Control of Particle Tribocharging
Source abstract
Abstract
When two different materials are brought into contact and separated, an electrical charge is transferred from one to the other. This phenomenon is called contact electrification, contact charging, or tribocharging. Charged particles cause various secondary phenomena during powder processing, such as deposition, adhesion, and electrostatic discharge. Additionally, charged particles are used in many industrial applications such as electrophotography, electrostatic powder coating, and separation; thus, particle charge control is very important for improving particle performance. However, there are still many unknown effects, and in some cases, inconsistent results have been reported. In this review, the basic concepts and theories of charge transfer between solid surfaces are summarized and a description of particle charging caused by repeated impacts on a wall is formulated. On the basis of these concepts and formulations, novel methods of controlling particle tribocharging are presented. In particular, a method using an applied electric field is expected to be applicable in industrial fields.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrostatic Discharge in Electronics · Recycling and Waste Management Techniques · Microfluidic and Bio-sensing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, Kyoto University
Funding
Japan Society for the Promotion of Science · Ministry of Education, Culture, Sports, Science and Technology
References (91)
Show source-provided references
1. 1) Joseph, S. and Klinzing, G.E. (1983): Vertical gas–solid transition flow with electrostatics, Powder Technology, vol. 36, pp. 79–87.10.1016/0032-5910(83)80011-4 ↗
2. 2) Nifuku, M., Ishikawa, T. and Sasaki, T. (1989): Static electrification phenomena in pneumatic transportation of coal, Journal of Electrostatics, vol. 23, pp. 45–54.10.1016/0304-3886(89)90031-4 ↗
3. 3) Guardiola, J., Rojo, V. and Ramos, G. (1996): Influence of particle size, fluidization velocity and relative humidity on fluidized bed electrostatics, Journal of Electrostatics, vol. 37, pp. 1–20.10.1016/0304-3886(96)00002-2 ↗
4. 4) Adhiwidjaja, I., Matsusaka, S., Yabe, S. and Masuda, H. (2000): Simultaneous phenomenon of particle deposition and reentrainment in charged aerosol flow—effects of particle charge and external electric field on the deposition layer, Advanced Powder Technology, vol. 11, pp. 221–233.10.1163/156855200750172330 ↗
5. 5) Yao, J., Zhang, Y., Wang, C.-H., Matsusaka, S. and Masuda, H. (2004): Electrostatics of the granular flow in a pneumatic conveying system, Industrial & Engineering Chemistry Research, vol. 43, pp. 7181–7199.10.1021/ie049661l ↗
6. 6) Jones, T.B. and King, J.L. (1991): “Powder Handling and Electrostatics: Understanding and Preventing Hazards”, Lewis, Chelsea.
7. 7) Ohsawa, A. (2003): Computer simulation for assessment of electrostatic hazards in filling operations with powder, Powder Technology, vol. 135/136, pp. 216–222.10.1016/S0032-5910(03)00162-1 ↗
8. 8) Nifuku, M. and Katoh, H. (2003): A study on the static electrification of powders during pneumatic transportation and the ignition of dust cloud, Powder Technology, vol. 135/136, pp. 234–242.10.1016/S0032-5910(03)00163-3 ↗
9. 9) Mazumder, M.K. (1999): Electrostatic processes. In: Webster, J. (Ed.), “Wiley Encyclopedia of Electrical and Electronics Engineering”, John Wiley & Sons, Inc., vol. 7, pp. 15–39.10.1002/047134608X.W3708 ↗
10. 10) Schein, L.B. (1992/1996): “Electrophotography and Development Physics”, 2nd ed., Springer-Verlag Berlin/Laplacian Press.10.1007/978-3-642-77744-8 ↗
11. 11) Schein, L.B. (1999): Recent advances in our understanding of toner charging, Journal of Electrostatics, vol. 46, pp. 29–36.10.1016/S0304-3886(98)00056-4 ↗
12. 12) Hughes, J. F. (1984): Electrostatic Powder Coating, Research Studies Press, Wiley, New York.
