journal article·2019-01-10Open access

Modified Ergun Equation for Airflow through Packed Bed of Loblolly Pine Grinds

Gbenga Olatunde, Oladiran Fasina

KONA Powder and Particle Journal· Volume 36· Issue 0

Abstract

Biomass grinds are typically non-spherical and are composed of particles with wide range of sizes that may vary up to 10× between the smallest and largest particle. Since fluidized bed system is often used to convert biomass into fuels, chemicals and products, the viscous and kinetic energy losses’ coefficients in the Ergun equation were determined to incorporate these unique characteristics of biomass grinds. The revised Ergun’s equation, validated using loblolly pine wood grinds, and data from other published work resulted in estimated Ergun’s K1 and K2 coefficients of 201 and 2.7 respectively. In addition, the relative mean deviation between experimental and predicted pressure drop was in general better with the modified Ergun’s equation when compared to the original Ergun’s equation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Thermochemical Biomass Conversion Processes · Forest Biomass Utilization and Management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Glanbia Nutritionals, Inc., USA

Department of Biosystems Engineering, Auburn University, USA

References (23)

Show source-provided references
1. Allen K.G., von Backstrom T.W., Kroger D.G., Packed bed pressure drop dependence on particle shape, size distribution, packing arrangement and roughness, Powder Technology, 246 (2013) 590–600.10.1016/j.powtec.2013.06.022 ↗
2. ASTM 2006, Standard E871–82—Moisture analysis for particulate wood fuels, ASTM International, West Conshohocken, PA (2009).
3. Cloete S., Johansen S.T., Amini S., Grid independence behavior of fluidized bed reactor simulations using the two fluid model: effect of particle size, Powder Technology, 269 (2015) 153–165.10.1016/j.powtec.2014.08.055 ↗
4. DOE (U.S. Department of Energy), 2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy, Volume 1: Economic Availability of Feedstocks. Langholtz M.H., Stokes B.J., Eaton L.M. (Leads), ORNL/TM-2016/160. Oak Ridge National Laboratory, Oak Ridge, TN. 4480. DOI: 10.2172/1271651 accessed 15.02.2018.
5. Dolejs V., Machac I., Pressure drop during the flow of a Newtonian fluid through a fixed bed of particulates, Chemical Engineering and Processing: Process Intensification, 34 (1995) 1–8.10.1016/0255-2701(94)00566-4 ↗
6. Fasina O.O., Flow and physical properties of switchgrass, peanut hull and poultry litter, Transactions ASAE, 49 (2006) 721–728.10.13031/2013.20470 ↗
7. Gunarathne D.S., Chmielewski J.K., Yang W., Pressure drop prediction of a gasifier bed with cylindrical biomass pellets, Applied Energy, 113 (2014) 258–266. DOI: https://doi.org/10.1016/j.apenergy.2013.07.03210.1016/j.apenergy.2013.07.032 ↗
8. Harrison L.D., Brunner K.M., Hecker W.C., A combined packed-bed friction factor equation: Extension to higher Reynolds number with wall effects, AIChE Journal, 59 (2013) 703–706.10.1002/aic.14034 ↗
9. Innocentini M.D., Salvini V.R., Macedo A., Pandolfelli V.C., Prediction of ceramic foams permeability using Ergun’s equation, Materials Research, 2 (1999) 283–289.10.1590/S1516-14391999000400008 ↗
10. Koekemoer A., Luckos A., Effect of material type and particle size distribution on pressure drop in packed beds of large particles: extending the Ergun equation, Fuel, 158 (2015) 232–238.10.1016/j.fuel.2015.05.036 ↗
11. Kunii D., Levenspiel O., Fluidization Engineering. 2nd ed. Butterworth-Heinemann, Boston, 1991, 491 pp.
12. Mawatari Y., Tatemoto Y., Noda K., Prediction of minimum fluidization velocity for vibrated fluidized bed, Powder Technology, 131 (2003) 66–70.10.1016/S0032-5910(02)00323-6 ↗
13. Nemec D., Levec J., Flow through packed bed reactors: 1. Single-phase flow, Chemical Engineering Science, 60 (2005) 6947–6957.10.1016/j.ces.2005.05.068 ↗
14. Nemec D., Bercic G., Levec J., The hydrodynamics of trickling flow in packed beds operating at high pressures. The relative permeability concept, Chemical Engineering Science, 56 (2001) 5955–5962.10.1016/S0009-2509(01)00216-0 ↗
15. Oginni O., Fasina O., Adhikari S., Fulton J., Physical and flow properties of fractionated loblolly pine grinds, Transactions ASABE, 59 (2016) 999–1008.10.13031/trans.59.11716 ↗
16. Olatunde G., Fasina O., Adhikari S., McDonald T., Duke S.R., Size measurement method for loblolly pine grinds and influence on predictability of fluidization, Canadian Biosystems Engineering, 58 (2016) 4.1–4.10.10.7451/CBE.2016.58.4.1 ↗
17. Olatunde G., Fasina O., Adhikari S., McDonald T., Duke S.R., Moisture effect on fluidization behavior of loblolly pine wood grinds, Biomass Conversion and Biorefinery, 7 (2017) 207–220.10.1007/s13399-016-0223-9 ↗
18. Oliveira T.J.P., Cardoso C.R., Ataíde C.H., Bubbling fluidization of biomass and sand binary mixtures: Minimum fluidization velocity and particle segregation, Chemical Engineering and Processing: Process Intensification, 72 (2013) 113–121.10.1016/j.cep.2013.06.010 ↗
19. Ozahi E., Gundogud M.Y., Carpinlioglu M.O., A modification on Ergun’s correlation for use in cylindrical packed beds with non-spherical particles, Advanced Powder Technology, 19 (2008) 369–381.10.1163/156855208X314985 ↗
20. Quinn H.M., A reconciliation of packed column permeability data: Deconvoluting the Ergun papers, Journal of Materials, Article ID 548482 (2014) 24 pages.10.1155/2014/548482 ↗
21. Reynolds O., Brightmore A.W., Morroby W.H., Papers on Mechanical and Physical Subjects, Volume 2. Cambridge University Press, 1901, 780 pp.
22. SAS (The SAS System for Windows), Version 9.2., SAS Institute, Cary, NC, 2011.
23. Srivastava A., Sundaresan S., Role of wall friction in fluidization and standpipe flow, Powder Technology, 124 (2002) 45–54.10.1016/S0032-5910(01)00471-5 ↗