journal article·2010Open access

Powder Processing Issues for High Quality Advanced Ceramics

Makio Naito, Masataro Okumiya, Hiroya Abe, Akira Kondo, C.C. Huang

KONA Powder and Particle Journal· Volume 28· Issue 0

Abstract

In this paper, the effect of powder processing conditions on the fracture strength of advanced ceramics is discussed. Manufacturing processes of silicon nitride ceramics and alumina ceramics are utilized to explain the relationship between powder processing conditions and major fracture origin in the ceramics. The preparation conditions of powder slurry are found affecting the structure and strength of powder granules, which can influence the properties of green compact and thus the quality of sintered ceramics. These phenomena can be investigated by using new characterization tools such as the liquid immersion method and the observation technique using thinned ceramics specimen under the transmission mode. Also, very small amount of coarse particles contained in the powder slurry is found starting the fracture in ceramics by using wet sieve analysis and the observation technique with thinned ceramic specimen. As a result, it is found that the major ceramics fracture is originated from the large pores and coarse particles in powder granules, green compact and sintered ceramics. They can be unintentionally introduced in the manufacturing steps of ceramics, such as powder slurry preparation, spray drying, and forming process of green compact. By making use of these characterization tools, effective processing conditions to eliminate the large pores and coarse particles can be identified for producing high quality advanced ceramics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Synthesis and properties of polymers · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Joining and Welding Research Institute, Osaka University

Hosokawa Micron Powder Systems

References (31)

