Model-Based Optimization of Industrial Gas-Solid Reactors
Source abstract
Abstract
Heterogeneous non-catalytic gas-solid reactors are commonly used in the production of chemicals, metals and metal oxides, for example, rotary drum reactor for producing quick lime; blast furnace, a moving bed reactor for producing iron, etc. Industrial processes involve multicomponent mixtures of solids as most of the naturally occurring materials such as minerals are multicomponent in nature. Generally the raw materials are heterogeneous and their physical and chemical characteristics vary from one source to another. The solid particles are also usually moist, the moisture content varying from season to season. The physico-chemical phenomena that take place in these reactors include flow of gases through porous media, heat transfer between the gases, solids, equipment and the environment, evaporation and condensation of moisture, reactions between gases and solids and within a single phase, melting and solidification depending on the temperatures inside the reactor, etc. The flow of particles is also of great importance especially in rotary drum and moving bed reactors. General features of the mathematical models for non-catalytic reactors are described along with models for the phenomena mentioned above. Case studies from the iron and steel industry on model-based optimization of production of direct reduced iron in a rotary kiln and induration of wet iron ore pellets on a moving packed bed reactor are discussed here.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Iron and Steelmaking Processes · Mineral Processing and Grinding · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tata Research Development and Design Centre, Tata Consultancy Services Limited, India
References (100+)
Show source-provided references
1. Abouzeid A.M., Fuerstenau D.W., Flow of Non-homogeneous Particulates in Rotating Drums, KONA Powder and Particle Journal, 28 (2010) 155–166.10.14356/kona.2010014 ↗
2. Ahn H., Choi S., Cho B., Process simulation of iron ore sintering bed with flue gas recirculation, Ironmaking Steelmaking, 40 (2013) 120–127.10.1179/1743281212Y.0000000071 ↗
3. Barati M., Dynamic simulation of pellet induration process in straight-grate system, Intl. Jl. Mineral Process., 89 (2008) 30–39.10.1016/j.minpro.2008.09.008 ↗
4. Barr P.V., Brimacombe J.K., Watkinson A.P., A Heat-Transfer model for the Rotary Kiln: Part I. Pilot Kiln Trials, Met. Trans. B., 20B (1989a) 391–402.10.1007/BF02696991 ↗
5. Barr P.V., Brimacombe J.K., Watkinson A.P., A Heat-Transfer model for the Rotary Kiln: Part II. Development of cross-section model, Met. Trans. B., 20B (1989b) 403–419.10.1007/BF02696992 ↗
6. Bhatia S.K., Perlmutter D.D., A Random Pore Model for Fluid-Solid Reactions: I. Isothermal, Kinetic Control, AIChE J., 26 (1980) 379–386.10.1002/aic.690260308 ↗
7. Bhatia S.K., Perlmutter D.D., A Random Pore Model for Fluid-Solid Reactions: II. Diffusion and Transport Effects, AIChE J., 27 (1981) 247–254.10.1002/aic.690270211 ↗
8. Bierwagen G.P., Saunders T.E., Studies of the Effects of Particle Size Distribution on the Packing Efficiency of Particles, Powder Tech., 10 (1974) 111–119.10.1016/0032-5910(74)80036-7 ↗
9. Boateng A.A., Barr P.V., A thermal model for the rotary kiln including heat transfer within the bed, Int. J. Heat Mass Transfer, 39 (1996) 2131–2147.10.1016/0017-9310(95)00272-3 ↗
10. Cavalcante M.V.S., Miranda R.C.d., Andrade B., Venkoba Rao B., Majumder S., Runkana V., Advanced process control of an industrial iron ore pellet induration process, Paper No. 785, Proc. XXVI International Mineral Processing Congress, New Delhi, India, 2012.
11. CFXTM is a registered Trademark of ANSYS Inc., USA.
12. Chatterjee A., De A., Gupta S.S., Monograph on Sintermaking at Tata Steel, The Tata Iron and Steel Co. Ltd., Jamshedpur, India, 1993.
