journal article·2021-01-10Open access

Recent Progress in Efficient Gas–Solid Cyclone Separators with a High Solids Loading for Large-scale Fluidized Beds

Chihiro Fushimi, Kentaro Yato, Mikio Sakai, Takashi Kawano, Teruyuki Kita

KONA Powder and Particle Journal· Volume 38· Issue 0

Abstract

Circulating fluidized beds (CFB)s are important technical equipment to treat gas–solid systems for fluid catalytic cracking, combustion, gasification, and high-temperature heat receiving because their mass and heat transfer rates are large. Cyclones are important devices to control the performance of CFBs and ensure their stable operation; heat-carrying and/or solid catalyst particles being circulated in a CFB should be efficiently separated from gas at a reduced pressure loss during separation. In commercial CFBs, a large amount of solids (> 1 kg-solid (m3-gas)−1 or > 1 kg-solid (kg-gas)−1) is circulated and should be treated. Thus, gas–solid cyclones with a high solids loading should be developed. A large number of reports have been published on gas–solid separators, including cyclones. In addition, computational fluid dynamics (CFD) technology has rapidly developed in the past decade. Based on these observations, in this review, we summarize the recent progress in experimental and CFD studies on gas–solid cyclones. The modified pressure drop model, scale-up methodology, and criteria for a single large cyclone vs. multiple cyclones are explained. Future research perspectives are also discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cyclone Separators and Fluid Dynamics · Granular flow and fluidized beds · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Tokyo University of Agriculture and Technology, Japan

Resilience Engineering Research Center, School of Engineering, The University of Tokyo, Japan

Project Center, TAKUMA Co., Ltd., Japan

Funding

Japan Society for the Promotion of Science

References (82)

Show source-provided references
1. Ahuja S.M., Wetted wall cyclone—A novel concept, Powder Technology, 204 (2010) 48–53. DOI: 10.1016/j.powtec.2010.07.00510.1016/j.powtec.2010.07.005 ↗
2. Ansart R., García-Triñanes P., Boissière B., Benoit H., Seville P.K.J., Simonin O., Dense gas-particle suspension upward flow used as heat transfer fluid in solar receiver: PEPT experiments and 3D numerical simulations, Powder Technology, 307 (2017) 25–36. DOI: 10.1016/j.powtec.2016.11.00610.1016/j.powtec.2016.11.006 ↗
3. Avci A., Karagoz I., Surmen A., Development of a new method for evaluating vortex length in reversed flow cyclone separators, Powder Technology, 235 (2013) 460–466. DOI: 10.1016/j.powtec.2012.10.05810.1016/j.powtec.2012.10.058 ↗
4. Bogodage S.G., Leung A.Y.T., CFD simulation of cyclone separators to reduce air pollution, Powder Technology, 286 (2015) 488–506. DOI: 10.1016/j.powtec.2015.08.02310.1016/j.powtec.2015.08.023 ↗
5. Chen J., Shi M., A universal model to calculate cyclone pressure drop, Powder Technology, 171 (2007) 184–191. DOI: 10.1016/j.powtec.2006.09.01410.1016/j.powtec.2006.09.014 ↗
6. Chu K.W., Chen J., Wang B., Yu A.B., Vince A., Barnett G.D., Barnett P.J., Understand solids loading effects in a dense medium cyclone: Effect of particle size by a CFD-DEM method, Powder Technology, 320 (2017) 594–609. DOI: 10.1016/j.powtec.2017.07.032.10.1016/j.powtec.2017.07.032 ↗
