journal article·2023-01-10Open access

Cellulose Nanofibrils Pulverized from Biomass Resources: Past, Present, and Future Perspectives

Tetsuo Kondo

KONA Powder and Particle Journal· Volume 40· Issue 0

Abstract

Advances in nanotechnology have changed conventional concepts in materials science. This has aloso strongly influenced natural biomass products with hierarchically built-up structures. In general, hierarchical structures in bio-based materials are built up by molecular self-assembly, followed by nanoassembly to form higher-level structures. Key to each step is the formation of interactions at each individual scale. Nature usually achieves such fabrication through a bottom-up process. However, fabrication can also be achieved through a top-down process, with various such downsizing methods now in development. This review article aims to describe trends in nanofiber technology among downsizing processes applied to cellulose as a representative biomass, ranging from fundamentals to recent techniques. The advantages of our recently developed technique, nanopulverization by aqueous counter collision, are also discussed. This method successfully decomposes interactions selectively without damaging the molecular structure, finally liberating components of various sizes into water to provide a transparent and homogeneous component–water system. As nanocellulose research is a broad area involving various fields, the cited references are limited to the scope of the author’s knowledge.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications · Polysaccharides and Plant Cell Walls

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate School of Bioresource and Bioenvironmental Sciences, Kyushu University, Japan

Enviro-Sustainable Materials Science Lab, Institute of Agriculture, Tokyo University of Agriculture and Technology, Japan

References (88)

Show source-provided references
1. Apelgren P., Karabulut E., Amoroso M., Mantas A., Martínez Ávila H., Kölby L., Kondo T., Toriz G., Gatenholm P., In vivo human cartilage formation in three-dimensional bioprinted constructs with a novel bacterial nanocellulose bioink, ACS Biomaterials Science & Engineering, 5 (2019) 2482–2490. DOI:10.1021/acsbiomaterials.9b0015710.1021/acsbiomaterials.9b00157 ↗
2. Araki J., Wada M., Kuga S., Okano T., Flow properties of microcrystalline cellulose suspension prepared by acid treatment of native cellulose, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 142 (1998) 75–82. DOI:10.1016/S0927-7757(98)00404-X10.1016/S0927-7757(98)00404-X ↗
3. Araki J., Wada M., Kuga S., Okano T., Influence of surface charge on viscosity behavior of cellulose microcrystal suspension, Journal of Wood Science, 45 (1999) 258–261. DOI:10.1007/BF0117773610.1007/BF01177736 ↗
4. Araki J., Wada M., Kuga S., Steric stabilization of a cellulose microcrystal suspension by poly(ethylene glycol) grafting, Langmuir, 17 (2001) 21–27. DOI:10.1021/la001070m10.1021/la001070m ↗
5. Clemons C., Wood-plastic composites in the United States—the interfacing of two industries, Forest Products Journal, 52 (2002) 10–18. https://www.fs.usda.gov/treesearch/pubs/8778
6. Cousins S.K., Brown R.M., Cellulose I microfibril assembly: computational molecular mechanics energy analysis favours bonding by van der Waals forces as the initial step in crystallization, Polymer, 36 (1995) 3885–3888. DOI:10.1016/0032-3861(95)99782-P10.1016/0032-3861(95)99782-P ↗
