journal article·2024-01-10Open access

A Review of Analytical Methods for Calculating Static Pressures in Bulk Solids Storage Structures

George Dyck, Adam Rogers, Jitendra Paliwal

KONA Powder and Particle Journal· Volume 41· Issue 0

Abstract

The Janssen equation is a widely used method for calculating pressures in bulk storage structures. This review explores the historical legacy of Janssen’s equation and its applications in both planar and three-dimensional structures. Our focus is on the limitations of the original formulation of Janssen, extensions made to avoid these deficiencies, and alternative models that have been developed. The motivation behind these modifications is to improve the representation of shear stress within a grain bin in both the horizontal and vertical directions. Modifications to Janssen’s basic assumptions include the vertical-to-horizontal stress ratio (k), the coefficient of friction between the wall and the stored bulk material (μ), internal angle of friction (ϕ), and bulk density (ρ). We also discuss recent developments in pressure theories, which have provided new insights into pressure fields in bulk storage bins. These modern approaches include the continuum elastic theory and microscopic theory. Finally, we discuss recent developments in pressure theories which provide new insights into the storage of bulk solids. Overall, this review provides a comprehensive overview of the Janssen equation and its historical development, limitations, and extensions, as well as recent advancements in pressure theory that offer a more accurate representation of pressure fields in bulk storage structures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Fluid Dynamics Simulations and Interactions · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biosystems Engineering, University of Manitoba, Canada

AGCO Corporation, Canada

References (100+)

Show source-provided references
1. ASABE, Tower Silos: Unit Weight of Silage and Silo Capacities, ASABE Standard, 1982 (2005) D252.1. accessed 01.11.2023.
2. Airy W., The pressure of grain, Minutes of Proceedings Institution of Civil Engineers, 131 (1898) 347–358. DOI:10.1680/imotp.1898.1921310.1680/imotp.1898.19213 ↗
3. Back R., Frictional effects on mass measurements in a column of glass beads, Granular Matter, 13 (2011) 723–729. DOI:10.1007/s10035-011-0285-010.1007/s10035-011-0285-0 ↗
4. Bertho Y., Giorgiutti-Dauphiné F., Hulin J.P., Dynamical Janssen effect on granular packing with moving walls, Physical Review Letters, 90 (2003) 144301. DOI:10.1103/PhysRevLett.90.14430110.1103/PhysRevLett.90.144301 ↗
5. Beverloo W.A., Leniger H.A., van de Velde J., The flow of granular solids through orifices, Chemical Engineering Science, 15 (1961) 260–269. DOI:10.1016/0009-2509(61)85030-610.1016/0009-2509(61)85030-6 ↗
6. Bhadra R., Casada M.E., Turner A.P., Montross M.D., Thompson S.A., McNeill S.G., Maghirang R.G., Boac J.M., Stored grain pack factor measurements for soybeans, grain sorghum, oats, barley, and wheat, Transactions of the ASABE, 61 (2018) 747–757. DOI:10.13031/trans.1264510.13031/trans.12645 ↗
7. Bhadra R., Turner A.P., Casada M.E., Montross M.D., Thompson S.A., Boac J.M., McNeill S.G., Maghirang R.G., Pack factor measurements for corn in grain storage bins, Transactions of the ASABE, 58 (2015) 879–890. DOI:10.13031/trans.58.1103310.13031/trans.58.11033 ↗
8. Bratberg I., Måløy K.J., Hansen A., Validity of the Janssen law in narrow granular columns, European Physical Journal E, 18 (2005) 245–252. DOI:10.1140/epje/e2005-00030-110.1140/epje/e2005-00030-1 ↗
9. Bräuer K., Pfitzner M., Krimer D.O., Mayer M.Y., Liu M., Granular elasticity: stress distributions in silos and under point loads, Physical Review E—Statistical, Nonlinear, and Soft Matter Physics, 74 (2006) 061311. DOI:10.1103/PhysRevE.74.06131110.1103/PhysRevE.74.061311 ↗
