A Review: Recent Progress on Evaluation of Flowability and Floodability of Powder
Source abstract
Abstract
Recent studies evaluating the flowability and floodability of cohesive powder under conditions of consolidation, mechanical force, vibrating force, fluid force, and floodability are reviewed. The ball indentation test is an effective method for evaluating the flowability of a small amount of cohesive powder at very low stress under consolidation conditions. The environmental conditions such as temperature and humidity play an important role in the flow of cohesive powder. With regard to cohesive powder flowing under mechanical force, the FT4 powder rheometer can evaluate the powder flowability using the total energy which is related to the shear stress on the impeller blade. The vibrating capillary method and the vibrating shear tube method are effective for the measurement of the flowability of strongly cohesive powder. The test using powder discharge by air flow can assess the flowability of cohesive powder which Carr’s flowability index is an equivalent level by using mass flow rate and interstitial air pressure. Finally, the flushing of cohesive powder occurs when the interstitial air pressure and the void fraction are high. The pressure difference between the interstitial air pressure and the outside of an orifice are the dominant factors in the spouting of powder.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Granular flow and fluidized beds · Fluid Dynamics and Heat Transfer · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, National Institute of Technology, Oita College, Japan
References (73)
Show source-provided references
1. Barletta D., Donsi G., Ferrari G., Poletto M., Russo P., Solid flow rate prediction in silo discharge of aerated cohesive powders, AIChE Journal, 53 (2007) 2240–2253.10.1002/aic.11212 ↗
2. Bharadwaj R., Ketterhagen W.R., Hancock B.C., Discrete element simulation study of a Freeman powder rheometer, Chemical Engineering Science, 65 (2010) 5747–5765.10.1016/j.ces.2010.04.002 ↗
3. Bruff W., Some characteristic qualities of powder materials, Journal of Engineering for Industry, Transactions of the ASME, 91 (1969) 323–328.10.1115/1.3591564 ↗
4. Bruni G., Colafigli A., Lettieri P., Elson T., Torque measurement in aerated powders using a mechanically stirred fluidized bed rheometer (msFBR), Chemical Engineering Research and Design, 83 (A11) (2005) 1311–1318.10.1205/cherd.05092 ↗
5. Bruni G., Lettieri P., Newton D., Barletta D., An investigation of the effect of the interparticle forces on the fluidization behaviour of fine powders linked with rheological studies, Chemical Engineering Science, 62 (2007a) 387–396.10.1016/j.ces.2006.08.059 ↗
6. Bruni G., Barletta D., Poletto M., Lettieri P., A rheological model for the flowability of aerated fine powders, Chemical Engineering Science, 62 (2007b) 397–407.10.1016/j.ces.2006.08.060 ↗
7. Calvert G., Curcic N., Redhead C., Ahmadian H., Owen C., Beckett D., Ghadiri M., A new environmental bulk powder caking tester, Powder Technology, 249 (2013) 323–329.10.1016/j.powtec.2013.08.037 ↗
8. Cannavacciuolo A., Barletta D., Donsi G., Ferrari G., Poletto M., Arch-free flow in aerated silo discharge of cohesive powders, Powder Technology, 191 (2009) 272–279.10.1016/j.powtec.2008.10.013 ↗
9. Carr R.L., Evaluating flow properties of solids, Chemical Engineering, 72 (1965a) 163–168.
10. Carr R.L., Classifying flow properties of solids, Chemical Engineering, 72 (1965b) 69–72.
11. Carr R.L., Properties of solids, Chemical Engineering, 13 (1969) 7–16.
12. Chen Q., Zafer U., Ghadiri M., Bi J., Assessment of surface caking of powders using the ball indentation method, International Journal of Pharmaceutics, 521 (2017) 61–68.10.1016/j.ijpharm.2017.02.033 ↗
13. De Jong J.A.H., Vertical air-controlled particle flow from a bunker through circular orifices, Powder Technology, 3 (1969/70) 279–286.10.1016/0032-5910(69)80095-1 ↗
14. De Jong J.A.H., Aerated solids flow through a vertical standpipe below a pneumatically discharged bunker, Powder Technology, 12 (1975a) 197–200.10.1016/0032-5910(75)85017-0 ↗
15. De Jong J.A.H., Hoelen Q.E.J.J.M., Cocurrent gas and particle flow during pneumatic discharge from a bunker through an orifice, Powder Technology, 12 (1975b) 201–208.10.1016/0032-5910(75)85018-2 ↗
16. Donsi G., Ferrari G., Poletto M., Russo P., Aggregative behavior of cohesive magnesium carbonate powders during fluidization and aerated discharge, KONA Powder and Particle Journal, 21 (2003) 54–65.10.14356/kona.2003009 ↗
17. Donsi G., Ferrari G., Poletto M., Russo P., Gas pressure measurement inside an aerated hopper, Chemical Engineering Research and Design, 82 (2004) 72–84.10.1205/026387604772803089 ↗
18. Freeman R., Measuring the flow properties of consolidation, conditioned and aerated powders—A comparative study using a powder rheometer and a rotational shear cell, Powder Technology, 174 (2007) 25–33.10.1016/j.powtec.2006.10.016 ↗
19. Geldart D., Types of gas fluidization, Powder Technology, 7 (1973) 285–292.10.1016/0032-5910(73)80037-3 ↗
20. Geldart D., Haesebrouck M., Studies on the intermittent discharge of coarse solids from fluidised beds, Chemical Engineering Research and Design, 61 (1983) 162–166.