Show source-provided references
1. 1) Naito, M. and Abe, H. (2004): The Micromeritics, Funsai, No.48, pp.56–62.
2. 2) Abe, H., Hotta, T., Naito, M., Shinohara, N. and Uematsu, K. (2002): Direct Observation of Detrimental Defects in Ceramics, Am. Ceram. Soc. Bull., Vol.81, No.1, pp.31–34.
3. 3) Abe, H., Naito, M., Hotta, T., Shinohara, N. and Uematsu, K. (2003): Flaw Size Distribution in High-Quality Alumina, J. Am. Ceram. Soc., Vol.86, pp.1019–1021.10.1111/j.1151-2916.2003.tb03411.x ↗
4. 4) Naito, M., Hotta, T., Abe, H., Shinohara, N., Okumiya, M. and Uematsu, K. (2000): Optical Characterization of Strength-Limiting Flaws in Silicon Nitride Ceramics Prepared with Different Slurry Flocculation Conditions, British Ceramic Proceedings 61, pp.119–132, The Institute of Materials.
5. 5) Uematsu, K., Kim, J.-Y., Miyashita, M., Uchida, N. and Saito, K. (1990): Direct observation of internal structure in spray-dried alumina granules, J. Am. Ceram. Soc., Vol.73, pp.2555–2557.10.1111/j.1151-2916.1990.tb07635.x ↗
6. 6) Abe, H., Naito, M., Hotta, T., Kamiya, H. and Uematsu, K. (2003): Pore Defects Related to Slurry Character and their Relevance to Strength Distribution in Alumina Cermics, Powder Technology, Vol.134, pp.58–64.10.1016/S0032-5910(03)00127-X ↗
7. 7) Shinohara, N., Okumiya, M., Hotta, T., Nakahira, K., Naito, M. and Uematsu, K. (1999): Formation Mechanisms of Processing Defects and their Relevance to the Strength in Alumina Ceramics made by Powder Compaction Process, J. Mater. Sci., Vol.34, pp.4271–4277.10.1023/A:1004611105281 ↗
8. 8) Hotta, T., Nakahira, K., Naito, M., Shinohara, N., Okumiya, M. and Uematsu, K. (1999): Origin of Strength Change in Ceramics Associated with the Alteration of Spray Dryer, J. Material Research, Vol.14, No.7, pp.2974–2979.10.1557/JMR.1999.0398 ↗
9. 9) Abe, H., Hotta, T., Kuroyama, T., Yasutomi, Y., Naito, M., Kamiya, H. and Uematsu, K. (2001): Variation of Microstructure and Fracture Strength of Alumina Ceramics Made From Different Slurry Preparing Condition, Ceramic Processing Science VI, Ceramic Transactions, Vol.112, pp.809–814, published by Am. Ceram. Soc.
10. 10) Hiramatsu, Y., Oka, Y. and Kiyama, H. (1965): Rapid Determination of Tensile Strength of Rocks with Irregular Test Pieces, Nihon Kogyokai-shi, Vol.81, 1024.10.2473/shigentosozai1953.81.932_1024 ↗
11. 11) Naito, M., Nakahira, K., Hotta, T., Ito, A., Yokoyama, T. and Kamiya, H. (1998): Microscopic Analysis on the Consolidation Process of Granule Beds, Powder Technology, Vol.95, pp.214–219.10.1016/S0032-5910(97)03340-8 ↗
12. 12) Naito, M., Fukuda, Y., Yoshikawa, N., Kamiya, H. and Tsubaki, J. (1997): Optimization of Suspension Characteristics for Shaping Processes, J. European Ceram. Soc., Vol.17, pp.251–257.10.1016/S0955-2219(96)00144-6 ↗
13. 13) Hotta, T., Abe, H., Naito, M., Takahashi, M., Uematsu, K. and Kato, Z. (2005): Effect of Coarse Particles on the Strength of Alumina Made by Slip Casting, Powder Technology, Vol.149, pp.106–111.10.1016/j.powtec.2004.11.004 ↗
14. 14) Uematsu, K., Uchida, N., Kato, Z., Tanaka, S., Hotta, T. and Naito, M. (2001): Infrared Microscopy for Examination of Structure in Spray-Dried Granules and Compacts, J. Am. Ceram. Soc., Vol.84, pp.254–25610.1111/j.1151-2916.2001.tb00646.x ↗
15. 15) Naito, M., Hotta, T., Hayakawa, O., Shinohara, N. and Uematsu, K. (1998): Ball Milling Conditions of a Very Small Amount of Large Particles in Silicon Nitride Powder, J. Ceram. Soc., Japan, Vol.106, No.8, pp.811–814.10.2109/jcersj.106.811 ↗
16. 16) Hayakawa, O., Nakahira, K., Naito, M. and Tsubaki, J. (1998): Experimental Analysis on Sample Preparation Conditions for Particle Size Measurement, Powder Technology, Vol.100, pp.61–68.10.1016/S0032-5910(98)00053-9 ↗
17. 17) Naito, M., Hayakawa, O., Nakahira, K., Mori, H. and Tsubaki, J. (1998): Effect of Particle Shape on the Particle Size Distribution Measured with the Commercial Equipment, Powder Technology, Vol.100, pp.52–60.10.1016/S0032-5910(98)00052-7 ↗
