A Hybrid PBM-DEM Model of High-Pressure Grinding Rolls Applied to Iron Ore Pellet Feed Pressing
Source abstract
Abstract
Mathematical models of high-pressure grinding rolls (HPGR) have attracted great attention, owing to their role in optimization of operating machines as well as in the design and selection of new ones. Although population balance models (PBM) and the discrete element method (DEM) have been used in this task, both suffer from important limitations. Whereas PBMs have challenges associated to the prediction of operating gap and to the validity of several of its assumptions in different formulations in the literature, application of DEM has its own challenges, in particular when fed with distributions containing large amounts of fines. This work proposes a hybrid approach in which the coupling of DEM to particle replacement models and multibody dynamics is used to predict operating gap, throughput and power, as well as providing information along the rolls length that is used in PBM to predict the product fineness. The hybrid approach is then compared to both DEM and a PBM (Modified Torres and Casali), demonstrating similar results to the later when applied to simulating a pilot-scale machine operating under different conditions, but improved prediction when applied in scale-up to an industrial-scale HPGR.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mineral Processing and Grinding · Granular flow and fluidized beds · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials Engineering, Universidade Federal do Rio de Janeiro, Brazil
Vale S.A., Complexo de Tubarão, Brazil
Funding
National Council for Scientific and Technological Development · Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro · Coordenação de Aperfeicoamento de Pessoal de Nível Superior
References (51)
Show source-provided references
1. Austin L.G., Trubeljal M.P., von Seebach H.M., Capacity of high-pressure grinding rolls, Mining, Metallurgy & Exploration, 12 (1995) 65–73. DOI:10.1007/BF0340308010.1007/BF03403080 ↗
2. Austin L.G., Weller K.R., Lim I.L., Phenomenological modelling of the high pressure grinding rolls, in: XVIII International Mineral Processing Congress, Sydney, 1993, pp. 87–96.
3. Banini G., Evaluation of scale up effect on high pressure grinding roll (HPGR) implementation at PT Freeport Indonesia, in: SAG Conference, Vancouver, Canada, 2011.
4. Barrios G.K.P., Tavares L.M., A preliminary model of high pressure roll grinding using the discrete element method and multi-body dynamics coupling, International Journal of Mineral Processing, 156 (2016) 32–42. DOI:10.1016/j.minpro.2016.06.00910.1016/j.minpro.2016.06.009 ↗
5. Campos T.M., Bueno G., Tavares L.M., Modeling comminution of iron ore concentrates in industrial-scale HPGR, Powder Technology, 383 (2021a)244–255. DOI:10.1016/j.powtec.2020.12.07510.1016/j.powtec.2020.12.075 ↗
6. Campos T.M., Bueno G., Böttcher A., Kwade A., Mayerhofer F., Tavares L.M., Relationships between particle breakage characteristics and comminution response of fine iron ore concentrates, Minerals Engineering, 164 (2021b) 106818. DOI:10.1016/j.mineng.2021.10681810.1016/j.mineng.2021.106818 ↗
7. Campos T.M., Bueno G., Barrios G.K.P., Tavares L.M., Pressing iron ore concentrate in a pilot-scale HPGR. Part 2: modeling and simulation, Minerals Engineering, 140 (2019a) 105876. DOI:10.1016/j.mineng.2019.10587610.1016/j.mineng.2019.105876 ↗
8. Campos T.M., Bueno G., Barrios G.K.P., Tavares L.M., Pressing iron ore concentrate in a pilot-scale HPGR. Part 1: experimental results, Minerals Engineering, 140 (2019b) 105875. DOI:10.1016/j.mineng.2019.10587510.1016/j.mineng.2019.105875 ↗
9. Chelgani C.S., Nasiri H., Tohry A., Modeling of particle sizes for industrial HPGR products by a unique explainable AI tool—A “Conscious Lab” development, Advanced Powder Technology, 32 (2021) 4141–4148. DOI:10.1016/J.APT.2021.09.02010.1016/j.apt.2021.09.020 ↗
10. Cleary P.W., Large scale industrial DEM modelling, Engineering Computations, 21 (2004) 169–204. DOI:10.1108/0264440041051973010.1108/02644400410519730 ↗
11. Cleary P.W., Sinnott M.D., Axial pressure distribution, flow behaviour and breakage within a HPGR investigation using DEM, Minerals Engineering, 163 (2021) 106769. DOI:10.1016/j.mineng.2020.10676910.1016/j.mineng.2020.106769 ↗
12. Daniel M.J, Morrell S., HPGR model verification and scale-up, Minerals Engineering, 17 (2004) 1149–1161. DOI:10.1016/j.mineng.2004.05.01610.1016/j.mineng.2004.05.016 ↗
13. Davaanyam Z., Klein B., Nadolski S., Using piston press tests for determining optimal energy input for an HPGR operation, in: SAG Conference, Vancouver, Canada, 2015, pp. 1–20.
