journal article·2013Open access

Nanostructured Media to Improve the Performance of Fibrous Filters

Anna Jackiewicz, Albert Podgórski, Leon Gradoń, Jakub Michalski

KONA Powder and Particle Journal· Volume 30· Issue 0

Abstract

The main objective of this study was to present one of the possibilities of increasing the initial efficiency of aerosol particle removal from the gas stream, i.e. the application of nanofibers in the filter structure. The modified melt-blown technique of producing such thin fibers is hereby presented. During this work, various filter media with fiber diameters from micro- to nanosized made of selected polymers differing in melt flow index were obtained via this method. Their morphology was precisely analysed using high-resolution equipment. The crucial parameters characterizing those fibrous materials were determined: an initial pressure drop across the filters and an initial filtration efficiency. The behavior of clean filters composed of microfibers were compared with the behavior of those made of nanofibers. An attempt was made to decrease the diameter of fibers to the nano range by using different materials for their formation. Collected data of penetration for melt-blown fibrous media were described via experimentally verified realistic models for better simulation of the air filter’s performance. Additionally, the obtained results were compared with predictions of the classic filtration theory predominating in the literature on the subject.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · Coagulation and Flocculation Studies · Cyclone Separators and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Chemical and Process Engineering, Warsaw University of Technology

Faculty of Materials Science, Warsaw University of Technology

Funding

Cummins Filtration · National Centre for Research and Development

References (31)