13. Clixby G., Young R.W., Mathematical model of the sintering process. In 10th process technology conference proceedings. Second international symposium on modeling in the iron and steel industry, Toronto, Vol. 10, 1992, pp. 391–402.
14. COMSOLTM is a registered Trademark of COMSOL Inc., USA.
15. Constantinides A., Applied Numerical Methods with Computers, McGraw Hill Book Co., New York, 1987.
16. Cross M., Blot P., Optimizing the operation of straight-grate iron-ore pellet induration systems using process models. Metall. Mater. Trans. B, 30B (1999) 803–813.10.1007/s11663-999-0042-5 ↗
17. Cross M., Patel M.K., Wade K.C., Analysis of the gas flow and heat distribution in iron ore pellet induration systems. In Rajamani R.K., Herbst J.A. (Eds.), Control 90—Mineral and Metallurgical Processing, Littleton, Colorado, USA, SMME Inc., 1990, pp. 99–107.
18. Cumming M.J., Thurlby J.A., Developments in Modeling and Simulation of Iron Ore Sintering, Ironmaking Steelmaking, 17 (1990) 245–254.
19. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Geotechnique, 29 (1979) 47–65.10.1680/geot.1979.29.1.47 ↗
20. D’Abreu J.C., Kohler H.M., Noldin Jr J.H., Mathematical model for descending self-reducing agglomerates in lumpy zone of Tecnored furnace, Ironmaking and Steelmaking, 35 (2008) 484–490.10.1179/174328108X358514 ↗
21. Davis R.A., Englund D.J., Model and Simulation of a Ported Kiln for Iron Oxide Pellet Induration, The Canadian Journal of Chem. Eng., 81 (2003) 86–93.10.1002/cjce.5450810110 ↗
22. de Castro J.A., Nath N., Franca A.B., Guilherme V.S., Sasaki Y., Analysis by multiphase multicomponent model of iron ore sintering based on alternative steelworks gaseous fuels, Ironmaking Steelmaking, 39 (2012) 605–613.10.1179/1743281212Y.0000000008 ↗
23. Deb K. Multi-Objective Optimization Using Evolutionary Algorithms, Wiley, Chichester, UK, 2001.
24. Dhanjal S.K., Barr P.V., Watkinson A.P., The Rotary Kiln: An Investigation of Bed Heat Transfer in the Transverse Plane, Metal. Mater. Trans. B, 35B (2004) 1059–1069.10.1007/s11663-004-0062-0 ↗
25. Donskoi E., Mcelwain D.L.S., Estimation and modeling of parameters for direct reduction in iron ore/coal composites: Part I. Physical parameters, Metallurgical and Materials Transactions B, 34B (2003) 93–102.10.1007/s11663-003-0059-0 ↗
26. DRIKSTM is a registered Trademark of Tata Consultancy Services Ltd., India.
27. Edgar T.F., Himmelblau D.M., Optimization of Chemical Processes, McGraw Hill Book Co., New York, 1989.
28. Feinman J., Mac Rae D.R. (Ed.), Direct Reduced Iron: Technology and Economics of Production and Use. The Iron and Steel Society, Warrendale, PA, USA, 1999.
29. Fernandes N.C.P., Castro J.A.A.M. Steady-state simulation of a continuous moving bed reactor in the pulp and paper industry, Chem. Eng. Sci., 55 (2000) 3729–3738.10.1016/S0009-2509(00)00063-4 ↗
30. Firth A.R., Manuel J.R., Thermal Implications of Phase Transformations during Induration of Iron Ore Pellets Produced from Hematite, ISIJ International, 45 (2005) 1561–1566.10.2355/isijinternational.45.1561 ↗
31. FluentTM is a registered Trademark of ANSYS Inc., USA.
32. Gan M., Gopinathan N., Jia X., Williams R.A. Predicting Packing Characteristics of Particles of Arbitrary Shapes, KONA Powder and Particle Journal, 22 (2004) 82–93.10.14356/kona.2004012 ↗
33. Ge Z., Song Z., Kano M., External Analysis-Based Regression Model for Robust Soft Sensing of Multimode Chemical Processes, AIChE Journal, 60 (2014) 136–147.10.1002/aic.14253 ↗
34. Gorog J.P., Brimacombe J.K., Adams T.N., Heat transfer from flames in a rotary kiln, Met. Trans. B, 12B (1981) 55–70.10.1007/BF02674758 ↗
35. gPROMSTM is a registered Trademark of Process Systems Enterprise Limited, London, UK.