10. Buick J.M., Pankaj Ooi J.Y., Chavez-Sagarnaga J., Pearce A., Houghton G., Motion of granular particles on the wall of a model silo and the associated wall vibrations, Journal of Physics D: Applied Physics, 37 (2004) 2751–2760. DOI:10.1088/0022-3727/37/19/02210.1088/0022-3727/37/19/022 ↗
11. Chen J.F., Rotter J.M., Ooi J.Y., A review of numerical prediction methods for silo wall pressures, Advances in Structural Engineering, 2 (1999) 119–135. DOI:10.1177/13694332990020020510.1177/136943329900200205 ↗
12. Chen Y., Liang C., Wang X., Guo X., Chen X., Liu D., Static pressure distribution characteristics of powders stored in silos, Chemical Engineering Research and Design, 154 (2020) 1–10. DOI:10.1016/j.cherd.2019.10.05010.1016/j.cherd.2019.10.050 ↗
13. Cheng X., Zhang Q., Shi C., Yan X., Model for the prediction of grain density and pressure distribution in hopper-bottom silos, Biosystems Engineering, 163 (2017) 159–166. DOI:10.1016/j.biosystemseng.2017.09.00610.1016/j.biosystemseng.2017.09.006 ↗
14. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Géotechnique, 29 (1979) 47–65. DOI:10.1680/geot.1979.29.1.4710.1680/geot.1979.29.1.47 ↗
15. Di Felice R., Scapinello C., On the interaction between a fixed bed of solid material and the confining column wall: the Janssen approach, Granular Matter, 12 (2010) 49–55. DOI:10.1007/s10035-009-0157-z10.1007/s10035-009-0157-z ↗
16. Endo K., Reddy K.A., Katsuragi H., Obstacle-shape effect in a two-dimensional granular silo flow field, Physical Review Fluids, 2 (2017) 1–16. DOI:10.1103/PhysRevFluids.2.09430210.1103/PhysRevFluids.2.094302 ↗
17. European Standard E.N., BS EN 1991-4: 2006, Eurocode 1—Actions on structures—Part 4: Silos and tanks, 2006, ISBN: 9780580839153.
18. González-Montellano C., Ayuga F., Ooi J.Y., Discrete element modelling of grain flow in a planar silo: influence of simulation parameters, Granular Matter, 13 (2011) 149–158. DOI:10.1007/s10035-010-0204-910.1007/s10035-010-0204-9 ↗
19. González-Montellano C., Fuentes J.M., Ayuga-Téllez E., Ayuga F., Determination of the mechanical properties of maize grains and olives required for use in DEM simulations, Journal of Food Engineering, 111 (2012) 553–562. DOI:10.1016/j.jfoodeng.2012.03.01710.1016/j.jfoodeng.2012.03.017 ↗
20. Granik V.T., Ferrari M., Microstructural mechanics of granular media, Mechanics of Materials, 15 (1993) 301–322. DOI:10.1016/0167-6636(93)90005-C10.1016/0167-6636(93)90005-C ↗
21. Hagen G.H.L., Las uber den druck und die bewegung des trocken sandes, Bericht über die zur Bekanntmachung geeigneten Verhandlungen der Königlich Preussischen Akademie der Wissenschaften zu Berlin, (1852), pp. 35–42.
22. Haque E., Estimating bulk density of compacted grains in storage bins and modifications of Janssen’s load equations as affected by bulk density, Food Science & Nutrition, 1 (2013) 150–156. DOI:10.1002/fsn3.2310.1002/fsn3.23 ↗
23. Horabik J., Parafiniuk P., Molenda M., Experiments and discrete element method simulations of distribution of static load of grain bedding at bottom of shallow model silo, Biosystems Engineering, 149 (2016) 60–71. DOI:10.1016/j.biosystemseng.2016.06.01210.1016/j.biosystemseng.2016.06.012 ↗
24. Horabik J., Rusinek R., Pressure ratio of cereal grains determined in a uniaxial compression test, International agrophysics, (2002) 23–28. accessed 01.11.2023.
25. Jaky J., Pressure in silos, Proceedings of the 2nd International Conference on Soil Mechanics and Foundation Engineering (Rotterdam), (1948) 103–107.
26. Jamieson J.A., Grain pressures in deep bins, Transactions of the Canadian Society for Civil Engineering, 17 (1903) 554–607.
27. Janssen H.A., On the pressure of gain in silo, Proceedings of the Institution of Civil Engineers, 124 (1896) 553–555.
28. Jenike A.W., Gravity Flow of Bulk Solids, Bulletin 108 of the Utah Engineering Experiment Station, University of Utah, (1961).