7. Drexler K.E., Nanosystems: Molecular Machinery, Manufacturing, and Computation, Wiley, 1992, ISBN: 978-0-471-57518-4.
8. Endo T., Kitagawa R., Zhang F., Hirotsu T. Hisokawa J., Mechano-chemical preparation of novel cellulose-poly(ethylene glycol) composite, Chemistry Letters, 28 (1999) 1155–1156. DOI:10.1246/cl.1999.115510.1246/cl.1999.1155 ↗
9. Goussé C., Chanzy H., Excoffier G., Soubeyrand L., Fleury E., Stable suspensions of partially silylated cellulose whiskers dispersed in organic solvents, Polymer, 43 (2002) 2645–2651. DOI:10.1016/S0032-3861(02)00051-410.1016/S0032-3861(02)00051-4 ↗
10. Hahladakis J.N., Velis C.A., Weber R., Iacovidou E., Purnell P., An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling, Journal of Hazardous Materials, 344 (2018) 179–199. DOI:10.1016/j.jhazmat.2017.10.01410.1016/j.jhazmat.2017.10.014 ↗
11. Hai L.V., Zhai L., Kim H.C., Panicker P.S., Pham D.H., Kim J., Chitosan nanofiber and cellulose nanofiber blended composite applicable for active food packaging, Nanomaterials, 10 (2020) 1752. DOI:10.3390/nano1009175210.3390/nano10091752 ↗
12. Halim A., Xu Y., Lin K.-H., Kobayashi M., Kajiyama M., Enomae T., Fabrication of cellulose nanofiber-deposited cellulose sponge as an oil-water separation membrane, Separation and Purification Technology, 224 (2019) 322–331. DOI:10.1016/j.seppur.2019.05.00510.1016/j.seppur.2019.05.005 ↗
13. Hayashi N., Kondo T., Ishihara M., Enzymatically produced nano-ordered short elements containing cellulose Iβ crystalline domains, Carbohydrate Polymers, 61 (2005) 191–197. DOI:10.1016/j.carbpol.2005.04.01810.1016/j.carbpol.2005.04.018 ↗
14. Hayashi N., Sugiyama J., Okano T., Ishihara M., Selective degradation of the cellulose Iα component in Cladophora cellulose with Trichoderma viride cellulase, Carbohydrate Research, 305 (1997a)109–116. DOI:10.1016/S0008-6215(97)00281-410.1016/S0008-6215(97)00281-4 ↗
15. Hayashi N., Sugiyama J., Okano T., Ishihara M., The enzymatic susceptibility of cellulose microfibrils of the algal-bacterial type and the cotton-ramie type, Carbohydrate Research, 305 (1997b)261–269. DOI:10.1016/S0008-6215(97)10032-510.1016/S0008-6215(97)10032-5 ↗
16. Heise K., Kontturi E., Allahverdiyeva Y., Tammelin T., Linder M.B., Nonappa, Ikkala O., Nanocellulose: recent fundamental advances and emerging biological and biomimicking applications, Advanced Materials, 33 (2021) 2004349. DOI:10.1002/adma.20200434910.1002/adma.202004349 ↗
17. Heux L., Chauve G., Bonini C., Nonflocculating and chiral-nematic self-ordering of cellulose microcrystals suspensions in nonpolar solvents, Langmuir, 16 (2000) 8210–8212. DOI:10.1021/la991395710.1021/la9913957 ↗
18. Huan S., Yokota S., Bai L., Ago M., Borghei M., Kondo T., Rojas O.J., Formulation and composition effects in phase transitions of emulsions costabilized by cellulose nanofibrils and an ionic surfactant, Biomacromolecules, 18 (2017) 4393–4404. DOI:10.1021/acs.biomac.7b0145210.1021/acs.biomac.7b01452 ↗
