Artificial Intelligence and Evolutionary Approaches in Particle Technology
Source abstract
Abstract
Since the early 2010s, after decades of premature excitement and disillusionment, the field of artificial intelligence (AI) is experiencing exponential growth, with massive real-world applications and high adoption rates both in daily life and in industry. In particle technology, there are already many examples of successful AI applications, for predictive modeling, process control and optimization, fault recognition, even for mechanistic modeling. However, in comparison to its still untapped potential and to other industries, further expansion in adoption rates and, consequently, gains in productivity, efficiency, and cost reduction are still possible. This review article is intended to introduce AI and its application scenarios and provide an overview and examples of current use cases of different aspects and unit operations in particle technology, such as grinding, extrusion, synthesis, characterization, or scale up. In addition, hybrid modeling approaches are presented with examples of the intelligent combination of different methods to reduce data requirements and achieve beneficial synergies. Finally, an outlook for future opportunities is given, depicting promising approaches, currently being in the conception or implementation phase.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mineral Processing and Grinding · Granular flow and fluidized beds · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Particle Technology (iPAT), Technische Universität Braunschweig, Germany
Funding
Deutsche Forschungsgemeinschaft
References (99)
Show source-provided references
1. Ashraf C., Joshi N., Beck D.A.C., Pfaendtner J., Data science in chemical engineering: applications to molecular science, Annual Review of Chemical and Biomolecular Engineering, 12 (2021) 15–37. DOI:10.1146/annurev-chembioeng-101220-10223210.1146/annurev-chembioeng-101220-102232 ↗
2. Astray G., Mejuto J.C., Approach of different properties of alkylammonium surfactants using artificial intelligence and response surface methodology, Tenside Surfactants Detergents, 54 (2017) 132–140. DOI:10.3139/113.110483
3. Bajimaya S.M., Park S., Wang G-N, Predicting extrusion process parameters using neural networks, International Journal of Mechanical and Mechatronics Engineering, 1 (2007) 644–648. DOI:10.5281/zenodo.1061615
4. Beinert S., Fragnière G., Schilde C., Kwade A., Multiscale simulation of fine grinding and dispersing processes: stressing probability, stressing energy and resultant breakage rate, Advanced Powder Technology, 29 (2018) 573–583. DOI:10.1016/j.apt.2017.11.03410.1016/j.apt.2017.11.034 ↗
5. Böttcher A.-C., Thon C., Fragnière G., Chagas A., Schilde C., Kwade A., Rigidly-mounted roll mill as breakage tester for characterizing fine particle breakage, Powder Technology, 383 (2021) 554–563. DOI:10.1016/j.powtec.2021.01.05510.1016/j.powtec.2021.01.055 ↗
6. Bowler A.L., Bakalis S., Watson N.J., Monitoring mixing processes using ultrasonic sensors and machine learning, Sensors, 20 (2020) 1813. DOI:10.3390/s2007181310.3390/s20071813 ↗
7. Calzolari G., Liu W., Deep learning to replace, improve, or aid CFD analysis in built environment applications: a review, Building and Environment, 206 (2021) 108315. DOI:10.1016/j.buildenv.2021.10831510.1016/j.buildenv.2021.108315 ↗
8. Chen M., Dixon D.A., Machine-learning approach for the development of structure–energy relationships of ZnO nanoparticles, The Journal of Physical Chemistry C, 122 (2018) 18621–18639. DOI:10.1021/acs.jpcc.8b0166710.1021/acs.jpcc.8b01667 ↗
9. Chen W., Fuge M., Synthesizing designs with interpart dependencies using hierarchical generative adversarial networks, Journal of Mechanical Design, 141 (2019) 111403. DOI:10.1115/1.404407610.1115/1.4044076 ↗
