Historical Review of Pneumatic Conveying
Source abstract
Abstract
This document attempts to cover the development of pneumatic conveying over the past 100 years or so. The individual researchers who worked in the field are highlighted along with their photograph which is included at the end of the document. As time progressed in the scientific and engineering developments of these years one see a transition from a purely experimental approach with considerable empiricism to adapt to the development of numerical procedures in attempt to predict the flow characteristics. The basic physics of the phenomena of pneumatic still is not completely understood and new and novel experimental techniques are always welcome in the field.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Granular flow and fluidized beds · Mineral Processing and Grinding · Belt Conveyor Systems Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Swanson School of Engineering, University of Pittsburgh, USA
References (63)
Show source-provided references
1. Agarwal V.K., Bharathi M.D., Mills D., The influence of particle size range on the pneumatic conveying of fly-ash, Powder Handling & Processing, 11 (1999) 197.
2. Agarwal V.K., Bharathi M.D., Mills D., The influence of material grade on pneumatic conveying system performance, Powder Handling & Processing, 12 (2000) 239–246.
3. Baker J.D., Performance analysis and control of dilute phase gas-solid systems employing neural networks and optimization techniques, Ph.D Dissertation, University of Pittsburgh, 1997.
4. Behera S., Das S., Desirable conveying characteristics for pneumatic transportation of flyash, sand, cement and crushed bath, Powder Handling & Processing, 12 (2000) 23–25.
5. Bohnet M., Gottschalk O., Morweiser M., Modern design of aerocyclones, Advanced Powder Technology, 8 (1997) 127–161.10.1016/S0921-8831(08)60472-0 ↗
6. Bunchatheeravate P., Fujii Y., Matsusaka S., Curtis J., Prediction of particle charging in a dilute pneumatic conveying system, AIChE Journal, 59 (2013) 2308–2316.10.1002/aic.14025 ↗
7. Cabrejos F.M., Transporte Neumatico, Editorial USM (2013).
8. Cabrejos F.M., Klinzing G.E., Solids mass flow rate measurements in pneumatic conveying, ASME Winter Annual Meeting, 92-WA/FE-3, Anaheim, CA. (1992).
9. Davies C., Gunabalan G., Effect of back to back bends on pressure loss in dilute phase pneumatic conveying, WCPT 3. (1998)
10. Davies C., Tallon S., X-ray measurement of voidage in a flat-bottom 2-D silo with central discharge, AIChE Meeting (ISBN: 978-0-8169-1086-1) (2014).
11. Davies C., Tallon S., Measurement of Flowrate of Particulate Solids, AIChE Meeting (ISBN: 978-0-8169-1094-6) (2015).
12. Deng T., Farnish R.J., Bradley M.S.A., Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system, Particulate Science and Technology, 26 (2008) 438–450.10.1080/02726350802367522 ↗
13. Fargette C., Jones M.G., Nussbaum G., Bench scale tests for the assessment of pneumatic conveying behaviour of powders, Powder Handling & Processing, 9 (1997) 103.
14. Gasterstadt J., Die experimentalle Untersuchung des pneumatischsen Fordervorganges, VDI, 68 (1924) 617–624.
15. Geldart D., Types of gas fluidization, Powder Tech, 7 (1973) 285–292.10.1016/0032-5910(73)80037-3 ↗
16. Guo Y., Curtis J., Discrete element method simulations for complex granular flows, Annual Review of Fluid Mechanics (2015) 21–46.10.1146/annurev-fluid-010814-014644 ↗
17. Guo Y., Wassgren C., Ketterhagen W., Hancock B., James B., Curtis J., A numerical study of granular shear flows of rod-like particles using the discrete element method, Journal of Fluid Mechanics, 713 (2012) 1–26.10.1017/jfm.2012.423 ↗
18. Han T., Levy A., Kalman H., DEM simulation for attrition of salt during dilute-phase pneumatic conveying, Powder Tech, 129 (2003) 92–100.10.1016/S0032-5910(02)00252-8 ↗
19. Johnson P.A., Jones M.G., Mills D., Investigation into the influence of gas density on pneumatic conveying performance, Powder Handling & Processing, 6 (1994) 157.
