journal article·2013Open access

Synthesis and Applications of Hollow Particles

Masayoshi Fuji, Yong Sheng Han, Chika Takai

KONA Powder and Particle Journal· Volume 30· Issue 0

Abstract

Hollow particle is a promising material with the special properties of low densities, thermal insulation and distinct optical activity. Due to their potential promising applications in the fields of drug delivery, catalysis and optics, a great effort has been devoted to develop new preparation methods which are collected and reviewed in this paper. All these methods are classified into three groups, namely sacrificed template method, in-situ template method and device-based method based on the characteristics of the methods. The advantage and disadvantage of each method are compared and the trends for preparation are pointed out. In light of the wide applications of hollow particles, the later part of this paper focuses on their potential applications in industry. Their applications are not limited in the fields of papermaking, rubber processing and plastic improvement, but also expanded to electronic, catalytic and biological areas.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gold and Silver Nanoparticles Synthesis and Applications · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Advanced Ceramics Research Center, Nagoya Institute of Technology

Institute of Process Engineering, Chinese Academy of Science

Funding

Japan Society for the Promotion of Science · Japan Science and Technology Agency

References (100+)

Show source-provided references
1. 1) Oldenburg, S. J., Averitt, R. D., Westcott, S. L. and Halas, N. J. (1998): Nanoengineering of optical resonances. Chemical Physics Letters, 288, pp.243–247.10.1016/S0009-2614(98)00277-2 ↗
2. 2) Kim, S. W., Kim, M., Lee, W. Y. and Hyeon, T. (2002): Fabrication of hollow palladium spheres and their successful application to the recyclable heterogeneous catalyst for suzuki coupling reactions. Journal of the American Chemical Society, 124, pp.7642–7643.10.1021/ja026032z ↗
3. 3) Sershen, S. R., Westcott, S. L., Halas, N. J. and West, J. L. (2000): Temperature-sensitive polymer-nanoshell composites for photothermally modulated drug delivery. Journal of Biomedical Materials Research, 51, pp.293–298.10.1002/1097-4636(20000905)51:3<293::AID-JBM1>3.0.CO;2-T ↗
4. 4) West, J. L. and Halas, N. J. (2000): Applications of nanotechnology to biotechnology: Commentary. Current Opinion in Biotechnology, 11, pp.215–217.10.1016/S0958-1669(00)00082-3 ↗
5. 5) Oldenburg, S. J., Jackson, J. B., Westcott, S. L. and Halas, N. J. (1999): Infrared extinction properties of gold nanoshells. Applied Physics Letters, 75, pp.2897–2899.10.1063/1.125183 ↗
6. 6) Marinakos, S. M., Novak, J. P., Brousseau, L. C. III, House, A. B., Edeki, E. M., Feldhaus, J. C. and Feldheim, D. L. (1999): Gold particles as templates for the synthesis of hollow polymer capsules control of capsule dimensions and guest encapsulation. Journal of the American Chemical Society, 121, pp.8512–8518.10.1021/ja9909125 ↗
7. 7) Marinakos, S. M., Anderson, M. F., Ryan, J. A., Martin, L. D. and Feldhein, D. L. (2001): Encapsulation, permeability, and cellular uptake characteristics of hollow nanometer-sized conductive polymer capsules, The Journal of Physical Chemistry B, 105, pp.8872–8876.10.1021/jp010820d ↗
8. 8) Tartaj, P., Morales, M. P., Veintemillas-Verdaguer, S., Gonalez-Carreno, T. and Serna, C. J. (2003): The preparation of magnetic nanoparticles for applications in biomedicine, Journal of Physics D: Applied Physics, 36, R182–R197.10.1088/0022-3727/36/13/202 ↗
