journal article·2017Open access

Flow of Bi-modal Slurry through Horizontal Bend

Deo Raj Kaushal, Arvind Kumar, Yuji Tomita, Shigeru Kuchii, Hiroshi Tsukamoto

KONA Powder and Particle Journal· Volume 34· Issue 0

Abstract

Extensive experimental investigations were carried out for pressure drop and concentration profile in the flow of bi-modal slurry comprising silica sand and fly ash with mean diameter of 450 and 75 m, respectively, at six silica sand:flyash ratios (namely, 100:0, 90:10, 80:20, 70:30, 60:40 and 0:100) in a 53 mm diameter horizontal bend. Flow velocity was varied up to 3.56 m/s (namely, 1.78, 2.67 and 3.56 m/s) at two efflux concentrations of 8.82 % and 16.28 % for each silica sand:flyash ratio. The experimental data were compared with the CFD modelling results using an Eulerian two-phase model available in the FLUENT software. Eulerian model predicted almost all the experimental data collected in the present study for pressure drop and concentration profile with fair accuracy. The bend loss coefficient k t was found to decrease with increase in percentage of flyash for silica sand:flyash ratio up to 70:30. Further increase in flyash did not show any significant change in the value of k t .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Mineral Processing and Grinding · Drilling and Well Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, IIT Delhi, India

Department of Mechanical Engineering, YMCA UST, India

Kyushu Institute of Technology, Japan

Kitakyushu National College of Technology, Japan

References (19)

Show source-provided references
1. Ahmed M., Singh S.N., Seshadri V., Pressure drop in a long radius 90° horizontal bend for the flow of multi-sized heterogeneous slurries, International Journal of Multiphase Flow, 1994 (21) 329–334.10.1016/0301-9322(94)00071-Q ↗
2. Boothroyde J., Jacobs B.E.A., Jenkins P., Coarse particle hydraulic transport, Proceedings Hydrotransport, BHRA Fluid Engineering, Cranfield, Bedford, England, 6 (1979), 405–428.
3. FLUENT 6.3.26 User’s Guide, Chapter 23: Modelling Multiphase Flows, Fluent Incorporation, USA, 2006.
4. Gidaspow D., Bezburuah R., Ding J., Hydrodynamics of circulating fluidized beds, kinetic theory approach in fluidization VII, Proc. 7th Engineering Foundation Conference on Fluidization, 1992.
5. Gopaliya M.K., Kaushal D.R., Analysis of Effect of Grain Size on Various Parameters of Slurry Flow through Pipeline Using CFD, Particulate Science and Technology: An International Journal, 33 (2015) 369–384.10.1080/02726351.2014.971988 ↗
6. Gopaliya M.K., Kaushal D.R., Modeling of sand-water slurry flow through horizontal pipe using CFD, J. Hydrol. Hydromech., 64 (2016) 261–272.10.1515/johh-2016-0027 ↗
7. Gupta R., Singh S.N., Seshadri V., Migration of solid particles in the heterogeneous slurry flow through a 90° bend, Indian Journal of Engineering and Material Science, 4 (1997) 10–20.
8. Hayashi H., Sampei T., Oda S., Ohtomo S., Some Experimental Studies on Iron Concentrate Slurry Transportation in Pilot Plant, Proceedings of Hydrotransport, BHRA Fluid Engineering, Cranfield, Bedford, England, 7 (1980) D2.
9. Ito H., Pressure losses in smooth pipe bends, Journal of Basic Engineering, ASME, 82 (1960) 131–140.10.1115/1.3662501 ↗
10. Kaushal D.R., Thinglas T., Tomita Y., Kuchii S., Tsukamoto H., CFD Modeling for Pipeline Flow of Fine Particles at High Concentration, Int. J. of Multiphase Flow, 43 (2012) 85–100.10.1016/j.ijmultiphaseflow.2012.03.005 ↗
11. Kaushal D.R., Kumar A., Tomita Y., Kuchii S., Tsukamoto H., Flow of mono-dispersed particles through horizontal bend, Int. J. of Multiphase Flow, 52 (2013) 71–91.10.1016/j.ijmultiphaseflow.2012.12.009 ↗
12. Kazanskij B.H., Hinsch J., Influence of added fine particles on the flow structure and the pressure losses in sand-water mixture, Proceedings of Hydrotransport, BHRA Fluid Engineering, Colardo, USA, 3 (1974) 11–21.
13. Kumar A., Kaushal D.R., Kumar U., Bend Pressure Drop Experiments compared with FLUENT, Institution of Civil Engineers journal of Engineering and Computational Mechanics, Thomas Telford Publication London, 161 (2008) 35–42.10.1680/eacm.2008.161.1.35 ↗
14. Kumar A., Experimental and CFD modeling of hydraulic and pneumatic conveying through pipeline, Ph.D. Thesis, Indian Institute of Technology Delhi, 2010.
15. Lun C.K.K., Savage S.B., Jeffrey D.J., Chepurniy N., Kinetic theories for granular flow: inelastic particles in couette flow and slightly inelastic particles in a general flow field, Journal of Fluid Mechanics, 140 (1984) 223–256.10.1017/S0022112084000586 ↗
16. Messa G.V., Malavasi S., Numerical Prediction of Particle Distribution of Solid-Liquid Slurries in Straight Pipes and Bends, Engineering Applications of Computational Fluid Mechanics, 8 (2014) 356–372.10.1080/19942060.2014.11015521 ↗
17. Thinglas T., Kaushal D.R., Comparison of two dimensional and three Dimensional CFD Modeling of Invert Trap Configuration to be used in Sewer Solid Management, Particuology, 6 (2008a) 176–184.10.1016/j.partic.2007.12.003 ↗
18. Thinglas T., Kaushal D.R., Three Dimensional CFD Modeling for Optimization of Invert Trap Configuration to be used in Sewer Solid Management, Particulate Science and Technology, 26 (2008b) 507–519.10.1080/02726350802367951 ↗
19. Verkerk C.G., Transport of Fly Ash Slurries. Proceedings of Hydrotransport, BHRA Fluid Engineering, Johannesburg, South Africa, 8 (1982) 307–316.