19. Hubbe M.A., Beck K.R., O’Neal W.G., Sharma Y.C., Cellulosic substrates for removal of pollutants from aqueous systems: a review. 2. Dyes, BioResources, 7 (2012) 2592–2687. https://bioresources.cnr.ncsu.edu/wp-content/uploads/2016/06/BioRes_07_2_2592_Hubbe_Cell_Remov_Pt2_Dyes.pdf
20. Hughes J., McCully M.E., The use of an optical brightener in the study of plant structure, Stain Technology, 50 (1975) 319–329. DOI:10.3109/1052029750911708210.3109/10520297509117082 ↗
21. Igarashi Y., Sato A., Okumura H., Nakatsubo F., Yano H., Manufacturing process centered on dry-pulp direct kneading method opens a door for commercialization of cellulose nanofiber reinforced composites, Chemical Engineering Journal, 354 (2018) 563–568. DOI:10.1016/j.cej.2018.08.02010.1016/j.cej.2018.08.020 ↗
22. Ishida K., Yokota S., Kondo T., Localized surface acetylation of aqueous counter collision cellulose nanofibrils using a Pickering emulsion as an interfacial reaction platform, Carbohydrate Polymers, 261 (2021) 117845. DOI:10.1016/j.carbpol.2021.11784510.1016/j.carbpol.2021.117845 ↗
23. Ishikawa G., Tsuji T., Tagawa S., Kondo T., Adsorption of Janus-type amphiphilic cellulose nanofibrils onto microspheres of semicrystalline polymers, Macromolecules, 54 (2021) 9393–9400. DOI:10.1021/acs.macromol.1c0116310.1021/acs.macromol.1c01163 ↗
24. Isogai A., Emerging nanocellulose technologies: recent developments, Advanced Materials, 33 (2021) 2000630. DOI:10.1002/adma.20200063010.1002/adma.202000630 ↗
25. Jiang F., Kondo T., Hsieh Y.-L., Rice straw cellulose nanofibrils via aqueous counter collision and differential centrifugation and their self-assembled structures, ACS Sustainable Chemistry & Engineering, 4 (2016) 1697–1706. DOI:10.1021/acssuschemeng.5b0165310.1021/acssuschemeng.5b01653 ↗
26. Jiang S., Chen Q., Tripathy M., Luijten E., Schweizer K.S., Granick S., Janus particle synthesis and assembly, Advanced Materials, 22 (2010) 1060–1071. DOI:10.1002/adma.20090409410.1002/adma.200904094 ↗
27. Kargarzadeh H., Mariano M., Huang J., Lin N., Ahmad I., Dufresne A., Thomas S., Recent developments on nanocellulose reinforced polymer nanocomposites: a review, Polymer, 132 (2017) 368–393. DOI:10.1016/j.polymer.2017.09.04310.1016/j.polymer.2017.09.043 ↗
28. Kasuga T., Yagyu H., Uetani K., Koga H., Nogi M., Cellulose nanofiber coatings on Cu electrodes for cohesive protection against water-induced short-circuit failures, ACS Applied Nano Materials, 4 (2021) 3861–3868. DOI:10.1021/acsanm.1c0026710.1021/acsanm.1c00267 ↗
29. Kawano Y., Kondo T., Preparation of aqueous carbon material suspensions by aqueous counter collision, Chemistry Letters, 43 (2014) 483–485. DOI:10.1246/cl.13104610.1246/cl.131046 ↗
30. Kim J.-K., Choi B., Jin J., Transparent, water-stable, cellulose nanofiber-based packaging film with a low oxygen permeability, Carbohydrate Polymers, 249 (2020) 116823. DOI:10.1016/j.carbpol.2020.11682310.1016/j.carbpol.2020.116823 ↗
31. Kitagawa K., Yano H., Microfibrillated cellulose composite resin and method for producing the same, JP Patent (2012) JP5030667B2. https://patents.google.com/patent/JP5030667B2/en