20. Jones M.G., Mills D., Product classification for pneumatic conveying, Powder Handling & Processing, 2 (1990) 117.
21. Kalman H., Attrition Control by Pneumatic Conveying, Powder Technology, 104 (1999) 214–220.10.1016/S0032-5910(99)00097-2 ↗
22. Kalman H., Goder D., Design criteria for particle attrition, Advanced Powder Technology, 9 (1998) 153–167.10.1016/S0921-8831(08)60584-1 ↗
23. Kalman H., Levy A., Brosch T., DEM simulation of particle attrition in dilute phase pneumatic conveying, Granular Matter, 13 (2011) 175–181.10.1007/s10035-010-0201-z ↗
24. Klinzing G.E., Clark W.W., Zhang M., Pahk J.B., Exploratory development of a microprobe for pneumatic conveying measurements and analysis, ChoPS 7, Friedrichshafen, Germany (2012).
25. Klinzing G.E., Rizk F., Marcus R.D., Leung S.L., Pneumatic conveying of solids, 3rd edition, Springer (2010).10.1007/978-90-481-3609-4 ↗
26. Konrad K., Harrison D., Nedderman R.M., Davidson J.F., Proc. of Pneumotransport 5. Paper D1, BHRA Fluid Engineering, Cranfield, Bedford, UK (1980) 225.
27. Krambrock W., Pneumatic conveying system, US Patent (1979) US4171925A.
28. Krambrock W., Paul Lubbehusen P., Method and apparatus for mixing loose material, US Patent (1980) US4194845A.
29. Krambrock W., Eberhard N., Device for pneumatic charging container-type balance, US Patent (1981) US4301880A.
30. Krambrock W., Device for closing a pipe branch, US Patent (1989) US4836250A.
31. Krambrock W., Rotary slide valve, US Patent (1991) US5072758A.
32. Krambrock W., Device for setting a prescribed gas quantity, US Patent (1995) US5397062A.
33. Krambrock W., Wilms H., Brar G.S., Loading apparatus for bulk materials, US Patent (1997) US5660215A.
34. Krambrock W., Elbow/countercurrent classifier, US Patent (1998) US5788083A.
35. Krambrock W., Wilms H., Method of blowing conveying conduits free of material after conveyance, US Patent (1998) US5704990A.
36. Krambrock W., Method for conveying a solid substance, US Patent (2005) US6971786B2.
37. Kuang S.B., Chu K.W., Yu A.B., Zou Z.S., Feng Y.Q., Computational investigation of horizontal slug flow in pneumatic conveying, Industrial & Engineering Chemistry Research, 47 (2008) 470–480.10.1021/ie070991q ↗
38. Kuang S.B., LaMarche C.Q., Curtis J., Yu A.B., Discrete particle simulation of jet induced cratering of a granular bed, Powder Technology, 239 (2013) 319–336.10.1016/j.powtec.2013.02.017 ↗
39. Lecreps I., Sommer K., Wolz K., Stress states and porosity within horizontal slug by dense-phase pneumatic conveying, Particulate Science and Tech, 27 (2009) 297–313.10.1080/02726350902990991 ↗
40. Levy A., Two-fluid approach for plug flow simulations in horizontal pneumatic conveying, Powder Tech., 112 (2000) 263–272.10.1016/S0032-5910(00)00301-6 ↗
41. Levy A., Jones M.G., Das S., An investigation into the performance of a suction nozzle, Powder Handling & Processing, 8 (1996) 337.
