journal article·2025-01-10Open access

The Effect of Process Conditions on Powder Flow Properties for Slow Flow Regimes

Sina Zinatlou Ajabshir, Diego Barletta, Massimo Poletto

KONA Powder and Particle Journal· Volume 42· Issue 0

Abstract

In several industrial units and applications, particulate solids are exposed to peculiar process conditions that significantly affect their flowability. Accurate characterisation and prediction of these effects are crucial for proper design and operation control of the processes. Liquid content, environmental humidity, and temperature can directly modify the type and magnitude of the interparticle forces and, thus, the cohesive behaviour at the bulk scale. This paper reports a critical review of experimental and modelling studies regarding the quantitative assessment of the effect of powder liquid content, environmental gas humidity and temperature on the mechanics of dense particle assemblies. Particular attention is paid to novel setups and experimental protocols that aim to go beyond the limits of standard and commercial instruments. A multiscale approach is followed from the particle level to the bulk level.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Particle Dynamics in Fluid Flows · Heat and Mass Transfer in Porous Media

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dipartimento di Ingegneria Industriale, Università degli Studi di Salerno, Italy

Funding

Horizon 2020

References (100+)

Show source-provided references
1. Althaus T.O., Windhab E.J., Characterization of wet powder flowability by shear cell measurements and compaction curves, Powder Technology, 215–216 (2012) 59–65. https://doi.org/10.1016/j.powtec.2011.09.00710.1016/j.powtec.2011.09.007 ↗
2. Althaus T.O., Windhab E.J., Scheuble N., Effect of pendular liquid bridges on the flow behavior of wet powders, Powder Technology, 217 (2012) 599–606. https://doi.org/10.1016/j.powtec.2011.11.02610.1016/j.powtec.2011.11.026 ↗
3. Badetti M., Fall A., Hautemayou D., Chevoir F., Aimedieu P., Rodts S., Roux J.-N., Rheology and microstructure of unsaturated wet granular materials: experiments and simulations, Journal of Rheology, 62 (2018) 1175–1186. https://doi.org/10.1122/1.502697910.1122/1.5026979 ↗
4. Barletta D., Poletto M., Santomaso A.C., Chapter 4. bulk powder flow characterisation techniques, in: Hare C., Hassanpour A., Pasha M. (Eds.), Powder Flow, Royal Society of Chemistry, Cambridge, UK, 2019, pp. 64–146, ISBN: 978-1-78801-224-9. https://doi.org/10.1039/9781788016100-0006410.1039/9781788016100-00064 ↗
5. Bocquet L., Charlaix E., Ciliberto S., Crassous J., Moisture-induced ageing in granular media and the kinetics of capillary condensation, Nature, 396 (1998) 735–737. https://doi.org/10.1038/2549210.1038/25492 ↗
6. Butt H.J., Capillary forces: influence of roughness and heterogeneity, Langmuir, 24 (2008) 4715–4721. https://doi.org/10.1021/la703640f10.1021/la703640f ↗
7. Butt H.-J., Kappl M., Normal capillary forces, Advances in Colloid and Interface Science, 146 (2009) 48–60. https://doi.org/10.1016/j.cis.2008.10.00210.1016/j.cis.2008.10.002 ↗
8. Capece M., Ho R., Strong J., Gao P., Prediction of powder flow performance using a multi-component granular Bond number, Powder Technology, 286 (2015) 561–571. https://doi.org/10.1016/j.powtec.2015.08.03110.1016/j.powtec.2015.08.031 ↗