10. Dai W., Liu Q., Chai T., Particle size estimate of grinding processes using random vector functional link networks with improved robustness, Neurocomputing, 169 (2015) 361–372. DOI:10.1016/j.neucom.2014.08.09810.1016/j.neucom.2014.08.098 ↗
11. Demir-Kavuk O., Kamada M., Akutsu T., Knapp E-W, Prediction using step-wise L1, L2 regularization and feature selection for small data sets with large number of features, BMC Bioinformatics, 12 (2011) 412. DOI:10.1186/1471-2105-12-41210.1186/1471-2105-12-412 ↗
12. Deshpande S., Purwar A., Computational creativity via assisted variational synthesis of mechanisms using deep generative models, Journal of Mechanical Design, 141 (2019) 121402. DOI:10.1115/1.404439610.1115/1.4044396 ↗
13. El-Emam M.A., Shi W., Zhou L., CFD-DEM simulation and optimization of gas-cyclone performance with realistic macroscopic particulate matter, Advanced Powder Technology, 30 (2019) 2686–2702. DOI:10.1016/j.apt.2019.08.01510.1016/j.apt.2019.08.015 ↗
14. Evans B.P., Xue B., Zhang M., What’s inside the black-box?: a genetic programming method for interpreting complex machine learning models, Proceedings of the Genetic and Evolutionary Computation Conference, (2019) 1012–1020. DOI:10.1145/3321707.332172610.1145/3321707.3321726 ↗
15. Faghihi S., Keykhosravi A., Shahbazi K., Modeling of kinetic adsorption of natural surfactants on sandstone minerals: spotlight on accurate prediction and data evaluation, Colloid and Interface Science Communications, 33 (2019) 100208. DOI:10.1016/j.colcom.2019.10020810.1016/j.colcom.2019.100208 ↗
16. Finke B., Sangrós Giménez C., Kwade A., Schilde C., Viscosity model for nanoparticulate suspensions based on surface interactions, Materials (Basel, Switzerland), 14 (2021) 2752. DOI:10.3390/ma1411275210.3390/ma14112752 ↗
17. Furat O., Finegan D.P., Yang Z., Kirstein T., Smith K., Schmidt V., Super-resolving microscopy images of Li-ion electrodes for fine-feature quantification using generative adversarial networks, NPJ Computational Materials, 8 (2022) 68. DOI:10.1038/s41524-022-00749-z10.1038/s41524-022-00749-z ↗
18. Gonçalves V.D., De Almeida L.F., Mathias M.H., Wear particle classifier system based on an artificial neural network, Strojniški vestnik–Journal of Mechanical Engineering, 56 (2010) 277–281.
19. Hawkins D.M., The problem of overfitting, Journal of Chemical Information and Computer Sciences, 44 (2004) 1–12. DOI:10.1021/ci034247210.1021/ci0342472 ↗
20. Hawkins J., Ahmad S., Why neurons have thousands of synapses, a theory of sequence memory in neocortex, Frontiers in Neural Circuits, 10 (2016) 23. DOI:10.3389/fncir.2016.0002310.3389/fncir.2016.00023 ↗
21. Hawkins J., Ahmad S., Cui Y., A theory of how columns in the neocortex enable learning the structure of the world, Frontiers in Neural Circuits, 11 (2017) 81. DOI:10.3389/fncir.2017.0008110.3389/fncir.2017.00081 ↗
22. Hawkins J., Lewis M., Klukas M., Purdy S., Ahmad S., A framework for intelligence and cortical function based on grid cells in the neocortex, Frontiers in Neural Circuits, 12 (2018) 121. DOI:10.3389/fncir.2018.0012110.3389/fncir.2018.00121 ↗
23. Hinton G., How to represent part-whole hierarchies in a neural network, Neural Computation, (2022) 1–40. DOI:10.1162/neco_a_0155710.1162/neco_a_01557 ↗
24. Hole K.J., Ahmad S., A thousand brains: toward biologically constrained AI, SN Applied Sciences, 3 (2021) 743. DOI:10.1007/s42452-021-04715-010.1007/s42452-021-04715-0 ↗
25. Hoseinian F.S., Rezai B., Kowsari E., Safari M., A hybrid neural network/genetic algorithm to predict Zn(II) removal by ion flotation, Separation Science and Technology, 55 (2020) 1197–1206. DOI:10.1080/01496395.2019.158254310.1080/01496395.2019.1582543 ↗
26. Hosokawa Alpine ( Hosokawa Alpine AG), 2019, ISA von Hosokawa Alpine steigert effizienz in der produktion accessed 04.11.2022.
