journal article·2018Open access

Simulation of Mechanical Degradation of Iron Ore Pellets in a Direct Reduction Furnace

Fernando O. Boechat, Rodrigo M. de Carvalho, Luís Marcelo Tavares

KONA Powder and Particle Journal· Volume 35· Issue 0

Abstract

The increase in production of steel in electric arc furnaces in recent years influenced directly the world production of direct reduction iron (DRI). Amongst the most widely used technologies for DRI production is the MIDREX process. The behavior of the metallic charge used in these furnaces, mainly made up of iron ore pellets, influences directly their productivity. Fines contained in the feed are typically removed by screening, in order to prevent them from impacting negatively the productivity of the furnace. However, fines still may be generated inside the furnace as a result of the collisions amongst pellets and between them and internals of the furnace as they move downwards from the feed to the discharge of the shaft furnace. Predicting and preventing such mechanical degradation is critical in the furnace operation. The present work deals with the prediction of degradation of iron ore pellets during reduction in a MIDREX furnace. Collision energies involved in the vertical flow of pellets along a MINIMOD MIDREX direct reduction furnace were estimated using the discrete element method. Using this technique along with a model of degradation that considered assumptions based on information from the literature it was possible to estimate the proportion of fines generated inside the reactor, which was consistent with plant practice. Finally, it was predicted that the generation of fines in the reduction zone of the furnace would vary from 3.4 % to 4.6 % as the throughput of the furnace increased in 50 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mineral Processing and Grinding · Iron and Steelmaking Processes · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Universidade Federal do Rio de Janeiro – COPPE/UFRJ, Brazil

Funding

Conselho Nacional de Desenvolvimento Científico e Tecnológico · Vale S.A.

References (15)

Show source-provided references
1. Atsushi M., Uemura H., Sakaguchi T., MIDREX Processes, KOBELCO TECHNOLOGY REVIEW, 29 (2010) 50–57.
2. Barrios G.K.P., Carvalho R.M., Kwade A., Tavares L.M., Contact parameter estimation for DEM simulation of iron ore pellet handling, Powder Technology, 248 (2013) 84–93.10.1016/j.powtec.2013.01.063 ↗
3. Basdag A., Arol A.I., Coating of iron oxide pellets for direct reduction, Scandinavian Journal of Metallurgy, 31 (2002) 229–233.10.1034/j.1600-0692.2002.310310.x ↗
4. Cavalcanti P.P.S., Calibration and validation of a mathematical model of degradation of fired pellets during transportation and handling, M.Sc. thesis, Universidade Federal do Rio de Janeiro, 2015 (in Portuguese).
5. Carvalho R.M., Mechanistic modeling of semi-autogenous grinding, Ph.D thesis, Universidade Federal do Rio de Janeiro, 2013.
6. Ghadiri M., Zhang Z., Impact attrition of particulate solids. Part 1: A theoretical model of chipping, Chemical Engineering Science, 57 (2002) 3659–3669.10.1016/S0009-2509(02)00240-3 ↗
7. Huang Z., Yi L., Jiang T., Mechanisms of strength decrease in the initial reduction of iron ore oxide pellets, Powder Technology, 221 (2012) 284–291.10.1016/j.powtec.2012.01.013 ↗
8. MIDREX, Direct from Midrex–3rd/4th Quarter 2011, Midrex Technologies, Inc., p. 9, 2011, accessed 15.08.2013.
9. MIDREX, World direct reduction statistics, Midrex Technologies, Inc., p. 14, 2015, accessed 10.05.2016.
10. MIDREX, Shaft Furnace Technologies—Solutions for Steelmakers, Midrex Technologies, Inc., p. 10, 2014, accessed 10.05.2016.
11. Parisi D.R., Laborde M.A., Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore, Chemical Engineering Journal, 104 (2004) 35–43.10.1016/j.cej.2004.08.001 ↗
12. Tavares L.M., Carvalho R.M., Modeling ore degradation during handling using continuum damage mechanics, International Journal of Mineral Processing, 101 (2011) 21–27.10.1016/j.minpro.2010.07.008 ↗
13. Tavares L.M., Carvalho R.M., Pereira H.C., Bianchi M.R., Otaviano M.M., Predicting iron ore pellet degradation due to handling from pellet plant to steel mill, Proc. 2nd European Steel Technology and Application Days, Düsseldorf, 2015.
14. Weerasekara N.S., Powell M.S., Cleary P.S., Tavares L.M., Evertsson M., Morrison R.D., Quist J., Carvalho R.M., The contribution of DEM to the science of comminution, Powder Technology, 248 (2013) 3–24.10.1016/j.powtec.2013.05.032 ↗
15. Wong P.L.M., Kim M.J., Kim H.S., Choi C.H., Sticking behaviour in direct reduction of iron ore, Ironmaking & Steelmaking, 26 (1999) 53–57.10.1179/030192399676942 ↗