9. Capece M., Silva K.R., Sunkara D., Strong J., Gao P., On the relationship of inter-particle cohesiveness and bulk powder behavior: flowability of pharmaceutical powders, International Journal of Pharmaceutics, 511 (2016) 178–189. https://doi.org/10.1016/j.ijpharm.2016.06.05910.1016/j.ijpharm.2016.06.059 ↗
10. Castellanos A., The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders, Advances in Physics, 54 (2005) 263–376. https://doi.org/10.1080/1746139050040265710.1080/17461390500402657 ↗
11. Chen W., Roberts A.W., A modified flowability classification model for moist and cohesive bulk solids, Powder Technology, 325 (2018) 639–650. https://doi.org/10.1016/j.powtec.2017.11.05410.1016/j.powtec.2017.11.054 ↗
12. Chirone R., Barletta D., Lettieri P., Poletto M., Bulk flow properties of sieved samples of a ceramic powder at ambient and high temperature, Powder Technology, 288 (2016) 379–387. https://doi.org/10.1016/j.powtec.2015.11.04010.1016/j.powtec.2015.11.040 ↗
13. Chirone R., Barletta D., Poletto M., Lettieri P., Detection and estimation of capillary interparticle forces in the material of a fluidized bed reactor at high temperature by powder flow characterization, Powder Technology, 330 (2018) 371–385. https://doi.org/10.1016/j.powtec.2018.02.02410.1016/j.powtec.2018.02.024 ↗
14. Chirone R., Poletto M., Barletta D., Lettieri P., The effect of temperature on the minimum fluidization conditions of industrial cohesive particles, Powder Technology, 362 (2020) 307–322. https://doi.org/10.1016/j.powtec.2019.11.10210.1016/j.powtec.2019.11.102 ↗
15. Coelho M.C., Harnby N., Moisture bonding in powders, Powder Technology, 20 (1978a) 201–205. https://doi.org/10.1016/0032-5910(78)80049-710.1016/0032-5910(78)80049-7 ↗
16. Coelho M.C., Harnby N., The effect of humidity on the form of water retention in a powder, Powder Technology, 20 (1978b) 197–200. https://doi.org/10.1016/0032-5910(78)80048-510.1016/0032-5910(78)80048-5 ↗
17. Cordova L., Bor T., de Smit M., Campos M., Tinga T., Measuring the spreadability of pre-treated and moisturized powders for laser powder bed fusion, Additive Manufacturing, 32 (2020) 101082. https://doi.org/10.1016/j.addma.2020.10108210.1016/j.addma.2020.101082 ↗
18. Coughlin R., Elbirli B., Vergara-Edwards L., Interparticle force conferred by capillary-condensed liquid at contact points, Journal of Colloid and Interface Science, 87 (1982) 18–30. https://doi.org/10.1016/0021-9797(82)90368-X10.1016/0021-9797(82)90368-X ↗
19. Durán-Olivencia F.J., Ebri J.M.P., Espín M.J., Valverde J.M., The cohesive behavior of granular solids at high temperature in solar energy storage, Energy Conversion and Management, 240 (2021) 114217. https://doi.org/10.1016/j.enconman.2021.11421710.1016/j.enconman.2021.114217 ↗
20. Durán-Olivencia F.J., Espín M.J., Valverde J.M., Cross effect between temperature and consolidation on the flow behavior of granular materials in thermal energy storage systems, Powder Technology, 363 (2020) 135–145. https://doi.org/10.1016/j.powtec.2019.11.12510.1016/j.powtec.2019.11.125 ↗