9. 9) Cochran, J. K. (1998): Ceramic hollow spheres and their applications. Current Opinion in Solid State and Materials Science, 3, pp.474–479.10.1016/S1359-0286(98)80010-7 ↗
10. 10) Ohmori, M. and Matijevic, E. (1992): Preparation and properties of uniform coated colloidal particles. VII. Silica on hematite. Journal of Colloid and Interface Science, 150, pp.594–598.10.1016/0021-9797(92)90229-F ↗
11. 11) Wang, L., Sasaki, T., Ebina, Y., Kurashima, K. and Watanabe, M. (2002): Fabrication of controllable ultrathin hollow shells by layer-by-layer assembly of exfoliated titania nanosheets on polymer templates. Chemistry of Materials, 14, pp.4827–4832.10.1021/cm020685x ↗
12. 12) Caruso, F., Shi, X., Caruso, R. A. and Susha, A. (2001): Hollow titania spheres from layered precursor deposition on sacrificial colloidal core particles. Advanced Materials, 13, pp.740–744.10.1002/1521-4095(200105)13:10<740::AID-ADMA740>3.0.CO;2-6 ↗
13. 13) Braun, P. V. and Stupp, S. I. (1999): CdS mineralization of hexagonal, lamellar, and cubic lyotropic liquid crystals. Materials Research Bulltein, 34, pp.463–469.10.1016/S0025-5408(99)00030-6 ↗
14. 14) Hubert, D. H. W., Jung, M. and German, A. L. (2000): Vesicle templating. Advanced Materials, 12, pp.1291–1294.10.1002/1521-4095(200009)12:17<1291::AID-ADMA1291>3.0.CO;2-Z ↗
15. 15) Schmidt, H. T. and Ostafin, A. E. (2002): Liposome directed growth of calcium phosphate nanoshells. Advanced Materials, 14, pp.532–535.10.1002/1521-4095(20020404)14:7<532::AID-ADMA532>3.3.CO;2-W ↗
16. 16) Brusinsma, P. J., Kim, A. Y., Liu, J. and Baskaran, S. (1997): Mesoporous silica synthesized by solvent evaporation: spun fibers and spray-dried hollow spheres. Chemistry of Materials, 9, pp.2507–2512.10.1021/cm970282a ↗
17. 17) Jafeliccit Jr., M., Pavalos, M. R., Jose de Santos, F. and Jose de Santos, A. (1999): Hollow silica particles from microemulsion. Journal of Non-Crystalline Solids, 247, pp.98–102.10.1016/S0022-3093(99)00040-X ↗
18. 18) Shin, T., Fuji, M., Takei, T., Chikazawa, M., Tanabe, K. and Mitsuhashi, K. (2002): Proceeding of the 105th Meeting of the Society of Inorganic Materials, Japan, November 14–15, pp.78–79.
19. 19) Sun, Y., Mayers, B. T. and Xia, Y. (2002): Template-engaged replacement reaction:? a one-step approach to the large-scale synthesis of metal nanostructures with hollow interiors. Nano Letters, 2, pp.481–485.10.1021/nl025531v ↗
20. 20) Yin, Y., Lu, Y., Gates, B. and Xia, Y. (2001): Synthesis and characterization of mesoscopic hollow spheres of ceramic materials with functionalized interior surfaces. Chemistry of Materials, 13, pp.1146–1148.10.1021/cm000933u ↗
21. 21) Ung, T., Liz-Marzan, L. M. and Mulvaney, P. (1998): Controlled method for silica coating of silver colloids. Influence of coating on the rate of chemical reactions. Langmuir, 14, pp.3740–3748.10.1021/la980047m ↗
22. 22) Caruso, R. A., Susha, A. and Caruso, F. (2001): Multilayered titania, silica, and laponite nanoparticle coatings on polystyrene colloidal templates and resulting inorganic hollow spheres. Chemistry of Materials, 13, pp.400–409.10.1021/cm001175a ↗
23. 23) Mulvaney, P., Giersig, M., Ung, T. and Liz-Marzán, L. M. (1997): Direct observation of chemical reactions in silica-coated gold and silver nanoparticles. Advanced Materials, 9, pp.570–575.10.1002/adma.19970090712 ↗