21. Geldart D., Williams, J.C., Flooding from hoppers: identifying powder likely to give problem, aeration, Powder Technology, 43 (1985) 181–183.10.1016/0032-5910(85)87011-X ↗
22. Harada S., Li H., Funatsu K., Tomita Y., Spouting of fine powder from vertically vibrated bed, Chemical Engineering Science, 57 (2002) 779–787.10.1016/S0009-2509(01)00445-6 ↗
23. Harada S., Particle jet generated by an external force, Journal of Jet Flow Engineering, 21 (2004) 13–18.
24. Hare C., Zafer U., Ghadiri M., Freeman T., Clayton J., Murtagh M., Analysis of the dynamic of the FT 4 powder rheometer, Powder Technology, 285 (2015) 123–127.10.1016/j.powtec.2015.04.039 ↗
25. Hare C., Zafer U., Ghadiri M, Freeman T., Clayton J. Murtagh M., Correction to “Analysis of the dynamic of the FT4 powder rheometer” [Powder Technol. 285 (2015) 123–127], Powder Technology, 315 (2017) 37–38.10.1016/j.powtec.2017.02.061 ↗
26. Hassanpour A., Ghadiri M., Characterisation of flowability of loosely compacted cohesive powders by indentation, Particle & Particle Systems Characterization, 24 (2007) 117–123.10.1002/ppsc.200601111 ↗
27. Horio T., Yasuda M., Matsusaka S., Effect of particle shape on powder flowability of microcrystalline cellulose as determined using the vibration shear tube method, International Journal of Pharmaceutics, 473 (2014) 572–578.10.1016/j.ijpharm.2014.07.040 ↗
28. Ishii K., Suzuki M., Segawa T., Kihara Y., Yasuda M., Matsusaka S., Flowability measurement of pulverized and granulated materials using vibrating tube method, Advanced Powder Technology, 22 (2011a) 319–323.10.1016/j.apt.2010.04.002 ↗
29. Ishii K., Suzuki M., Segawa T., Kihara Y., Yasuda M., Matsusaka S., A vibrating tube method for evaluating flowability of a small amount of sample particles, Advanced Powder Technology, 22 (2011b) 522–525.10.1016/j.apt.2010.07.008 ↗
30. Jenike A.W., Quantitative design of mass-flow bins, Powder Technology, 1 (1967) 237–244.10.1016/0032-5910(67)80042-1 ↗
31. Jiang Y., Matsusaka S., Masuda H., Yokoyama T., Evaluation of flowability of composite particles and powder mixtures by a vibrating capillary method, Journal of Chemical Engineering of Japan, 39 (2006) 14–21.10.1252/jcej.39.14 ↗
32. Jiang Y., Matsusaka S., Masuda H., Qian Y., Development of measurement system for powder flowability based on vibrating capillary method, Powder Technology, 188 (2009) 242–247.10.1016/j.powtec.2008.05.003 ↗
33. Kuchii S., Tsutsumiya M., Funatsu K., Tomita Y., Interstitial fluid pressure and voidage in flushing phenomenon of fine powders, Advanced Powder Technology, 7 (1996) 41–49.10.1016/S0921-8831(08)60890-0 ↗
34. Kuchii S., Research on flushing phenomenon of powder, Ph.D. Thesis, Kyushu Institute of Technology, 1997.
35. Kuchii S, Tomita Y., Flushing phenomenon of fine powder, Powder Technology, 126 (2002) 275–282.10.1016/S0032-5910(02)00076-1 ↗
36. Leturia M., Benali M., Lagarde S., Ronga I, Saleh K., Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods, Powder Technology, 253 (2014) 406–423.10.1016/j.powtec.2013.11.045 ↗
37. Li M., Leturia M., Saleh K., Analysis of the periodic motion in a powder rheometer and development of a new flowability testing method, KONA Powder and Particle Journal, 35 (2018) 160–171. DOI: 2018002.10.14356/kona.2018002 ↗
38. Lloyd P.J., Webb P.J., The flooding of a powder—the importance of particle size distribution, Powder Technology, 51 (1987) 125–133.10.1016/0032-5910(87)80045-1 ↗
39. Martin P.D., Davidson J.F., Flow of powder through an orifice from a fluidized bed, Chemical Engineering Research and Design, 61 (1983) 225–232.