27. Ittiphalin M., Arnonkijpanich B., Pathumnakul S., An artificial intelligence model to estimate the fat addition ratio for the mixing process in the animal feed industry, Journal of Intelligent Manufacturing, 28 (2017) 219–228. DOI:10.1007/s10845-014-0972-x10.1007/s10845-014-0972-x ↗
28. Jatti V.S., Sekhar R., Patil R.K., Study of ball nose end milling of LM6 al alloy: surface roughness optimisation using genetic algorithm, International Journal of Engineering and Technology (IJET), 5 (2013) 2859–2865.
29. Jose N.A., Kovalev M., Bradford E., Schweidtmann A.M., Chun Zeng H., Lapkin A.A., Pushing nanomaterials up to the kilogram scale –An accelerated approach for synthesizing antimicrobial ZnO with high shear reactors, machine learning and high-throughput analysis, Chemical Engineering Journal, 426 (2021) 131345. DOI:10.1016/j.cej.2021.13134510.1016/j.cej.2021.131345 ↗
30. Kasie F.M., Bright G., Walker A., Decision support systems in manufacturing: a survey and future trends, Journal of Modelling in Management, 12 (2017) 432–454. DOI:10.1108/JM2-02-2016-001510.1108/JM2-02-2016-0015 ↗
31. Kattentidt H.U.R., Jong T.P.R., de Dalmijn W.L., Multi-sensor identification and sorting of bulk solids, Control Engineering Practice, 11 (2003) 41–47. DOI:10.1016/S0967-0661(02)00140-510.1016/S0967-0661(02)00140-5 ↗
32. Khan S., Gunpinar E., Moriguchi M., Suzuki H., Evolving a psycho-physical distance metric for generative design exploration of diverse shapes, Journal of Mechanical Design, 141 (2019) 111101. DOI:10.1115/1.404367810.1115/1.4043678 ↗
33. Khaydarov V., Heinze S., Graube M., Knüpfer A., Knespel M., Merkelbach S., Urbas L., From stirring to mixing: artificial intelligence in the process industry, 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), (2020). DOI:10.1109/ETFA46521.2020.921201810.1109/ETFA46521.2020.9212018 ↗
34. Knoll D., Prüglmeier M., Reinhart G., Predicting future inbound logistics processes using machine learning, Procedia CIRP, 52 (2016) 145–150. DOI:10.1016/j.procir.2016.07.07810.1016/j.procir.2016.07.078 ↗
35. Krishna C.V., Rohit H.R., Mohana, A review of artificial intelligence methods for data science and data analytics: applications and research challenges, 2018 2nd International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC). (2018) 591–594. DOI:10.1109/I-SMAC.2018.865367010.1109/I-SMAC.2018.8653670 ↗
36. Kundu P., Paul V., Kumar V., Mishra I.M., An adaptive modeling of petroleum emulsion formation and stability by a heuristic multiobjective artificial neural network-genetic algorithm, Petroleum Science and Technology, 34 (2016) 350–358. DOI:10.1080/10916466.2015.113516910.1080/10916466.2015.1135169 ↗
37. Kwon O., Im G.P., Lee K.C., MACE-SCM: a multi-agent and case-based reasoning collaboration mechanism for supply chain management under supply and demand uncertainties, Expert Systems with Applications, 33 (2007) 690–705. DOI:10.1016/j.eswa.2006.06.01510.1016/j.eswa.2006.06.015 ↗
38. Leal A.M.M., Kyas S., Kulik D.A., Saar M.O., Accelerating reactive transport modeling: on-demand machine learning algorithm for chemical equilibrium calculations, Transport in Porous Media, 133 (2020) 161–204. DOI:10.1007/s11242-020-01412-110.1007/s11242-020-01412-1 ↗