18. 18) Cho, Y-I., Okumiya, M., Naito, M., Rabe, T., Waesche, R., Morrell, R., Ewsuk, K.G., Hackley, V., Freiman, S. and Uematsu, K. (2002): Characterization of Coarse Particles Contained in Fine Powders at Very Low Concentrations, Ceramic Transactions, Vol.133, pp.71–76, published by Am. Ceram. Soc.10.1002/9781118371480.ch10 ↗
19. 19) Nakahira, K., Hotta, T., Naito, M., Shinohara, N., Cho, Y-I., Katori, S., Emoto, H., Yamada, T., Takahashi, T., Okumiya, M., Kumagai, C. and Uematsu, K. (2003): Characterization of Coarse Particles in Alumina Powders by Wet Sieving Method, J. European Ceram. Soc., Vol.23, pp.1661–1666.10.1016/S0955-2219(02)00361-8 ↗
20. 20) Uematsu, K., Zhang, Y., Uchida, N., Hotta, T., Naito, M., Shinohara, N. and Okumiya, M. (1999): Structural Flaw Evaluation in Green Compacts and Ceramics by an Optical Method - For Understanding the Origin of Strength Variation in Ceramics -, Key Engineering Materials, Vols.161–163, pp.145–15010.4028/www.scientific.net/KEM.161-163.145 ↗
21. 21) Shinohara, N., Okumiya, M., Hotta, T., Nakahira, K., Naito, M. and Uematsu, K. (1999): Effect of Seasons on Density, Strength of Alumina, Am. Ceram. Soc. Bull., Vol.78, No.2, pp.81–84.
22. 22) Shinohara, N., Okumiya, M., Hotta, T., Nakahira, K., Naito, M. and Uematsu, K. (1999): Seasonal Variation of Microstructure and Sintered Strength of Dry-Pressed Alumina, J. Am. Ceram. Soc., Vol.82, No.12, pp.3441–3446.10.1111/j.1151-2916.1999.tb02262.x ↗
23. 23) Naito, M., Hotta, T., Abe, H., Shinohara, N., Cho, Y-I., Okumiya, M. and Uematsu, K. (2001): Relevance of the Fracture Strength to Process-Related Defects in Alumina Ceramics, Materials Transactions, The Japan Institute of Metals, Vol.42, pp114–119.10.2320/matertrans.42.114 ↗
24. 24) Hotta, T., Nakahira, K., Naito, M., Shinohara, N., Okumiya, M. and Uematsu, K. (2001): Origin of the Strength Change of Silicon Nitride Ceramics with the Alteration of Spray Drying Conditions, J. European Ceram. Soc., Vol.21, pp.603–610.10.1016/S0955-2219(00)00243-0 ↗
25. 25) Shinohara, N., Katori, S., Okumiya, M., Hotta, T., Nakahira, K., Naito, M., Cho, Y-I. and Uematsu, K. (2002): Effect of Heat Treatment of Alumina Granules on the Compaction Behavior and Properties of Green and Sintered Bodies, J. European Ceram. Soc., Vol.22, pp.2841–2848.10.1016/S0955-2219(02)00059-6 ↗
26. 26) Shinohara, N., Okumiya, M., Hotta, T., Nakahira, K., Naito, M. and Uematsu, K. (2000): Variation of the Microstructure and Fracture Strength of Cold Isostatically Pressed Alumina Ceramics with the Alteration of Dewaxing Procedures, J. European Ceram. Soc., Vol.20, pp.843–849.10.1016/S0955-2219(99)00237-X ↗
27. 27) Hotta, T., Abe, H., Fukui, T., Naito, M., Shinohara, N. and Uematsu, K. (2003): Effect of Dewaxing Procedures of Cold Isostatically Pressed Silicon Nitride Ceramics on its Microstructure and Fracture Strength, Advanced Powder Technology, Vol.14, pp.505–517.10.1163/156855203322448309 ↗
28. 28) Abe, H., Hotta, T., Naito, M., Shinohara, N., Okumiya, M., Kamiya, H. and Uematsu, K. (2001): Origin of Strength Variation of Silicon Nitride Ceramics with CIP Condition in a Powder Compaction Process, Powder Technology, Vol.119, pp.194–200.10.1016/S0032-5910(00)00421-6 ↗
29. 29) Naito, M., Abe, H., Hotta, T., Shinohara, N. and Uematsu, K. (2002): Fracture Strength Variability of Silicon Nitride Ceramics Made by Powder Compaction, Ceramic Transactions, Vol.133, pp.151–157, published by Am. Ceram. Soc.10.1002/9781118371480.ch20 ↗
30. 30) Abe, H., Sato, K., Naito, M., Nogi, K., Hotta, T., Tatami, J. and Komeya, K. (2005): Effects of granule compaction procedures on defect structure, fracture strength and thermal conductivity of AlN ceramics, Powder Technology, Vol.159, pp.155–160.10.1016/j.powtec.2005.08.004 ↗
31. 31) Shinohara, N., Ohsaka, S., Hotta, T., Abe, H., Naito, M. and Uematsu, K. (2005): Relevance of the internal structures to fracture strength of injection molded and sintered silicon nitride ceramics, Advanced Powder Technology, Vol.16, pp.425–434.10.1163/1568552054969915 ↗