springer International Publishing, Cham, 2024, ISBN:9783031355745, pp. 67–95. https://doi.org/10.1007/978-3-031-35575-210.1007/978-3-031-35575-2_4 ↗
12. Bagheri G.H., Bonadonna C., Manzella I., Vonlanthen P., On the characterization of size and shape of irregular particles, Powder Technology, 270 (2015) 141–153. https://doi.org/10.1016/j.powtec.2014.10.01510.1016/j.powtec.2014.10.015 ↗
13. Barnocky G., Davis R.H., Elastohydrodynamic collision and rebound of spheres: experimental verification, The Physics of Fluids, 31 (1988) 1324–1329. https://doi.org/10.1063/1.86672510.1063/1.866725 ↗
14. Barrett E.P., Joyner L.G., Halenda P.P., The determination of pore volume and area distributions in porous substances. I. computations from nitrogen isotherms, Journal of the American Chemical Society, 73 (1951) 373–380. https://doi.org/10.1021/ja01145a12610.1021/ja01145a126 ↗
15. Bhattad A., Review on viscosity measurement: devices, methods and models, Journal of Thermal Analysis and Calorimetry, 148 (2023) 6527–6543. https://doi.org/10.1007/s10973-023-12214-010.1007/s10973-023-12214-0 ↗
16. Bilz R., de Payrebrune K.M., Investigation of the influence of velocity in a tribological three-body system containing a single layer of rolling hard particles from a mechanical point of view, Tribology International, 159 (2021) 106948. https://doi.org/10.1016/j.triboint.2021.10694810.1016/j.triboint.2021.106948 ↗
17. Breuninger P., Weis D., Behrendt I., Grohn P., Krull F., Antonyuk S., CFD–DEM simulation of fine particles in a spouted bed apparatus with a Wurster tube, Particuology, 42 (2019) 114–125. https://doi.org/10.1016/j.partic.2018.03.01510.1016/j.partic.2018.03.015 ↗
18. Brilliantov N.V., Spahn F., Hertzsch J.M., Pöschel T., Model for collisions in granular gases, Physical Review E, 53 (1996) 5382–5392. https://doi.org/10.1103/PhysRevE.53.538210.1103/PhysRevE.53.5382 ↗
19. Buck B., Tang Y., Deen N.G., Kuipers J., Heinrich S., Dynamics of wet particle–wall collisions: Influence of wetting condition, Chemical Engineering Research and Design, 135 (2018) 21–29. https://doi.org/10.1016/j.cherd.2018.05.01410.1016/j.cherd.2018.05.014 ↗
20. Bunke F., Pietsch-Braune S., Heinrich S., Three-dimensional measurement method of binary particle collisions under dry and wet conditions, Chemical Engineering Journal, 489 (2024) 151016. https://doi.org/10.1016/j.cej.2024.15101610.1016/j.cej.2024.151016 ↗
21. Burmeister C.F., Hofer M., Molaiyan P., Michalowski P., Kwade A., Characterization of stressing conditions in a high energy ball mill by discrete element simulations, Processes, 10 (2022) 692. https://doi.org/10.3390/pr1004069210.3390/pr10040692 ↗
22. Butt H.-J., Cappella B., Kappl M., Force measurements with the atomic force microscope: technique, interpretation and applications, Surface Science Reports, 59 (2005) 1–152. https://doi.org/10.1016/j.surfrep.2005.08.00310.1016/j.surfrep.2005.08.003 ↗
23. Butt H.-J., Liu J., Koynov K., Straub B., Hinduja C., Roismann I., Berger R., Li X., Vollmer D., Steffen W., Kappl M., Contact angle hysteresis, Current Opinion in Colloid & Interface Science, 59 (2022) 101574. https://doi.org/10.1016/j.cocis.2022.10157410.1016/j.cocis.2022.101574 ↗