39. LeCun Y., Bengio Y., Hinton G., Deep learning, Nature, 521 (2015) 436–444. DOI:10.1038/nature1453910.1038/nature14539 ↗
40. Lee E.A., Cyber physical systems: design challenges, 2008 11th IEEE International Symposium on Object and Component-Oriented Real-Time Distributed Computing (ISORC), (2008) 363–369. DOI:10.1109/ISORC.2008.2510.1109/ISORC.2008.25 ↗
41. Lee J.H., Shin J., Realff M.J., Machine learning: overview of the recent progresses and implications for the process systems engineering field, Computers & Chemical Engineering, 114 (2018) 111–121. DOI:10.1016/j.compchemeng.2017.10.00810.1016/j.compchemeng.2017.10.008 ↗
42. Lee X.Y., Balu A., Stoecklein D., Ganapathysubramanian B., Sarkar S., A case study of deep reinforcement learning for engineering design: application to microfluidic devices for flow sculpting, Journal of Mechanical Design, 141 (2019) 111401. DOI:10.1115/1.404439710.1115/1.4044397 ↗
43. Lewis M., Purdy S., Ahmad S., Hawkins J., Locations in the neocortex: a theory of sensorimotor object recognition using cortical grid cells, Frontiers in Neural Circuits, 13 (2019) 22. DOI:10.3389/fncir.2019.0002210.3389/fncir.2019.00022 ↗
44. Li J., Chen T., Lim K., Chen L., Khan S.A., Xie J., Wang X., Deep learning accelerated gold nanocluster synthesis, Advanced Intelligent Systems, 1 (2019) 1900029. DOI:10.1002/aisy.20190002910.1002/aisy.201900029 ↗
45. Li J., Tao J., CFD-DEM Two-way coupled numerical simulation of bridge local scour behavior under clear-water conditions, Transportation Research Record, 2672 (2018) 107–117. DOI:10.1177/036119811878317010.1177/0361198118783170 ↗
46. Li L., Zhai Y., Jin Y., Wang J., Wang H., Ma M., Stability, thermal performance and artificial neural network modeling of viscosity and thermal conductivity of Al2O3-ethylene glycol nanofluids, Powder Technology, 363 (2020) 360–368. DOI:10.1016/j.powtec.2020.01.00610.1016/j.powtec.2020.01.006 ↗
47. Linkens D.A., AI in control systems engineering, The Knowledge Engineering Review, 5 (1990) 181–214. DOI:10.1017/S026988890000540310.1017/S0269888900005403 ↗
48. Liu X., Li K., McAfee M., Nguyen B.K., McNally G.M., Dynamic gray-box modeling for on-line monitoring of polymer extrusion viscosity, Polymer Engineering & Science, 52 (2012) 1332–1341. DOI:10.1002/pen.2308010.1002/pen.23080 ↗
49. Marcos A.G., Pernía Espinoza A.V., Elías F.A., Forcada A.G., A neural network-based approach for optimising rubber extrusion lines, International Journal of Computer Integrated Manufacturing, 20 (2007) 828–837. DOI:10.1080/0951192060110880810.1080/09511920601108808 ↗
50. Martínez-de-Pisón F.J., Pernía A.V., Blanco J., González A., Lostado R., Control model for an elastomer extrusion process obtained via a comparative analysis of data mining and artificial intelligence techniques, Polymer-Plastics Technology and Engineering, 49 (2010) 779–790. DOI:10.1080/0360255100374958510.1080/03602551003749585 ↗
51. Massarelli C., Campanale C., Uricchio V.F., A handy open-source application based on computer vision and machine learning algorithms to count and classify microplastics, Water, 13 (2021) 2104. DOI:10.3390/w1315210410.3390/w13152104 ↗