14. Dundar H., Benzer H., Aydogan N., Application of population balance model to HPGR crushing, Minerals Engineering, 50–51 (2013) 114–120. DOI:10.1016/j.mineng.2013.07.00510.1016/j.mineng.2013.07.005 ↗
15. Edwards W., Pérez-Prim J., Barrios G.K.P., Tavares L.M., Edward D., Santhanam P., A coupling interface for co-simulation of EDEM with multi-body dynamics, in: 6th International Conference on DEM, Colorado, 2013.
16. Esnault V.P., Zhou H., Heitzmann D., New population balance model for predicting particle size evolution in compression grinding, Minerals Engineering, 73 (2015) 7–15. DOI:10.1016/j.mineng.2014.12.03610.1016/j.mineng.2014.12.036 ↗
17. Faria P.M.C., Rajamani R.K., Tavares L.M., Optimization of solids concentration in iron ore ball milling through modeling and simulation, Minerals, 9 (2019) 366. DOI:10.3390/min906036610.3390/min9060366 ↗
18. Fuerstenau D.W., Shukla A., Kapur P.C., Energy consumption and product size distributions in choke-fed, high-compression roll mills, International Journal of Mineral Processing, 32 (1991) 59–79. DOI:10.1016/0301-7516(91)90019-F10.1016/0301-7516(91)90019-F ↗
19. Hawkins R.A., A Piston and die test to predict laboratory-scale HPGR performance, MPhil Thesis, University of Queensland, 2008. DOI:10.14264/15872110.14264/158721 ↗
20. Herbst J.A., Fuerstenau D.W., Scale-up procedure for continuous grinding mill design using population balance models, International Journal of Mineral Processing, 7 (1980) 1–31. DOI:10.1016/0301-7516(80)90034-410.1016/0301-7516(80)90034-4 ↗
21. Herbst J.A., Mular M.A., Pate W.T., Qiu1 X., Detailed modeling of an HPGR/HRC for prediction of plant scale unit performance, in: International Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Rolls Technology Conference, Vancouver, Canada, 2011, pp. 1–20.
22. Herman V., Knorr B., Whalen D., HRCTM: taking HPGR efficiency to the next level by reducing edge effect, in: International Mineral Processing Conference, Santiago de Chile, 2013, pp. 195–202.
23. Klymowsky I.B., Liu J., Towards the development of a work index for the roller press, Society for Mining, Metallurgy and Exploration, Inc., Littleton, CO (United States), 1997.
24. Lim I.L., Voigt W., Weller K.R., Product size distribution and energy expenditure in grinding minerals and ores in high pressure rolls, International Journal of Mineral Processing, 44–45 (1996) 539–559. DOI:10.1016/0301-7516(95)00064-X10.1016/0301-7516(95)00064-X ↗
25. Liu J., Schönert K., Modelling of interparticle breakage, International Journal of Mineral Processing, 44–45 (1996) 101–115. DOI:10.1016/0301-7516(95)00022-410.1016/0301-7516(95)00022-4 ↗
26. Lubjuhn U., Schönert K., Material flow in the acceleration zone and throughput of high pressure roller mills, in: XVIII International Mineral Processing Congress (IMPC), Sydney, 1993, pp. 161–168.
27. Mindlin R.D., Compliance of elastic bodies in contact, Journal of Applied Mechanics, 16 (1949) 259–268. DOI:10.1115/1.400997310.1115/1.4009973 ↗
28. Mindlin R.D., Deresiewicz H., Elastic spheres in contact under varying oblique forces, Journal of Applied Mechanics, 20 (1953) 327–344. DOI:10.1115/1.401070210.1115/1.4010702 ↗
29. Morley C., HPGR-FAQ, Journal of the Southern African Institute of Mining and Metallurgy, 110 (2010) 107–115. http://www.scielo.org.za/pdf/jsaimm/v110n3/03.pdf
30. Morrell S., An alternative energy–size relationship to that proposed by Bond for the design and optimisation of grinding circuits, International Journal of Mineral Processing, 74 (2004) 133–141. DOI:10.1016/j.minpro.2003.10.00210.1016/j.minpro.2003.10.002 ↗
31. Morrell S., Predicting the specific energy required for size reduction of relatively coarse feeds in conventional crushers and high pressure grinding rolls, Minerals Engineering, 23 (2010) 151–153. DOI:10.1016/j.mineng.2009.10.00310.1016/j.mineng.2009.10.003 ↗
32. Morrell S., Lim W., Shi F., Tondo L., Modelling of the HPGR crusher, in: Kawatra S.K. (Eds.), Comminution Practices, Society for Mining Metallurgy, 1997, pp.117–126, ISBN: 978-0873351492.
33. Morrell S., Helping to reduce mining industry carbon emissions: a step-by-step guide to sizing and selection of energy efficient high pressure grinding rolls circuits, Minerals Engineering, 179 (2022) 107431. DOI:10.1016/j.mineng.2022.10743110.1016/j.mineng.2022.107431 ↗
34. Nadolski S., Bamber A.S., Klein S., Drozdiak J., Investigation into laboratory scale tests for the sizing of high pressure grinding rolls, in: SAG Conference, Vancouver, Canada, 2011, pp. 1–18.
