journal article·2016Open access

Mechanical Properties of Agglomerates Produced by the Mechanical Vibration of Cohesive Powders

Hamid Salehi Kahrizsangi, Diego Barletta, Massimo Poletto

KONA Powder and Particle Journal· Volume 33· Issue 0

Abstract

The process of granule formation from aggregative cohesive powders under the action of mechanical vibration is studied. Vibration frequency and acceleration levels were set independently in the experiments. The process of agglomerate formation is examined by measuring the size distributions of the agglomerates and their resistance under uniaxial compression. The results indicate the formation of wide particle size distributions and hard and compact agglomerates. The experimental results and the interpretation of data suggest that, in order to produce agglomerates by mechanical vibration, powders should have flow functions with a flow factor value smaller than 3. In agreement with the theoretical framework proposed, agglomerate consolidation pressures and deformation at breakage seem to be almost independent of the agglomerate diameter and the vibration conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Mineral Processing and Grinding · Cyclone Separators and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Industrial Engineering, University of Salerno, Italy

References (17)

Show source-provided references
1. Antonyuk S., Tomas J., Heinrich S., Mörl L., Breakage behaviour of spherical granulates by compression, Chemical Engineering Science, 60 (2005) 4031–4044, DOI: 10.1016/j.ces.2005.02.038.10.1016/j.ces.2005.02.038 ↗
2. Antonyuk S., Khanal M., Tomas J., Heinrich S., Mörl L., Impact breakage of spherical granules: experimental study and DEM simulation, Chemical Engineering and Processing: Process Intensification, 45 (2006) 838–856, DOI: 10.1016/j.cep.2005.12.005.10.1016/j.cep.2005.12.005 ↗
3. Barletta D., Donsì G., Ferrari G., Poletto M., Russo P., Solid flow rate prediction in silo discharge of aerated cohesive powders, AIChE Journal, 53 (2007) 2240–2253, DOI: 10.1002/aic.11212.10.1002/aic.11212 ↗
4. Barletta D., Poletto M., Aggregation phenomena in fluidization of cohesive powders assisted by mechanical vibrations, Powder Technology, 225 (2012) 93–100, DOI: 10.1016/j.powtec.2012.03.038.10.1016/j.powtec.2012.03.038 ↗
5. Barletta D., Poletto M., A device for the measurement of the horizontal to vertical stress ratio in powders, Granular Matter, 15 (2013) 487–497, DOI: 10.1007/s10035-013-0427-7.10.1007/s10035-013-0427-7 ↗
6. Barletta D., Russo P., Poletto M. Dynamic response of a vibrated fluidized bed of fine and cohesive powders, Powder Technology, 237 (2013) 276–285, DOI: 10.1016/j.powtec.2012.12.00410.1016/j.powtec.2012.12.004 ↗
7. Cruz M.A.A., Passos M.L., Ferreira W.R., Final drying of whole milk powder in vibrated-fluidized beds, Drying technology, 23 (2005) 2021–2037, DOI: 10.1080/07373930500210473.10.1080/07373930500210473 ↗
8. Janssen H.A., Versuche über Getreidedruck in Silozellen, Zeitschrift des Vereins Deutscher Ingenieure, 39 (1895) 1045–1049.
9. Ku N., Hare C., Ghadiri M., Murtagh M., Oram P., Haber R., Auto-granulation of fine cohesive powder by mechanical vibration, Procedia Engineering, 102 (2015) 72–80, DOI: 10.1016/j.proeng.2015.01.108.10.1016/j.proeng.2015.01.108 ↗
10. Kwade A., Schulze D., Shwedes J. Determination of the Stress Ratio in Uniaxial Compression Tests—Part2, Powder Handling and Processing, 6 (1994) 199–203.
11. Hencky H., Über Einige Statisch Bestimmte Fälle Des Gleichgewichts In Plastischen Körpern, Zeitschrift für Angewandte Mathematik und Mechanik, 3 (1923) 241–251, DOI: 10.1002/zamm.19230030401.10.1002/zamm.19230030401 ↗
12. Ishlinsky A.J., The axi-symmetrical problem in plasticity and Brinell test, Journal of Applied Mathematics and Mechanics (USSR), 8 (1944) 201–224.
13. Mawatari Y., Tatemoto Y., Noda K., Yamamura M., Kageyy H., Vibro-fluidization characteristics for size arranged agglomerates, Proc. of The 12th Int. Conf. on Fluidization—New Horizons in Fluidization Engineering Vancouver, Canada, May 13–18, (2007) 424–432.
14. Molerus O., Theory of yield of cohesive powders, Powder Technology, 12 (1975) 259–275, DOI: 10.1016/0032-5910(75)85025-X.10.1016/0032-5910(75)85025-X ↗
15. Schulze D., Development and application of a novel ring shear tester, Aufbereitungstechnik, 35 (1994) 524–535.
16. Parrella L., Barletta D., Boerefijn R., Poletto M., Comparison of uniaxial compaction tester and shear tester for characterization of powder flowability, Kona Journal, 26 (2008) 178–189, DOI: 10.14356/kona.2008016.10.14356/kona.2008016 ↗
17. Van Ommen J.R., Valverde J.M., Pfeffer R., Fluidization of nanopowders: a review, Journal of Nanoparticle Research, 14 (2012) 1–29, DOI: 10.1007/s11051-012-0737-4.10.1007/s11051-012-0737-4 ↗