40. Matsusaka S., Yamamoto K., Masuda H., Micro-feeding of a fine powder using a vibrating capillary tube, Journal of the Society of Powder Technology, Japan, 32 (1995a) 83–88.10.4164/sptj.32.83 ↗
41. Matsusaka S., Urakawa M., Masuda H., Micro-feeding of fine powders using a capillary tube with ultrasonic vibration, Advanced Powder Technology, 6 (1995b) 283–293.10.1016/S0921-8831(08)60518-X ↗
42. Matsusaka S., Yamamoto K., Masuda H., Micro-feeding of a fine powder using a vibrating capillary tube, Advanced Powder Technology, 7 (1996) 141–151.10.1016/S0921-8831(08)60509-9 ↗
43. Nagashima H., Ishikura T., Identification of flow properties of fine powders based on dynamic flow characteristics obtained by stirring and aerating, Journal of the Society of Powder Technology, Japan, 52 (2015) 576–584.10.4164/sptj.52.576 ↗
44. Naito M. and Makino H., Shoho Kara Manabu Funtaigizyutsu (in Japanese), Morikita Shuppan, 2011. ISBN: 978-4-627-24181-7
45. Nan W., Ghadiri M., Wang Y., Analysis of powder rheometry of FT4: Effect of air flow, Chemical Engineering Science, 162 (2017) 141–151.10.1016/j.ces.2017.01.002 ↗
46. Ogata K., Spouting phenomenon of fluidized fine cohesive powder, Journal of the Society of Powder Technology, Japan, 45 (2008) 844–851.10.4164/sptj.45.844 ↗
47. Ogata K., Effect of initial void fraction and fluidized air flow on spouting of fine powder through an orifice, Journal of the Society of Powder Technology, Japan, 46 (2009) 187–196.10.4164/sptj.46.187 ↗
48. Ogata K., Miura S., Experimental investigation of cohesive fine powder discharge from an orifice using air flow, Proceedings of the 8th International Conference on Multiphase Flow 2013 (CD-ROM), Paper No.620 (2013) 1–5.
49. Ogata K., Miura S., Ouchi K., Utsunomiya Y., Ninomiya Y., Study on evaluation of flowability of cohesive powder using test of powder discharge by air flow, Journal of the Society of Powder Technology, Japan, 52 (2015) 714–722.10.4164/sptj.52.714 ↗
50. Ogata K., Ouchi K., Evaluation of flowability of cohesive powder using test of powder discharge by air flow, Journal of the Society of Powder Technology, Japan, 54 (2017) 460–469.10.4164/sptj.54.460 ↗
51. Pantaleev S., Yordanova S., Janda A., Marigo M., Ooi J.Y., An experimentally validated DEM study of powder mixing in a paddle blade mixer, Powder Technology, 311 (2017) 287–302.10.1016/j.powtec.2016.12.053 ↗
52. Pasha M., Hare C., Hassanpour A., Ghadiri M., Analysis of ball indentation on cohesive powder beds using distinct element modelling, Powder Technology, 233 (2013) 80–90.10.1016/j.powtec.2012.08.017 ↗
53. Rumpf H.C.H., Zur theorie der zugfestigkeit von agglomeraten bei kraftübertragung an kontaktpunkten, Chemie Ingenieur Technik, 42 (1970) 538–540.10.1002/cite.330420806 ↗
54. Rathbone T., Nedderman R.M., The deaeration of fine powders, Powder Technology, 51 (1987a) 115–124.10.1016/0032-5910(87)80044-X ↗
55. Rathbone T., Nedderman R.M., Devidson J.F., Aeration, deaeration, and flooding of the particles, Chemical Engineering Science, 42 (1987b) 725–736.10.1016/0009-2509(87)80032-5 ↗
56. Satoh M., Kondo N., Iwasaki T., Miyanami K., Okudaira Y., Ando H., The development of a rotary-intrusion-type rheometer for a powder bed and the measurement of the dynamic physical properties of powders, Journal of the Society of Powder Technology, Japan, 11 (1994) 783–788.10.4164/sptj.31.783 ↗
57. Schulze D., Discussion of testers and test procedures, in: Powders and Bulk Solids: Behavior, Characterization, Storage and Flow, Springer Berlin Heidelberg, Berlin, Heidelberg (2008) pp. 163–198.