36. Gupta S.S., Runkana V., Mathematical model of air flow during iron ore sintering process, Iron and Steelmaker, 27 (2000) 35–41.
37. Hartge E.U., Pogodda M., Reimers C., Schwier D., Gruhn G., Werther J., Flowsheet Simulation of Solids Processes, KONA Powder and Particle Journal, 24 (2006) 146–158.10.14356/kona.2006017 ↗
38. Henein H., Brimacombe J.K., Watkinson A.P., The modeling of transverse solids motion in rotary kilns, Metallurgical Transactions B, 14 (1983) 207–220.10.1007/BF02661017 ↗
39. Hinkley J., Waters A.G., Litster J.D., An Investigation of Pre-ignition Air Flow in Ferrous Sintering, Int. Jl. Miner. Process, 42 (1994) 37–52.10.1016/0301-7516(94)90019-1 ↗
40. Hobbs M.L., Radulovic P.T., Smoot L.D., Modeling Fixed-Bed Coal Gasifiers, AIChE Jl., 38 (1992) 681–702.10.1002/aic.690380506 ↗
41. Hogg R., Mixing and Segregation in Powders: Evaluation, Mechanisms and Processes, KONA Powder and Particle Journal, 27 (2009) 3–27.10.14356/kona.2009005 ↗
42. Homma S., Ogata S., Koga J., Matsumoto S., Gas–solid reaction model for a shrinking spherical particle with unreacted shrinking core, Chem. Eng. Sci., 60 (2005) 4971–4980.10.1016/j.ces.2005.03.057 ↗
43. Kajitani S., Hara S., Matsuda H., Gasification Rate Analysis of Coal Char with a Pressurized Drop Tube Furnace, Fuel, 81 (2002) 539–546.10.1016/S0016-2361(01)00149-1 ↗
44. Kaneko H., Funatsu K., Database Monitoring Index for Adaptive Soft Sensors and the Application to Industrial Process, AIChE Journal, 60 (2014) 160–169.10.1002/aic.14260 ↗
45. Kapur P.C., Runkana V., Balling and granulation kinetics revisited, Int. J. of Mineral Process., 72 (2003) 417–427.10.1016/S0301-7516(03)00116-9 ↗
46. Khakhar D.V., Orpe A.V., Ottino J.M., Continuum Model of Mixing and Size Segregation in a Rotating Cylinder: Concentration-Flow Coupling and Streak Formation, Powder Technology, 116 (2001) 232–245.10.1016/S0032-5910(00)00390-9 ↗
47. Kiashemshaki A., Mostoufi N., Sotudeh-Gharebagh R., Two-phase Modeling of a Gas Phase Polyethylene Fluidized Bed Reactor, Chem. Eng. Sci., 61 (2006) 3997–4006.10.1016/j.ces.2006.01.042 ↗
48. Klose W., Wiest W., Experiments and Mathematical Modeling of Maize Pyrolysis in a Rotary Kiln, Fuel, 78 (1999) 65–72.10.1016/S0016-2361(98)00124-0 ↗
49. Kramers H., Croockewit P., The passage of granular solids through inclined rotary kilns, Chem. Eng. Sci., 1 (1952) 259–265.10.1016/0009-2509(52)87019-8 ↗
50. Kucukada K., Thibault J., Hodouin D., Paquet G., Caron S., Modelling of a pilot scale iron ore pellet induration furnace, Canadian Metall. Quart., 33 (1994) 1–12.10.1179/000844394795539389 ↗
51. Kunii D., Levenspiel O., Circulating fluidized-bed reactors, Chem. Eng. Sci., 52 (1997) 2471–2482.10.1016/S0009-2509(97)00066-3 ↗