21. Durán-Olivencia F.J., Gannoun R., Pérez A.T., Valverde J.M., Efficacy of nanosilica coatings in calcium looping reactors, Industrial & Engineering Chemistry Research, 62 (2023) 1373–1389. https://doi.org/10.1021/acs.iecr.2c0349010.1021/acs.iecr.2c03490 ↗
22. Eaves T., Jones T.M., Effect of moisture on tensile strength of bulk solids i: sodium chloride and effect of particle size, Journal of Pharmaceutical Sciences, 61 (1972a) 256–261. https://doi.org/10.1002/jps.260061022610.1002/jps.2600610226 ↗
23. Eaves T., Jones T.M., Effect of moisture on tensile strength of bulk solids ii: fine particle-size materials with varying inherent coherence, Journal of Pharmaceutical Sciences, 61 (1972b) 342–348. https://doi.org/10.1002/jps.260061030410.1002/jps.2600610304 ↗
24. Elbirli B., Vergara-Edwards L., Coughlin R.W., Interparticle force conferred by capillary-condensed liquid at contact points, Journal of Colloid and Interface Science, 87 (1982) 31–45. https://doi.org/10.1016/0021-9797(82)90369-110.1016/0021-9797(82)90369-1 ↗
25. Emery E., Oliver J., Pugsley T., Sharma J., Zhou J., Flowability of moist pharmaceutical powders, Powder Technology, 189 (2009) 409–415. https://doi.org/10.1016/j.powtec.2008.06.01710.1016/j.powtec.2008.06.017 ↗
26. Espin M.J., Duran-Olivencia F.J., Valverde J.M., Role of particle size on the cohesive behavior of limestone powders at high temperature, Chemical Engineering Journal, 391 (2020) 123520. https://doi.org/10.1016/j.cej.2019.12352010.1016/j.cej.2019.123520 ↗
27. Francia V., Ait Ali Yahia L., Ocone R., Ozel A., From quasi-static to intermediate regimes in shear cell devices: theory and characterisation, KONA Powder and Particle Journal, 38 (2021) 3–25. https://doi.org/10.14356/kona.202101810.14356/kona.2021018 ↗
28. Gannoun R., Ebrí J.M.P., Pérez A.T., Valverde J.M., The Sevilla powder tester: a tool for measuring the flow properties of cohesive powders at high temperatures, KONA Powder and Particle Journal, 39 (2022) 29–44. https://doi.org/10.14356/kona.202200810.14356/kona.2022008 ↗
29. Ghadiri M., Pasha Mehrdad, Nan W., Hare C., Vivacqua V., Zafar U., Nezamabadi S., Lopez A., Pasha Massih, Nadimi S., Cohesive powder flow: trends and challenges in characterisation and analysis, KONA Powder and Particle Journal, 37 (2020) 3–18. https://doi.org/10.14356/kona.202001810.14356/kona.2020018 ↗
30. Groen J.C., Kooijman W., van Belzen D., Meesters G.M.H., Schütz D., Aschl T., Verolme P., Real-time in-situ rheological assessment of sticky point temperature and humidity of powdered products, KONA Powder and Particle Journal, 37 (2020) 176–186. https://doi.org/10.14356/kona.202000610.14356/kona.2020006 ↗
31. Gyulai A., Bauer W., Ehrenberg H., Dry electrode manufacturing in a calender: the role of powder premixing for electrode quality and electrochemical performance, ACS Applied Energy Materials, 6 (2023) 5122–5134. https://doi.org/10.1021/acsaem.2c0375510.1021/acsaem.2c03755 ↗
32. Haider C.I., Althaus T., Niederreiter G., Hounslow M.J., Palzer S., Salman A.D., A micromanipulation particle tester for agglomeration contact mechanism studies in a controlled environment, Measurement Science and Technology, 23 (2012) 105904. https://doi.org/10.1088/0957-0233/23/10/10590410.1088/0957-0233/23/10/105904 ↗