7. Chu K.W., Wang B., Xu D.L., Chen Y.X., Yu A.B., CFD-DEM simulation of the gas-solid flow in a cyclone separator, Chemical Engineering Science, 66 (2011) 834–847. DOI: 10.1016/j.ces.2010.11.02610.1016/j.ces.2010.11.026 ↗
8. Cocco R., Issangya A., Karri S.B.R., Freeman T., Jaeger H.M., Knowlton T.M., Small-scale particle interactions are having significant effects on global fluidized bed behavior, KONA Powder and Particle Journal, 34 (2017) 155–167. DOI: 10.14356/kona.201702110.14356/kona.2017021 ↗
9. Cortés C., Gil A., Modeling the gas and particle flow inside cyclone separators, Progress in Energy and Combustion Science, 33 (2007) 409–452. DOI: 10.1016/j.pecs.2007.02.00110.1016/j.pecs.2007.02.001 ↗
10. Demir S., A practical model for estimating pressure drop in cyclone separators: An experimental study, Powder Technology, 268 (2014) 329–338. DOI: 10.1016/j.powtec.2014.08.02410.1016/j.powtec.2014.08.024 ↗
11. De Souza F.J., Salvo R.D.V., Martins D.D.M., Simulation of the performance of small cyclone separators through the use of Post Cyclones (PoC) and annular overflow ducts, Separation and Purification Technology, 142 (2015a) 71–82. DOI: 10.1016/j.seppur.2014.12.03210.1016/j.seppur.2014.12.032 ↗
12. De Souza F.J., Salvo R.D.V., Martins D.D.M., Effects of the gas outlet duct length and shape on the performance of cyclone separators, Separation and Purification Technology, 142 (2015b) 90–100. DOI: 10.1016/j.seppur.2014.12.00810.1016/j.seppur.2014.12.008 ↗
13. Dewil R., Baeyens J., Caerts B., CFB cyclones at high temperature: Operational results and design assessment, Particuology, 6 (2008) 149–156. DOI: 10.1016/j.partic.2008.01.00210.1016/j.partic.2008.01.002 ↗
14. Fushimi C., Guan G., Nakamura Y., Ishizuka M., Tsutsumi A., Matsuda S., Hatano H., Suzuki Y., Hydrodynamic characteristics of a large-scale triple-bed combined circulating fluidized bed, Powder Technology, 209 (2011) 1–8. DOI: 10.1016/j.powtec.2011.01.01810.1016/j.powtec.2011.01.018 ↗
15. Fushimi C., Ishizuka M., Guan G., Suzuki Y., Norinaga K., Hayashi J.-i., Tsutsumi A., Hydrodynamic behavior of binary mixture of solids in a triple-bed combined circulating fluidized bed with high mass flux, Advanced Powder Technology, 25 (2014) 379–388. DOI: 10.1016/j.apt.2013.06.00710.1016/j.apt.2013.06.007 ↗
16. Gao Z., Wang J., Wang J., Mao Y., Wei Y., Analysis of the effect of vortex on the flow field of a cylindrical cyclone separator, Separation and Purification Technology, 211 (2019) 438–447. DOI: 10.1016/j.seppur.2018.08.02410.1016/j.seppur.2018.08.024 ↗
17. García-Triñanes P., Seville J.P.K., Ansart R., Benoit H., Leadbeater T.W., Parker D.J., Particle motion and heat transfer in an upward-flowing dense particle suspension: Application in solar receivers, Chemical Engineering Science, 177 (2018) 313–322. DOI: 10.1016/j.ces.2017.11.04110.1016/j.ces.2017.11.041 ↗
18. García-Triñanes P., Seville J.P.K., Boissière B., Ansart R., Leadbeater T.W., Parker D.J., Hydrodynamics and particle motion in upward flowing dense particle suspensions: Application in solar receivers, Chemical Engineering Science, 146 (2016) 346–356. DOI: 10.1016/j.ces.2016.03.006.10.1016/j.ces.2016.03.006 ↗
19. Guan G., Fushimi C., Tsutsumi A., Prediction of flow behavior of the riser in a novel high solids flux circulating fluidized bed for steam gasification of coal or biomass, Chemical Engineering Journal, 164 (2010) 221–229. DOI: 10.1016/j.cej.2010.08.00510.1016/j.cej.2010.08.005 ↗
