Characterisation of the Wetting Behaviour of Poor Wetting Food Powders and the Influence of Temperature and Film Formation
Source abstract
Abstract
Characterisation of the wettability of five poor wetting food powders was performed using static immersion and contact angle measurements. The effect of temperature (20, 50 and 70 °C) on wettability showed varying effects on the powders. Higher temperatures majorly improved the wettability of chocolate and high fat powders but worsened the wettability of sodium caseinate and milk protein isolate. Rate-limiting regime testing was performed by pouring a fixed mass of powder on to the surface of water in an agitated beaker and visually assessing what was rate-limiting rehydration after 1 minute. The rate limiting regime tended to be floating at lower agitation speeds and dispersed clumps of varying sizes at higher speeds. However, there were major differences observed between the powders. Some of the powders formed strong films at powder/water interfaces, that could act as a barrier to water penetration and wettability. Consequently, force displacement testing was performed on a layer of powder on the water surface to assess the strength of any powder film formed. Some of the powders formed strong films that may in-part explain their poor wetting behaviour and their propensity to form strong clumps that were difficult to disrupt.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microencapsulation and Drying Processes · Pickering emulsions and particle stabilization · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Process & Chemical Engineering, School of Engineering, University College Cork, Ireland
Teagasc Food Research Centre, Moorepark, Ireland
References (19)
Show source-provided references
1. Barbosa-Canovas G.V., Ortega-Rivas E., Juliano P., Yan H., Bulk properties, in: Food Powders: Physical Properties, Processing, and Functionality, Kluwer Academic/Plenum Publishers, New York, 2005.
2. Crowley S.V., Desautel B., Gazi I., Kelly A.L., Huppertz T., O’Mahony J.A., Rehydration characteristics of milk protein concentrate powders, J. Food Engineering, 149 (2015) 105–113.10.1016/j.jfoodeng.2014.09.033 ↗
3. Dupas J., Verneuil E., Ramaioli M., Forny L., Talini L., Lequeux F., Dynamic wetting on a thin film of soluble polymer: Effects of nonlinearities in the sorption isotherm, Langmuir, 29 (2013) 12572–12578.10.1021/la402157d ↗
4. Fennema O., Ed, Food Chemistry, Marcel Dekker, New York, 1985.
5. Fitzpatrick J.J., van Lauwe A., Coursol M., O’Brien A., Fitzpatrick K.L., Ji J., Miao S., Investigation of the rehydration behaviour of food powders by comparing the behaviour of twelve powders with different properties, Powder Technology, 297 (2016) 340–348.10.1016/j.powtec.2016.04.036 ↗
6. Gaiani C., Schuck P., Scher S., Desobry S., Banon S., Dairy powder rehydration: Influence of protein state, incorporation mode, and agglomeration, J. Dairy Science, 90 (2007) 570–581.10.3168/jds.S0022-0302(07)71540-0 ↗
7. Gaiani C., Schuck P., Scher S., Desobry S., Banon S., Use of a turbidity sensor to determine dairy powder rehydration properties, Powder Technology, 190 (2009) 2–5.10.1016/j.powtec.2008.04.042 ↗
8. Gaiani C., Morand M., Sanchez C., Arab Tehrany E., Jacquot M., Schuck P., Jeantet R., Scher S., How surface composition of high milk protein powders is influenced by spray drying temperature, Colloids and Surfaces B: Biointerfaces, 75 (2010) 377–384.10.1016/j.colsurfb.2009.09.016 ↗
9. IDF, International IDF Standard 87: 1979. International Dairy Federation, Brussels, Belgium, 1979.
10. Jeantet R., Schuck P., Six T., Andre C., Delaplace G., The influence of stirring speed, temperature and solid concentration on the rehydration time of micellar casein powder, Dairy Science and Technology, 90 (2010) 225–236.10.1051/dst/2009043 ↗
11. Ji J., Fitzpatrick J., Cronin K., Maguire P., Zhang H., Miao S., Rehydration behaviours of high protein dairy powders: The influence of agglomeration on wettability, dispersibility and solubility, Food Hydrocolloids, 58 (2016) 194–203.10.1016/j.foodhyd.2016.02.030 ↗
12. Kim E.H.J., Chen X.D., Pearce D., Surface characterization of four industrial spray-dried powders in relation to chemical composition, structure and wetting property, Colloids and Surfaces B: Biointerfaces, 26 (2002) 197–212.10.1016/S0927-7765(01)00334-4 ↗
13. McCarthy O.J., Physical characteristics of milk fat and milk fat based products, in: Fox P.F., McSweeney P.L.H. (Eds), Advanced Dairy Chemistry, vol. 2 Lipids. Springer, New York, 2006, pp. 725–778.10.1007/0-387-28813-9_22 ↗
14. Mitchell W.R., Forny L., Althaus T.O., Niederreiter G., Palzer S., Hounslow M.J., Salman A.D., Mapping the rate-limiting regimes of food powder reconstitution in a standard mixing vessel, Powder Technology, 270 (2015) 520–527.10.1016/j.powtec.2014.08.014 ↗
15. Porowska A., Gianfrancesco A., Fries L., Dosta M., Palzer S., Heinrich S., Influence of feed composition and drying parameters on surface composition of a spray dried multi-component particle, Drying Technology, 33 (2015) 1911–1919.10.1080/07373937.2015.1069327 ↗
16. Potter N.N., Food Science, AVI publishing Company, Connecticut, 1986.
17. Richard B., Le Page J.F., Schuck P., Andre C., Jeantet R., Delaplace G., Towards a better control of dairy powder rehydration processes. International Dairy Journal, 31 (2013) 18–28.10.1016/j.idairyj.2012.07.007 ↗
18. Schober C., Fitzpatrick J.J., Effect of vortex formation on powder sinkability for reconstituting milk powders in water to high solids content in a stirred-tank, J. Food Engineering, 71 (2005) 1–8.10.1016/j.jfoodeng.2004.09.027 ↗
19. Washburn E.W., The dynamics of capillary flow, Physical Review, 17 (1921) 273–283.10.1103/PhysRev.17.273 ↗