29. Jenike A.W., Johanson J.R., Carson J.W., Bin loads—part 2. concepts, Journal of Manufacturing Science and Engineering, 95 (1973a) 1–5. DOI:10.1115/1.343810010.1115/1.3438100 ↗
30. Jenike A.W., Johanson J.R., Carson J.W., Bin loads—part 3: mass-flow bins, Journal of Manufacturing Science and Engineering, 95 (1973b) 6–12. DOI:10.1115/1.343816310.1115/1.3438163 ↗
31. Jenike A.W., Johanson J.R., Carson J.W., Bin loads—part 4: funnel-flow bins, Journal of Manufacturing Science and Engineering, 95 (1973c) 13–16. DOI:10.1115/1.343808910.1115/1.3438089 ↗
32. Jenike A.W., Johanson J.R., On the theory of bin loads, The Journal of Manufacturing Science and Engineering, 91 (1969) 339–344. DOI:10.1115/1.359157010.1115/1.3591570 ↗
33. Jiang Y., Liu M., Granular elasticity without the coulomb condition, Physical Review Letters, 91 (2003) 1–4. DOI:10.1103/PhysRev-Lett.91.14430110.1103/PhysRevLett.91.144301 ↗
34. Jiang Y., Liu M., A brief review of “granular elasticity”, The European Physical Journal E, 22 (2007a) 255–260. DOI:10.1140/epje/e2007-00009-x10.1140/epje/e2007-00009-x ↗
35. Jiang Y., Liu M., From elasticity to hypoplasticity: dynamics of granular solids, Physical Review Letters, 99 (2007b) 5–8. DOI:10.1103/PhysRevLett.99.10550110.1103/PhysRevLett.99.105501 ↗
36. Jiang Y., Liu M., Incremental stress-strain relation from granular elasticity: comparison to experiments, Physical Review E, 77 (2008) 1–9. DOI:10.1103/PhysRevE.77.02130610.1103/PhysRevE.77.021306 ↗
37. Ketchum M.S., The Design of Walls, Bins and Grain Elevators, 2nd edition, The Engineering News Publishing Company, New York, 1911, ISBN: 9781236382566.
38. Koenen M., Berechnung des seiten-und bodendrucks in Silozellen, Central-blatt der Bauverwaltung, 16 (1896) 446–449.
39. Krimer D.O., Pfitzner M., Bräuer K., Jiang Y., Liu M., Granular elasticity: general considerations and the stress dip in sand piles, Physical Review E—Statistical, Nonlinear, and Soft Matter Physics, 74 (2006) 1–10. DOI:10.1103/PhysRevE.74.06131010.1103/PhysRevE.74.061310 ↗
40. Körzendörfer A., Vibrations and ultrasound in food processing–sources of vibrations, adverse effects, and beneficial applications–an overview, Journal of Food Engineering, 324 (2022) 110875. DOI:10.1016/j.jfoodeng.2021.11087510.1016/j.jfoodeng.2021.110875 ↗
41. Labuz J.F., Zang A., Mohr–Coulomb failure criterion, Rock Mechanics and Rock Engineering, 45 (2012) 975–979. DOI:10.1007/s00603-012-0281-710.1007/s00603-012-0281-7 ↗
42. Landry J.W., Grest G.S., Plimpton S.J., Discrete element simulations of stress distributions in silos: crossover from two to three dimensions, Powder Technology, 139 (2004) 233–239. DOI:10.1016/j.powtec.2003.10.01610.1016/j.powtec.2003.10.016 ↗
43. Lapko A., Gnatowski M., Prusiel J.A., Analysis of some effects caused by interaction between bulk solid and r.c. silo wall structure, Powder Technology, 133 (2003) 44–53. DOI:10.1016/S0032-5910(03)00095-010.1016/S0032-5910(03)00095-0 ↗
44. Liu Y.Y., Zhang D.L., Dai B.B., Su J., Li Y., Yeung A.T., Experimental study on vertical stress distribution underneath granular silos, Powder Technology, 381 (2021) 601–610. DOI:10.1016/j.powtec.2020.11.06610.1016/j.powtec.2020.11.066 ↗
45. Mahajan S., Tennenbaum M., Pathak S.N., Baxter D., Fan X., Padilla P., Anderson C., Fernandez-Nieves A., Pica Ciamarra M., Reverse Janssen effect in narrow granular columns, Physical Review Letters, 124 (2020) 128002. DOI:10.1103/PhysRevLett.124.12800210.1103/PhysRevLett.124.128002 ↗
46. Matchett A.J., Stresses in a bulk solid in a cylindrical silo, including an analysis of ratholes and an interpretation of rathole stability criteria, Chemical Engineering Science, 61 (2006) 2035–2047. DOI:10.1016/j.ces.2005.10.04910.1016/j.ces.2005.10.049 ↗
47. Matchett A.J., Exponential stress in silos—an example from literature, Chemical Engineering Research and Design, 161 (2020) 125–129. DOI:10.1016/j.cherd.2020.06.03010.1016/j.cherd.2020.06.030 ↗
48. Matchett A.J., Close R., A principal stress cap model for stresses in eccentric, circular hoppers, Powder Technology, 391 (2021) 403– 424. DOI:10.1016/j.powtec.2021.06.03210.1016/j.powtec.2021.06.032 ↗
49. McInnes D.B., Stresses developed by granular material in cylindrical bins, Master of Engineering thesis, McGill University, Canada (Apr. 1968). accessed 01.11.2023.