52. Lee D.I., Packing of spheres and its effect on the viscosity of suspensions. J. Paint Technol., 42 (1970) 579.
53. Levenspiel O., Chemical Reaction Engineering, 2nd Ed., John Wiley & Sons, Inc., New York, USA, 1988.
54. Li J.Q., Wei F., Jin Y., Numerical simulation of pulverized coal combustion and NO formation, Chem. Eng. Sci., 58 (2003) 5161–5171.10.1016/j.ces.2003.08.012 ↗
55. Liu F., Bhatia S.K., Solution Techniques for Transport Problems involving Steep Concentration Gradients: Application to Noncatalytic Fluid Solid Reactions, Comp. Chem. Eng., 25 (2001) 1159–1168.10.1016/S0098-1354(01)00690-1 ↗
56. Liu X.Y., Specht E., Gonzalez O.G., Walzel P., Analytical solution for the rolling-mode granular motion in rotary kilns, Chem. Eng. Proc., 45 (2005) 515–521.10.1016/j.cep.2005.10.009 ↗
57. Liu P.Y., Yang R.Y., Yu A.B., DEM Study of the Transverse Mixing of Wet Particles in Rotating Drums, Chem. Eng. Sci., 86 (2013) 99–107.10.1016/j.ces.2012.06.015 ↗
58. Majumdar K.S., Ganesha K.V., Kulkarni S.B., Ranade V.V., Rotary Cement Kiln Simulator (RoCKS): Integrated modeling of pre-heater, calciner, kiln and clinker cooler, Chem. Eng. Sci., 62 (2007) 2590–2607.10.1016/j.ces.2007.01.063 ↗
59. Majumder S., Natekar P.V., Runkana V., Virtual Indurator: A Tool for Simulation of Induration of Wet Iron Ore Pellets on a Moving Grate, Comput. Chem. Eng., 33 (2009) 1141–1152.10.1016/j.compchemeng.2008.11.016 ↗
60. Majumder S., Desai V.J., Arunprasath J., Runkana V., Prasad A.S., Ravindranath M., Sharma P., Model-based On-line Optimization of Iron Ore Pellet Induration on a Moving Grate Furnace, Paper No. 5, Proc. XXVI International Mineral Processing Congress, New Delhi, India, 2012, pp. 03117–03136.
61. Marias F., A model of a rotary kiln incinerator including processes occurring within the solid and the gaseous phases, Comp. Chem. Eng., 27 (2003) 813–825.10.1016/S0098-1354(02)00268-5 ↗
62. Martins M.A., Oliveira L.S., Franca A.S., Modeling and Simulation of Petroleum Coke Calcination in Rotary Kilns, Fuel, 80 (2001) 1611–1622.10.1016/S0016-2361(01)00032-1 ↗
63. Mastorakos E., Massias A., Tsakiroglou C.D., Goussis D.A., Burganos V.N., CFD predictions for cement kiln including flame modeling, heat transfer and clinker chemistry, App. Math. Model., 23 (1999) 55–76.10.1016/S0307-904X(98)10053-7 ↗
64. Mio H., Komatsuki S., Akashi M., Shimosaka A., Shirakawa Y., Hidaka J., Kadowaki M., Matsuzaki S., Kunitomo K., Validation of Particle Size Segregation of Sintered Ore during Flowing through Laboratory-scale Chute by Discrete Element Method, ISIJ International, 48 (2008) 1696–1703.10.2355/isijinternational.48.1696 ↗
65. Mio H., Komatsuki S., Akashi M., Shimosaka A., Shirakawa Y., Hidaka J., Kadowaki M., Matsuzaki S., Kunitomo K., Effect of Chute Angle on Charging Behavior of Sintered Ore Particles at Bell-less Type Charging System of Blast Furnace by Discrete Element Method, ISIJ International, 49(2009) 479–486.10.2355/isijinternational.49.479 ↗