24. 24) Caruso, F., Caruso, R. A. and Möhwald, H. (1998): Nanoengineering of inorganic and hybrid hollow spheres by colloidal templating. Science, 282(6), pp.1111–1114.10.1126/science.282.5391.1111 ↗
25. 25) Yin, J., Qian, X. Yin, J. Shi, M. Zhang, J. and Zhou, G. (2003): Preparation of polystyrene/zirconia core-shell microspheres and zirconia hollow shells. Inorganic Chemistry Communications, 6, pp.942–945.10.1016/S1387-7003(03)00156-4 ↗
26. 26) Wang, X. D., Yang, W. L., Tang, Y., Wang, Y. J., Fu, S. K. and Gao, Z. (2000): Fabrication of hollow zeolite spheres. Chemical Communications, 21, pp.2161–2162.10.1039/b006539k ↗
27. 27) Wang, L. Z., Ebina, Y., Takada, K. and Sasaki, T. (2004): Ultrathin hollow nanoshells of manganese oxide. Chemical Communications, 9, pp.1074–1075.10.1039/b402209b ↗
28. 28) Caruso, F., Spasova, M., Susha, A., Giersig, M. and Caruso, R. A. (2001): Magnetic nanocomposite particles and hollow spheres constructed by a sequential layering approach. Chemistry of Materials, 13, pp.109–116.10.1021/cm001164h ↗
29. 29) Yin, J., Qian, X., Yin, J., Shi, M. and Zhou, G. (2003): Preparation of ZnS/PS microspheres and ZnS hollow shells. Materials Letters, 57, pp.3859–3863.10.1016/S0167-577X(03)00217-9 ↗
30. 30) Song, C. X., Gu, G. H., Lin, Y. S. and Wang, H. (2003): Preparation and characterization of CdS hollow spheres. Materials Research Bulltein, 38, pp.917–924.10.1016/S0025-5408(02)01064-4 ↗
31. 31) Decher, G. (1997): Fuzzy nanoassemblies: toward layered polymeric multicomposites. Science, 277, pp.1232–1237.10.1126/science.277.5330.1232 ↗
32. 32) Wang, D. and Caruso, F. (2002): Polyelectrolyte-coated colloid spheres as templates for sol-gel reactions. Chemistry of Materials, 14, pp.1909–1913.10.1021/cm0211251 ↗
33. 33) Caruso, F., Lichtenfeld, H., Giersig, M. and Möhwald, H. (1998): Electrostatic self-assembly of silica nanoparticle-polyelectrolyte multilayers on polystyrene latex particles. Journal of the American Chemical Society, 120, pp.8523–8524.10.1021/ja9815024 ↗
34. 34) Caruso, F., Caruso, R. A. and Möhwald, H. (1999): Production of hollow microspheres from nanostructured composite particles. Chemistry of Materials, 11, pp.3309–3314.10.1021/cm991083p ↗
35. 35) Donath, E., Sukhorukov, G. B., Caruso, F., Davis, S. A. and Möhwald, H. (1998): Novel hollow polymer shells by colloid-templated assembly of polyelectrolytes. Angewandte Chemie International Edition, 37, pp.2201–2205.10.1002/(SICI)1521-3773(19980904)37:16<2201::AID-ANIE2201>3.0.CO;2-E ↗
36. 36) Caruso, F., Schuler, C. and Kurch, D. G. (1999): Core-shell particles and hollow shells containing metallo-supramolecular components. Chemistry of Materials, 11, pp.3394–3399.10.1021/cm9911058 ↗
37. 37) Caruso, F., Susha, A. S., Giersig, M. and Möhwald, H. (1999): Magnetic core-shell particles: preparation of magnetite multilayers on polymer latex microspheres. Advanced Materials, 11, pp.950–953.10.1002/(SICI)1521-4095(199908)11:11<950::AID-ADMA950>3.0.CO;2-T ↗
38. 38) Caruso, F. and Möhwald, H. (1999): Protein multilayer formation on colloids through a stepwise self-assembly technique. Journal of the American Chemical Society, 121, pp.6039–6046.10.1021/ja990441m ↗
39. 39) Gittins, D. and I Caruso, F. (2000): Multilayered polymer nanocapsules derived from gold nanoparticle templates. Advanced Materials, 12, pp.1947–1949.10.1002/1521-4095(200012)12:24<1947::AID-ADMA1947>3.0.CO;2-8 ↗
40. 40) Iler, R.K. (1979): “The Chemistry of Silica”, Wiley Interscience, New York.
