journal article·1985Open access

Relationships between Particle Size and Fracture Energy for Single Particle Crushing [Translated]†

Yoshiteru Kanda, Shigeru Sano, Fumio Saito, Saburo Yashima

Abstract

An experimental study of single-particle crushing at slow compression rate was carried out for two kinds of glassy and five kinds of natural materials. The specimens were almost spherical particles of 0.5 to 3.0 cm in diameter. The relationships between particle size and fracture energy (strain energy) were calculated by using the results of the size effect ranging from about 10 cm to 0.0030 cm of single particle crushing, as shown in the previous papers. The experimental results are summarized as follows: 1) The fracture energies obtained were larger than the values calculated from the theoretical equations for limestone, marble and gypsum. 2) For natural materials, the specific fracture energies rapidly increased with decreasing particle size within the range of particle size smaller than about 500 µm.† This report was originally printed in KAGAKU KOGAKU RONBUNSHU, 10(1), 108-112 (1984) in Japanese, before being translated into English by KONA Editorial Committee with the permission of the editorial committee of the Soc. Chemical Engineers, Japan.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mineral Processing and Grinding · Granular flow and fluidized beds · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Yamagata University

Ichinoseki Technical College

Department of Chemical Engineering, Yokohama National University

Research Institute of Mineral Dressing and Metallurgy, Tohoku University

References

Reference metadata was not supplied for this record.