Inertial Impaction Technique for the Classification of Particulate Matters and Nanoparticles: A Review
Source abstract
Abstract
Inertial impactors are applied widely to classify particulate matters (PMs) and nanoparticles (NPs) with desired aerodynamic diameters for further analyses due to their sharp cutoff characteristics, simple design, easy operation, and high collection ability. A few hundred papers have been published since the 1860s that addressed the characteristics and applications of the inertial impactors. In the last 30 years, our group has also carried out lots of studies to contribute to the design and the improvement of inertial impactors. With our understanding of inertial impactors, this article reviews previous studies of some typical types of the inertial impactors including conventional impactors, cascade impactors, and virtual impactors and the parameters for design consideration of these devices. The article also reviews some applications of the inertial impactors, which are mass concentration measurement, mass and number distribution measurement, personal exposure measurement, particulate matter control, and powder classification. The synthesized knowledge of the inertial impactor in this study can help researchers to design an inertial impactor with an accurate cutoff diameter, a sharp collection efficiency curve, and no particle bounce and particle overloading effects for long-term use for PM classification and control purposes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Particle Dynamics in Fluid Flows · Air Quality and Health Impacts · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Environmental Engineering, National Chiao Tung University, Taiwan
Funding
Ministry of Science and Technology, Taiwan · Higher Education Sprout Project of the National Chiao Tung University · Ministry of Education
References (100+)
Show source-provided references
1. AMI (Advanced Micro Instruments, Inc.), MiniVol TAS (Tactical Air Sampler) Operation Manual, 2020, accessed 13.03.202020.
2. Andersen A.A., A sampler for respiratory health hazard assessment, American Industrial Hygiene Association Journal, 27 (1966) 160–165. DOI: 10.1080/0002889660934281010.1080/00028896609342810 ↗
3. Anderson J.O., Thundiyil J.G., Stolbach A., Clearing the air: a review of the effects of particulate matter air pollution on human health, Journal of Medical Toxicology, 8 (2012) 166–175. DOI: 10.1007/s13181-011-0203-110.1007/s13181-011-0203-1 ↗
4. Arffman A., Marjamäki M., Keskinen J., Simulation of low pressure impactor collection efficiency curves, Journal of Aerosol Science, 42 (2011) 329–340. DOI: 10.1016/j.jaerosci.2011.0210.1016/j.jaerosci.2011.02.006 ↗
5. Asbach C., Alexander C., Clavaguera S., Dahmann D., Dozol H., Faure B., Fierz M., Fontana L., Iavicoli I., Kaminski H., MacCalman L., Meyer-Plath A., Simonow B., van Tongeren M., Todea A.M., Review of measurement techniques and methods for assessing personal exposure to airborne nanomaterials in workplaces, Science of the Total Environment, 603–604 (2017) 793–806. DOI: 10.1016/j.scitotenv.2017.03.04910.1016/j.scitotenv.2017.03.049 ↗
6. Bateman A.P., Belassein H., Martin S.T., Impactor apparatus for the study of particle rebound: relative humidity and capillary forces, Aerosol Science and Technology, 48 (2013) 42–52. DOI: 10.1080/02786826.2013.85386610.1080/02786826.2013.853866 ↗
7. Begum B.A., Hopke P.K., Identification of sources from chemical characterization of fine particulate matter and assessment of ambient air quality in Dhaka, Bangladesh, Aerosol and Air Quality Research, 19 (2019) 118–128. DOI: 10.4209/aaqr.2017.12.060410.4209/aaqr.2017.12.0604 ↗