24. Carr M.J., Roessler T., Robinson P.W., Otto H., Richter C., Katterfeld A., Wheeler C.A., Calibration procedure of Discrete Element Method (DEM) parameters for wet and sticky bulk materials, Powder Technology, 429 (2023) 118919. https://doi.org/10.1016/j.powtec.2023.11891910.1016/j.powtec.2023.118919 ↗
25. Cleary P.W., Large scale industrial DEM modelling, Engineering Computations, 21 (2004) 169–204. https://doi.org/10.1108/0264440041051973010.1108/02644400410519730 ↗
26. Coetzee C., Calibration of the discrete element method: strategies for spherical and non-spherical particles, Powder Technology, 364 (2020) 851–878. https://doi.org/10.1016/j.powtec.2020.01.07610.1016/j.powtec.2020.01.076 ↗
27. Coetzee C.J., Review: calibration of the discrete element method, Powder Technology, 310 (2017) 104–142. https://doi.org/10.1016/j.powtec.2017.01.01510.1016/j.powtec.2017.01.015 ↗
28. Coetzee C.J., Particle upscaling: calibration and validation of the discrete element method, Powder Technology, 344 (2019) 487–503. https://doi.org/10.1016/j.powtec.2018.12.02210.1016/j.powtec.2018.12.022 ↗
29. Coetzee C.J., Els D., Calibration of discrete element parameters and the modelling of silo discharge and bucket filling, Computers and Electronics in Agriculture, 65 (2009) 198–212. https://doi.org/10.1016/j.compag.2008.10.00210.1016/j.compag.2008.10.002 ↗
30. Coetzee C.J., Scheffler O.C., Review: the calibration of DEM parameters for the bulk modelling of cohesive materials, Processes, 11 (2023) 5. https://doi.org/10.3390/pr1101000510.3390/pr11010005 ↗
31. Crüger B., Heinrich S., Antonyuk S., Deen N.G., Kuipers J., Experimental study of oblique impact of particles on wet surfaces, Chemical Engineering Research and Design, 110 (2016a) 209–219. https://doi.org/10.1016/j.cherd.2016.01.02410.1016/j.cherd.2016.01.024 ↗
32. Crüger B., Salikov V., Heinrich S., Antonyuk S., Sutkar V.S., Deen N.G., Kuipers J., Coefficient of restitution for particles impacting on wet surfaces: an improved experimental approach, Particuology, 25 (2016b) 1–9. https://doi.org/10.1016/j.partic.2015.04.00210.1016/j.partic.2015.04.002 ↗
33. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Géotechnique, 29 (1979) 47–65. https://doi.org/10.1680/geot.1979.29.1.4710.1680/geot.1979.29.1.47 ↗
34. Cunha R.N., Santos K.G., Lima R.N., Duarte C.R., Barrozo M., Repose angle of monoparticles and binary mixture: an experimental and simulation study, Powder Technology, 303 (2016) 203–211. https://doi.org/10.1016/j.powtec.2016.09.02310.1016/j.powtec.2016.09.023 ↗
35. Davis R.H., Rager D.A., Good B.T., Elastohydrodynamic rebound of spheres from coated surfaces, Journal of Fluid Mechanics, 468 (2002) 107–119. https://doi.org/10.1017/S002211200200148910.1017/S0022112002001489 ↗
36. Deen N.G., van Sint Annaland M., van der Hoef M.A., Kuipers J., Review of discrete particle modeling of fluidized beds, Chemical Engineering Science, 62 (2007) 28–44. https://doi.org/10.1016/j.ces.2006.08.01410.1016/j.ces.2006.08.014 ↗
37. Deshpande R., Antonyuk S., Iliev O., Study of the filter cake formed due to the sedimentation of monodispersed and bidispersed particles using discrete element method–computational fluid dynamics simulations, AIChE Journal, 65 (2019) 1294–1303. https://doi.org/10.1002/aic.1652910.1002/aic.16529 ↗