32. Klemm D., Cranston E.D., Fischer D., Gama M., Kedzior S.A., Kralisch D., Kramer F., Kondo T., Lindström T., Nietzsche S., Petzold-Welcke K., Rauchfuß F., Nanocellulose as a natural source for groundbreaking applications in materials science: today’s state, Materials Today, 21 (2018) 720–748. DOI:10.1016/j.mattod.2018.02.00110.1016/j.mattod.2018.02.001 ↗
33. Kondo T., New aspects of cellulose nanofibers, Mokuzai Gakkaishi, 54 (2008) 107–115. DOI:10.2488/jwrs.54.10710.2488/jwrs.54.107 ↗
34. Kondo T., Kasai W., Method for imparting water repellency and oil resistance using cellulose nanofibers, JP Patent (2015) JP5690387B2. https://patents.google.com/patent/JP5690387B2/en
35. Kondo T., Kose R., Naito H., Kasai W., Aqueous counter collision using paired water jets as a novel means of preparing bio-nanofibers, Carbohydrate Polymers, 112 (2014a)284–290. DOI:10.1016/j.carbpol.2014.05.06410.1016/j.carbpol.2014.05.064 ↗
36. Kondo T., Kumon D., Mieno A., Tsujita Y., Kose R., Preparation and characterization of two types of separate collagen nanofibers with different widths using aqueous counter collision as a gentle top-down process, Materials Research Express, 1 (2014b) 045016. DOI: 10.1088/2053-1591/1/4/04501610.1088/2053-1591/1/4/045016 ↗
37. Kondo T., Morita M., Hayakawa K., Onda Y., Wet pulverizing of polysaccharides, US Patent (2005) US7357339B2. https://patents.google.com/patent/US7357339B2
38. Kondo T., Tanaka H., Yokota S., Nanocomposite and manufacturing method of nanocomposite, JP Patent (2021) JP6979083B2. https://patents.google.com/patent/JP6979083B2/en
39. Kose R., Kasai W., Kondo T., Switching surface properties of substrates by coating with a cellulose nanofiber having a high adsorbability, Sen’i Gakkaishi, 67 (2011a)163–167. DOI:10.2115/fiber.67.16310.2115/fiber.67.163 ↗
40. Kose R., Kondo T., Favorable 3D-network formation of chitin nanofibers dispersed in water prepared using aqueous counter collision, Sen’i Gakkaishi, 67 (2011b)91–95. DOI:10.2115/fiber.67.9110.2115/fiber.67.91 ↗
41. Kose R., Mitani I., Kasai W., Kondo T., “Nanocellulose” as a single nanofiber prepared from pellicle secreted by Gluconacetobacter xylinus using aqueous counter collision, Biomacromolecules, 12 (2011c)716–720. DOI: 10.1021/bm101346910.1021/bm1013469 ↗
42. Li Q., Renneckar S., Supramolecular structure characterization of molecularly thin cellulose I nanoparticles, Biomacromolecules, 12 (2011) 650–659. DOI:10.1021/bm101315y10.1021/bm101315y ↗
43. Linder M., Teeri T.T., The cellulose-binding domain of the major cellobiohydrolase of Trichoderma reesei exhibits true reversibility and a high exchange rate on crystalline cellulose, Proceedings of the National Academy of Sciences, 93 (1996) 12251–12255. DOI:10.1073/pnas.93.22.1225110.1073/pnas.93.22.12251 ↗
44. Lönnberg H., Zhou Q., Brumer H., Teeri T.T., Malmström E., Hult A., Grafting of cellulose fibers with poly(ε-caprolactone) and poly(l-lactic acid) via ring-opening polymerization, Biomacromolecules, 7 (2006) 2178–2185. DOI:10.1021/bm060178z10.1021/bm060178z ↗