8. Berner A., Practical experience with 20-stage impactor, Staub Reinhalt Luft, 32 (1972) 1–8.
9. Biswas P., Jones C.L., Flagan R.C., Distortion of size distributions by condensation and evaporation in aerosol instruments, Aerosol Science and Technology, 7 (1987) 231–246. DOI: 10.1080/0278682870895916110.1080/02786828708959161 ↗
10. Buser M.D., Wanjura J.D., Whitelock D.P., Capareda S.C., Shaw B.W., Lacey R., Estimating FRM PM10 sampler performance characteristics using particle size analysis and collocated TSP and PM10 samplers: cotton gins, Transactions of the ASABE, 51 (2008) 695–702. DOI: 10.13031/2013.2438210.13031/2013.24382 ↗
11. Chang M., Kim S., Sioutas C., Experimental studies on particle impaction and bounce: effects of substrate design and material, Atmospheric Environment, 33 (1999) 2313–2322. DOI: 10.1016/S1352-2310(99)00082-510.1016/S1352-2310(99)00082-5 ↗
12. Chein H., Lundgren D.A., A virtual impactor with clean air core for the generation of aerosols with narrow size distributions, Aerosol Science and Technology, 18 (1993) 376–388. DOI: 10.1080/0278682930895961110.1080/02786829308959611 ↗
13. Chen M., Romay F.J., Li L., Naqwi A., Marple V.A., A novel quartz crystal cascade impactor for real-time aerosol mass distribution measurement, Aerosol Science and Technology, 50 (2016) 971–983. DOI: 10.1080/02786826.2016.121379010.1080/02786826.2016.1213790 ↗
14. Chen M., Romay F.J., Marple V.A., Design and evaluation of a low flow personal cascade impactor, Aerosol Science and Technology, 52 (2018) 192–197. DOI: 10.1080/02786826.2017.138849810.1080/02786826.2017.1388498 ↗
15. Chen S.C., Tsai C.J., Chen H.D., Huang C.Y., Roam G.D., The influence of relative humidity on nanoparticle concentration and particle mass distribution measurements by the MOUDI, Aerosol Science and Technology, 45 (2011) 596–603. DOI: 10.1080/02786826.2010.55155710.1080/02786826.2010.551557 ↗
16. Chen S.C., Tsai C.J., Chou C.C.K., Roam G.D., Cheng S.S., Wang Y.N., Ultrafine particles at three different sampling locations in Taiwan, Atmospheric Environment, 44 (2010a) 533–540. DOI: 10.1016/j.atmosenv.2009.10.04410.1016/j.atmosenv.2009.10.044 ↗
17. Chen S.C., Tsai C.J., Huang C.Y., Chen H.D., Chen S.J., Lin C.C., Tsai J.H., Chou C.C.K., Lung S.C.C., Huang W.R., Roam G.D., Wu W.Y., Smolik J., Dzumbova L., Chemical mass closure and chemical characteristics of ambient ultrafine particles and other PM fractions, Aerosol Science and Technology, 44 (2010b) 713–723. DOI: 10.1080/02786826.2010.48638510.1080/02786826.2010.486385 ↗
18. Chen S.C., Tsai C.J., Wu C.H., Pui D.Y.H., Onischuk A.A., Karasev V.V., Particle loss in a critical orifice, Journal of Aerosol Science, 38 (2007) 935–949. DOI: 10.1016/j.jaerosci.2007.06.01010.1016/j.jaerosci.2007.06.010 ↗
19. Cheon T.W., Lee J.Y., Bae J.Y., Yook S.J., Enhancement of collection efficiency of an inertial impactor using an additional punched impaction plate, Aerosol and Air Quality Research, 17 (2017) 2349–2357. DOI: 10.4209/aaqr.2017.01.001810.4209/aaqr.2017.01.0018 ↗
20. Chien C.L., Tien C.Y., Liu C.N., Ye H., Huang W., Tsai C.J., Design and testing of the NCTU micro-orifice cascade impactor (NMCI) for the measurement of nanoparticle size distributions, Aerosol Science and Technology, 49 (2015) 1009–1018. DOI: 10.1080/02786826.2015.108997610.1080/02786826.2015.1089976 ↗