52. Mavrovouniotis M., Artificial Intelligence in process engineering, Academic Press Inc, 2012, ISBN: 9780124315129.
53. McKay B., Lennox B., Willis M., Barton G.W., Montague G., Extruder modelling: a comparison of two paradigms, UKACC International Conference on Control ’96 (Conf Publ No 427), (1996). DOI:10.1049/cp:1996064310.1049/cp:19960643 ↗
54. Mojtahedi S.F.F., Ebtehaj I., Hasanipanah M., Bonakdari H., Amnieh H.B., Proposing a novel hybrid intelligent model for the simulation of particle size distribution resulting from blasting, Engineering with Computers, 35 (2019) 47–56. DOI:10.1007/s00366-018-0582-x10.1007/s00366-018-0582-x ↗
55. Nielsen R.F., Nazemzadeh N., Sillesen L.W., Andersson M.P., Gernaey K.V., Mansouri S.S., Hybrid machine learning assisted modelling framework for particle processes, Computers & Chemical Engineering, 140 (2020) 106916. DOI:10.1016/j.compchemeng.2020.10691610.1016/j.compchemeng.2020.106916 ↗
56. Nirschl H., Winkler M., Sinn T., Menesklou P., Autonomous processes in particle technology, Chemie Ingenieur Technik, 94 (2022) 230–239. DOI:10.1002/cite.20210005910.1002/cite.202100059 ↗
57. Nobari A.H., Chen W., Ahmed F., Range-constrained generative adversarial network: design synthesis under constraints using conditional generative adversarial networks, Journal of Mechanical Design, 144 (2021) 021708. DOI:10.1115/1.405244210.1115/1.4052442 ↗
58. Oh S., Jung Y., Kim S., Lee I., Kang N., Deep generative design: integration of topology optimization and generative models, Journal of Mechanical Design, 141 (2019) 111405. DOI:10.1115/1.404422910.1115/1.4044229 ↗
59. Ongsulee P., Artificial intelligence, machine learning and deep learning, 2017 15th International Conference on ICT and Knowledge Engineering (ICT&KE), (2017). DOI:10.1109/ICTKE.2017.825962910.1109/ICTKE.2017.8259629 ↗
60. Patel A.R., Ramaiya K.K., Bhatia C.V., Shah H.N., Bhavsar S.N., Artificial intelligence: prospect in mechanical engineering field—a review, Data Science and Intelligent Applications, (2021) 267–282. DOI:10.1007/978-981-15-4474-3_3110.1007/978-981-15-4474-3_31 ↗
61. Pellegrino F., Isopescu R., Pellutiè L., Sordello F., Rossi A.M., Ortel E., Martra G., Hodoroaba V-D, Maurino V., Machine learning approach for elucidating and predicting the role of synthesis parameters on the shape and size of TiO2 nanoparticles, Scientific Reports, 10 (2020) 18910. DOI:10.1038/s41598-020-75967-w10.1038/s41598-020-75967-w ↗
62. Peršak T., Viltužnik B., Hernavs J., Klančnik S., Vision-based sorting systems for transparent plastic granulate, Applied Sciences, 10 (2020) 4269. DOI:10.3390/app1012426910.3390/app10124269 ↗
63. Pham D.T., Pham P.T.N., Artificial intelligence in engineering, International Journal of Machine Tools and Manufacture, 39 (1999) 937–949. DOI:10.1016/S0890-6955(98)00076-510.1016/S0890-6955(98)00076-5 ↗
64. Pilania G., Machine learning in materials science: from explainable predictions to autonomous design, Computational Materials Science, 193 (2021) 110360. DOI:10.1016/j.commatsci.2021.11036010.1016/j.commatsci.2021.110360 ↗
65. Psichogios D.C., Ungar L.H., A hybrid neural network-first principles approach to process modeling, AIChE Journal, 38 (1992) 1499–1511. DOI:10.1002/aic.69038100310.1002/aic.690381003 ↗
66. Qu X.Y., Zeng P., Xu C.C., Fu D.D., RNN-based method for fault diagnosis of grinding system, 2017 IEEE 7th Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER), (2017). 673–678. DOI:10.1109/CYBER.2017.844634810.1109/CYBER.2017.8446348 ↗
67. Rahmani A.M., Azhir E., Ali S., Mohammadi M., Ahmed O.H., Yassin Ghafour M., Hasan Ahmed S., Hosseinzadeh M., Artificial intelligence approaches and mechanisms for big data analytics: a systematic study, PeerJ Computer Science, 7 (2021) e488. DOI:10.7717/peerj-cs.48810.7717/peerj-cs.488 ↗
68. Raina A., Cagan J., McComb C., Transferring design strategies from human to computer and across design problems, Journal of Mechanical Design, 141 (2019) 114501. DOI:10.1115/1.404425810.1115/1.4044258 ↗