45. Marchessault R.H., Morehead F.F., Walter N.M., Liquid crystal systems from fibrillar polysaccharides, Nature, 184 (1959) 632–633. DOI:10.1038/184632a010.1038/184632a0 ↗
46. Marturano V., Cerruti P., Ambrogi V., Polymer additives, Physical Sciences Reviews, 2 (2017) 20160130. DOI:10.1515/psr-2016-013010.1515/psr-2016-0130 ↗
47. Mazeau K., Wyszomirski M., Modelling of Congo red adsorption on the hydrophobic surface of cellulose using molecular dynamics, Cellulose, 19 (2012) 1495–1506. DOI:10.1007/s10570-012-9757-610.1007/s10570-012-9757-6 ↗
48. Mukherjee S.M., Woods H.J., X-ray and electron microscope studies of the degradation of cellulose by sulphuric acid, Biochimica et Biophysica Acta, 10 (1953) 499–511. DOI:10.1016/0006-3002(53)90295-910.1016/0006-3002(53)90295-9 ↗
49. Nagashima A., Tsuji T., Kondo T., A uniaxially oriented nanofibrous cellulose scaffold from pellicles produced by Gluconacetobacter xylinus in dissolved oxygen culture, Carbohydrate Polymers, 135 (2016) 215–224. DOI:10.1016/j.carbpol.2015.08.07710.1016/j.carbpol.2015.08.077 ↗
50. Nakagaito A.N., Iwamoto S., Yano H., Bacterial cellulose: the ultimate nano-scalar cellulose morphology for the production of high-strength composites, Applied Physics A, 80 (2005b)93–97. DOI:10.1007/s00339-004-2932-310.1007/s00339-004-2932-3 ↗
51. Nakagaito A.N., Yano H., Novel high-strength biocomposites based on microfibrillated cellulose having nano-order-unit web-like network structure, Applied Physics A, 80 (2005a)155–159. DOI:10.1007/s00339-003-2225-210.1007/s00339-003-2225-2 ↗
52. Nechyporchuk O., Belgacem M.N., Bras J., Production of cellulose nanofibrils: a review of recent advances, Industrial Crops and Products, 93 (2016) 2–25. DOI:10.1016/j.indcrop.2016.02.01610.1016/j.indcrop.2016.02.016 ↗
53. Nge T.T., Lee S.-H., Endo T., Preparation of nanoscale cellulose materials with different morphologies by mechanical treatments and their characterization, Cellulose, 20 (2013) 1841–1852. DOI:10.1007/s10570-013-9962-y10.1007/s10570-013-9962-y ↗
54. Nickerson R.F., Habrle J.A., Cellulose intercrystalline structure, Industrial & Engineering Chemistry, 39 (1947) 1507–1512. DOI:10.1021/ie50455a02410.1021/ie50455a024 ↗
55. Nishino T., Matsuda I., Hirao K., All-cellulose composite, Macromolecules, 37 (2004) 7683–7687. DOI:10.1021/ma049300h10.1021/ma049300h ↗
56. Nodera A., Hashiba H., Tanaka H., Polyolefin resin composition, JP Patent, (2016) JP2016079311A. https://patents.google.com/patent/JP2016079311A/en
57. Oksman K., Aitomäki Y., Mathew A.P., Siqueira G., Zhou Q., Butylina S., Tanpichai S., Zhou X., Hooshmand S., Review of the recent developments in cellulose nanocomposite processing, Composites Part A: Applied Science and Manufacturing, 83 (2016) 2–18. DOI:10.1016/j.compositesa.2015.10.04110.1016/j.compositesa.2015.10.041 ↗
58. Oksman K., Sain M., Cellulose Nanocomposites, Processing, Characterization and Properties, ACS Symposium Series, 938, American Chemical Society, Washington, DC, 2006, ISBN: 9780841239807. DOI:10.1021/bk-2006-093810.1021/bk-2006-0938 ↗