21. Chow J.C., Watson J.G., Review of measurement methods and compositions for ultrafine particles, Aerosol and Air Quality Research, 7 (2007) 121–173. DOI: 10.4209/aaqr.2007.05.002910.4209/aaqr.2007.05.0029 ↗
22. Chuan R.L., An instrument for the direct measurement of particulate mass, Journal of Aerosol Science, 1 (1970) 111–113. DOI: 10.1016/0021-8502(70)90014-510.1016/0021-8502(70)90014-5 ↗
23. Conner W.D., An inertial-type particle separator for collecting large samples, Journal of the Air Pollution Control Association, 16 (1966) 35–38. DOI: 10.1080/00022470.1966.1046843810.1080/00022470.1966.10468438 ↗
24. Demokritou P., Gupta T., Koutrakis P., A high volume apparatus for the condensational growth of ultrafine particles for inhalation toxicological studies, Aerosol Science and Technology, 36 (2002a) 1061–1072. DOI: 10.1080/0278682029009223010.1080/02786820290092230 ↗
25. Demokritou P., Kavouras I.G., Ferguson S.T., Koutrakis P., Development and laboratory performance evaluation of a personal multipollutant sampler for simultaneous measurements of particulate and gaseous pollutants, Aerosol Science and Technology, 35 (2001) 741–752. DOI: 10.1080/0278682015254678910.1080/02786820152546789 ↗
26. Demokritou P., Kavouras I.G., Ferguson S.T., Koutrakis P., Development of a high volume cascade impactor for toxicological and chemical characterization studies, Aerosol Science and Technology, 36 (2002b) 925–933. DOI: 10.1080/0278682029009211310.1080/02786820290092113 ↗
27. Demokritou P., Lee S.J., Ferguson S.T., Koutrakis P., A compact multistage (cascade) impactor for the characterization of atmospheric aerosols, Journal of Aerosol Science, 35 (2004a) 281–299. DOI: 10.1016/j.jaerosci.2003.09.00310.1016/j.jaerosci.2003.09.003 ↗
28. Demokritou P., Lee S.J., Koutrakis P., Development and evaluation of a high loading PM2.5 speciation sampler, Aerosol Science and Technology, 38 (2004b) 111–119. DOI: 10.1080/0278682049024904510.1080/02786820490249045 ↗
29. Ding Y., Koutrakis P., Development of a dichotomous slit nozzle virtual impactor, Journal of Aerosol Science, 31 (2000) 1421–1431. DOI: 10.1016/S0021-8502(00)00048-310.1016/S0021-8502(00)00048-3 ↗
30. Du W.,Zhang Y., Chen Y., Xu L., Chen J., Deng J., Hong Y., Xiao H., Chemical characterization and source apportionment of PM2.5 during spring and winter in the Yangtze River Delta, China, Aerosol and Air Quality Research, 17 (2017) 2165–2180. DOI: 10.4209/aaqr.2017.03.010810.4209/aaqr.2017.03.0108 ↗
31. Dunbar C., Kataya A., Tiangbe T., Reducing bounce effects in the Andersen cascade impactor, International Journal of Pharmaceutics, 301 (2005) 25–32. DOI: 10.1016/j.ijpharm.2005.04.03910.1016/j.ijpharm.2005.04.039 ↗
32. Durand T., Bau S., Morele Y., Matera V., Bémer D., Rousset D., Quantification of low pressure impactor wall deposits during zinc nanoparticle sampling, Aerosol and Air Quality Research, 14 (2014) 1812–1821. DOI: 10.4209/aaqr.2013.10.030410.4209/aaqr.2013.10.0304 ↗
33. ECS, Ambient air, Standard gravimetric measurement method for the determination of the PM10 or PM2.5 mass concentration of suspended particulate matter (EN 12341:2014), European Committee for Standardization, 2014.