33. Harnby N., Hawkins A.E., Vandame D., The use of bulk density determination as a means of typifying the flow characteristics of loosely compacted powders under conditions of variable relative humidity, Chemical Engineering Science, 42 (1987) 879–888. https://doi.org/10.1016/0009-2509(87)80046-510.1016/0009-2509(87)80046-5 ↗
34. Horiguchi G., Fujii R., Yamauchi Y., Okabe H., Tsukada M., Okada Y., Kamiya H., Toward stable operation of coal combustion plants: the use of alumina nanoparticles to prevent adhesion of fly ash, Energy & Fuels, 32 (2018) 13015–13020. https://doi.org/10.1021/acs.energyfuels.8b0304310.1021/acs.energyfuels.8b03043 ↗
35. Horiguchi G., Fujimoto T., Yoshinaga K., Okada Y., Kamiya H., Particle adhesion induced by calcium carbonate nanoparticles at 900 °C, Powder Technology, 405 (2022) 117514. https://doi.org/10.1016/j.powtec.2022.11751410.1016/j.powtec.2022.117514 ↗
36. Horiguchi G., Ito M., Ito A., Kamiya H., Okada Y., Role of phosphorus and iron in particle adhesiveness at high temperatures using synthetic ashes, ACS Sustainable Chemistry & Engineering, 9 (2021a) 15315–15321. https://doi.org/10.1021/acssuschemeng.1c0567610.1021/acssuschemeng.1c05676 ↗
37. Horiguchi G., Kamiya H., García-Triñanes P., Evaluation and control of the adhesiveness of cohesive calcium carbonate particles at high temperatures, Advanced Powder Technology, 32 (2021b) 283–289. https://doi.org/10.1016/j.apt.2020.12.00910.1016/j.apt.2020.12.009 ↗
38. Hurley J.P., Dockter B.A., Factors affecting the tensile strength of hot-gas filter dust cakes, Advanced Powder Technology, 14 (2003) 695–705. https://doi.org/10.1163/1568552036073198110.1163/15685520360731981 ↗
39. Hurley J.P., Mukherjee B., Mann M.D., Assessment of filter dust characteristics that cause filter failure during hot-gas filtration, Energy & Fuels, 20 (2006) 1629–1638. https://doi.org/10.1021/ef050303k10.1021/ef050303k ↗
40. Israelachvili J.N., Intermolecular and Surface Forces, third edition, Academic Press, 2011, ISBN: 978-0-12-375182-9. https://doi.org/10.1016/C2009-0-21560-110.1016/C2009-0-21560-1 ↗
41. Jallo L.J., Ghoroi C., Gurumurthy L., Patel U., Davé R.N., Improvement of flow and bulk density of pharmaceutical powders using surface modification, International Journal of Pharmaceutics, 423 (2012) 213–225. https://doi.org/10.1016/j.ijpharm.2011.12.01210.1016/j.ijpharm.2011.12.012 ↗
42. Jenike A.W., Storage and flow of solids, Bulletin No. 123, Bulletin of the University of Utah, 53 (1964) 56–56. accessed28122023.
43. Johanson K., Rabinovich Y., Moudgil B., Breece K., Taylor H., Relationship between particle scale capillary forces and bulk unconfined yield strength, Powder Technology, 138 (2003) 13–17. https://doi.org/10.1016/j.powtec.2003.08.03710.1016/j.powtec.2003.08.037 ↗
44. Kamiya H., Kimura A., Tsukada M., Naito M., Analysis of the high-temperature cohesion behavior of ash particles using pure silica powders coated with alkali metals, Energy & Fuels, 16 (2002a) 457–461. https://doi.org/10.1021/ef010208l10.1021/ef010208l ↗
45. Kamiya H., Kimura A., Yokoyama T., Naito M., Jimbo G., Development of a split-type tensile-strength tester and analysis of mechanism of increase of adhesion behavior of inorganic fine powder bed at high-temperature conditions, Powder Technology, 127 (2002b) 239–245. https://doi.org/10.1016/S0032-5910(02)00117-110.1016/S0032-5910(02)00117-1 ↗