59. Payen A., Mémoire sur la composition du tissu propre des plantes et du ligneux, Comptes Rendus, 7 (1838) 1052–1056.
60. Peretz R., Mamane H., Sterenzon E., Gerchman Y., Rapid quantification of cellulose nanocrystals by Calcofluor White fluorescence staining, Cellulose, 26 (2019) 971–977. DOI:10.1007/s10570-018-2162-z10.1007/s10570-018-2162-z ↗
61. Revol J.F., Bradford H., Giasson J., Marchessault R.H., Gray D.G., Helicoidal self-ordering of cellulose microfibrils in aqueous suspension, International Journal of Biological Macromolecules, 14 (1992) 170–172. DOI:10.1016/S0141-8130(05)80008-X10.1016/S0141-8130(05)80008-X ↗
62. Saito T., Isogai A., TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions, Biomacromolecules, 5 (2004) 1983–1989. DOI:10.1021/bm049776910.1021/bm0497769 ↗
63. Saito T., Kuramae R., Wohlert J., Berglund L.A., Isogai A., An ultrastrong nanofibrillar biomaterial: the strength of single cellulose nanofibrils revealed via sonication-induced fragmentation, Biomacromolecules, 14 (2013) 248–253. DOI:10.1021/bm301674e10.1021/bm301674e ↗
64. Saito T., Nishiyama Y., Putaux J.-L., Vignon M., Isogai A., Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose, Biomacromolecules, 7 (2006) 1687–1691. DOI:10.1021/bm060154s10.1021/bm060154s ↗
65. Shibata I., Isogai A., Nitroxide-mediated oxidation of cellulose using TEMPO derivatives: HPSEC and NMR analyses of the oxidized products, Cellulose, 10 (2003) 335–341. DOI:10.1023/A:102733040947010.1023/A:1027330409470 ↗
66. Shojaeiarani J., Bajwa D.S., Chanda S., Cellulose nanocrystal based composites: a review, Composites Part C: Open Access, 5 (2021) 100164. DOI:10.1016/j.jcomc.2021.10016410.1016/j.jcomc.2021.100164 ↗
67. Tagawa S., Ishida K., Tsuji T., Kondo T., Facile size evaluation of cellulose nanofibrils adsorbed on polypropylene substrates using fluorescence microscopy, Cellulose, 28 (2021) 2917–2929. DOI:10.1007/s10570-021-03759-010.1007/s10570-021-03759-0 ↗
68. Takai-Yamashita C., Mabuchi Y., Ikeda J., Fuji M., Senna M., Ohya Y., Physicochemical effects and surface activity of cellulose nanofiber sols induced by a planetary ball milling treatment, Journal of the Society of Powder Technology, Japan, 58 (2021) 164–169. DOI:10.4164/sptj.58.16410.4164/sptj.58.164 ↗
69. Taniguchi T., Okamura K., New films produced from microfibrillated natural fibres, Polymer International, 47 (1998) 291–294. DOI:10.1002/(SICI)1097-0126(199811)47:3<291::AID-PI11>3.0.CO;2-110.1002/(SICI)1097-0126(199811)47:3<291::AID-PI11>3.0.CO;2-1 ↗
70. Taton T.A., Two-way traffic, Nature Materials, 2 (2003) 73–74. DOI:10.1038/nmat82410.1038/nmat824 ↗
71. Thomas P., Duolikun T., Rumjit N.P., Moosavi S., Lai C.W., Bin Johan M.R., Fen L.B., Comprehensive review on nanocellulose: recent developments, challenges and future prospects, Journal of the Mechanical Behavior of Biomedical Materials, 110 (2020) 103884. DOI:10.1016/j.jmbbm.2020.10388410.1016/j.jmbbm.2020.103884 ↗
72. Thompson K.L., Williams M., Armes S.P., Colloidosomes: synthesis, properties and applications, Journal of Colloid and Interface Science, 447 (2015) 217–228. DOI:10.1016/j.jcis.2014.11.05810.1016/j.jcis.2014.11.058 ↗
73. Trache D., Hussin M.H., Haafiz M.K.M., Thakur V.K., Recent progress in cellulose nanocrystals: sources and production, Nanoscale, 9 (2017) 1763–1786. DOI:10.1039/C6NR09494E10.1039/C6NR09494E ↗