34. Fan Z.L., Chen X.C., Lui K.H., Ho S.S.H., Cao J.J., Lee S.C., Huang H., Ho K.F., Relationships between outdoor and personal exposure of carbonaceous species and polycyclic aromatic hydrocarbons (PAHs) in fine particulate matter (PM2.5) at Hong Kong, Aerosol and Air Quality Research, 17 (2017) 666–679. DOI: 10.4209/aaqr.2016.08.034910.4209/aaqr.2016.08.0349 ↗
35. Fang C., Marple V., Rubow K., Influence of cross-flow on particle collection characteristics of multi-nozzle impactors, Journal of Aerosol Science, 22 (1991) 403–415. DOI: 10.1016/0021-8502(91)90001-X10.1016/0021-8502(91)90001-X ↗
36. Faulkner W.B., Smith R., Haglund J., Large particle penetration during PM10 sampling, Aerosol Science and Technology, 48 (2014) 676–687. DOI: 10.1080/02786826.2014.91500510.1080/02786826.2014.915005 ↗
37. Fernandez de la Mora J., Schmidt-Ott A., Performance of a hypersonic impactor with silver particles in the 2 nm range, Journal of Aerosol Science, 24 (1993) 409–415. DOI: 10.1016/0021-8502(93)90012-X10.1016/0021-8502(93)90012-X ↗
38. Fujitani Y., Furuyama A., Tanabe K., Hirano S., Comparison of oxidative abilities of PM2.5 collected at traffic and residential sites in Japan. Contribution of transition metals and primary and secondary aerosols, Aerosol and Air Quality Research, 17 (2017) 574–587. DOI: 10.4209/aaqr.2016.07.029110.4209/aaqr.2016.07.0291 ↗
39. Fujitani Y., Hasegawa S., Fushimi A., Kondo Y., Tanabe K., Kobayashi S., Kobayashi T., Collection characteristics of low-pressure impactors with various impaction substrate materials, Atmospheric Environment, 40 (2006) 3221–3229. DOI: 10.1016/j.atmosenv.2006.02.00110.1016/j.atmosenv.2006.02.001 ↗
40. Fulghum M.R., Hargather M.J., Settles G.S., Integrated impactor/detector for a high-throughput explosive-trace detection portal, IEEE Sensors Journal, 13 (2012) 1252–1258. DOI: 10.1109/JSEN.2012.223167110.1109/JSEN.2012.2231671 ↗
41. García-Ruiz E., Romay F.J., García J.A., Iza J.M., Cambra J.F., Gangoiti G., Legarreta J.A., Effect of nozzle spacing in the formation of primary and secondary deposits in multi-nozzle inertial impactors part II: Numerical study, Journal of Aerosol Science, 136 (2019) 106–127. DOI: 10.1016/j.jaerosci.2019.06.00910.1016/j.jaerosci.2019.06.009 ↗
42. Gertler A.W., Coulombe W.G., Watson J.G., Bowen J.L., Egami R.T., Marsh S., Comparison of PM10 concentrations in high- and medium-volume samplers in a desert environment, Environmental Monitoring and Assessment, 24 (1993) 13–25. DOI: 10.1007/BF0056879610.1007/BF00568796 ↗
43. Gudmundsson A., Bohgard M., Hansson H.C., Characteristics of multi-nozzle impactors with 50 μm laser-drilled nozzles, Journal of Aerosol Science, 26 (1995) 915–931. DOI: 10.1016/0021-8502(95)00023-610.1016/0021-8502(95)00023-6 ↗
44. Gugamsetty B., Wei H., Liu C.N., Awasthi A., Hsu S.C., Tsai C.J., Roam G.D., Wu Y.C., Chen C.F., Source characterization and apportionment of PM10, PM2.5 and PM0.1 by using positive matrix factorization, Aerosol and Air Quality Research, 12 (2012) 476–491. DOI: 10.4209/aaqr.2012.04.008410.4209/aaqr.2012.04.0084 ↗
45. Guo L., Liu J., Liu S., Wang J., Velocity measurements and flow field characteristic analyses in a turbo air classifier, Powder Technology, 178 (2007) 10–16. DOI: 10.1016/j.powtec.2007.03.04010.1016/j.powtec.2007.03.040 ↗
46. Han J., Seo J., Park D., Hyun J., Hwang J., Design and performance evaluation of a laboratory-made 200 nm precut electrical cascade impactor, Aerosol and Air Quality Research, 18 (2018) 1118–1130. DOI: 10.4209/aaqr.2017.11.047110.4209/aaqr.2017.11.0471 ↗
47. Heo J.E., Zahir M.Z., Park H., Seo J., Park H., Yook S.J., Effect of horizontal inlet on slit-nozzle virtual impactor performance, Journal of Mechanical Science and Technology, 32 (2018) 2419–2424. DOI: 10.1007/s12206-018-0454-810.1007/s12206-018-0454-8 ↗
48. Hering S.V., Calibration of the QCM impactor for stratospheric sampling, Aerosol Science and Technology, 7 (1987) 257–274. DOI: 10.1080/0278682870895916310.1080/02786828708959163 ↗