20. Guan G., Fushimi C., Ishizuka M., Nakamura Y., Tsutsumi A., Matsuda S., Suzuki Y., Hatano H., Cheng Y., Chuan Lim E.W., Wang C.H., Flow behaviors in the downer of a large-scale triple-bed combined circulating fluidized bed system with high solids mass fluxes, Chemical Engineering Science, 66 (2011) 4212–4220. DOI: 10.1016/j.ces.2011.06.00610.1016/j.ces.2011.06.006 ↗
21. Haig C.W., Hursthouse A., McIlwain S., Sykes D., The effect of particle agglomeration and attrition on the separation efficiency of a Stairmand cyclone, Powder Technology, 258 (2014) 110–124. DOI: 10.1016/j.powtec.2014.03.00810.1016/j.powtec.2014.03.008 ↗
22. Hsiao T.C., Huang S.H., Hsu C.W., Chen C.C., Chang P.K., Effects of the geometric configuration on cyclone performance, Journal of Aerosol Science, 86 (2015) 1–12. DOI: 10.1016/j.jaerosci.2015.03.00510.1016/j.jaerosci.2015.03.005 ↗
23. Huang A.N., Ito K., Fukasawa T., Fukui K., Kuo H.P., Effects of particle mass loading on the hydrodynamics and separation efficiency of a cyclone separator, Journal of the Taiwan Institute of Chemical Engineers, 90 (2018a) 61–67. DOI: 10.1016/j.jtice.2017.12.01610.1016/j.jtice.2017.12.016 ↗
24. Huang A.N., Ito K., Fukasawa T., Yoshida H., Kuo H.P., Fukui K., Classification performance analysis of a novel cyclone with a slit on the conical part by CFD simulation, Separation and Purification Technology, 190 (2018b) 25–32. DOI: 10.1016/j.seppur.2017.08.04710.1016/j.seppur.2017.08.047 ↗
25. Huang A.N., Maeda N., Shibata D., Fukasawa T., Yoshida H., Kuo H.P., Fukui K., Influence of a laminarizer at the inlet on the classification performance of a cyclone separator, Separation and Purification Technology, 174 (2017a) 408–416. DOI: 10.1016/j.seppur.2016.09.05310.1016/j.seppur.2016.09.053 ↗
26. Huang A.N., Maeda N., Sunada S., Fukasawa T., Yoshida H., Kuo H.P., Fukui K., Effect of cold air stream injection on cyclone performance at high temperature, Separation and Purification Technology, 183 (2017b) 293–303. DOI: 10.1016/j.seppur.2017.04.01210.1016/j.seppur.2017.04.012 ↗
27. Huard M., Briens C., Berruti F., Gauthier T.A., A review of rapid gas-solid separation techniques, International Journal of Chemical Reactor Engineering, 8 (2010) 1–72. DOI: 10.2202/1542-6580.206910.2202/1542-6580.2069 ↗
28. Jang K., Lee G.G., Huh K.Y., Evaluation of the turbulence models for gas flow and particle transport in URANS and LES of a cyclone separator, Computers and Fluids, 172 (2018) 274–283. DOI: 10.1016/j.compfluid.2018.04.03210.1016/j.compfluid.2018.04.032 ↗
29. Jiang Y., Qiu G., Wang H., Modelling and experimental investigation of the full-loop gas-solid flow in a circulating fluidized bed with six cyclone separators, Chemical Engineering Science, 109 (2014) 85–97. DOI: 10.1016/j.ces.2014.01.02910.1016/j.ces.2014.01.029 ↗
30. Karagoz I., Avci A., Surmen A., Sendogan O., Design and performance evaluation of a new cyclone separator, Journal of Aerosol Science, 59 (2013) 57–64. DOI: 10.1016/j.jaerosci.2013.01.01010.1016/j.jaerosci.2013.01.010 ↗
31. Kozołub P., Klimanek A., Białecki R.A., Adamczyk W.P., Numerical simulation of a dense solid particle flow inside a cyclone separator using the hybrid Euler–Lagrange approach, Particuology, 31 (2017) 170–180. DOI: 10.1016/J.PARTIC.2016.09.00310.1016/j.partic.2016.09.003 ↗