69. Raschka S., Patterson J., Nolet C., Machine learning in python: main developments and technology trends in data science, Machine Learning, and Artificial Intelligence, Information, 11 (2020) 193. DOI:10.3390/info1104019310.3390/info11040193 ↗
70. RatnaRaju L., Nandi T.K., Design optimization of perforated plate heat exchangers using genetic algorithm, International Journal of Advanced Materials Manufacturing and Characterization, 3 (2013) 89–93. DOI:10.11127/ijammc.2013.02.01610.11127/ijammc.2013.02.016 ↗
71. Rupali M., Amit P., A review paper on general concepts of “artificial intelligence and machine learning”, International Advanced Research Journal in Science, Engineering and Technology, 4 (2017) 79–82. DOI:10.17148/iarjset/nciarcse.2017.2210.17148/IARJSET/NCIARCSE.2017.22 ↗
72. Sakunthala S., Kiranmayi R., Mandadi P.N., A review on artificial intelligence techniques in electrical drives: neural networks, fuzzy logic, and genetic algorithm, 2017 International Conference on Smart Technologies for Smart Nation (SmartTechCon), (2017). DOI:10.1109/SmartTechCon.2017.835833510.1109/SmartTechCon.2017.8358335 ↗
73. Sarkar S., Mondal S., Joly M., Lynch M.E., Bopardikar S.D., Acharya R., Perdikaris P., Multifidelity and multiscale Bayesian framework for high-dimensional engineering design and calibration, Journal of Mechanical Design, 141 (2019) 121001. DOI:10.1115/1.404459810.1115/1.4044598 ↗
74. Schaffer C., Selecting a classification method by cross-validation, Machine Learning, 13 (1993) 135–143. DOI:10.1007/BF0099310610.1007/BF00993106 ↗
75. Schilde C., Kampen I., Kwade A., Dispersion kinetics of nano-sized particles for different dispersing machines, Chemical Engineering Science, 65 (2010) 3518–3527. DOI:10.1016/j.ces.2010.02.04310.1016/j.ces.2010.02.043 ↗
76. Schrader M., Pommerehne K., Wolf S., Finke B., Schilde C., Kampen I., Lichtenegger T., Krull R., Kwade A., Design of a CFD-DEM-based method for mechanical stress calculation and its application to glass bead-enhanced cultivations of filamentous Lentzea aerocolonigenes, Biochemical Engineering Journal, 148 (2019) 116–130. DOI:10.1016/j.bej.2019.04.01410.1016/j.bej.2019.04.014 ↗
77. Schweidtmann A.M., Esche E., Fischer A., Kloft M., Repke J.-U., Sager S., Mitsos A., Machine learning in chemical engineering: a perspective, Chemie Ingenieur Technik, 93 (2021) 2029–2039. DOI:10.1002/cite.20210008310.1002/cite.202100083 ↗
78. Srivastava N., Hinton G., Krizhevsky A., Sutskever I., Salakhutdinov R., Dropout: a simple way to prevent neural networks from overfitting, The Journal of Machine Learning Research, 15 (2014) 1929–1958.
79. Stosch M. von, Oliveira R., Peres J., Feyo de Azevedo S., Hybrid semi-parametric modeling in process systems engineering: past, present and future, Computers & Chemical Engineering, 60 (2014) 86–101. DOI:10.1016/j.compchemeng.2013.08.00810.1016/j.compchemeng.2013.08.008 ↗
80. Sun B., Fernandez M., Barnard A.S., Machine learning for silver nanoparticle electron transfer property prediction, Journal of Chemical Information and Modeling, 57 (2017) 2413–2423. DOI:10.1021/acs.jcim.7b0027210.1021/acs.jcim.7b00272 ↗
81. Tao F., Sui F., Liu A., Qi Q., Zhang M., Song B., Guo Z., Lu S.C.-Y., Nee A.Y.C., Digital twin-driven product design framework, International Journal of Production Research, 57 (2019) 3935–3953. DOI:10.1080/00207543.2018.144322910.1080/00207543.2018.1443229 ↗
82. Tao H., Wu T., Aldeghi M., Wu T.C., Aspuru-Guzik A., Kumacheva E., Nanoparticle synthesis assisted by machine learning, Nature Reviews Materials, 6 (2021) 701–716. DOI:10.1038/s41578-021-00337-510.1038/s41578-021-00337-5 ↗
83. Taur J.S., Tao C.W., Tsai C.C., Temperature control of a plastic extrusion barrel using PID fuzzy controllers, Proceedings IEEE Conference on Industrial Automation and Control Emerging Technology Applications, (1995) 370–375. DOI:10.1109/IACET.1995.52759010.1109/IACET.1995.527590 ↗