49. Hinds W.C., Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles, John Wiley & Sons, 1999, ISBN: 0471194107.
50. Hsiao T.C., Chen D., Greenberg P.S., Street K.W., Effect of geometric configuration on the collection efficiency of axial flow cyclones, Journal of Aerosol Science, 42 (2011) 78–86. DOI: 10.1016/j.jaerosci.2010.11.00410.1016/j.jaerosci.2010.11.004 ↗
51. Hsiao T.C., Chen D.R., Li L., Greenberg P., Street K.W., Development of a multi-stage axial flow cyclone, Aerosol Science and Technology, 44 (2010) 253–261. DOI: 10.1080/0278682090357539410.1080/02786820903575394 ↗
52. Hu S., Seshadri S., McFarland A.R., CFD study on compound impaction in a jet-in-well impactor, Aerosol Science and Technology, 41 (2007) 1102–1109. DOI: 10.1080/0278682070177743210.1080/02786820701777432 ↗
53. Huang C.H., Chang C.S., Chang S.H., Tsai C.J., Shih T.S., Tang D.T., Use of porous foam as the substrate of an impactor for respirable aerosol sampling, Journal of Aerosol Science, 36 (2005) 1373–1386. DOI: 10.1016/j.jaerosci.2005.03.00810.1016/j.jaerosci.2005.03.008 ↗
54. Huang C.H., Chang C.S., Chang S.H., Tsai C.J., Shih T.S., Tang D.T., Development of a personal inertial impactor for respirable dust sampling, Journal of Occupational Safety and Health 14 (2006) 79–86. DOI: 10.7005/JOSH.200606.0079
55. Huang C.H., Tsai C.J., Effect of gravity on particle collection efficiency of inertial impactors, Journal of Aerosol Science, 32 (2001) 375–387. DOI: 10.1016/S0021-8502(00)00086-010.1016/S0021-8502(00)00086-0 ↗
56. Huang C.H., Tsai C.J., Influence of impaction plate diameter and particle density on collection efficiency of round-nozzle inertial impactors, Aerosol Science and Technology, 36 (2002a) 714–720. DOI: 10.1080/027868202900384110.1080/02786820290038410 ↗
57. Huang C.H., Tsai C.J., The particle collection efficiency curves by the porous substrate of an inertial impactor, Aerosol and Air Quality Research, 2 (2002b) 1–8. DOI: 10.4209/2002.06.000110.4209/2002.06.0001 ↗
58. Huang C.H., Tsai C.J., Mechanism of particle impaction and filtration by the dry porous metal substrates of an inertial impactor, Aerosol Science and Technology, 37 (2003) 486–493. DOI: 10.1080/0278682039011264110.1080/02786820300968 ↗
59. Huang C.H., Tsai C.J., Shih T.S., Particle collection efficiency of an inertial impactor with porous metal substrates, Journal of Aerosol Science, 32 (2001) 1035–1044. DOI: 10.1016/S0021-8502(01)00038-610.1016/S0021-8502(01)00038-6 ↗
60. Huang C.H., Tsai C.J., Wang Y.M., Control efficiency of submicron particles by an efficient venturi scrubber system, Journal of Environmental Engineering, 133 (2007) 454–461. DOI: 10.1061/(ASCE)0733-9372(2007)133:4(454)10.1061/(ASCE)0733-9372(2007)133:4(454) ↗
61. Jain S., Petrucci G.A., A new method to measure aerosol particle bounce using a cascade electrical low pressure impactor, Aerosol Science and Technology, 49 (2015) 390–399. DOI: 10.1080/02786826.2015.103639310.1080/02786826.2015.1036393 ↗
62. Järvinen A., Aitomaa M., Rostedt A., Keskinen J., Yli-Ojanperä J., Calibration of the new electrical low pressure impactor (ELPI+), Journal of Aerosol Science, 69 (2014) 150–159. DOI: 10.1016/j.jaerosci.2013.12.00610.1016/j.jaerosci.2013.12.006 ↗