66. Mitra K., Majumder S., Runkana V., Multi-objective Pareto Optimization of an Industrial Straight Grate Iron Ore Induration Process Using Evolutionary Algorithms, Materials and Manufacturing Processes, 24 (2009) 331–342.10.1080/10426910802679428 ↗
67. Moysey P.A., Baird M.H.I., Size Segregation of Spherical Nickel Pellets in the Surface Flow of a Packed Bed: Experiments and Discrete Element Method Simulations, Powder Tech., 196 (2009) 298–308.10.1016/j.powtec.2009.08.006 ↗
68. Muralidharan G., Runkana V., Rheological Modeling of Spherical Polymeric Gels and Dispersions Incorporating the Influence of Particle Size Distribution and Surface Forces, Ind. Eng. Chem. Res., 48 (2009) 8805–8811.10.1021/ie801736q ↗
69. Nakano M., Katayama K., Kasama S., Theoretical Characterization of Steady-state Heat Wave Propagating in Iron Ore Sintering Bed, ISIJ Intl., 50 (2010) 1054–1058.10.2355/isijinternational.50.1054 ↗
70. Nyberg J., Characterization and Control of the Zinc Roasting Process, Ph.D. Thesis, Oulu University Press, Oulu, Finland, 2004.
71. Omori Y., Blast Furnace Phenomena and Modeling, Elsevier, New York, 1987.
72. Patisson F., Bellot J.P., Ablitzer D., Study of Moisture Transfer during the Strand Sintering Process, Metall. Trans. B, 21B (1990) 37–47.10.1007/BF02658114 ↗
73. Patisson F., Bellot J.P., Ablitzer D., Marliere E., Dulcy C., Steiler J.M., Mathematical Modeling of Iron Ore Sintering Process, Ironmaking Steelmaking, 18 (1991) 89–95.
74. Patisson F., Lebas E., Hanrot F., Ablitzer D., Houzelot J-L., Coal Pyrolysis in a Rotary Kiln: Part I. Model of the Pyrolysis of a Single Grain, Metall. Material. Trans. B, 31B (2000a) 381–390.10.1007/s11663-000-0056-5 ↗
75. Patisson F., Lebas E., Hanrot F., Ablitzer D., Houzelot J-L., Coal Pyrolysis in a Rotary Kiln: Part II. Overall Model of the Furnace, Metall. Material. Trans. B, 31B (2000b) 391–402.10.1007/s11663-000-0057-4 ↗
76. Peray K.E., Rotary Cement Kilns. 2nd Ed. Chemical Publishing Company Ltd., New York, USA, 1984.
77. Ranjan S., Balaji S., Panella R.A., Ydstie B.E., Silicon Solar Cell Production, Comp. Chem. Eng., 35 (2011) 1439–1453.10.1016/j.compchemeng.2011.04.017 ↗
78. Rovaglio M., Manta D., Biardi G., Falcon J., Dynamic Modeling of Waste Incineration Systems: A Startup Procedure, Comp. Chem. Eng., 18 (1994) S361–S368.10.1016/0098-1354(94)80060-X ↗
79. Runkana V., Somasundaran P., Kapur P.C., Reaction-Limited Aggregation in Presence of Short-Range Structural Forces, AIChE Journal, 51 (2005) 1233–1245.10.1002/aic.10375 ↗
80. Runkana V., Natekar P.V., Bandla V., Pothal G., Rath S.K., Jena S., Ninan T.P., Field of Process Control Equipment, Indian Patent Application No: 2235/MUM/2007 (2007).
81. Runkana V., Natekar P.V., Bandla V., Pothal G., Mathematical Modelling of Sponge Iron Production in a Rotary Kiln, SteelTech, 5 (2010a) 9–17.