46. Kamyabi M., Sotudeh-Gharebagh R., Zarghami R., Saleh K., Principles of viscous sintering in amorphous powders: a critical review, Chemical Engineering Research and Design, 125 (2017) 328–347. https://doi.org/10.1016/j.cherd.2017.06.00910.1016/j.cherd.2017.06.009 ↗
47. Kanaoka C., Hata M., Makino H., Measurement of adhesive force of coal flyash particles at high temperatures and different gas compositions, Powder Technology, 118 (2001) 107–112. https://doi.org/10.1016/S0032-5910(01)00300-x10.1016/S0032-5910(01)00300-X ↗
48. Karde V., Dixit D., Ghoroi C., Adhesion force approximation at varying consolidation stresses for fine powder under humid conditions, Advanced Powder Technology, 28 (2017) 346–355. https://doi.org/10.1016/j.apt.2016.09.02310.1016/j.apt.2016.09.023 ↗
49. Karde V., Ghoroi C., Fine powder flow under humid environmental conditions from the perspective of surface energy, International Journal of Pharmaceutics, 485 (2015) 192–201. https://doi.org/10.1016/j.ijpharm.2015.03.02110.1016/j.ijpharm.2015.03.021 ↗
50. Kartik S., Balsora H.K., Sharma M., Saptoro A., Jain R.K., Joshi J.B., Sharma A., Valorization of plastic wastes for production of fuels and value-added chemicals through pyrolysis – a review, Thermal Science and Engineering Progress, 32 (2022) 101316. https://doi.org/10.1016/j.tsep.2022.10131610.1016/j.tsep.2022.101316 ↗
51. Kohonen M.M., Geromichalos D., Scheel M., Schier C., Herminghaus S., On capillary bridges in wet granular materials, Physica A: Statistical Mechanics and its Applications, 339 (2004) 7–15. https://doi.org/10.1016/j.physa.2004.03.04710.1016/j.physa.2004.03.047 ↗
52. LaMarche C.Q., Miller A.W., Liu P., Hrenya C.M., Linking micro-scale predictions of capillary forces to macro-scale fluidization experiments in humid environments, AIChE Journal, 62 (2016) 3585–3597. https://doi.org/10.1002/aic.1528110.1002/aic.15281 ↗
53. Landi G., Barletta D., Lettieri P., Poletto M., Flow properties of moisturized powders in a Couette fluidized bed rheometer, International Journal of Chemical Reactor Engineering, 10 (2012) A28. https://doi.org/10.1515/1542-6580.299310.1515/1542-6580.2993 ↗
54. Landi G., Barletta D., Poletto M., Modelling and experiments on the effect of air humidity on the flow properties of glass powders, Powder Technology, 207 (2011) 437–443. https://doi.org/10.1016/j.powtec.2010.11.03310.1016/j.powtec.2010.11.033 ↗
55. Liu Y., Lu H., Barletta D., Poletto M., Guo X., Gong X., Jin Y., Bulk flow properties of fly ashes at ambient and high temperature, Particuology, 38 (2018) 113–125. https://doi.org/10.1016/j.partic.2017.04.01310.1016/j.partic.2017.04.013 ↗
56. Liu Z., Jin J., Zheng L., Zhang R., Wang Y., He X., Kong S., Zhai Z., Controlling the ash adhesion strength of Zhundong high-calcium coal by additives at high temperature, Fuel, 323 (2022) 124342. https://doi.org/10.1016/j.fuel.2022.12434210.1016/j.fuel.2022.124342 ↗
57. Louati H., Oulahna D., de Ryck A., Effect of the particle size and the liquid content on the shear behaviour of wet granular material, Powder Technology, 315 (2017) 398–409. https://doi.org/10.1016/j.powtec.2017.04.03010.1016/j.powtec.2017.04.030 ↗