41. 41) Takai, C., Watanabe, H., Asai, T., Fuji, M. (2012): Determine apparent shell density for evaluation of hollow silica nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 404, pp.101–105.10.1016/j.colsurfa.2012.04.019 ↗
42. 42) Walsh, D. and Mann, S. (1995): Fabrication of hollow porous shells of calcium carbonate from self-organizing media. Nature, 377, pp.320–323.10.1038/377320a0 ↗
43. 44) Wang, L. Z., Ebina, Y., Takada, K. and Sasaki, T. (2004): Ultrathin hollow nanoshells of manganese oxide. Chemical Communications, pp.1074–1075.10.1039/b402209b ↗
44. 45) Wang, X. D., Yang, W. L., Tang, Y., Wang, Y. J., Fu, S. K. and Gao, Z. (2000): Fabrication of hollow zeolite spheres. Chemical Communications, pp.2161–2162.10.1039/b006539k ↗
45. 46) Bour Cinos, A. B., Karakassidas, M. A. and Petridis, D. (2001): Synthesis and characterization of hollow clay microspheres through a resin template approach. Chemical Communications, 16, pp.1518–1519.10.1039/b104922b ↗
46. 47) Neves, M. C. and Trindade, T. (2003): Preparation of hollow shells of zinc oxide/bismuth (III) vanadate. Materials Research Bulletin, 38, pp.1013–1020.10.1016/S0025-5408(03)00080-1 ↗
47. 48) Neves, M. C., Trindade, T., Timmons, A. M. B., Jesus, J. D. P. de (2001): Synthetic hollow zinc oxide microparticles. Materials Research Bulletin, 36, pp.1099–1108.10.1016/S0025-5408(01)00562-1 ↗
48. 49) Kawahashi, N. and Shiho, H. (2000): Copper and copper compounds as coatings on polystyrene particles and as hollow spheres. Journal of Materials Chemistry, 10, pp.2294–2297.10.1039/b000788i ↗
49. 50) Zhang, X., Xie, Y., Xu, F., Xu, D. and Liu, X. H. (2004): In situ polymerization template route to CdSe hollow spheres under UV irradiation. Inorganic Chemistry Communications, 7, pp.417–419.10.1016/j.inoche.2003.12.031 ↗
50. 51) Hu, Y., Chen, J., Chen, W., Lin, X. and Li, X. (2003): Synthesis of novel nickel sulfide submicrometer hollow spheres. Advanced Materials, 15, pp.726–729.10.1002/adma.200304687 ↗
51. 52) Park, J. H., Shin, C. O., Moon, S. K. and Oh, S. G. (2003): Preparation of hollow silica microspheres in W/O emulsions with polymers. Journal of Colloid Interface Science, 266, pp.107–114.10.1016/S0021-9797(03)00645-3 ↗
52. 53) Park, J. H., Bae, S. Y. and Oh, S. G. (2003): Fabrication of hollow silica microspheres through the self-assembly behaviour of polymers in W/O emulsion. Chemistry Letters, 32, pp.598–599.10.1246/cl.2003.598 ↗
53. 54) Jafelicci Jr, M., Davolos, M. R., Sartos, F. J. Dos and Andrade, S. J. de (1999): Hollow silica particles from microemulsion. Journal of Non-crystalline Solids, 247, pp.98–102.10.1016/S0022-3093(99)00040-X ↗
54. 55) Sun, Q. Y., Kooyman, P. J., Grossmann, J. G., Bomans, P. H. H. and Frederik, P. M. (2003): The formation of well-defined hollow silica spheres with multilamellar shell structure. Advanced Materials, 15, pp.1097–1100.10.1002/adma.200304793 ↗
55. 56) Li, W. J., Sha, X. X., Dong, W. J. and Wang, Z. C. (2002): Synthesis of stable hollow silica microspheres with mesoporous shell in nonionic W/O emulsion. Chemical Communications, pp.2434–2435.10.1039/b206020e ↗
56. 57) Yu, C. Z., Tian, B. Z., Fan, J., Stucky, G. D. and Zhao, D. Y. (2002): Synthesis of siliceous hollow spheres with ultra large mesopore wall structures by reverse emulsion templating. Chemistry Letters, 31, pp.62–63.10.1246/cl.2002.62 ↗