84. Thon C., Böttcher A.-C., Möhlen F., Yu M., Kwade A., Schilde C., Multi-modal framework to model wet milling through numerical simulations and artificial intelligence (part 1), Chemical Engineering Journal, 449 (2022a) 137794. DOI:10.1016/j.cej.2022.13779410.1016/j.cej.2022.137794 ↗
85. Thon C., Böttcher A.-C., Möhlen F., Yu M., Kwade A., Schilde C., Multi-modal framework to model wet milling through numerical simulations and artificial intelligence (part 2), Chemical Engineering Journal, 450 (2022b) 137947. DOI:10.1016/j.cej.2022.13794710.1016/j.cej.2022.137947 ↗
86. Thon C., Finke B., Kwade A., Schilde C., Artificial Intelligence in Process Engineering, Advanced Intelligent Systems, 3 (2021) 2000261. DOI:10.1002/aisy.20200026110.1002/aisy.202000261 ↗
87. Tie M., Yue H., Chai T., A hybrid intelligent soft-sensor model for dynamic particle size estimation in grinding circuits, International Symposium on Neural Networks, Advances in Neural Networks – ISNN 2005, 3498 (2005) 871–876. DOI:10.1007/11427469_13810.1007/11427469_138 ↗
88. Toorajipour R., Sohrabpour V., Nazarpour A., Oghazi P., Fischl M., Artificial intelligence in supply chain management: a systematic literature review, Journal of Business Research, 122 (2021) 502–517. DOI:10.1016/j.jbusres.2020.09.00910.1016/j.jbusres.2020.09.009 ↗
89. Tsai C.C., Lu C.H., Fuzzy supervisory predictive PID control of a plastics extruder barrel, Journal of the Chinese Institute of Engineers, 21 (1998) 619–624. DOI:10.1080/02533839.1998.967042310.1080/02533839.1998.9670423 ↗
90. Uhlemann J., Diedam H., Hoheisel W., Schikarski T., Peukert W., Modeling and simulation of process technology for nanoparticulate drug formulations—a particle technology perspective, Pharmaceutics, 13 (2021) 22. DOI:10.3390/pharmaceutics1301002210.3390/pharmaceutics13010022 ↗
91. Venkatasubramanian V., The promise of artificial intelligence in chemical engineering: is it here, finally?, AIChE Journal, 65 (2019) 466–478. DOI:10.1002/aic.1648910.1002/aic.16489 ↗
92. Wahl C.B., Aykol M., Swisher J.H., Montoya J.H., Suram S.K., Mirkin C.A., Machine learning-accelerated design and synthesis of polyelemental heterostructures, Science Advances, 7 (2021) eabj5505. DOI:10.1126/sciadv.abj550510.1126/sciadv.abj5505 ↗
93. Wang T., Ramik D.M., Sabourin C., Madani K., Intelligent systems for industrial robotics: application in logistic field, Industrial Robot: An International Journal, 39 (2012) 251–259. DOI:10.1108/0143991121121707110.1108/01439911211217071 ↗
94. Wilts H., Garcia B.R., Garlito R.G., Gómez L.S., Prieto E.G., Artificial intelligence in the sorting of municipal waste as an enabler of the circular economy, Resources, 10 (2021) 28. DOI:10.3390/resources1004002810.3390/resources10040028 ↗
95. Wisniewski J., Optimal design of reinforcing fibres in multilayer composites using genetic algorithms, Fibres And Textiles In Eastern Europe, 12 (2004) 58–63.
96. Ying X., An overview of overfitting and its solutions, Journal of Physics: Conference Series, 1168 (2019) 022022. DOI:10.1088/1742-6596/1168/2/02202210.1088/1742-6596/1168/2/022022 ↗
97. Zhang S., Wang F., He D., Jia R., Batch-to-batch control of particle size distribution in cobalt oxalate synthesis process based on hybrid model, Powder Technology, 224 (2012) 253–259. DOI:10.1016/j.powtec.2012.03.00110.1016/j.powtec.2012.03.001 ↗
98. Zhang X., Chan F.T.S., Adamatzky A., Mahadevan S., Yang H., Zhang Z., Deng Y., An intelligent physarum solver for supply chain network design under profit maximization and oligopolistic competition, International Journal of Production Research, 55 (2017) 244–263. DOI:10.1080/00207543.2016.120307510.1080/00207543.2016.1203075 ↗
99. Zhu M., Chen X., Zhou C.-s., Xu J.-s., Musa O., Numerical study of micron-scale aluminum particle combustion in an afterburner using two-way coupling CFD–DEM approach, Flow, Turbulence and Combustion, 105 (2020) 191–212. DOI:10.1007/s10494-019-00104-110.1007/s10494-019-00104-1 ↗