journal article·2022-01-10Open access

Verification of Polyhedral DEM with Laboratory Grinding Mill Experiments

Alberto M. Puga, Nicolin Govender, Raj K. Rajamani

KONA Powder and Particle Journal· Volume 39· Issue 0

Abstract

The simulation of grinding mills with the discrete element method (DEM) has been advancing. First, it emerged as a method for studying charge motion with spherical balls and predicting the power draw of the mill. Subsequently, studies on liner wear, charge motion with ellipsoidal and polyhedral shaped particles simulated with three dimensional DEM followed. Further, the impact energy spectra computed in the DEM algorithm is leading to the development of models for the breakage of brittle particles in mills. The core elements in such simulations are the shape of particles in the mill charge and the power draw of the mill due to operating variables. To advance the field, we present a set of experimental data and the corresponding DEM validation results for a 90 × 13 cm mill. The DEM algorithm uses the volume-overlap method which is more realistic for multifaceted irregular particle collisions. Further, we use the scanned shape of the rock media and multifaceted spherical shape for the grinding media to represent as close as possible the actual charge in the mill. First, we present DEM validation for spherical grinding media-only experiments, rock-only experiments, and a mixture of spherical grinding media and rocks, as well as aluminum cubes only to represent the theme of particle shape. Finally, a discussion of the contact mechanics parameters in the four modes of experiments is given. Since the feed ore to plant scale mills can vary in shape, mill simulations with scanned shape of typical particles are the future for more accurate results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mineral Processing and Grinding · Granular flow and fluidized beds · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Material Science and Engineering, University of Utah, USA

Department of Mechanical Engineering, University of Johannesburg, South Africa

Research Center Pharmaceutical Engineering GmbH, Austria

References (29)