58. Lu H., Guo X., Jin Y., Gong X., Effect of moisture on flowability of pulverized coal, Chemical Engineering Research and Design, 133 (2018) 326–334. https://doi.org/10.1016/j.cherd.2018.03.02310.1016/j.cherd.2018.03.023 ↗
59. Lu X.-Y., Chen L., Wu C.-Y., Chan H.-K., Freeman T., The effects of relative humidity on the flowability and dispersion performance of lactose mixtures, Materials, 10 (2017) 592. https://doi.org/10.3390/ma1006059210.3390/ma10060592 ↗
60. Luan C., You C., A novel experimental investigation into sintered neck tensile strength of ash at high temperatures, Powder Technology, 269 (2015) 379–384. https://doi.org/10.1016/j.powtec.2014.09.03110.1016/j.powtec.2014.09.031 ↗
61. Lumay G., Traina K., Boschini F., Delaval V., Rescaglio A., Cloots R., Vandewalle N., Effect of relative air humidity on the flowability of lactose powders, Journal of Drug Delivery Science and Technology, 35 (2016) 207–212. https://doi.org/10.1016/j.jddst.2016.04.00710.1016/j.jddst.2016.04.007 ↗
62. Maarup C., Hjuler K., Dam-Johansen K., High temperature cement raw meal flowability, Powder Technology, 253 (2014) 686–690. https://doi.org/10.1016/j.powtec.2013.12.04010.1016/j.powtec.2013.12.040 ↗
63. Macrì D., Barletta D., Lettieri P., Poletto M., Experimental and theoretical analysis of TiO2 powders flow properties at ambient and high temperatures, Chemical Engineering Science, 167 (2017a) 172–190. https://doi.org/10.1016/j.ces.2017.03.05710.1016/j.ces.2017.03.057 ↗
64. Macrì D., Poletto M., Barletta D., Lettieri P., An investigation of the flow properties of rutile particles: fluidization behaviour linked with shearing studies, Powder Technology, 374 (2020) 544–559. https://doi.org/10.1016/j.powtec.2020.07.08210.1016/j.powtec.2020.07.082 ↗
65. Macrì D., Poletto M., Barletta D., Sutcliffe S., Lettieri P., Analysis of industrial reactive powders flow properties at high temperature, Powder Technology, 316 (2017b) 131–138. https://doi.org/10.1016/j.powtec.2016.10.06410.1016/j.powtec.2016.10.064 ↗
66. Marchetti L., Mellin P., Neil Hulme C., Negative impact of humidity on the flowability of steel powders, Particulate Science and Technology, 40 (2022) 722–736. https://doi.org/10.1080/02726351.2021.199509110.1080/02726351.2021.1995091 ↗
67. Molerus O., Theory of yield of cohesive powders, Powder Technology, 12 (1975) 259–275. https://doi.org/10.1016/0032-5910(75)85025-X10.1016/0032-5910(75)85025-X ↗
68. Mort P., Michaels J.N., Behringer R.P., Campbell C.S., Kondic L., Kheiripour Langroudi M., Shattuck M., Tang J., Tardos G.I., Wassgren C., Dense granular flow—a collaborative study, Powder Technology, 284 (2015) 571–584. https://doi.org/10.1016/J.POWTEC.2015.06.00610.1016/j.powtec.2015.06.006 ↗
69. Orband J.L.R., Geldart D., Direct measurement of powder cohesion using a torsional device, Powder Technology, 92 (1997) 25–33. https://doi.org/10.1016/S0032-5910(97)03212-910.1016/S0032-5910(97)03212-9 ↗
70. Pagliai P., Simons S.J.R., Rhodes D., Towards a fundamental understanding of defluidisation at high temperatures: a micro-mechanistic approach, Powder Technology, 148 (2004) 106–112. https://doi.org/10.1016/j.powtec.2004.09.00410.1016/j.powtec.2004.09.004 ↗