50. Millet O., Rahmoun J., De Saxcé G., Analytic calculation of the stresses in an ensiled granular medium, Comptes Rendus Mécanique, 334 (2006) 137–142. DOI:10.1016/j.crme.2005.11.00510.1016/j.crme.2005.11.005 ↗
51. Nedderman R.M., Statics and Kinematics of Granular Materials, Cambridge University Press, (1992). ISBN: 9780521404358.10.1017/CBO9780511600043 ↗
52. Negi S.C., Ogilvie J.R., Silage pressure in tower silos. part 1. theoretical and design considerations, Canadian Agricultural Engineering, 19 (1977) 92–97.
53. Ooi J.Y., Rotter J.M., Wall pressures in squat steel silos from simple finite element analysis, Computers and Structures, 37 (1990) 361–374. DOI:10.1016/0045-7949(90)90026-X10.1016/0045-7949(90)90026-X ↗
54. Ovarlez G., Clément E., Elastic medium confined in a column versus the Janssen experiment, European Physical Journal E, 16 (2005) 421– 438. DOI:10.1140/epje/i2004-10098-810.1140/epje/i2004-10098-8 ↗
55. Pascot A., Gaudel N., Antonyuk S., Bianchin J., Kiesgen De Richter S., Influence of mechanical vibrations on quasi-2D silo discharge of spherical particles, Chemical Engineering Science, 224 (2020) 115749. DOI:10.1016/j.ces.2020.11574910.1016/j.ces.2020.115749 ↗
56. Petingco M.C., Casada M.E., Maghirang R.G., Thompson S.A., Turner A.P., McNeill S.G., Montross M., Discrete element method simulation of wheat bulk density as affected by grain drop height and kernel size distribution, Journal of the ASABE, 65 (2022) 555–566. DOI:10.13031/ja.1481110.13031/ja.14811 ↗
57. Pleissner J., Versuche zur ermittlung der boden und seitenwanddrucke in getreidesilos, Zeitschrift des Vereines deutscher Ingenieure, 50 (1906) 976–986.
58. Pont S.C.d., Gondret P., Perrin B., Rabaud M., Wall effects on granular heap stability, Europhysics Letters, 61 (2003) 492–498. DOI:10.1209/epl/i2003-00156-510.1209/epl/i2003-00156-5 ↗
59. Prante N.I.. Messungen des getreidedruckes gegen silowandungen, Zeitschrift des Verein Deutscher Ingenieure (Germany), 40 (1896) 1122–1125.
60. Qadir A., Guo H., Liang X., Shi Q., Sun G., Effect of the ratios of diameter of silo to bead on the pressure screening in granular columns, European Physical Journal E, 31 (2010) 311–314. DOI:10.1140/epje/i2010-10581-710.1140/epje/i2010-10581-7 ↗
61. Rahmoun J., Millet O., De Saxcé G., A continuous media approach to modeling the stress saturation effect in granular silos, Journal of Statistical Mechanics: Theory and Experiment, 2008 (2008) P06011. DOI:10.1088/1742-5468/2008/06/P0601110.1088/1742-5468/2008/06/P06011 ↗
62. Ramírez A., Nielsen J., Ayuga F., Pressure measurements in steel silos with eccentric hoppers, Powder Technology, 201 (2010) 7–20. DOI:10.1016/j.powtec.2010.02.02710.1016/j.powtec.2010.02.027 ↗
63. Ramírez-Gómez Á., The discrete element method in silo/bin research. Recent advances and future trends, Particulate Science and Technology, 38 (2020) 210–227. DOI:10.1080/02726351.2018.153609310.1080/02726351.2018.1536093 ↗
64. Reimbert M., Reimbert A., Silos: Theory and Practice: Vertical Silos, Horizontal Silos, Trans Tech Publications (1976), ISBN: 9782852063655.