32. Lee H., Yook S.J., Cyclone performance on removing fibrous particles generated from terry-towels and cotton clothes, Powder Technology, 262 (2014) 36–41. DOI: 10.1016/j.powtec.2014.04.05710.1016/j.powtec.2014.04.057 ↗
33. Lettieri P., Macrì D., Effect of process conditions on fluidization, KONA Powder and Particle Journal, 33 (2016) 86–108. DOI: 10.14356/kona.201601710.14356/kona.2016017 ↗
34. Li C-Y., Zhang L-X.,Kudo S., Hayashi J-i., Norinaga K., Toward low-temperature coal gasification: Experimental and numerical studies of thermochemical coal conversion considering the interactions between volatiles and char particles, KONA Powder and Particle Journal, 34 (2017) 70–79. DOI: 10.14356/kona.201700810.14356/kona.2017008 ↗
35. Li S., Yang H., Wu Y., Zhang H., Improved cyclone pressure drop model at high inlet solid concentrations, Chemical Engineering and Technology, 34 (2011) 1507–1513. DOI: 10.1002/ceat.20110008710.1002/ceat.201100087 ↗
36. Liao L., Na Y.J., Lu Q.G., Sun Y.K., Wang H.G. Experimental study on a circulating fluidized bed with six cyclone separators. In: Proceedings of the CSEE. 31 (2011) 11–16.
37. Liu F., Chen J.Y., Zhang A.Q., Wang X.D., Dong T., Performance and flow behavior of four identical parallel cyclones, Separation and Purification Technology, 134 (2014) 147–157. DOI: 10.1016/j.seppur.2014.07.03010.1016/j.seppur.2014.07.030 ↗
38. Masnadi M.S., Grace J.R., Elyasi S., Bi X., Distribution of multi-phase gas-solid flow across identical parallel cyclones: Modeling and experimental study, Separation and Purification Technology, 72 (2010) 48–55. DOI: 10.1016/j.seppur.2009.12.02710.1016/j.seppur.2009.12.027 ↗
39. Mazyan W.I., Ahmadi A., Ahmed H., Hoorfar M., Increasing efficiency of natural gas cyclones through addition of tangential chambers, Journal of Aerosol Science, 110 (2017) 36–42. DOI: 10.1016/j.jaerosci.2017.05.00710.1016/j.jaerosci.2017.05.007 ↗
40. Mirek P., Influence of the model scale on hydrodynamic scaling in CFB boilers, Brazilian Journal of Chemical Engineering, 33 (2016) 885–896. DOI: 10.1590/0104-6632.20160334s2015034810.1590/0104-6632.20160334s20150348 ↗
41. Mirek P., The impact of scaling rules on parameters of the cyclone working with CFB boilers, Fuel Processing Technology, 169 (2018) 71–76. DOI: 10.1016/j.fuproc.2017.09.01210.1016/j.fuproc.2017.09.012 ↗
42. Misiulia D., Andersson A.G., Lundström T.S., Effects of the inlet angle on the flow pattern and pressure drop of a cyclone with helical-roof inlet, Chemical Engineering Research and Design, 102 (2015) 307–321. DOI: 10.1016/j.cherd.2015.06.03610.1016/j.cherd.2015.06.036 ↗
43. Mo X.,Cai R., Huang X., Zhang M., Yang H., The effects of wall friction and solid acceleration on the mal-distribution of gas-solid flow in double identical parallel cyclones, Powder Technology, 286 (2015) 471–477. DOI: 10.1016/j.powtec.2015.08.01710.1016/j.powtec.2015.08.017 ↗
44. Muschelknautz E. Die Berechnung von Zyklonabscheidern für Gase, Chemie Ingenieur Technik, 44 (1972) 63–71. DOI: 10.1002/cite.33044011210.1002/cite.330440112 ↗
45. Nowak W., Mirek P., Chapter 16. Circulating fluidized bed combustion (CFBC), in: F. Scala (Eds.), Fluidized Bed Technologies for Near-zero Emission Combustion and Gasification. Woodhead Publishing, Cambridge, 2013, pp.701–764. ISBN: 9780857095411.10.1533/9780857098801.3.701 ↗