57. 58) Schacht, S., Huo, Q., Voigt-Martin, I. G. and Stucky, G. D. (1996): Oil-water interface templating of mesoporous macroscale structures. Science, 273, pp.768–771.10.1126/science.273.5276.768 ↗
58. 59) Walsh, D., Lebeau, B. and Mann, S. (1999): Morphosynthesis of calcium carbonate (vaterite) microsponges. Advanced Materials 11, pp.324–328.10.1002/(SICI)1521-4095(199903)11:4<324::AID-ADMA324>3.0.CO;2-A ↗
59. 60) Thomas, J. A., Seton, L., Davey, R. J. and Dewolf, C. E. (2002): Using a liquid emulsion membrane system for the encapsulation of organic and inorganic substrates within inorganic microcapsules. Chemical Communications pp.1072–1073.10.1039/b202277j ↗
60. 61) Nakahara, Y., Mizuguchi, M. and Miyata, K. (1979): Effects of surfactants on CaCO3 spheres prepared by interfacial reaction method. Journal of Colloid Interface Science 68, pp.401–407.10.1016/0021-9797(79)90298-4 ↗
61. 62) Dinsmone, A. D., Hsu, A. F., Nikolaids, M. G., Marquez, M., Bausch, A. R. and Weitz, D. A. (2002): Colloidosomes: selectively permeable capsules composed of colloidal particles. Science 298, pp.1006–1009.10.1126/science.1074868 ↗
62. 63) Wu, M. M., Wang, G. G., Xu, H. F., Long, J. B., Shek, F. L. Y., Lo, S. M. F., Willians, I. D., Feng, S. H. and Xu, R. R. (2003): Hollow spheres based on mesostructured lead titanate with amorphous framework. Langmuir 19, pp.1362–1367.10.1021/la020159k ↗
63. 64) Velev, O. D., Furusawa, K. and Nagayama, K. (1996): Assembly of latex particles by using emulsion droplets as templates. 1. microstructured hollow spheres. Largmuir 12, pp.2374–2384.10.1021/la9506786 ↗
64. 65) Nakashima, T. and Kimizuka, N. (2003): Interfacial synthesis of hollow TiO2 microspheres in ionic liquids. Journal of the American Chemical Society 125, pp.6386–6387.10.1021/ja034954b ↗
65. 66) Won, Y. Y., Davis, H. T. and Bates, F. S. (1996): Giant wormlike rubber micelles. Science 283, pp.960–963.10.1126/science.283.5404.960 ↗
66. 67) Hajduk, D. A., Kossuth, M. B., Hillmyer, M. A. and Bates, F. S. (1998): Complex phase behavior in aqueous solutions of poly(ethylene oxide)-poly(ethylethylene) block copolymers. The Journal of Physical Chemistry B 102, pp.4269–4276.10.1021/jp973323z ↗
67. 68) Warriner, H. E., Idziak, S. H. J., Slack, N. L., Davidson, P., Safinyn, C. R. (1996): Lamellar biogels: fluid-membrane-based hydrogels containing polymer lipids. Science 271, pp.969–973.10.1126/science.271.5251.969 ↗
68. 69) Yu, K. and Eisenberg, A. (1998): Bilayer morphologies of self-assembled crew-cut aggregates of amphiphilic PS-b-PEO diblock copolymers in solution. Macromolecules 31, pp.3509–3518.10.1021/ma971419l ↗
69. 70) Discher, B. M., Won, Y. Y., Ege, D. S., Lee, J. C. M., Bates, F. S., Discher, D. E. and Hammer, D. A. (1999): Polymersomes: tough vesicles made from diblock copolymers. Science 284, pp.1143–1146.10.1126/science.284.5417.1143 ↗
70. 71) Jain, S. and Bates, F. S. (2003): On the origins of morphological complexity in block copolymer surfactants. Science 300, pp.460–464.10.1126/science.1082193 ↗
71. 72) Jurg, H. M., Price, K. E. and Mcquade, D. T. (2003): Synthesis and characterization of cross-linked reverse micelles. Journal of the American Chemical Society 725, pp.5351–5355.