71. Pierrat P., Agrawal D.K., Caram H.S., Effect of moisture on the yield locus of granular materials: theory of shift, Powder Technology, 99 (1998) 220–227. https://doi.org/10.1016/S0032-5910(98)00111-910.1016/S0032-5910(98)00111-9 ↗
72. Pierrat P., Caram H.S., Tensile strength of wet granula materials, Powder Technology, 91 (1997b) 83–93. https://doi.org/10.1016/S0032-5910(96)03179-810.1016/S0032-5910(96)03179-8 ↗
73. Pietsch W., Hoffman E., Rumpf H., Tensile strength of moist agglomerates, Industrial & Engineering Chemistry Product Research & Development, 8 (1969) 58–62. https://doi.org/10.1021/i360029a00910.1021/i360029a009 ↗
74. Pietsch W., Rumpf H., Haftkraft, kapillardruck, flüssigkeitsvolumen und grenzwinkel einer flüssigkeitsbrücke zwischen zwei kugeln, Chemie Ingenieur Technik, 39 (1967) 885–893. https://doi.org/10.1002/cite.33039150210.1002/cite.330391502 ↗
75. Pietsch W.B., Tensile strength of granular materials, Nature, 217 (1968) 736–737. https://doi.org/10.1038/217736a010.1038/217736a0 ↗
76. Price R., Young P.M., Edge S., Staniforth J.N., The influence of relative humidity on particulate interactions in carrier-based dry powder inhaler formulations, International Journal of Pharmaceutics, 246 (2002) 47–59. https://doi.org/10.1016/S0378-5173(02)00359-910.1016/S0378-5173(02)00359-9 ↗
77. Rabinovich Y.I., Adler J.J., Ata A., Singh R.K., Moudgil B.M., Adhesion between nanoscale rough surfaces: ii. measurement and comparison with theory, Journal of Colloid and Interface Science, 232 (2000a) 17–24. https://doi.org/10.1006/jcis.2000.716810.1006/jcis.2000.7168 ↗
78. Rabinovich Y.I., Adler J.J., Ata A., Singh R.K., Moudgil B.M., Adhesion between nanoscale rough surfaces: i. role of asperity geometry, Journal of Colloid and Interface Science, 232 (2000b) 10–16. https://doi.org/10.1006/jcis.2000.716710.1006/jcis.2000.7167 ↗
79. Rabinovich Y.I., Adler J.J., Esayanur M.S., Ata A., Singh R.K., Moudgil B.M., Capillary forces between surfaces with nanoscale roughness, Advances in Colloid and Interface Science, 96 (2002) 213–230. https://doi.org/10.1016/S0001-8686(01)00082-310.1016/S0001-8686(01)00082-3 ↗
80. Richefeu V., El Youssoufi M.S., Radjaï F., Shear strength properties of wet granular materials, Physical Review E, 73 (2006) 051304. https://doi.org/10.1103/PhysRevE.73.05130410.1103/PhysRevE.73.051304 ↗
81. Ripp M., Ripperger S., Influence of temperature on the flow properties of bulk solids, Chemical Engineering Science, 65 (2010) 4007–4013. https://doi.org/10.1016/j.ces.2010.03.04610.1016/j.ces.2010.03.046 ↗
82. Ruggi D., Barrès C., Charmeau J.-Y., Fulchiron R., Barletta D., Poletto M., A quantitative approach to assess high temperature flow properties of a PA 12 powder for laser sintering, Additive Manufacturing, 33 (2020a) 101143. https://doi.org/10.1016/j.addma.2020.10114310.1016/j.addma.2020.101143 ↗
83. Ruggi D., Lupo M., Sofia D., Barrès C., Barletta D., Poletto M., Flow properties of polymeric powders for selective laser sintering, Powder Technology, 370 (2020b) 288–297. https://doi.org/10.1016/j.powtec.2020.05.06910.1016/j.powtec.2020.05.069 ↗
84. Rumpf H., The strength of granules and agglomerates, in: Knepper W.A. (ed.), Agglomeration, Wiley, New York, 1962, pp. 379–418.