38. Deshpande R., Antonyuk S., Iliev O., DEM-CFD study of the filter cake formation process due to non-spherical particles, Particuology, 53 (2020) 48–57. https://doi.org/10.1016/j.partic.2020.01.00310.1016/j.partic.2020.01.003 ↗
39. Di Maio F.P., Di Renzo A., DEM-CFD simulations of fluidized beds with application in mixing dynamics, KONA Powder and Particle Journal, 25 (2007) 205–216. https://doi.org/10.14356/kona.200701810.14356/kona.2007018 ↗
40. Ditscherlein R., Furat O., Langlard M. de, Martins de Souza E Silva J., Sygusch J., Rudolph M., Leißner T., Schmidt V., Peuker U.A., Multiscale tomographic analysis for micron-sized particulate samples, Microscopy and Microanalysis, 26 (2020) 676–688. https://doi.org/10.1017/S143192762000173710.1017/S1431927620001737 ↗
41. Dong H., Moys M.H., Experimental study of oblique impacts with initial spin, Powder Technology, 161 (2006) 22–31. https://doi.org/10.1016/j.powtec.2005.05.04610.1016/j.powtec.2005.05.046 ↗
42. Dong M., Li X., Mei Y., Li S., Experimental and theoretical analyses on the effect of physical properties and humidity of fly ash impacting on a flat surface, Journal of Aerosol Science, 117 (2018) 85–99. https://doi.org/10.1016/j.jaerosci.2017.12.01210.1016/j.jaerosci.2017.12.012 ↗
43. Dosta M., Dale S., Antonyuk S., Wassgren C., Heinrich S., Litster J.D., Numerical and experimental analysis of influence of granule microstructure on its compression breakage, Powder Technology, 299 (2016) 87–97. https://doi.org/10.1016/j.powtec.2016.05.00510.1016/j.powtec.2016.05.005 ↗
44. Endres S.C., Ciacchi L.C., Mädler L., A review of contact force models between nanoparticles in agglomerates, aggregates, and films, Journal of Aerosol Science, 153 (2021) 105719. https://doi.org/10.1016/j.jaerosci.2020.10571910.1016/j.jaerosci.2020.105719 ↗
45. Ennis B.J., Tardos G., Pfeffer R., A microlevel-based characterization of granulation phenomena, Powder Technology, 65 (1991) 257–272. https://doi.org/10.1016/0032-5910(91)80189-P10.1016/0032-5910(91)80189-P ↗
46. Fischer-Cripps A.C., Nicholson D.W., Nanoindentation. Mechanical engineering series, Applied Mechanics Reviews, 57 (2004) 145–160. https://doi.org/10.1115/1.170462510.1115/1.1687409 ↗
47. Forgber T., Khinast J.G., Fink E., A hybrid workflow for investigating wide DEM parameter spaces, Powder Technology, 404 (2022) 117440. https://doi.org/10.1016/j.powtec.2022.11744010.1016/j.powtec.2022.117440 ↗
48. Franses E.I., Basaran O.A., Chang C.-H., Techniques to measure dynamic surface tension, Current Opinion in Colloid & Interface Science, 1 (1996) 296–303. https://doi.org/10.1016/S1359-0294(96)80018-510.1016/S1359-0294(96)80018-5 ↗
49. Fries L., Antonyuk S., Heinrich S., Palzer S., DEM–CFD modeling of a fluidized bed spray granulator, Chemical Engineering Science, 66 (2011) 2340–2355. https://doi.org/10.1016/j.ces.2011.02.03810.1016/j.ces.2011.02.038 ↗
50. Fu J., Adams M.J., Reynolds G.K., Salman A.D., Hounslow M.J., Impact deformation and rebound of wet granules, Powder Technology, 140 (2004) 248–257. https://doi.org/10.1016/j.powtec.2004.01.01210.1016/j.powtec.2004.01.012 ↗
51. Fuchs R., Weinhart T., Meyer J., Zhuang H., Staedler T., Jiang X., Luding S., Rolling, sliding and torsion of micron-sized silica particles: experimental, numerical and theoretical analysis, Granular Matter, 16 (2014) 281–297. https://doi.org/10.1007/s10035-014-0481-910.1007/s10035-014-0481-9 ↗
