journal article·2014Open access

Characterization of Oxide-Dispersion-Strengthened (ODS) Alloy Powders Processed by Mechano-Chemical-Bonding (MCB) and Balling Milling (BM)

Longzhou Ma, Bruce S.-J. Kang, Mary A. Alvin, C. C. Huang

KONA Powder and Particle Journal· Volume 31· Issue 0

Abstract

Two types of powder processing techniques, Mechano-Chemical-Bonding (MCB) and MCB plus ball-milling (BM) with reduced time, have been employed to process the nickel-based oxide-dispersion-strengthened (ODS) alloy powders with composition of Ni-20Cr-5A1-3W-1.5Y2O3 to explore the alternate routes for fabricating, homogenizing and mechanical alloying (MA) the ODS alloy powders, which are usually processed by a prolonged ball-milling or rod-milling technique. In order to examine and evaluate the microstructure, morphology, blending homogeneity and MA effect of alloying powders, the commercial ball-milled ODS MA 956 alloy powders and experimental alloy powders processed by MCB only and MCB plus BM were subjected to microscopic and spectroscopic characterization and analysis using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). A FIB (focus ion beam) lift-out technique was employed to prepare the TEM cross-section samples of processed powders. The results showed that the MCB plus BM with reduced time could produce the ODS alloying powders with homogeneous lamellate structure similar to MA 956 powders processed by conventional BM technique with a prolonged period of time. The ODS alloy powders processed by MCB plus BM are to be utilized to fabricate the bulk ODS alloy product in the further research phase.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Harry Reid Center for Environmental Studies, University of Nevada

Department of Mechanical and Aerospace Engineering, West Virginia University

US DOE National Energy Technology Laboratory

Hosokawa Micron Powder Systems

Funding

U.S. Department of Energy

References (18)

Show source-provided references
1. Busby J.T., Economic benefits of advanced materials in nuclear power systems, Journal of Nuclear Materials, 392 (2009) 301–306.10.1016/j.jnucmat.2009.03.018 ↗
2. Chou T.S., Bhadeshia H.K.D.H., Crystallographic texture in mechanically alloyed oxide dispersion-strengthened ma956 and ma957 steels, Metallurgical Transactions A, 24 (1993) 773–779.10.1007/BF02656499 ↗
3. Cullity B.D., Stock S.R., Elements of X-Ray Diffraction, 3rd ed., Prentice—Hall, New Jersey, 2001, pp. 174–177.
4. Du Pasquier A., Huang C.C., Spitler T., Nano Li4Ti5O12–LiMn2O4 batteries with high power capability and improved cycle-life, Journal of Power Sources, 186 (2009) 508–514.10.1016/j.jpowsour.2008.10.018 ↗
5. Giannuzzi L.A., Stevie F.A., A review of focused ion beam milling techniques for tem specimen preparation, Micron, 30 (1999) 197–204.10.1016/S0968-4328(99)00005-0 ↗
6. Gilman P.S., Benjamin J.S., Mechanical alloying, Annual Review of Materials Science, 13 (1983) 279–300.10.1146/annurev.ms.13.080183.001431 ↗
7. Haghi M., Anand L., High-temperature deformation mechanisms and constitutive equations for the oxide dispersion-strengthened superalloy ma 956, Metallurgical Transactions A, 21 (1990) 353–364.10.1007/BF02782415 ↗
8. Howson T.E., Mervyn D.A., Tien J.K., Creep and stress rupture of a mechanically alloyed oxide dispersion and precipitation strengthened nickel-base superalloy, Metallurgical Transactions A, 11 (1980) 1609–1616.10.1007/BF02654525 ↗
9. Kang B., Ogawa K., Ma L.-Z., Alvin M.A, Smith G., ODS coating development by cold spray method using powder mix prepared by combined MCB and ball milling processes, 24th Annual Conference on Fossil Energy Materials, Pittsburgh, PA, USA, May 25–27, 2010.
10. Murata K., Fukui T., Huang C.C., Naito M., Abe H., Nogi K., Composite powders processed by an advanced mechanical method for the fabrication of cermet anodes of solid oxide fuel cells, Journal of Chemical Engineering of Japan, 37 (2004) 568–571.10.1252/jcej.37.568 ↗
11. Nam J.G., Lee J.S., Mechano-chemical synthesis of nanosized stainless steel powder, Nanostructured Materials, 12 (1999) 475–478.10.1016/S0965-9773(99)00162-2 ↗
12. Odette G.R., Alinger M.J., Wirth B.D., Recent developments in irradiation-resistant steels, Annual Review of Materials Research, 38 (2008) 471–503.10.1146/annurev.matsci.38.060407.130315 ↗
13. Schäublin R., Ramar A., Baluc N., De Castro V., Monge M.A., Leguey T., Schmid N., Bonjour C., Microstructural development under irradiation in European ODS ferritic/martensitic steels, Journal of Nuclear Materials, 351 (2006) 247–260.10.1016/j.jnucmat.2006.02.005 ↗
14. Stevie F.A., Vartuli C.B., Giannuzzi L.A., Shofner T.L., Brown S.R., Rossie B., Hillion F., Mills R.H., Antonell M., Irwin R.B., Purcell B.M., Application of focused ion beam lift-out specimen preparation to TEM, SEM, STEM, AES and SIMS analysis, Surface and Interface Analysis, 31 (2001) 345–351.10.1002/sia.1063 ↗
15. Suryanarayana C., Recent developments in mechanical alloying, Reviews on Advanced Materials Science, 18 (2008) 203–211.
16. Suryanarayana C., Norton M.G., X-Ray Diffraction: A Practical Approach, Plenum Press, New York, 1998. pp. 207–221.10.1007/978-1-4899-0148-4_9 ↗
17. Ukai S., Nishida T., Okuda T., Yoshitake T., R&D of oxide dispersion strengthened ferritic martensitic steels for FBR, Journal of Nuclear Materials, 258–263, Part 2 (1998) 1745–1749.10.1016/S0022-3115(98)00241-4 ↗
18. Welham N.J., Willis P.E., Kerr T., Mechanochemical formation of metal–ceramic composites, Journal of the American Ceramic Society, 83 (2000) 33–40.10.1111/j.1151-2916.2000.tb01144.x ↗