74. Tsuboi K., Yokota S., Kondo T., Difference between bamboo- and wood-derived cellulose nanofibers prepared by the aqueous counter collision method, Nordic Pulp & Paper Research Journal, 29 (2014) 69–76. DOI:10.3183/npprj-2014-29-01-p069-07610.3183/NPPRJ-2014-29-01-p069-076 ↗
75. Tsuji T., Tsuboi K., Yokota S., Tagawa S., Kondo T., Characterization of an amphiphilic Janus-type surface in the cellulose nanofibril prepared by aqueous counter collision, Biomacromolecules, 22 (2021) 620–628. DOI:10.1021/acs.biomac.0c0146410.1021/acs.biomac.0c01464 ↗
76. Tsujita Y., Kondo T., A building block of collagen fibrils demonstrated by sequential aqueous counter collision process, Journal of Fiber Science and Technology, 75 (2019) 112–118. DOI:10.2115/fiberst.2019-001410.2115/fiberst.2019-0014 ↗
77. Uetani K., Yano H., Nanofibrillation of wood pulp using a high-speed blender, Biomacromolecules, 12 (2011) 348–353. DOI:10.1021/bm101103p10.1021/bm101103p ↗
78. Utsunomiya H., Tsujita Y., Kondo T., Cellulose nanoanemone: an asymmetric form of nanocellulose, Cellulose, 29 (2022) 2899–2916. DOI:10.1007/s10570-021-04231-910.1007/s10570-021-04231-9 ↗
79. Walther A., Müller A.H.E., Janus particles, Soft Matter, 4 (2008) 663–668. DOI:10.1039/B718131K10.1039/b718131k ↗
80. Winey K.I., Vaia R.A., Polymer nanocomposites, MRS Bulletin, 32 (2007) 314–322. DOI:10.1557/mrs2007.22910.1557/mrs2007.229 ↗
81. Yabu H., Kanahara M., Shimomura M., Arita T., Harano K., Nakamura E., Higuchi T., Jinnai H., Polymer Janus particles containing block-copolymer stabilized magnetic nanoparticles, ACS Applied Materials & Interfaces, 5 (2013) 3262–3266. DOI:10.1021/am400314910.1021/am4003149 ↗
82. Yano H., Nakahara S., Bio-composites produced from plant microfiber bundles with a nanometer unit web-like network, Journal of Materials Science, 39 (2004) 1635–1638. DOI:10.1023/B:JMSC.0000016162.43897.0a10.1023/B:JMSC.0000016162.43897.0a ↗
83. Yano H., Nano Cellulose Vehicle Project, Ministry of the Environment of Japan (2016–2019). https://www.env.go.jp/press/103177.html
84. Yano H., Sugiyama J., Nakagaito A.N., Nogi M., Matsuura T., Hikita M., Handa K., Optically transparent composites reinforced with networks of bacterial nanofibers, Advanced Materials, 17 (2005) 153–155. DOI:10.1002/adma.20040059710.1002/adma.200400597 ↗
85. Ye W., Yokota S., Fan Y., Kondo T., A combination of aqueous counter collision and TEMPO-mediated oxidation for doubled carboxyl contents of α-chitin nanofibers, Cellulose, 28 (2021) 2167–2181. DOI:10.1007/s10570-021-03676-210.1007/s10570-021-03676-2 ↗
86. Yokota S., Kamada K., Sugiyama A., Kondo T., Pickering emulsion stabilization by using amphiphilic cellulose nanofibrils prepared by aqueous counter collision, Carbohydrate Polymers, 226 (2019) 115293. DOI:10.1016/j.carbpol.2019.11529310.1016/j.carbpol.2019.115293 ↗
87. Yokota S., Tagawa S., Kondo T., Facile surface modification of amphiphilic cellulose nanofibrils prepared by aqueous counter collision, Carbohydrate Polymers, 255 (2021) 117342. DOI:10.1016/j.carbpol.2020.11734210.1016/j.carbpol.2020.117342 ↗
88. Zhou Q., Greffe L., Baumann M.J., Malmström E., Teeri T.T., Brumer H., Use of xyloglucan as a molecular anchor for the elaboration of polymers from cellulose surfaces: a general route for the design of biocomposites, Macromolecules, 38 (2005) 3547–3549. DOI:10.1021/ma047712k10.1021/ma047712k ↗