13. 13) Bailey, A.G. (1998): The science and technology of electrostatic powder spraying, transport and coating, Journal of Electrostatics, vol. 45, pp.85–120.10.1016/S0304-3886(98)00049-7 ↗
14. 14) Kleber, W. and Makin, B. (1998): Triboelectric powder coating: a practical approach for industrial use, Particulate Science and Technology, vol. 16, pp. 43–53.10.1080/02726359808906783 ↗
15. 15) Lawless, P.A. (1999): Electrostatic precipitators, In: Webster, J. (Ed.), “Wiley Encyclopedia of Electrical and Electronics Engineering”, John Wiley & Sons, Inc., vol. 7, pp. 1–15.10.1002/047134608X.W3015 ↗
16. 16) Gupta, R., Gidaspow, D. and Wasan, D.T. (1993): Electrostatic separation of powder mixtures based on the work functions of its constituents, Powder Technology, vol. 75, pp. 79–87.10.1016/0032-5910(93)80027-8 ↗
17. 17) Yanar, D.K. and Kwetkus, B.A. (1995): Electrostatic separation of polymer powders, Journal of Electrostatics, vol. 35, pp. 257–266.10.1016/0304-3886(94)00044-W ↗
18. 18) Ghadiri, M., Martin, C.M., Morgan, J.E.P. and Clift, R. (1992): An electromechanical valve for solids, Powder Technology, vol. 73, pp. 21–35.10.1016/0032-5910(92)87003-S ↗
19. 19) Balachandran, W., Hu, D., Ghadiri, M., Law, S.E. and Thompson, S.A. (1997): The study of the performance of an electrostatic valve used for bulk transport of particulate materials, IEEE Transactions on Industry Applications, vol. 33, pp. 871–878.10.1109/28.605726 ↗
20. 20) O'Neill, B.C. and Willis, C.A. (1987): An electrostatic method for the measurement of powder flow rates in pipes, Electrostatics ‘87, IOP Publishing, Oxford, pp. 303–306.
21. 21) Matsusaka, S. and Masuda, H. (2006): Simultaneous measurement of mass flow rate and charge-to-mass ratio of particles in gas–solids pipe flow, Chemical Engineering Science, vol. 61, pp. 2254–2261.10.1016/j.ces.2005.05.006 ↗
22. 22) Gajewski, J.B. (2006): Non-contact electrostatic flow probes for measuring the flow rate and charge in the two-phase gas–solids flows, Chemical Engineering Science, vol. 61, pp. 2262–2270.10.1016/j.ces.2005.05.007 ↗
23. 23) Gajewski, J.B. (2008): Electrostatic nonintrusive method for measuring the electric charge, mass flow rate, and velocity of particulates in the two-phase gas–solid pipe flow—its only or as many as 50 years of historical evolution, IEEE Transactions on Industry Applications, vol. 44, pp. 1418–1430.10.1109/TIA.2008.2002276 ↗
24. 24) Machida, M. and Scarlett, B. (2005): Process tomography system by electrostatic charge carried by particles, IEEE Sensors Journal, vol. 5, 251–259.10.1109/JSEN.2005.843892 ↗
25. 25) Matsusaka, S., Fukuda, H., Sakura, Y., Masuda, H. and Ghadiri, M. (2008): Analysis of pulsating electric signals generated in gas–solids pipe flow, Chemical Engineering Science, vol. 63, pp. 1353–1360.10.1016/j.ces.2007.07.010 ↗
26. 26) Schnurmann, R. (1941): Contact electrification of solid particles, Proceedings of the Physical Society, vol. 53, pp. 547–553.10.1088/0959-5309/53/5/306 ↗
27. 27) Harper, W.R. (1951): The Volta effect as a cause of static electrification, Proceedings of the Royal Society of London Series A, vol. 205, 83–103.10.1098/rspa.1951.0019 ↗
28. 28) Harper, W.R. (1967): “Contact and Frictional Electrification”, Clarendon Press, Oxford.