52. Gao Y., Simone G. de, Koorapaty M., Calibration and verification of DEM parameters for the quantitative simulation of pharmaceutical powder compression process, Powder Technology, 378 (2021) 160–171. https://doi.org/10.1016/j.powtec.2020.09.01910.1016/j.powtec.2020.09.019 ↗
53. Ge R., Boyce A.M., Shui Zhang Y., Shearing P.R., Cumming D.J., Smith R.M., Discrete element method and electrochemical modelling of lithium ion cathode structures characterised by X-ray computed tomography, Chemical Engineering Journal, 465 (2023) 142749. https://doi.org/10.1016/j.cej.2023.14274910.1016/j.cej.2023.142749 ↗
54. Giannis K., Kwade A., Finke J.H., Schilde C., The effect of particle shape on the compaction of realistic non-spherical particles-a multi-contact dem study, Pharmaceutics, 15 (2023) 909. https://doi.org/10.3390/pharmaceutics1503090910.3390/pharmaceutics15030909 ↗
55. Goldman A.J., Cox R.G., Brenner H., Slow viscous motion of a sphere parallel to a plane wall—I Motion through a quiescent fluid, Chemical Engineering Science, 22 (1967) 637–651. https://doi.org/10.1016/0009-2509(67)80047-210.1016/0009-2509(67)80047-2 ↗
56. Gollwitzer F., Rehberg I., Kruelle C.A., Huang K., Coefficient of restitution for wet particles, Physical Review E, 86 (2012) 11303. https://doi.org/10.1103/PhysRevE.86.01130310.1103/PhysRevE.86.011303 ↗
57. Golshan S., Sotudeh-Gharebagh R., Zarghami R., Mostoufi N., Blais B., Kuipers J., Review and implementation of CFD-DEM applied to chemical process systems, Chemical Engineering Science, 221 (2020) 115646. https://doi.org/10.1016/j.ces.2020.11564610.1016/j.ces.2020.115646 ↗
58. Götzinger M., Peukert W., Dispersive forces of particle–surface interactions: direct AFM measurements and modelling, Powder Technology, 130 (2003) 102–109. https://doi.org/10.1016/S0032-5910(02)00234-610.1016/S0032-5910(02)00234-6 ↗
59. Grima A.P., Wypych P.W., Development and validation of calibration methods for discrete element modelling, Granular Matter, 13 (2011) 127–132. https://doi.org/10.1007/s10035-010-0197-410.1007/s10035-010-0197-4 ↗
60. Grohn P., Heinrich S., Antonyuk S., Numerical investigation of the particle dynamics in a rotorgranulator depending on the properties of the coating liquid, Pharmaceutics, 15 (2023a) 469. https://doi.org/10.3390/pharmaceutics1502046910.3390/pharmaceutics15020469 ↗
61. Grohn P., Oesau T., Heinrich S., Antonyuk S., Investigation of the influence of impact velocity and liquid bridge volume on the maximum liquid bridge length, Advanced Powder Technology, 33 (2022a) 103630. https://doi.org/10.1016/j.apt.2022.10363010.1016/j.apt.2022.103630 ↗
62. Grohn P., Oesau T., Heinrich S., Antonyuk S., Investigation of the influence of wetting on the particle dynamics in a fluidized bed rotor granulator by MPT measurements and CFD-DEM simulations, Powder Technology, 408 (2022b) 117736. https://doi.org/10.1016/j.powtec.2022.11773610.1016/j.powtec.2022.117736 ↗
63. Grohn P., Schaedler L., Atxutegi A., Heinrich S., Antonyuk S., CFD-DEM simulation of superquadric cylindrical particles in a spouted bed and a rotor granulator, Chemie Ingenieur Technik, 95 (2023b) 244–255. https://doi.org/10.1002/cite.20220012110.1002/cite.202200121 ↗