85. Salehi H., Karde V., Hajmohammadi H., Dissanayake S., Larsson S.H., Heng J.Y.Y., Bradley M., Understanding flow properties of mannitol powder at a range of temperature and humidity, International Journal of Pharmaceutics, 596 (2021) 120244. https://doi.org/10.1016/j.ijpharm.2021.12024410.1016/j.ijpharm.2021.120244 ↗
86. Schubert H., Capillary forces - modeling and application in particulate technology, Powder Technology, 37 (1984) 105–116. https://doi.org/10.1016/0032-5910(84)80010-810.1016/0032-5910(84)80010-8 ↗
87. Schubert H., Herrmann W., Rumpf H., Deformation behaviour of agglomerates under tensile stress, Powder Technology, 11 (1975) 121–131. https://doi.org/10.1016/0032-5910(75)80037-410.1016/0032-5910(75)80037-4 ↗
88. Seville J., Tüzün U., Clift R., Processing of Particulate Solids, Springer Netherlands, Dordrecht, 1997, ISBN: 9780751403763. https://doi.org/10.1007/978-94-009-1459-910.1007/978-94-009-1459-9 ↗
89. Shao Y., Aoki N., Tong Z., Zhong W., Yu A., Kamiya H., Numerical and experimental study of tensile stresses of biomass combustion ash with temperature variation, Advanced Powder Technology, 27 (2016) 215–222. https://doi.org/10.1016/j.apt.2015.12.00710.1016/j.apt.2015.12.007 ↗
90. Smith D.H., Haddad G.J., Ferer M., Shear Strengths of heated and unheated mixtures of MgSO4 and CaSO4 powders. Model pressurized fluidized bed combustion filter cakes, Energy & Fuels, 11 (1997) 1006–1011. https://doi.org/10.1021/ef970037d10.1021/ef970037d ↗
91. Sofia D., Chirone R., Lettieri P., Barletta D., Poletto M., Selective laser sintering of ceramic powders with bimodal particle size distribution, Chemical Engineering Research and Design, 136 (2018) 536–547. https://doi.org/10.1016/j.cherd.2018.06.00810.1016/j.cherd.2018.06.008 ↗
92. Stevens N., Tedeschi S., Powers K., Moudgil B., El-Shall H., Controlling unconfined yield strength in a humid environment through surface modification of powders, Powder Technology, 191 (2009) 170–175. https://doi.org/10.1016/j.powtec.2008.10.00110.1016/j.powtec.2008.10.001 ↗
93. Teunou E., Fitzpatrick J., Effect of relative humidity and temperature on food powder flowability, Journal of Food Engineering, 42 (1999) 109–116. https://doi.org/10.1016/S0260-8774(99)00087-410.1016/S0260-8774(99)00087-4 ↗
94. Tomas J., Particle adhesion fundamentals and bulk powder consolidation, KONA Powder and Particle Journal, 18 (2000) 157–169. https://doi.org/10.14356/kona.200002210.14356/kona.2000022 ↗
95. Tomas J., Mechanics of nanoparticle adhesion—A continuum approach, in: Mittal K.L. (ed.), Particles on Surfaces: Detection, Adhesion and Removal, Volume 8, 1st edition, CRC Press, 2003, pp. 183–229, ISBN: 9780429088131. https://doi.org/10.1201/978904740333310.1201/9789047403333 ↗
96. Tomas J., Fundamentals of cohesive powder consolidation and flow, Granular Matter, 6 (2004) 75–86. https://doi.org/10.1007/s10035-004-0167-910.1007/s10035-004-0167-9 ↗
97. Tomas J., Schubert H., Fliessverhalten von feuchten Schüttgütern, Aufbereitungs-Technik, 26 (1985) 399–404.
98. Tomasetta I., Barletta D., Poletto M., The high temperature annular shear cell: a modified ring shear tester to measure the flow properties of powders at high temperature, Advanced Powder Technology, 24 (2013) 609–617. https://doi.org/10.1016/j.apt.2012.11.00710.1016/j.apt.2012.11.007 ↗
99. Tomasetta I., Barletta D., Poletto M., Correlation of powder flow properties to interparticle interactions at ambient and high temperatures, Particuology, 12 (2014) 90–99. https://doi.org/10.1016/j.partic.2013.02.00210.1016/j.partic.2013.02.002 ↗
100. Tregambi C., Troiano M., Montagnaro F., Solimene R., Salatino P., Fluidized beds for concentrated solar thermal technologies—a review, Frontiers in Energy Research, 9 (2021). https://doi.org/10.3389/fenrg.2021.61842110.3389/fenrg.2021.618421 ↗