46. Oh J.,Choi S., Kim J., Lee S., Jin G., Particle separation with the concept of uniflow cyclone, Powder Technology, 254 (2014) 500–507. DOI: 10.1016/j.powtec.2014.01.05710.1016/j.powtec.2014.01.057 ↗
47. Pecate S., Morin M., Kessas S.A., Hemati M., Kara Y., Valin S., Hydrodynamic study of a circulating fluidized bed at high temperatures: Application to biomass gasification, KONA Powder and Particle Journal, 36 (2019) 271–293. DOI: 10.14356/kona.201901810.14356/kona.2019018 ↗
48. Prabhansu, Rajmistry S., Ganguli S., Chandra P., Karmakar M.K., Chatterjee P.K., Numerical analysis of gas-solid behavior in a cyclone separator for circulating fluidized bed system, Journal of Applied Fluid Mechanics, 10 (2017) 1167–1176. DOI: 10.18869/acadpub.jafm.73.241.2695110.18869/acadpub.jafm.73.241.26951 ↗
49. Qiu Y., Deng B., Kim C.N., Numerical study of the flow field and separation efficiency of a divergent cyclone, Powder Technology, 217 (2012) 231–237. DOI: 10.1016/j.powtec.2011.10.03110.1016/j.powtec.2011.10.031 ↗
50. Safikhani H., Mehrabian P., Numerical study of flow field in new cyclone separators, Advanced Powder Technology, 27 (2016) 379–387. DOI: 10.1016/j.apt.2016.01.01110.1016/j.apt.2016.01.011 ↗
51. Safikhani H., Zamani J., Musa M., Numerical study of flow field in new design cyclone separators with one, two and three tangential inlets, Advanced Powder Technology, 29 (2018) 611–622. DOI: 10.1016/j.apt.2017.12.00210.1016/j.apt.2017.12.002 ↗
52. Scala F. (Ed.), Fluidized Bed Technologies for Near-zero Emission Combustion and Gasification. Woodhead Publishing, Cambridge, 2013. ISBN: 9780857095411.10.1533/9780857098801 ↗
53. Schneiderbauer S., Haider M.F., Hauzenberger F., Pirker S.A, Lagrangian-Eulerian hybrid model for the simulation of industrial-scale gas-solid cyclones, Powder Technology, 304 (2016) 229–240. DOI: 10.1016/j.powtec.2016.07.064.10.1016/j.powtec.2016.07.064 ↗
54. Shao Y., Zhang Y., Wang X., Wang X., Jin B., Liu H., Three-dimensional full loop modeling and optimization of an in situ gasification chemical looping combustion system, Energy and Fuels, 31 (2017) 13859–13870. DOI: 10.1021/acs.energyfuels.7b0211910.1021/acs.energyfuels.7b02119 ↗
55. Shi B., Wei J., Chen P., 3D turbulent flow modeling in the separation column of a circumfluent cyclone, Powder Technology, 235 (2013) 82–90. DOI: 10.1016/j.powtec.2012.10.00910.1016/j.powtec.2012.10.009 ↗
56. Shuai D., Wang X., Lyu Q., Hydrodynamics in a circulating fluidized bed with annular furnace and six parallel cyclones, Journal of Thermal Science, 26 (2017) 273–281. DOI: 10.1007/s11630-017-0939-210.1007/s11630-017-0939-2 ↗
57. Siadaty M., Kheradmand S., Ghadiri F., Improvement of the cyclone separation efficiency with a magnetic field, Journal of Aerosol Science, 114 (2017) 219–232. DOI: 10.1016/j.jaerosci.2017.09.01510.1016/j.jaerosci.2017.09.015 ↗
58. Song J., Wei Y., Sun G., Chen J., Experimental and CFD study of particle deposition on the outer surface of vortex finder of a cyclone separator, Chemical Engineering Journal, 309 (2017) 249–262. DOI: 10.1016/j.cej.2016.10.01910.1016/j.cej.2016.10.019 ↗
59. Stolten D., Scherer V. (Eds.), Efficient Carbon Capture for Coal Power Plants, Wiley-VCH, Weinheim, 2011. ISBN: 9783527330027.