64. Grohn P., Weis D., Thommes M., Heinrich S., Antonyuk S., Contact behavior of microcrystalline cellulose pellets depending on their water content, Chemical Engineering & Technology, 43 (2020) 887–895. https://doi.org/10.1002/ceat.20190051710.1002/ceat.201900517 ↗
65. Guo Y., Wu C.-Y., Kafui K.D., Thornton C., 3D DEM/CFD analysis of size-induced segregation during die filling, Powder Technology, 206 (2011) 177–188. https://doi.org/10.1016/j.powtec.2010.05.02910.1016/j.powtec.2010.05.029 ↗
66. Hadi A., Roeplal R., Pang Y., Schott D.L., DEM modelling of segregation in granular materials: a review, KONA Powder and Particle Journal, 41 (2024) 78–107. https://doi.org/10.14356/kona.202401710.14356/kona.2024017 ↗
67. Han F., Ganju E., Salgado R., Prezzi M., Effects of interface roughness, particle geometry, and gradation on the sand–steel interface friction angle, Journal of Geotechnical and Geoenvironmental Engineering, 144 (2018) 04018096. https://doi.org/10.1061/(ASCE)GT.1943-5606.000199010.1061/(ASCE)GT.1943-5606.0001990 ↗
68. Handl L., Torbahn L., Spettl A., Schmidt V., Kwade A., Structural analysis and tracking of micron-sized glass particles during shear deformation: a study based on time-resolved tomographic data, Advanced Powder Technology, 28 (2017) 1920–1929. https://doi.org/10.1016/j.apt.2017.05.00210.1016/j.apt.2017.05.002 ↗
69. Härtl J., Ooi J.Y., Numerical investigation of particle shape and particle friction on limiting bulk friction in direct shear tests and comparison with experiments, Powder Technology, 212 (2011) 231–239. https://doi.org/10.1016/j.powtec.2011.05.02210.1016/j.powtec.2011.05.022 ↗
70. Hayashi K., Nakamura H., Watano S., Numerical study on granule aggregation and breakage in fluidized bed granulation by a novel PBM with DEM-CFD coupling approach, Powder Technology, 360 (2020) 1321–1336. https://doi.org/10.1016/j.powtec.2019.11.02710.1016/j.powtec.2019.11.027 ↗
71. Herminghaus S., Semprebon C., Brinkmann M., Capillary Interaction in Wet Granular Assemblies: Part 1, in: Antonyuk S. (Ed.), Particles in Contact, Springer International Publishing, Cham, 2019, ISBN: 9783030158989, pp. 239–275. https://doi.org/10.1007/978-3-030-15899-6_810.1007/978-3-030-15899-6_8 ↗
72. Hertz H., Ueber die Berührung fester elastischer Körper, Journal für die reine und angewandte Mathematik, 92 (1882) 156–171. https://doi.org/10.1515/crll.1882.92.15610.1515/crll.1882.92.156 ↗
73. Hesse R., Krull F., Antonyuk S., Experimentally calibrated CFD-DEM study of air impairment during powder discharge for varying hopper configurations, Powder Technology, 372 (2020) 404–419. https://doi.org/10.1016/j.powtec.2020.05.11310.1016/j.powtec.2020.05.113 ↗
74. Hesse R., Krull F., Antonyuk S., Prediction of random packing density and flowability for non-spherical particles by deep convolutional neural networks and Discrete Element Method simulations, Powder Technology, 393 (2021) 559–581. https://doi.org/10.1016/j.powtec.2021.07.05610.1016/j.powtec.2021.07.056 ↗
75. Hesse R., Lösch P., Antonyuk S., CFD-DEM analysis of internal packing structure and pressure characteristics in compressible filter cakes using a novel elastic–plastic contact model, Advanced Powder Technology, 34 (2023) 104062. https://doi.org/10.1016/j.apt.2023.10406210.1016/j.apt.2023.104062 ↗