Show source-provided references
1. 1) Payet, S. et al. (1992): Penetration and pressure-drop of a Hepa filter during loading with submicron liquid particles, Journal of Aerosol Science, Vol.23, pp.723–735.10.1016/0021-8502(92)90039-X ↗
2. 2) Brown, R. C. and Thorpe, A. (2001): Glass fiber filters with bimodal fiber size distribution, Powder Technology, Vol.118, pp.3–9.10.1016/S0032-5910(01)00288-1 ↗
3. 3) Huang, S. H. et al. (2007): Penetration of 4.5 nm to 10 μ m aerosol particles through fibrous filters, Journal of Aerosol Science, Vol.38, pp.719–727.10.1016/j.jaerosci.2007.05.007 ↗
4. 4) Rebaia, M. et al. (2010): Clogging modeling in pleated filters for gas filtration, Chemical Engineering Research and Design, Vol.88, pp.476–486.10.1016/j.cherd.2009.08.014 ↗
5. 5) Cesar, T. and Schroth, T. (2002): The Influence of Pleat Geometry on the Pressure Drop in Deep-pleated Cassette Filters, Filtration and Separation, November 2002, pp.48–54.10.1016/S0015-1882(02)80247-6 ↗
6. 6) Chazelet, S., Bemer, D. and Grippari, F. (2011): Effect of the test aerosol charge on the penetration through electret filter, Separation and Purification Technology, Vol.79, pp.352–356.10.1016/j.seppur.2011.03.021 ↗
7. 7) Wang, J., Kim, S. C. and Pui, D. Y. H. (2008): Figure of merit of composite filters with micrometer and nanometer fibers, Aerosol Science and Technology, Vol.42, pp.722–728.10.1080/02786820802249133 ↗
8. 8) Yun, K. M. et al. (2007): Nanoparticle filtration by electrospun polymer fibers, Chemical Engineering Science, Vol.62, pp.4751–4759.10.1016/j.ces.2007.06.007 ↗
9. 9) Barhate, R. S. and Ramakrishna, S. (2007): Nanofibrous filtering media: Filtration problems and solutions from tiny materials, Journal of Membrane Science, Vol.296, pp.1–8.10.1016/j.memsci.2007.03.038 ↗
10. 10) Barhate, R.S. et al. (2008): Fine chemical processing: The potential of nanofibres in filtration, Filtration and Separation, Vol.45, pp.32–35.10.1016/S0015-1882(08)70092-2 ↗
11. 11) Hung, C. and Leung, W. W. (2011): Filtration of nano-aerosol using nanofiber filter under low Peclet number and transitional flow regime, Separation and Purification Technology, Vol.79, pp.34–42.10.1016/j.seppur.2011.03.008 ↗
12. 12) Podgórski, A., Bałazy, A. and Gradoń, L. (2006): Application of nanofibers to improve the filtration efficiency of the most penetrating aerosol particles in fibrous filters, Chemical Engineering Science, Vol.61, pp.6804–6815.10.1016/j.ces.2006.07.022 ↗
13. 13) Chronakis, I. S. (2005): Novel nanocomposites and nanoceramics based on polymer nanofibers using electrospinning process-A review, Journal of Materials Processing Technology, Vol.167, pp.283–293.10.1016/j.jmatprotec.2005.06.053 ↗
14. 14) Karwa, A. and Tatarchuk, B. (2012): Aerosol filtration enhancement using carbon nanostructures synthesized within a sintered nickel microfibrous matrix, Separation and Purification Technology, Vol.87, pp.84–94.10.1016/j.seppur.2011.11.026 ↗
15. 15) Nguyen, T., Chung, O. and Park, J. (2011): Coaxial electrospun poly(lactic acid)/chitosan (core/shell) composite nanofibers and their antibacterial activity, Carbohydrate Polymers, Vol.86, pp.1799–1806.10.1016/j.carbpol.2011.07.014 ↗
16. 16) Leung, W. W., Hung, C. and Yuen, P. (2010): Effect of face velocity, nanofiber packing density and thickness on filtration performance of filters with nanofibers coated on a substrate, Separation and Purification Technology, Vol.71, pp.30–37.10.1016/j.seppur.2009.10.017 ↗
17. 17) Zhang, Q. et al. (2010): Improvement in nanofiber filtration by multiple thin layers of nanofiber mats, Journal of Aerosol Science, Vol.41, pp.230–236.10.1016/j.jaerosci.2009.10.001 ↗
18. 18) Graham, K. et al. (2002): “Polymeric nanofibers in air filtration applications”, Fifteenth Annual Technical Conference & Expo of the American Filtration & Separations Society, Galveston, Texas.
19. 19) Ciach, T. and Gradoń, L. (1996): Highly efficient filtering materials, Journal of Aerosol Science, Vol.27, pp.613–614.10.1016/0021-8502(96)00379-5 ↗
20. 20) Gradoń, L., Podgórski, A. and Bałazy, A. (2005): Filtration of nanoparticles in the nanofibrous filters, FILTECH 2005 Conference and Exhibition, Wiesbaden, Germany. Conference Proceedings, Vol.II, pp.178–183.
21. 21) Bresee, R. R. (2004): Influence of processing conditions on melt blown web structure: Part 1 – DCD, International Nonwovens Journal, Vol.13, pp.49–55.
22. 22) Ellison, C. J. et al. (2007): Melt blown nanofibers: Fiber diameter distributions and onset of fiber breakup, Polymer, Vol.48, pp.3306–3316.10.1016/j.polymer.2007.04.005 ↗
23. 23) Tan, D. H. et al. (2010): Meltblown fibers: Influence of viscosity and elasticity on diameter distribution, Journal of Non-Newtonian Fluid Mechanics, Vol.165, pp.892–900.10.1016/j.jnnfm.2010.04.012 ↗
24. 24) Kirsch, A. A. and Stechkina, I. B. (1973): Pressure drop and diffusional deposition of aerosol in polydisperse model filter, Journal of Colloid and Interface Science, Vol.43, pp.10–16.10.1016/0021-9797(73)90341-X ↗
25. 25) Dorman, R.G. (1966):“Filtration. In: Aerosol Science(C. N. Davies,Ed.)”, Academic Press,London,pp.195–222.
26. 26) Brown, R. C. (1993): “Air Filtration: An integrated approach to the theory and applications of fibrous filters”, Pergamon Press, Oxford.
27. 27) Podgórski, A. et al. (2011): Penetration of monodisperse, singly-charged nanoparticles through fibrous filters, Aerosol Science and Technology, Vol.45 (2), pp.196–214.10.1080/02786826.2010.530625 ↗
28. 28) Stechkina, I. B. andFuchs, N. A. (1966): Studies on fibrous aerosol filters – I. Calculation of diffusional deposition of aerosols in fibrous filters, Annals of Occupational Hygiene, Vol.9, pp.59–64.10.1093/annhyg/9.2.59 ↗
29. 29) Lee, K. W. and Liu, B. Y. H. (1982): Theoretical study of aerosol filtration by fibrous filter, Aerosol Science and Technology, Vol.1, pp.147–161.10.1080/02786828208958584 ↗
30. 30) Kirsch, A. A. and Stechkina, I. B. (1978): “The theory of aerosol filtration with fibrous filters. In:Shaw, D. T. (Ed.), Fundamentals of Aerosol Science”, Wiley, New York.
31. 31) Podgórski, A. (2009): Estimation of the upper limit of aerosol nanoparticles penetration through inhomogeneous fibrous filters, Journal of Nanoparticle Research, Vol.11, pp.197–207.10.1007/s11051-008-9472-2 ↗