72. 73) Katagiri, K. and Caruso, F. (2005): Monodisperse polyelectrolyte-supported asymmetric lipid-bilayer vesicles. Advanced Materials 17, pp.738–743.10.1002/adma.200401441 ↗
73. 74) Katagiri, K. and Caruso, F. (2004): Functionalization of colloids with robust inorganic-based lipid coatings. Macromolecules 37, pp.9947–9953.10.1021/ma048706r ↗
74. 75) Tanev, P. T. and Pinnavaia, T. J. (1996): Biomimetic templating of porous lamellar silicas by vesicular surfactant assemblies. Science 271, pp.1267–1269.10.1126/science.271.5253.1267 ↗
75. 76) Ren, T. Z., Yuan, Z. Y. and Su, B. L. (2003): Surfactant-assisted preparation of hollow microspheres of mesoporous TiO2. Chemical Physics Letters 374, pp.170–175.10.1016/S0009-2614(03)00722-X ↗
76. 77) Wong, M. S., Cha, J. N., Choi, K. S., Deming, T. J. and Stucky, G. D. (2002): Assembly of nanoparticles into hollow spheres using block copolypeptides. Nano Letters 6, pp.583–587.10.1021/nl052134m ↗
77. 78) Qi, L. M., Li, J. and Ma, J. M. (2002): Biomimetic morphogenesis of calcium carbonate in mixed solutions of surfactants and double-hydrophilic block copolymers. Advanced Materials 14, pp.300–303.10.1002/1521-4095(20020219)14:4<300::AID-ADMA300>3.3.CO;2-G ↗
78. 79) Lyu, Y. Y., Yi, S. H., Shon, J. K., Chang, S., Pu, L. S., Lee, S. Y., Yie, J. E., Char, K., Stucky, G. O. and Kim, J. M. (2004): Highly stable mesoporous metal oxides using nano-propping hybrid gemini surfactants. Journal of the American Chemical Society 126, pp.2310–2311.10.1021/ja0390348 ↗
79. 80) Jarg, J. and Lee, K. (2002): Facile fabrication of hollow polystyrene nanocapsules by microemulsion polymerization. Chemical Communications pp.1098–1099.10.1039/b201977a ↗
80. 81) Lin, H. P., Mou, C. Y., Liu, S. B., Tang, C. Y. (2001): Hollow spheres of MCM-41 aluminosilicate with pinholes. Chemical Communications, pp.1970–1971.10.1039/b104600b ↗
81. 82) Virtudazo, R. V. R., Watanabe, H., Shirai, T. and Takahashi, M. (2011): Direct template approach for the formation of (anisotropic shape) hollow silicate micro particles. IOP Conference Series: Materials Science and Engineering 18, pp.062014.10.1088/1757-899X/18/6/062014 ↗
82. 83) Virtudazo, R. V. R., Fuji, T., Shirai, T. (2011): Fabrication of calcined hierarchical porous hollow silicate micro-size spheres via double emulsion process. Materials Letters 65, pp.3112–3115.10.1016/j.matlet.2011.06.085 ↗
83. 84) Wang, J.-X., Wen, L.-X., Liu, R.-J., Chen, J.-F. (2005): Needle-like calcium carbonate assisted self-assembly of mesostructured hollow silica nanotubes. Journal of Solid State Chemistry 178, pp.2383?2389.10.1016/j.jssc.2005.05.025 ↗
84. 85) Gao, L., Luo, L., Chen, J. and Shao, L. (2005): Synthesis of hollow titania using nanosized calcium carbonate as a template. Chemistry Letters 34, pp.138–139.10.1246/cl.2005.138 ↗
85. 86) Shin, T., Fuji, M., Takei, T., Chikazawa, M., Tanabe, K. and Mitsuhashi, K. (2003): Proceeding of 83rd Annual Meeting of the Chemical Society of Japan, March p.366.