60. Su Y.,Zheng A., Zhao B., Numerical simulation of effect of inlet configuration on square cyclone separator performance, Powder Technology, 210 (2011) 293–303. DOI: 10.1016/j.powtec.2011.03.03410.1016/j.powtec.2011.03.034 ↗
61. Sun X., Kim S., Yang S.D., Kim H.S., Yoon J.Y., Multi-objective optimization of a Stairmand cyclone separator using response surface methodology and computational fluid dynamics, Powder Technology, 320 (2017) 51–65. DOI: 10.1016/j.powtec.2017.06.06510.1016/j.powtec.2017.06.065 ↗
62. Surmen A., Avci A., Karamangil M.I., Prediction of the maximum-efficiency cyclone length for a cyclone with a tangential entry, Powder Technology, 207 (2011) 1–8. DOI: 10.1016/j.powtec.2010.10.00210.1016/j.powtec.2010.10.002 ↗
63. Van de Velden M., Baeyens J., Dougan B., McMurdo A., Investigation of operational parameters for an industrial CFB combustor of coal, biomass and sludge, China Particuology, 5 (2007) 247–254. DOI: 10.1016/j.cpart.2007.05.00110.1016/j.cpart.2007.05.001 ↗
64. Wang F.J., Song G.L., Wang X.F., Liu Z.C., Sun Y.K., Lu Q.G., Cold experimental study on a CFB with four cyclone separators on the same side, Power System Engineering, 30 (2014) 17–19.
65. Wang J., Guo Y., Pan J., Grade-efficiency modeling and robust parameter design for gas-solids cyclone separators, Powder Technology, 345 (2019) 457–467. DOI: 10.1016/j.powtec.2019.01.02010.1016/j.powtec.2019.01.020 ↗
66. Wang S., Luo K., Hu C., Fan J., CFD-DEM study of the effect of cyclone arrangements on the gas-solid flow dynamics in the full-loop circulating fluidized bed, Chemical Engineering Science, 172 (2017) 199–215. DOI: 10.1016/j.ces.2017.05.05210.1016/j.ces.2017.05.052 ↗
67. Wang W., Zhang P., Wang L., Chen G., Li J., Li X., Structure and performance of the circumfluent cyclone, Powder Technology, 200 (2010) 158–163. DOI: 10.1016/j.powtec.2010.02.02010.1016/j.powtec.2010.02.020 ↗
68. Wang X., Jin B., Liu H., Wang W., Liu X., Zhang Y., Optimization of in situ gasification chemical looping combustion through experimental investigations with a cold experimental system, Industrial and Engineering Chemistry Research, 54 (2015) 5749–5758. DOI: 10.1021/acs.iecr.5b0047110.1021/acs.iecr.5b00471 ↗
69. Wasilewski M., Brar L.S., Optimization of the geometry of cyclone separators used in clinker burning process: A case study, Powder Technology, 313 (2017) 293–302. DOI: 10.1016/j.powtec.2017.03.02510.1016/j.powtec.2017.03.025 ↗
70. Wei J., Zhang H., Wang Y., Wen Z., Yao B., Dong J., The gas-solid flow characteristics of cyclones, Powder Technology, 308 (2017) 178–192. DOI: 10.1016/j.powtec.2016.11.04410.1016/j.powtec.2016.11.044 ↗
71. Wei Z.G., Yan C.Y., Jia M. Da, Song J.F., Wei Y.D., Experimental analysis of pressure characteristics of catalyst powder flowing down a cyclone dipleg, Petroleum Science, 13 (2016) 348–355. DOI: 10.1007/s12182-016-0087-410.1007/s12182-016-0087-4 ↗