35. Nagata Y., Tsunazawa Y., Tsukada K., Yaguchi Y., Ebisu Y., Mitsuhashi K., Tokoro C., Effect of the roll stud diameter on the capacity of a high-pressure grinding roll using the discrete element method, Minerals Engineering, 154 (2020) 106412. DOI:10.1016/j.mineng.2020.10641210.1016/j.mineng.2020.106412 ↗
36. Pamparana G., Klein B., A methodology to predict the HPGR operational gap by using piston press tests, Minerals Engineering, 166 (2021) 106875. DOI:10.1016/j.mineng.2021.10687510.1016/j.mineng.2021.106875 ↗
37. Quist J., Evertsson M., Simulating pressure distribution in HPGR using the discrete element method, in: 8th International Comminution Symposium, 2012, pp. 1–14.
38. Rashidi S., Rajamani R.K., Fuerstenau D.W., A review of the modeling of high pressure grinding rolls, KONA Powder and Particle Journal, 34 (2017) 125–140. DOI:10.14356/kona.201701710.14356/kona.2017017 ↗
39. Reid K.J., A solution to the batch grinding equation, Chemical Engineering Science, 20 (1965) 953–963. DOI:10.1016/0009-2509(65)80093-810.1016/0009-2509(65)80093-8 ↗
40. Rodriguez V.A., Barrios G.K.P., Bueno G., Tavares L.M., Investigation of lateral confinement, roller aspect ratio and wear condition on HPGR performance using DEM-MBD-PRM simulations, Minerals, 11 (2021) 801. DOI:10.3390/min1108080110.3390/min11080801 ↗
41. Rodriguez V.A., Barrios G.K.P., Bueno G., Tavares L.M., Coupled DEM-MBD-PRM simulations of high-pressure grinding rolls. Part 1: calibration and validation in pilot-scale, Minerals Engineering, 177 (2022a) 107389. DOI:10.1016/j.mineng.2021.10738910.1016/j.mineng.2021.107389 ↗
42. Rodriguez V.A., Barrios G.K.P., Tavares L.M., Coupled DEM-MBD-PRM simulations of high-pressure grinding rolls. Part 2: investigation of roll skewing, Minerals Engineering, 178 (2022b) 107428. DOI:10.1016/j.mineng.2022.10742810.1016/j.mineng.2022.107428 ↗
43. Schönert K., A first survey of grinding with high-compression roller mills, International Journal of Mineral Processing, 22 (1988) 401–412. DOI:10.1016/0301-7516(88)90075-010.1016/0301-7516(88)90075-0 ↗
44. Tavares L.M., Rodriguez V.A., Souzani M., Padros C.B., Ooi J.Y., An effective sphere-based breakage model for simulation in DEM, Powder Technology, 392 (2021) 473–488. DOI:10.1016/j.powtec.2021.07.03110.1016/j.powtec.2021.07.031 ↗
45. Thivierge A., Bouchard J., Desbiens A., Unifying high-pressure grinding rolls models, Minerals Engineering, 178 (2022) 107427. DOI:10.1016/j.mineng.2022.10742710.1016/j.mineng.2022.107427 ↗
46. Tohry A., Yazdani S., Hadavandi E., Mahmudzadeh E., Chelgani S.C., Advanced modeling of HPGR power consumption based on operational parameters by BNN: a “Conscious-Lab” development, Powder Technology, 381 (2021) 280–284. DOI:10.1016/j.powtec.2020.12.01810.1016/j.powtec.2020.12.018 ↗
47. Torres M., Casali A., A novel approach for the modelling of high-pressure grinding rolls, Minerals Engineering, 22 (2009) 1137–1146. DOI:10.1016/j.mineng.2009.04.01110.1016/j.mineng.2009.04.011 ↗
48. Van der Ende R., Knapp H., Van der Meer F., Reducing edge effect and material bypass using spring-loaded cheek plates in HPGR grinding, in: SAG Conference 2019, pp. 1–9.
49. Van der Meer F.P., Roller press grinding of pellet feed. Experiences of KHD in the iron ore industry. In: Proceedings from the AusIMM Conference on Iron Ore Resources and Reserves Estimation, Perth WA Australia, 1997.
50. Van der Meer F.P., Leite I.A., Aspects of HPGR in iron ore pellet feed preparation, in: 6th Brazilian Ore Agglomeration Symposium, São Paulo, 2018, pp. 102–115. DOI:10.5151/2594-357X-3151610.5151/2594-357X-31516 ↗
51. Weerasekara N.S., Powell M.S., Cleary P.W., Tavares L.M., Evertsson M., Morrison R.D., Quist J., Carvalho R.M., The contribution of DEM to the science of comminution, Powder Technology, 248 (2013) 3–24. DOI:10.1016/j.powtec.2013.05.03210.1016/j.powtec.2013.05.032 ↗