65. Roberts A.W., 100 years of Janssen, 5th International Conference on Bulk Materials Storage, Handling and Transportation: Proceedings, (1995) 1–19.
66. Roberts A.W., Particle technology—reflections and horizons, Chemical Engineering Research and Design, 76 (1998) 775–796. DOI:10.1205/02638769852552210.1205/026387698525522 ↗
67. Roberts I., Determination of the vertical and lateral pressures of granular substances, The Royal Society Publishing, 36 (1883) 225–240. DOI:10.1098/rspl.1883.010610.1098/rspl.1883.0106 ↗
68. Rusinek R., Experimental method for determination of the pressure distribution in granular solids, Research in Agricultural Engineering, 49 (2003) 61–64. DOI:10.17221/4954-rae10.17221/4954-RAE ↗
69. Savage S.B., Some considerations of flow on cohesionless granular solids, Ph.D. thesis, McGill University, 1967. accessed 01.11.2023.
70. Schillinger D., Malla R.B., Analytical elastic solution based on Fourier series for a laterally confined granular column, Journal of Engineering Mechanics, 134 (2008) 937–951. DOI:10.1061/(asce)0733-9399(2008)134:11(937)10.1061/(ASCE)0733-9399(2008)134:11(937) ↗
71. Silvestri S., Gasparini G., Trombetti T., Foti D., On the evaluation of the horizontal forces produced by grain-like material inside silos during earthquakes, Bulletin of Earthquake Engineering, 10 (2012) 1535–1560. DOI:10.1007/s10518-012-9370-y10.1007/s10518-012-9370-y ↗
72. Sperl M., Experiments on corn pressure in silo cells—Translation and comment of Janssen’s paper from 1895, Granular Matter, 8 (2006) 59–65. DOI:10.1007/s10035-005-0224-z10.1007/s10035-005-0224-z ↗
73. Sun Q., Jin F., Wang G., Song S., Zhang G., On granular elasticity, Scientific Reports, 5 (2015) 9652. DOI:10.1038/srep0965210.1038/srep09652 ↗
74. Sun S., Zhao J., Zhang C., Calculation of silo wall pressure considering the intermediate stress effect, Advances in Civil Engineering, 2018 (2018) 3673515. DOI:10.1155/2018/367351510.1155/2018/3673515 ↗
75. Takami A., Mathematical analysis of pressure distribution in powder in equilibrium in a conical vessel, Power Technology, 14 (1975) 1–6. DOI:10.1016/0032-5910(76)80001-010.1016/0032-5910(76)80001-0 ↗
76. Tang J., Lu H., Guo X., Liu H., Static wall pressure distribution characteristics in horizontal silos, Powder Technology, 393 (2021) 342–348. DOI:10.1016/j.powtec.2021.07.08410.1016/j.powtec.2021.07.084 ↗
77. Thompson S.A., Schwab C.V., Ross I.J., Calibration of a model for packing whole grains, Applied Engineering in Agriculture, 7 (1991) 450–456. DOI:10.13031/2013.2624410.13031/2013.26244 ↗
78. Tighe B.P., Sperl M., Pressure and motion of dry sand: translation of Hagen’s paper from 1852, Granular Matter, 9 (2007) 141–144. DOI:10.1007/s10035-006-0027-x10.1007/s10035-006-0027-x ↗
79. Toltz M., Discussion on grain pressures in deep bins, Transactions of the Canadian Society for Civil Engineering, 17 (1903) 641.