72. Winfield D., Cross M., Croft N., Paddison D., Craig I., Performance comparison of a single and triple tangential inlet gas separation cyclone: A CFD Study, Powder Technology, 235 (2013) 520–531. DOI: 10.1016/j.powtec.2012.10.02610.1016/j.powtec.2012.10.026 ↗
73. Wu X.,Liu J., Xu X., Xiao Y., Modeling and experimental validation on pressure drop in a reverse-flow cyclone separator at high inlet solid loading, Journal of Thermal Science, 20 (2011) 343–348. DOI: 10.1007/s11630-011-0479-010.1007/s11630-011-0479-0 ↗
74. Xiong Z., Ji Z., Wu X., Development of a cyclone separator with high efficiency and low pressure drop in axial inlet cyclones, Powder Technology, 253 (2014) 644–649. DOI: 10.1016/j.powtec.2013.12.01610.1016/j.powtec.2013.12.016 ↗
75. Xu W., Li Q., Wang J., Jin Y., Performance evaluation of a new cyclone separator—Part II simulation results, Separation and Purification Technology, 160 (2016) 112–116. DOI: 10.1016/j.seppur.2016.01.01210.1016/j.seppur.2016.01.012 ↗
76. Yang J., Sun G., Zhan M., Prediction of the maximum-efficiency inlet velocity in cyclones, Powder Technology, 286 (2015) 124–131. DOI: 10.1016/j.powtec.2015.07.02410.1016/j.powtec.2015.07.024 ↗
77. Yoshida H., Nishimura Y., Fukui K., Yamamoto T., Effect of apex cone shape on fine particle classification of gas-cyclone, Powder Technology, 204 (2010) 54–62. DOI: 10.1016/j.powtec.2010.07.00610.1016/j.powtec.2010.07.006 ↗
78. Yu X.,Blanco P.H., Makkawi Y., Bridgwater A.V., CFD and experimental studies on a circulating fluidised bed reactor for biomass gasification, Chemical Engineering and Processing—Process Intensification, 130 (2018) 284–295. DOI: 10.1016/j.cep.2018.06.01810.1016/j.cep.2018.06.018 ↗
79. Zhang C., Wang Q., Jia Z., Muhammad U., Qian W., Wei F., Design of parallel cyclones based on stability analysis, AIChE Journal, 62 (2016) 4251–4258. DOI: 10.1002/aic.1536610.1002/aic.15366 ↗
80. Zhang N., Lu B., Wang W., Li J., 3D CFD simulation of hydrodynamics of a 150MWe circulating fluidized bed boiler, Chemical Engineering Journal, 162 (2010) 821–828. DOI: 10.1016/j.cej.2010.06.03310.1016/j.cej.2010.06.033 ↗
81. Zhang P., Chen G., Duan J., Wang W., Experimental evaluation of separation performance of fine particles of circulatory circumfluent cyclone separator system, Separation and Purification Technology, 210 (2019) 231–235. DOI: 10.1016/j.seppur.2018.08.00810.1016/j.seppur.2018.08.008 ↗
82. Zhou X., Cheng L., Wang Q., Luo Z., Cen K., Non-uniform distribution of gas-solid flow through six parallel cyclones in a CFB system: An experimental study, Particuology, 10 (2012) 170–175. DOI: 10.1016/j.partic.2011.10.00610.1016/j.partic.2011.10.006 ↗