42. Mallick S.S., Wypych P.W., Pan R., Modeling dense-phase pneumatic conveying of powders using suspension density, Particulate Science and Technology, 31 (2013) 340–347.10.1080/02726351.2012.660271 ↗
43. Mason D.J., Levy A., A model for non-suspension gas-solids flow of fine powders in pipes, Int. J. Multiphase Flow, 27 (2001) 415–435.10.1016/S0301-9322(00)00033-1 ↗
44. Mason D.J., Marjanovic P., Levy A., A simulation system for pneumatic conveying systems, Powder Technology, 95 (1998) 7–14.10.1016/S0032-5910(97)03310-X ↗
45. Mason D.J., Marjanovic P., Levy A., The influence of bends on the performance of conveying systems, Advanced Powder Technology, 9 (1998) 197–206.10.1016/S0921-8831(08)60572-5 ↗
46. Matsusaka S., Masuda H., Electrostatics of particles, Advanced Powder Technology, 14 (2003) 143–166. DOI: 10.1163/15685520376359395810.1163/156855203763593958 ↗
47. Michaelides E.E., A model for the flow of solid particles in gases, Int. J. of Multiphase Flow, 10 (1984) 61.10.1016/0301-9322(83)90060-5 ↗
48. Mittal A., Mallick S.S., Wypych P.W., An Investigation into the transition of flow Mechanism during fluidized dense-phase pneumatic conveying of fine powders, Particulate Science and Technology, 34 (2016) 23–32.10.1080/02726351.2015.1038672 ↗
49. Molerus O., Principles of flow in disperse systems, ISBN-13 9780412406300, CRC Monograph (1993).
50. Muschelknautz E., Werkstoffforschung und Verfahrenstechnik unter Weltraumbegingungen, Bundesministerium fur Forschung und Technologie, Vorhaben: SN/A-QV-543 (Reibungsverluste FPL 304/a) (1985).
51. Muschelknautz E., Krambrock W., Vereinfachte Berechnung horizontaler pneumatischer Forderleitungen bei hoher Gutbeladung mit feinkornigen Produkten, Chemie-Ing.-Techn, 41 (1969) 1164.10.1002/cite.330412104 ↗
52. Nied C., Hauth D., Sommer K., Stress states and pressure loss in pneumatically conveyed spatially confined single plugs, ICBM, Newcastle, Australia DOI: 10.3850/978-981-07-2518-1_150. (2011).10.3850/978-981-07-2518-1_150 ↗
53. Rizk F., Pneumatische Förderung von Kunststoffgranulaten in horizontalen Rohrleitungen unter Berücksichtigung des Gewichtseinflusses in Zusammenhang mit Guteigenschaften und Rohrwerkstoffeigenschaften, insbesondere im optimalen Förderbereich Ph.D. Dissertation, University of Karlsruhe, 1973.
54. Roll C., Indiana One Hundred and fifty years of American development, Vol. 3, The Lewis Publishing Company, 1931.
55. Rose H.E., Duckworth R.A., Transport of solid particles in liquids and gases, The Engineer, 227 (1969) 392–396.
56. Setia G., Mallick S.S., Wypych P.W., On improving solid friction factor modeling for fluidized dense-phase pneumatic conveying systems, Powder Tech., 257 (2014) 88–103.10.1016/j.powtec.2014.02.006 ↗
57. Sheer T.J., Pneumatic conveying of ice particles through mine-shaft pipelines, Powder Tech., 5 (1995) 203.10.1016/0032-5910(95)03026-9 ↗
58. Theuerkauf J., Application of discrete element method simulations industry, 7th International CHoPS, Friedrichshaven, Germany (2012).
59. Tomita Y., Solids velocities and pressure drops in a horizontal pneumatic conveying system, Proc. 1st Intl. Conference on Pneumatic Transport of Solids in Pipe, BHRA, B3 (1971) 99–108.
60. Tsuji Y., Proceedings of the 5th World Congress on Particle Technology, Orlando, FL, USA, World Congress of Particle Technology—AIChE—Plenary Lecture—Paper 109 (2006).
61. Tsuji Y., Morikawa Y., LDV measurements in an air-solid two phase flow in a horizontal pipe, J. Fluid Mech, 120 (1982) 385–409.10.1017/S002211208200281X ↗
62. Wilson R.W., Sheer T.J., Erosion prediction in rotary regenerative boiler air preheaters. Proceedings of 2nd S. A Conference on Applied Mechanics, Cape Town, 1998.
63. Zenz F.A., Othmer D.F., Fluidization and Fluid Particle Systems, Reinhold (1960).