Show source-provided references
1. Cleary P.W., Recent advances in DEM modelling of tumbling mills, Minerals Engineering, 14 (2001) 1295–1319. DOI: 10.1016/s0892-6875(01)00145-510.1016/S0892-6875(01)00145-5 ↗
2. Cleary P.W., Morrisson R., Morrell S., Comparison of DEM and experiment for a scale model SAG mill, International Journal of Mineral Processing, 68 (2003) 129–165. DOI: 10.1016/s0301-7516(02)00065-010.1016/S0301-7516(02)00065-0 ↗
3. Cleary P.W., Predicting charge motion, power draw, segregation and wear in ball mills using discrete element methods, Minerals Engineering, 11 (1998) 1061–1080. DOI: 10.1016/s0892-6875(98)00093-410.1016/S0892-6875(98)00093-4 ↗
4. Cleary P.W., Sinnott M., Morrison R., Prediction of slurry transport in SAG mills using SPH fluid flow in a dynamic DEM based porous media, Minerals Engineering, 19 (2006) 1517–1527. DOI: 10.1016/j.mineng.2006.08.01810.1016/j.mineng.2006.08.018 ↗
5. Cleary P.W., Sinnott M.D., Morrison R.D., DEM prediction of particle flows in grinding processes, International Journal for Numerical Methods in Fluids, 58 (2008) 319–353. DOI: 10.1002/fld.172810.1002/fld.1728 ↗
6. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Geotechnique, (1979) 47–65. DOI: 10.1680/geot.1979.29.1.4710.1680/geot.1979.29.1.47 ↗
7. Delaney G.W., Cleary P.W., Sinnott M.D., Morrison R.D., Novel application of DEM to modelling comminution processes, IOP Conference Series: Materials Science and Engineering, 10 (2010) 012099. DOI: 10.1088/1757-899x/10/1/01209910.1088/1757-899X/10/1/012099 ↗
8. Djordjevic N., Morrison R., Loveday B., Cleary P., Modelling comminution patterns within a pilot scale AG/SAG mill, Minerals Engineering, 19 (2006) 1505–1516. DOI: 10.1016/j.mineng.2006.07.00310.1016/j.mineng.2006.07.003 ↗
9. EDEM, User Guide, DEM solution Ltd., Edinburgh, Scotland, UK Copyright © (2011). accessed 30.07.2021.
10. Govender N., Rajamani R.K., Kok S., Wilke D.N., Discrete element simulation of mill charge in 3D using the BLAZE-DEM GPU framework, Minerals Engineering, 79 (2015) 152–168. DOI: 10.1016/j.mineng.2015.05.01010.1016/j.mineng.2015.05.010 ↗
11. Govender N., Wilke D.N., Kok S., Blaze-DEMGPU: Modular high performance DEM framework for the GPU architecture, SoftwareX, 5 (2016) 62–66. DOI: 10.1016/j.softx.2016.04.00410.1016/j.softx.2016.04.004 ↗
12. Govender N., Rajamani R., Wilke D.N., Wu C.-Y., Khinast J., Glasser B.J., Effect of particle shape in grinding mills using a GPU based DEM code, Minerals Engineering, 129 (2018a) 71–84. DOI: 10.1016/j.mineng.2018.09.01910.1016/j.mineng.2018.09.019 ↗
13. Govender N., Wilke D.N., Pizette P., Abriak N.-E., A study of shape non-uniformity and poly-dispersity in hopper discharge of spherical and polyhedral particle systems using the Blaze-DEM GPU code, Applied Mathematics and Computation, 319 (2018b) 318–336. DOI: 10.1016/j.amc.2017.03.03710.1016/j.amc.2017.03.037 ↗
14. Govender N., Wilke D.N., Wu C.-Y., Tuzun U., Kureck H., A numerical investigation into the effect of angular particle shape on blast furnace burden topography and percolation using a GPU solved discrete element model, Chemical Engineering Science, 204 (2019) 9–26. DOI: 10.1016/j.ces.2019.03.07710.1016/j.ces.2019.03.077 ↗
15. Govender N., Wilke D.N., Wu C.-Y., Rajamani R., Khinast J., Glasser B.J., Large-scale GPU based DEM modeling of mixing using irregularly shaped particles, Advanced Powder Technology, 29 (2018c) 2476–2490. DOI: 10.1016/j.apt.2018.06.02810.1016/j.apt.2018.06.028 ↗
16. Hopkins M.A., Hibler III W.D., Flato G.M., On the numerical simulation of the sea ice ridging process, Journal of Geophysical Research: Oceans, 96 (1991) 4809–4820. DOI: 10.1029/90jc0237510.1029/90JC02375 ↗
17. Kiangi K., Potapov A., Moys M., DEM validation of media shape effects on the load behaviour and power in a dry pilot mill, Minerals Engineering, 46–47 (2013) 52–59. DOI: 10.1016/j.mineng.2013.03.02510.1016/j.mineng.2013.03.025 ↗
18. Latham J.-P., Munjiza A., Garcia X., Xiang J., Guises R., Three-dimensional particle shape acquisition and use of shape library for DEM and FEM/DEM simulation, Minerals Engineering, 21 (2008) 797–805. DOI: 10.1016/j.mineng.2008.05.01510.1016/j.mineng.2008.05.015 ↗
19. Mishra B.K., Rajamani R.K., Motion analysis in tumbling mills by the discrete element method, KONA Powder and Particle Journal, 8 (1990) 92–98. DOI: 10.14356/kona.199001610.14356/kona.1990016 ↗
20. Mishra B.K., Rajamani R.K., The discrete element method for the simulation of ball mills, Applied Mathematical Modelling, 16 (1992) 598–604. DOI: 10.1016/0307-904x(92)90035-210.1016/0307-904X(92)90035-2 ↗
21. Morrison R.D., Cleary P.W., Using DEM to model ore breakage within a pilot scale SAG mill, Minerals Engineering, 17 (2004) 1117–1124. DOI: 10.1016/j.mineng.2004.06.01610.1016/j.mineng.2004.06.016 ↗
22. Potapov A.V., Campbell C.S., A three-dimensional simulation of brittle solid fracture, International Journal of Modern Physics C, 07 (1996) 717–729. DOI: 10.1142/s012918319600059410.1142/S0129183196000594 ↗
23. Rajamani R.K., Mishra B.K., Venugopal R., Datta A., Discrete element analysis of tumbling mills, Powder Technology, 109 (2000) 105–112. DOI: 10.1016/s0032-5910(99)00230-210.1016/S0032-5910(99)00230-2 ↗
24. Rothenburg L., Bathurst R.J., Numerical simulation of idealized granular assemblies with plane elliptical particles, Computers and Geotechnics, 11 (1991) 315–329. DOI: 10.1016/0266-352x(91)90015-810.1016/0266-352X(91)90015-8 ↗
25. Tavares L.M., André F.P., Potapov A., Maliska C., Adapting a breakage model to discrete elements using polyhedral particles, Powder Technology, 362 (2020) 208–220. DOI: 10.1016/j.powtec.2019.12.00710.1016/j.powtec.2019.12.007 ↗
26. Tavares L.M., A review of advanced ball mill modelling, KONA Powder and Particle Journal, 34 (2017) 106–124. DOI: 10.14356/kona.201701510.14356/kona.2017015 ↗
27. Tavares L.M., de Carvalho R.M., Modeling breakage rates of coarse particles in ball mills, Minerals Engineering, 22 (2009) 650–659. DOI: 10.1016/j.mineng.2009.03.01510.1016/j.mineng.2009.03.015 ↗
28. Venugopal R., Rajamani R.K., 3D simulation of charge motion in tumbling mills by the discrete element method, Powder Technology, 115 (2001) 157–166. DOI: 10.1016/s0032-5910(00)00333-810.1016/S0032-5910(00)00333-8 ↗
29. Xu L.,Luo K., Zhao Y., Fan J., Cen K., Influence of particle shape on liner wear in tumbling mills: a DEM study, Powder Technology, 350 (2019) 26–35. DOI: 10.1016/j.powtec.2019.03.03310.1016/j.powtec.2019.03.033 ↗