63. John W., Winklmayr W., Wang H.C., Particle deagglomeration and reentrainment in a PM-10 sampler, Aerosol Science and Technology, 14 (1991) 165–176. DOI: 10.1080/0278682910895948010.1080/02786829108959480 ↗
64. Kang M., Cho H.J., Kwak H., Park K., Evaluation of particle bounce in various collection substrates to be used as vaporizer in aerosol mass spectrometer, Aerosol Science and Technology, 49 (2015) 332–339. DOI: 10.1080/02786826.2015.102851810.1080/02786826.2015.1028518 ↗
65. Kenny L.C., Gussman R., Meyer M., Development of a sharp-cut cyclone for ambient aerosol monitoring applications, Aerosol Science and Technology, 32 (2000) 338–358. DOI: 10.1080/02786820030366910.1080/027868200303669 ↗
66. Kenny L.C., Merrifield T., Mark D., Gussman R., Thorpe A., The development and designation testing of a new USEPA-approved fine particle inlet: A study of the USEPA designation process, Aerosol Science and Technology, 38 (2004) 15–22. DOI: 10.1080/02786829050229010.1080/027868290502290 ↗
67. Keskinen J., Pietarinen K., Lehtimäki M., Electrical low pressure impactor, Journal of Aerosol Science, 23 (1992) 353–360.10.1016/0021-8502(92)90004-F ↗
68. Kim D.S., Lee K.W., Kim Y.J., Characterization of a particle trap impactor, Journal of Aerosol Science, 37 (2006) 1016–1023. DOI: 10.1016/j.jaerosci.2005.09.00310.1016/j.jaerosci.2005.09.003 ↗
69. Kim M.K., Kim W.G., Lee K.S., Yook S.J., Collection efficiency of round-nozzle impactors with horizontal annular inlet, Journal of Aerosol Science, 74 (2014) 63–69. DOI: 10.1016/j.jaerosci.2014.04.00710.1016/j.jaerosci.2014.04.007 ↗
70. Kim W.G., Lee H., Myoung J.H., Han S.K., Yook S.J., Ahn K.H., Effect of a horizontal inlet on the collection efficiency of a rectangular-slit-nozzle impactor, Aerosol Science and Technology, 48 (2014) 649–654. DOI: 10.1080/02786826.2014.91059210.1080/02786826.2014.910592 ↗
71. Kim W.G., Yook S.J., Ahn K.H., Collection efficiency of rectangular slit-nozzle inertial impactors with impaction plates of elliptical concave curvature, Aerosol Science and Technology, 47 (2013) 99–105. DOI: 10.1080/02786826.2012.73016210.1080/02786826.2012.730162 ↗
72. Kim Y.J., Yook S.J., Enhancement of collection efficiency of inertial impactors using elliptical concave impaction plates, Journal of Aerosol Science, 42 (2011) 898–908. DOI: 10.1016/j.jaerosci.2011.08.00610.1016/j.jaerosci.2011.08.006 ↗
73. Kingham S., Durand M., Aberkane T., Harrison J., Gaines Wilson J., Epton M., Winter comparison of TEOM, MiniVol and DustTrak PM10 monitors in a woodsmoke environment, Atmospheric Environment, 40 (2006) 336–347. DOI: 10.1016/j.atmosenv.2005.09.04210.1016/j.atmosenv.2005.09.042 ↗
74. Kumar A., Gupta T., Development and field evaluation of a multiple slit nozzle-based high volume PM2.5 inertial impactor assembly (HVIA), Aerosol and Air Quality Research, 15 (2015a) 1188–1200. DOI: 10.4209/aaqr.2015.01.005010.4209/aaqr.2015.01.0050 ↗
75. Kumar A., Gupta T., Development and laboratory performance evaluation of a variable configuration PM1/PM2.5 impaction-based sampler, Aerosol and Air Quality Research, 15 (2015b) 768–775. DOI: 10.4209/aaqr.2014.11.030710.4209/aaqr.2014.11.0307 ↗