58. Schwedes J., Review on testers for measuring flow properties of bulk solids, Granular Matter, 5 (2003) 1–45.10.1007/s10035-002-0124-4 ↗
59. Tashiro H., Ogata K., Wakamizu Y., Funatsu K., Tomita Y., Flushing phenomenon due to the impact force on the powder surface by free falling of particles, Proceedings of World Congress on Particle Technology 5 (CD-ROM), Paper No. 40a (2006a) 1–7.
60. Tashiro H., Ogata K., Wakamizu Y., Funatsu K., Tomita Y., Flushing phenomenon of fine powder due to the head, Proceeding of the 5th International Conference for Conveying and Handling of Particulate Solids (CD-ROM), Paper No. 96 (2006b) 1–6.
61. Thakur S.C., Ahmadian H, Sun J., Ooi J.Y., An experimental and numerical study of packing, compression, and caking behaviour of detergent powders, Particuology, 12 (2014) 2–12.10.1016/j.partic.2013.06.009 ↗
62. SPTJ (The Society of Powder Technology, Japan), Kisoutyuu no Ryuushi Bunsan Bunkyuu Bunri Sousa (in Japanese), Nikkan Kogyo Shinbunsha, Tokyo, 2006. ISBN: 978-4-526-05580-5
63. Tomita Y., Ikeuchi H., Kuchii S., Funatsu K., Flooding (“flushing”) of powder through a small orifice by an external load, Journal of Rheology, 38 (1994) 231–240.10.1122/1.550500 ↗
64. Tomasetta I., Barletta D., Lettieri P., Poletto M., The measurement of powder flow properties with a mechanically stirred aerated bed, Chemical Engineering Science, 69 (2012) 373–381.10.1016/j.ces.2011.10.056 ↗
65. Tsubaki J., New interpretation and application of Rumpf equation, Journal of the Society of Powder Technology, Japan, 21 (1984) 30–39.10.4164/sptj.21.30 ↗
66. Vasilenko A., Koynov S., Glasser B.J., Muzzio F.J., Role of consolidation state in the measurement of bulk density and cohesion, Powder Technology, 239 (2013) 366–37310.1016/j.powtec.2013.02.011 ↗
67. Wang C., Hassanpour A., Ghadiri M., Characterization of flow-ability cohesive powders by testing small quantities of weak compacts, Particuology, 6 (2008) 282–285.10.1016/j.partic.2008.05.004 ↗
68. Wilkinson S.K., Turnbull S.A., Yan Z., Stitt E.H., Morigo M., A parametric evaluation of powder flowability using a Freeman rheometer through statistical and sensitivity analysis: A discrete element method (DEM) study, Computers and Chemical Engineering, 97 (2017) 161–174.10.1016/j.compchemeng.2016.11.034 ↗
69. Yan Z., Wilkinson S.K., Stitt E.H., Marigo M., Investigating mixing and segregation using discrete element modelling (DEM) in the Freeman FT4 rheometer, International Journal of Pharmaceutics, 513 (2016) 38–48.10.1016/j.ijpharm.2016.08.065 ↗
70. Zainuddin M.I., Yasuda M., Liu Y., Maruyama H., Matsusaka S., Development of vibration shear tube method for powder flowability evaluation, Powder Technology, 217 (2012) 548–553.10.1016/j.powtec.2011.11.013 ↗
71. Zafar U., Hare C., Calvert G., Ghadiri M., Girimonte R., Formisani B., Quintanilla M.A.S., Velverde J.M., Comparison of cohesive powder flowability measured by Schuzle shear cell, Raining bed method, Sevilla powder tester and new Ball indentation method, Powder Technology, 286 (2015) 807–816.10.1016/j.powtec.2015.09.010 ↗
72. Zafar U., Hare C., Hassanpour A., Ghadiri M., Ball indentation on powder beds for assessing powder flowability: Analysis of operation window, Powder Technology, 310 (2017a) 300–306.10.1016/j.powtec.2017.01.047 ↗
73. Zafar U., Vivacqua V., Calvert G., Ghadiri M., Cleaver J.A.S., A review of bulk powder caking, Powder Technology, 313 (2017b) 389–401.10.1016/j.powtec.2017.02.024 ↗