86. 87) Fuji, M., Takai, C., Tarutani, Y., Takei, T. and Takahashi, M. (2007): Surface properties of nanosize hollow silica particles on the molecular level, Advanced Powder Technology 18, pp.81–91.10.1163/156855207779768124 ↗
87. 88) Fuji, M., Shin, T., Watanabe, H. and Takei, T. (2011): Shape-controlled hollow silica nanoparticles synthesized by an inorganic particle template method. Advanced Powder Technology.10.1016/j.apt.2011.06.002 ↗
88. 89) Takai, C., Fuji, M. and Fujimoto, K. (2011): Skeletal silica nanoparticles prepared by control of reaction polarity. Chemistry Letters 40, No.12, pp.1346–1348.10.1246/cl.2011.1346 ↗
89. 90) Yuan, L., Chen, J. F., Wang, J. X., Shao, L. and Wang, W. C. (2004): A novel pathway for synthesis of silica hollow spheres with mesostructured walls, Materials Letters 58, pp.2105–2108.10.1016/j.matlet.2004.01.007 ↗
90. 91) Li, Z. Z., Wen, L. X., Shao, L. and Chen, J. F. (2004): Fabrication of porous hollow silica nanoparticles and their applications in drug release control. Journal of Controlled Release 98, pp.245–254.10.1016/j.jconrel.2004.04.019 ↗
91. 92) Yuan, L., Chen, J. F. and Wang, W. C. (2004): Study on the silica hollow spheres by experiment and molecular simulation. Applied Surface Science 230, pp.319–326.10.1016/j.apsusc.2004.02.042 ↗
92. 93) Shchukin, D. G., Patel, A. A., Sukhorukov, G. B. and Lvov, Y. M. (2004): Nanoassembly of biodegradable microcapsules for DNA encasing. Journal of the American Chemical Society 126, pp.3374–3375.10.1021/ja036952x ↗
93. 94) Itoh, Y., Matsusaki, M., Kida, T. and Akashi, M. (2004): Preparation of biodegradable hollow nanocapsules by silica template method. Chemistry Letters 33, pp.1552–1553.10.1246/cl.2004.1552 ↗
94. 95) Wang, Y. Yu, A. and Caruso, F. (2005): Nanoporous polyelectrolyte spheres prepared by sequentially coating sacrificial mesoporous silica spheres. Angewandte Chemie International Edition 44, pp.2888–2892.10.1002/anie.200462135 ↗
95. 96) Yu, A., Wang, Y., Barlow, E. and Caruso, F. (2005): Mesoporous silica particles as templates for preparing enzyme-loaded biocompatible microcapsules. Advanced Materials 17, pp.1737–1741.10.1002/adma.200402045 ↗
96. 97) Yoon, S. B., Sohn, K., Kim, J. Y., Shin, C. H., Yu, J. S. and Hyeon, T. (2002): Fabrication of carbon capsules with hollow macroporous core/mesoporous shell structures. Advanced Materials 14, pp.19–21.10.1002/1521-4095(20020104)14:1<19::AID-ADMA19>3.0.CO;2-X ↗
97. 98) Mandal, T. K., Fleming, M. S. and Walt, D. R. (2000): Production of hollow polymeric microspheres by surface-confined living radical polymerization on silica templates. Chemistry of Materials 12, pp.3481–3487.10.1021/cm000514x ↗
98. 99) Kamata, K., Lu, Y. and Xia, Y. (2003): Synthesis and characterization of monodispersed core-shell spherical colloids with movable cores. Journal of the American Chemical Society 125, pp.2384–2385.10.1021/ja0292849 ↗
99. 100) Jiang, P., Bertone, J. F. and Colvin, V. L. (2001): A Lost-wax approach to monodisperse colloids and their crystals. Science 291, pp.453–457.10.1126/science.291.5503.453 ↗
100. 101) Wang, H., Yu, J. S., Li, X. D. and Kim, D. P. (2004): Inorganic polymer-derived hollow SiC and filled SiCN sphere assemblies from a 3DOM carbon template. Chemical Communications pp.2352–2353.10.1039/b407350a ↗