76. Hlosta J., Žurovec D., Rozbroj J., Ramírez-Gómez Á., Nečas J., Zegzulka J., Experimental determination of particle–particle restitution coefficient via double pendulum method, Chemical Engineering Research and Design, 135 (2018) 222–233. https://doi.org/10.1016/j.cherd.2018.05.01610.1016/j.cherd.2018.05.016 ↗
77. Hodges C.S., Cleaver J.A.S., Ghadiri M., Jones R., Pollock H.M., Forces between polystyrene particles in water using the AFM: pull-off force vs particle size, Langmuir: the ACS Journal of Surfaces and Colloids, 18 (2002) 5741–5748. https://doi.org/10.1021/la025604q10.1021/la025604q ↗
78. Horváth G., Kawazoe K., Method for the calculation of effective pore size distribution in molecular sieve carbon, Journal of Chemical Engineering of Japan, 16 (1983) 470–475. https://doi.org/10.1252/jcej.16.47010.1252/jcej.16.470 ↗
79. Hoshishima C., Ohsaki S., Nakamura H., Watano S., Parameter calibration of discrete element method modelling for cohesive and non-spherical particles of powder, Powder Technology, 386 (2021) 199–208. https://doi.org/10.1016/j.powtec.2021.03.04410.1016/j.powtec.2021.03.044 ↗
80. Israelachvili J.N., Intermolecular and Surface Forces, third ed., Elsevier Science, Burlington, 2011, ISBN: 9780123919274. https://doi.org/10.1016/C2011-0-05119-010.1016/C2011-0-05119-0 ↗
81. Iveson S.M., Beathe J.A., Page N.W., The dynamic strength of partially saturated powder compacts: the effect of liquid properties, Powder Technology, 127 (2002) 149–161. https://doi.org/10.1016/S0032-5910(02)00118-310.1016/S0032-5910(02)00118-3 ↗
82. Iveson S.M., Litster J.D., Hapgood K., Ennis B.J., Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review, Powder Technology, 117 (2001) 3–39. https://doi.org/10.1016/S0032-5910(01)00313-810.1016/S0032-5910(01)00313-8 ↗
83. Jain D., Deen N.G., Kuipers J., Antonyuk S., Heinrich S., Direct numerical simulation of particle impact on thin liquid films using a combined volume of fluid and immersed boundary method, Chemical Engineering Science, 69 (2012) 530–540. https://doi.org/10.1016/j.ces.2011.11.01810.1016/j.ces.2011.11.018 ↗
84. Jajcevic D., Siegmann E., Radeke C., Khinast J.G., Large-scale CFD–DEM simulations of fluidized granular systems, Chemical Engineering Science, 98 (2013) 298–310. https://doi.org/10.1016/j.ces.2013.05.01410.1016/j.ces.2013.05.014 ↗
85. Jasevičius R., Baronas R., Kruggel-Emden H., Numerical modelling of the normal adhesive elastic–plastic interaction of a bacterium, Advanced Powder Technology, 26 (2015) 742–752. https://doi.org/10.1016/j.apt.2015.04.01010.1016/j.apt.2015.04.010 ↗
86. Ji S., Wang S., Zhou Z., Influence of particle shape on mixing rate in rotating drums based on super-quadric DEM simulations, Advanced Powder Technology, 31 (2020) 3540–3550. https://doi.org/10.1016/j.apt.2020.06.04010.1016/j.apt.2020.06.040 ↗
87. Ji X., Chen Y., Hou Y., Dai C., Chen B., Zou H., Surface microscopic properties of various aggregates using laser scanning confocal microscope, Construction and Building Materials, 290 (2021) 123222. https://doi.org/10.1016/j.conbuildmat.2021.12322210.1016/j.conbuildmat.2021.123222 ↗