80. Turner A.P., Montross M.D., McNeill S.G., Sama M.P., Casada M.E., Boac J.M., Bhadra R., Maghirang R.G., Thompson S.A., Modeling the compressibility behavior of hard red wheat varieties, Transactions of the ASABE, 59 (2016) 1029–1038. DOI:10.13031/trans.59.1143210.13031/trans.59.11432 ↗
81. Umbanhowar P., Goldman D.I., Granular impact and the critical packing state, Physical Review E, 82 (2010) 010301. DOI:10.1103/Phys-RevE.82.01030110.1103/PhysRevE.82.010301 ↗
82. Vanel L., Claudin P., Bouchaud J.P., Cates M.E., Clément E., Wittmer J.P., Stresses in silos: comparison between theoretical models and new experiments, Physical Review Letters, 84 (2000) 1439–1442. DOI:10.1103/PhysRevLett.84.143910.1103/PhysRevLett.84.1439 ↗
83. Vanel L., Clément E., Pressure screening and fluctuations at the bottom of a granular column, European Physical Journal B, 11 (1999) 525–533. DOI:10.1007/s10051005096510.1007/s100510050965 ↗
84. Vidal P., Gallego E., Guaita M., Ayuga F., Simulation of the filling pressures of cylindrical steel silos with concentric and eccentric hoppers using 3-dimensional finite element models, Transactions of the ASABE, 49 (2006) 1881–1895. DOI:10.13031/2013.2229010.13031/2013.22290 ↗
85. Vidal P., Gallego E., Guaita M., Ayuga F., Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper, Journal of Constructional Steel Research, 64 (2008) 480–492. DOI:10.1016/j.jcsr.2007.08.00510.1016/j.jcsr.2007.08.005 ↗
86. Volfson D., Tsimring L.S., Aranson I.S., Partially fluidized shear granular flows: continuum theory and molecular dynamics simulations, Physical Review E, 68 (2003) 021301. DOI:10.1103/Phys-RevE.68.02130110.1103/PhysRevE.68.021301 ↗
87. Walker D.M., An approximate theory for pressures and arching in hoppers, Chemical Engineering Science, 21 (1966) 975–997. DOI:10.1016/0009-2509(66)85095-910.1016/0009-2509(66)85095-9 ↗
88. Walters J.K., A theoretical analysis of stresses in silos with vertical walls, Chemical Engineering Science, 28 (1973) 779–789. DOI:10.1016/0009-2509(77)80012-210.1016/0009-2509(77)80012-2 ↗
89. Wang S., Yan Y., Ji S., Transition of granular flow patterns in a conical hopper based on superquadric DEM simulations, Granular Matter, 22 (2020) 79. DOI:10.1007/s10035-020-01051-910.1007/s10035-020-01051-9 ↗
90. Weisbach J., The Mechanics of Machinery and Engineering—Applied Mechanics, Philadelphia: Lea and Blanchard, Vol. 2 (1849). accessed 01.11.2023.
91. Windows-Yule C.R.K., Mühlbauer S., Cisneros L.A.T., Nair P., Marzulli V., Pöschel T., Janssen effect in dynamic particulate systems, Physical Review E, 100 (2019) 022902. DOI:10.1103/Phys-RevE.100.02290210.1103/PhysRevE.100.022902 ↗
92. Wittmer J.P., Cates M.E., Claudin P., Stress propagation and arching in static sandpiles, Journal de Physique I, 7 (1997) 39–80. DOI:10.1051/jp1:199712610.1051/jp1:1997126 ↗
93. Wittmer J.P., Claudin P., Cates M.E., Bouchaud J.P., An explanation for the central stress minimum in sand piles, Nature, 382 (1996) 336–338. DOI:10.1038/382336a010.1038/382336a0 ↗
94. Wiącek J., Molenda M., Effect of particle size distribution on micro-and macromechanical response of granular packings under compression, International Journal of Solids and Structures, 51 (2014) 4189–4195. DOI:10.1016/j.ijsolstr.2014.06.02910.1016/j.ijsolstr.2014.06.029 ↗
95. Wojcik M., Enstad G.G., Jecmenica M., Numerical calculations of wall pressures and stresses in steel cylindrical silos with concentric and eccentric hoppers, Particulate Science and Technology, 21 (2003) 247–258. DOI:10.1080/0272635030748610.1080/02726350307486 ↗
96. Xu S., Predictions of loads in grain storage bins using microstructural mechanics and endochronic theories, Ph.D. thesis, University of Manitoba, 1996. accessed01.11.2023.
97. Xu S., Zhang Q., Britton M.G., A microscopic theory for predicting loads in storage bins for granular materials, Journal of Agricultural and Engineering Research, 65 (1996) 253–259. DOI:10.1006/jaer.1996.009810.1006/jaer.1996.0098 ↗
98. Xu Y., Kafui K.D., Thornton C., Lian G., Effects of material properties on granular flow in a silo using dem simulation, Particulate Science and Technology, 20 (2002) 109–124. DOI:10.1080/0272635021533810.1080/02726350215338 ↗
99. Xu Z., Liang P., Modified lateral pressure formula of shallow and circular silo considering the elasticities of silo wall and storage materials, Scientific Reports, (2022) 1–10. DOI:10.1038/s41598-022-11305-610.1038/s41598-022-11305-6 ↗
100. Zhang Q., Britton M.G., A micromechanics model for predicting dynamic loads during discharge in bulk solids storage structures, Canadian Biosystems Engineering, 45 (2003) 5.21–5.27.