76. Kumsanlas N., Piriyakarnsakul S., Sok P., Hongtieab S., Ikemori F., Szymanski W.W., Hata M., Otani Y., Furuuchi M., A cascade air sampler with multi-nozzle inertial filters for PM0.1, Aerosol and Air Quality Research, 19 (2019) 1666–1677. DOI: 10.4209/aaqr.2019.02.006610.4209/aaqr.2019.02.0066 ↗
77. Kwon H.-B., Kim H.-L., Hong U.-S., Yoo S.-J., Kim K., Han J., Kim M.-K., Hwang J., Kim Y.-J., Particle size spectrometer using inertial classification and electrical measurement techniques for real-time monitoring of particle size distribution, Lab on a Chip, 18 (2018) 2642–2652. DOI: 10.1039/C8LC00429C10.1039/C8LC00429C ↗
78. Kwon S.B., Kim M.C., Lee K.W., Effects of jet configuration on the performance of multi-nozzle impactors, Journal of Aerosol Science, 33 (2002) 859–869. DOI: 10.1016/S0021-8502(02)00040-X10.1016/S0021-8502(02)00040-X ↗
79. Lai C.Y., Huang S.H., Chang C.P., Lin J.Y., Reducing particle bounce and loading effect for a multi-hole impactor, Aerosol Science and Technology Aerosol Science and Technology, 42 (2010) 114–122. DOI: 10.1080/0278682070180904510.1080/02786820701809045 ↗
80. Lai W.H., Lu W.F., Chen C.C., The new expression of the effectiveness of powder classification, Advanced Powder Technology, 16 (2005) 611–620. DOI: 10.1163/15685520577448335210.1163/156855205774483352 ↗
81. Landis M.S., Patrick Pancras J., Graney J.R., White E.M., Edgerton E.S., Legge A., Percy K.E., Source apportionment of ambient fine and coarse particulate matter at the Fort McKay community site, in the Athabasca Oil Sands Region, Alberta, Canada, Science of the Total Environment, 584–585 (2017) 105–117. DOI: 10.1016/j.scitotenv.2017.01.11010.1016/j.scitotenv.2017.01.110 ↗
82. Le T.C., Shukla K.K., Chen Y.-T., Chang S.-C., Lin T.-Y., Li Z., Pui D.Y.H., Tsai C.-J., On the concentration differences between PM2.5 FEM monitors and FRM samplers, Atmospheric Environment, 222 (2020) 117138. DOI: 10.1016/j.atmosenv.2019.11713810.1016/j.atmosenv.2019.117138 ↗
83. Le T.C., Shukla K.K., Sung J.-C., Li Z., Yeh H., Huang W., Tsai C.-J., Sampling efficiency of low-volume PM10 inlets with different impaction substrates, Aerosol Science and Technology, 53 (2019) 295–308. DOI: 10.1080/02786826.2018.155991910.1080/02786826.2018.1559919 ↗
84. Le T.C.,Tsai C.J., Novel non-bouncing PM2.5 impactor modified from well impactor ninety-six, Aerosol Science and Technology, 51 (2017) 1287–1295. DOI: 10.1080/02786826.2017.134162110.1080/02786826.2017.1341621 ↗
85. Lee H., Jo D.H., Kim W.G., Yook S.J., Ahn K.H., Effect of an orifice on collection efficiency and wall loss of a slit virtual impactor, Aerosol Science and Technology, 48 (2014) 121–127. DOI: 10.1080/02786826.2013.86233310.1080/02786826.2013.862333 ↗
86. Lee S.J., Demokritou P., Koutrakis P., Performance evaluation of commonly used impaction substrates under various loading conditions, Journal of Aerosol Science, 36 (2005) 881–895. DOI: 10.1016/j.jaerosci.2004.11.00610.1016/j.jaerosci.2004.11.006 ↗
87. Li Z.,Liu Y., Xing Y., Tran T.M.P., Le T.C., Tsai C.J., Novel wire-on-plate electrostatic precipitator (WOP-EP) for controlling fine particle and nanoparticle pollution, Environmental Science & Technology, 49 (2015) 8683–8690. DOI: 10.1021/acs.est.5b0184410.1021/acs.est.5b01844 ↗