88. Johnson K.L., Contact Mechanics, Cambridge University Press, Cambridge, 1987, ISBN: 9780521347969.
89. Johnson K.L., Pollock H.M., The role of adhesion in the impact of elastic spheres, Journal of Adhesion Science and Technology, 8 (1994) 1323–1332. https://doi.org/10.1163/156856194X0063610.1163/156856194X00636 ↗
90. Jones R., From single particle AFM studies of adhesion and friction to bulk flow: forging the links, Granular Matter, 4 (2003) 191–204. https://doi.org/10.1007/s10035-002-0122-610.1007/s10035-002-0122-6 ↗
91. Joseph G.G., Zenit R., Hunt M.L., Rosenwinkel A.M., Particle–wall collisions in a viscous fluid, Journal of Fluid Mechanics, 433 (2001) 329–346. https://doi.org/10.1017/S002211200100347010.1017/S0022112001003470 ↗
92. Kappl M., Butt H.-J., The Colloidal probe technique and its application to adhesion force measurements, Particle & Particle Systems Characterization, 19 (2002) 129–143. https://doi.org/10.1002/1521-4117(200207)19:3<129::AID-PPSC129>3.0.CO;2-G10.1002/1521-4117(200207)19:3<129::AID-PPSC129>3.0.CO;2-G ↗
93. Ketterhagen W., Wassgren C., A perspective on calibration and application of DEM models for simulation of industrial bulk powder processes, Powder Technology, 402 (2022) 117301. https://doi.org/10.1016/j.powtec.2022.11730110.1016/j.powtec.2022.117301 ↗
94. Kharaz A.H., Gorham D.A., Salman A.D., An experimental study of the elastic rebound of spheres, Powder Technology, 120 (2001) 281–291. https://doi.org/10.1016/S0032-5910(01)00283-210.1016/S0032-5910(01)00283-2 ↗
95. Khazeni A., Mansourpour Z., Influence of non-spherical shape approximation on DEM simulation accuracy by multi-sphere method, Powder Technology, 332 (2018) 265–278. https://doi.org/10.1016/j.powtec.2018.03.03010.1016/j.powtec.2018.03.030 ↗
96. Kildashti K., Dong K., Yu A., Contact force models for non-spherical particles with different surface properties: a review, Powder Technology, 418 (2023) 118323. https://doi.org/10.1016/j.powtec.2023.11832310.1016/j.powtec.2023.118323 ↗
97. Kruggel-Emden H., Rickelt S., Wirtz S., Scherer V., A study on the validity of the multi-sphere Discrete Element Method, Powder Technology, 188 (2008a) 153–165. https://doi.org/10.1016/j.powtec.2008.04.03710.1016/j.powtec.2008.04.037 ↗
98. Kruggel-Emden H., Simsek E., Rickelt S., Wirtz S., Scherer V., Review and extension of normal force models for the Discrete Element Method, Powder Technology, 171 (2007) 157–173. https://doi.org/10.1016/j.powtec.2006.10.00410.1016/j.powtec.2006.10.004 ↗
99. Kruggel-Emden H., Wirtz S., Scherer V., A study on tangential force laws applicable to the discrete element method (DEM) for materials with viscoelastic or plastic behavior, Chemical Engineering Science, 63 (2008b) 1523–1541. https://doi.org/10.1016/j.ces.2007.11.02510.1016/j.ces.2007.11.025 ↗
100. Krull F., Hesse R., Breuninger P., Antonyuk S., Impact behaviour of microparticles with microstructured surfaces: experimental study and DEM simulation, Chemical Engineering Research and Design, 135 (2018) 175–184. https://doi.org/10.1016/j.cherd.2018.05.03310.1016/j.cherd.2018.05.033 ↗