82. Runkana V., Natekar P.V., Bandla V., Pothal G., Chatterjee A., Modeling and Optimisation of Direct Reduction of Iron Ore by Coal in a Rotary Kiln, Proc. XXV Intl. Mineral Process. Congress, Brisbane, Australia, 2010b, pp. 3383–3393.
83. Runkana V., Natekar P.V., Bandla V., Pothal G., Chatterjee A., Optimization of Sponge Iron Production in a Rotary Kiln through Modelling and Simulation, Steelexpress, 2010c, pp. 56–59.
84. Runkana V., Majumder S., On-line Optimization of Induration of Wet Iron Ore Pellets on a Moving Grate, US Patent No. US8571715B2 (2013).
85. Sadri M., Vakhshouri K., Hashemi M.M.Y.M., Coke Formation Possibility during Production of Reducing Gas in Large Scale Direct Reduction Plant, Ironmaking Steelmaking, 34 (2007) 115–123.10.1179/174328107X155222 ↗
86. Sadrnezhaad S.K., Ferdowsi A., Payab H., Mathematical Model for a Straight Grate Iron Ore Pellet Induration Process of Industrial Scale, Comp. Mat. Sci., 44 (2008) 296–302.10.1016/j.commatsci.2008.03.024 ↗
87. Saeman W.C., Passage of solids through rotary kilns—factors affecting time of passage, Chem. Eng. Progr., 47 (1951) 508–514.
88. Schaefer R.J., Vortmeyer D., Watson C.C., Steady State Behavior of Moving Bed Reactors, Chem. Eng. Sci., 29 (1974) 119–127.10.1016/0009-2509(74)85037-2 ↗
89. Servais C., Jones R., Roberts I., The Influence of Particle Size Distribution on the Processing of Food, J. Food Eng., 51 (2002) 201.10.1016/S0260-8774(01)00056-5 ↗
90. Shu J., Lakshmanan V.I., Convey J., Sintering and Ferrite Formation during High Temperature Roasting of Sulfide Concentrates, Can. Met. Quart., 38 (1999) 215–225.10.1179/cmq.1999.38.4.215 ↗
91. Siiriä S., Yliruusi J., Particle Packing Simulations based on Newtonian Mechanics, Powder Tech., 174 (2007) 82–92.10.1016/j.powtec.2007.01.001 ↗
92. Smith J.M., Chemical Engineering Kinetics, 3rd Ed., McGraw International Book Company , New Delhi, 1981.
93. Sohn I., Fruehan R.J., The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part I. The Role and Kinetics of Volatile Reduction, Metall. Mater. Trans. B, 36B (2005) 605–612.10.1007/s11663-005-0051-y ↗
94. Sohn I., Fruehan R.J., The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part II. The Reduction of Iron Oxide/Carbon Composites, Metall. Mater. Trans. B, 37B (2006a) 223–229.10.1007/BF02693152 ↗
95. Sohn I., Fruehan R.J., The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part III. The Simulation of Volatile Reduction in a Multi-Layer Rotary Hearth Furnace Process, Metall. Mater. Trans. B, 37B (2006b) 231–237.10.1007/BF02693153 ↗
96. Sullivan J.D., Maier C.G., Ralson O.C., Passage of solid particles through rotary cylindrical kilns, U. S. Bureau of Mines Technical Paper, No. 384 (1927).
97. Szekely J., Evans J.W., Sohn H.Y., Gas-Solid Reactions, Academic Press, New York, 1976.
98. Thurlby J.A., Batterham R.J., Turner R.E., Development and validation of a mathematical model for the moving grate induration of iron ore pellets, Intl. Jl. Mineral Process., 6 (1979) 43–64.10.1016/0301-7516(79)90031-0 ↗
99. Tsuji Y., Discrete particle simulation of gas-solid flows (from dilute to dense flows), KONA Powder and Particle Journal, 11 (1993) 57–68.10.14356/kona.1993010 ↗
100. Tsuji Y., Tanaka T., Ishida T., Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe, Powder Tech., 71 (1992) 239–250.10.1016/0032-5910(92)88030-L ↗