88. Liang S., Numerical study of classification of ultrafine particles in a gas-solid field of elbow-jet classifier, Chemical Engineering Communications, 197 (2010) 1016–1032. DOI: 10.1080/0098644090335939210.1080/00986440903359392 ↗
89. Lim K.S., Lee K.W., Collection efficiency and particle loss of virtual impactors with different methods of increasing pressure drop, Journal of Aerosol Science, 37 (2006) 1188–1197. DOI: 10.1016/j.jaerosci.2005.11.01110.1016/j.jaerosci.2005.11.011 ↗
90. Lin G.Y., Cuc L.T., Lu W., Tsai C.J., Chein H.M., Chang F.T., High-efficiency wet electrocyclone for removing fine and nanosized particles, Separation and Purification Technology, 114 (2013) 99–107. DOI: 10.1016/j.seppur.2013.04.03910.1016/j.seppur.2013.04.039 ↗
91. Lin G.Y., Lee G.R., Lin S.F., Hung Y.H., Li S.W., Wu G.J., Ye H., Huang W., Tsai C.J., Ultrafine particles and PM2.5 at three urban air monitoring stations in Northern Taiwan from 2011 to 2013, Aerosol and Air Quality Research, 15 (2015) 2305–2317. DOI: 10.4209/aaqr.2015.04.027110.4209/aaqr.2015.04.0271 ↗
92. Lin G.Y., Tsai C.J., Chen S.C., Chen T.M., Li S.N., An efficient single-stage wet electrostatic precipitator for fine and nanosized particle control, Aerosol Science and Technology, 44 (2010) 38–45. DOI: 10.1080/0278682090333829810.1080/02786820903338298 ↗
93. Liu C.N., Awasthi A., Hung Y.H., Gugamsetty B., Tsai C.J., Wu Y.C., Chen C.F., Differences in 24-h average PM2.5 concentrations between the beta attenuation monitor (BAM) and the dichotomous sampler (Dichot), Atmospheric Environment, 75 (2013a) 341–347. DOI: 10.1016/j.atmosenv.2013.04.06210.1016/j.atmosenv.2013.04.062 ↗
94. Liu C.N., Awasthi A., Hung Y.H., Tsai C.J., Collection efficiency and interstage loss of nanoparticles in micro-orifice-based cascade impactors, Atmospheric Environment, 69 (2013b) 325–333. DOI: 10.1016/j.atmosenv.2012.12.00310.1016/j.atmosenv.2012.12.003 ↗
95. Liu C.N., Chen S.C., Tsai C.J., A novel multifilter PM10–PM2.5 sampler (MFPPS), Aerosol Science and Technology, 45 (2011) 1480–1487. DOI: 10.1080/02786826.2011.60213510.1080/02786826.2011.602135 ↗
96. Liu C.N., Lin S.F., Awasthi A., Tsai C.J., Wu Y.C., Chen C.F., Sampling and conditioning artifacts of PM2.5 in filter-based samplers, Atmospheric Environment, 85 (2014) 48–53. DOI: 10.1016/j.atmosenv.2013.11.07510.1016/j.atmosenv.2013.11.075 ↗
97. Liu C.N., Lin S.F., Tsai C.J., Wu Y.C., Chen C.F., Theoretical model for the evaporation loss of PM2.5 during filter sampling, Atmospheric Environment, 109 (2015) 79–86. DOI: 10.1016/j.atmosenv.2015.03.01210.1016/j.atmosenv.2015.03.012 ↗
98. Loo B.W., Jaklevic J.M., Goulding F.S., Dichotomous virtual impactors for large scale monitoring of airborne particulate matter, in: Liu B.Y.H. (Ed.), Fine Particles: Aerosol Generation, Measurement, Sampling, and Analysis, Academic Press, New York, 1975, pp. 311–350.10.1016/B978-0-12-452950-2.50020-8 ↗
99. Marjamäki M., Keskinen J., Effect of impaction plate roughness and porosity on collection efficiency, Journal of Aerosol Science, 35 (2004) 301–308. DOI: 10.1016/j.jaerosci.2003.09.00110.1016/j.jaerosci.2003.09.001 ↗
100. Marple V.A., History of impactors—the first 110 years, Aerosol Science and Technology, 38 (2004) 247–292. DOI: 10.1080/0278682049042434710.1080/02786820490424347 ↗