29. 29) Lowell, J. and Rose-Innes, A.C. (1980): Contact electrification, Advances in Physics, vol. 29, pp. 947–1023.10.1080/00018738000101466 ↗
30. 30) Jones, T.B. (1995): “Electromechanics of Particles”, Cambridge University Press, Cambridge.10.1017/CBO9780511574498 ↗
31. 31) Matsusaka, S. and Masuda, H. (2003): Electrostatics of particles, Advanced Powder Technology, vol. 14, pp. 143–166.10.1163/156855203763593958 ↗
32. 32) Matsusaka, S., Maruyama, H., Matsuyama, T. and Ghadiri, M. (2010): Triboelectric Charging of Powders: A review, Chemical Engineering Science, vol. 65, pp. 5781–5807.10.1016/j.ces.2010.07.005 ↗
33. 33) Mazumder, M.K., Ware, R.E., Yokoyama, T., Rubin, B. J. and Kamp, D. (1991): Measurement of particle size and electrostatic charge distributions on toners using E-SPART analyzer, IEEE Transactions on Industry Applications, vol. 27, pp. 611–619.10.1109/28.85472 ↗
34. 34) Masuda, H., Gotoh, K. and Orita, N. (1993): Charge distribution measurement of aerosol particles, Journal of Aerosol Research, Japan, vol. 8, pp. 325–332.
35. 35) Matsusaka, S., Oki, M. and Masuda, H. (2003): Bipolar charge distribution of a mixture of particles with different electrostatic characteristics in gas–solids pipe flow, Powder Technology, vol. 135/136, pp. 150–155.10.1016/S0032-5910(03)00160-8 ↗
36. 36) Epping, R.H. and Kuettner, A. (2002): Free air beam in an electric field for determination of the electrostatic charge of powders between 1 and 200 μm, Journal of Electrostatics, vol. 55, pp. 279–288.10.1016/S0304-3886(01)00210-8 ↗
37. 37) Ahn, Y.C., Kim, D.H., Kim, S.C., Hwang, E.G., Lee, C.G., Kim, G.T., Shin, H.S., Lee, J.K. and Lee, S.H. (2004): Measurement and control of triboelectrically charged silica and glassy carbon particles, Particulate Science and Technology, vol. 22, pp. 305–320.10.1080/02726350490501727 ↗
38. 38) Matsusaka, S., Yoshitani, K., Tago, H., Nii, T., Masuda, H. and Iwamatsu, T. (2008): Sampling of charged fine particles by motion control under ac field, Journal of the Society of Powder Technology, Japan, vol. 45, pp. 387–394.10.4164/sptj.45.387 ↗
39. 39) Kittaka, S. and Murata, Y. (1976): A new system for measuring the charging tendency of solid particles, Journal of Electrostatics, vol. 2, pp. 111–119.10.1016/0304-3886(76)90002-4 ↗
40. 40) Murata, Y. (1979): Photoelectric emission and contact charging of some synthetic high polymers, Japanese Journal of Applied Physics, vol. 18, pp. 1–8.10.1143/JJAP.18.1 ↗
41. 41) Yoshida, H., Fukuzono, T. and Masuda, H. (1991): Measurement of contact potential difference between a powder bed and a metal, Journal of the Society of Powder Technology, Japan, vol. 28, pp. 226–231.10.4164/sptj.28.226 ↗
42. 42) Yoshida, H., Fukuzono, T., Ami, H., Iguchi, Y. and Masuda, H. (1992): The effect of the surface modification of particles on the contact potential difference between a powder bed and metal, Journal of the Society of Powder Technology, Japan, vol. 29, pp. 504–510.10.4164/sptj.29.504 ↗
43. 43) Itakura, T., Masuda, H., Ohtsuka, C. and Matsusaka, S. (1996): The contact potential difference of powder and the tribo-charge, Journal of Electrostatics, vol. 38, pp. 213–226.10.1016/S0304-3886(96)00026-5 ↗
44. 44) Higashiyama, Y., Ujiie, Y. and Asano, K. (1997): Tribo-electrification of plastic particles on a vibrating feeder laminated with a plastic film, Journal of Electrostatics, vol. 42, pp. 63–68.10.1016/S0304-3886(97)00131-9 ↗
45. 45) Tanoue, K., Morita, K., Maruyama, H. and Masuda, H. (2001): Influence of functional group on the electrification of organic pigments, AIChE Journal, vol. 47, pp. 2419–2424.10.1002/aic.690471106 ↗
46. 46) Rowley, G. (2001): Quantifying electrostatic interactions in pharmaceutical solid systems, International Journal of Pharmaceutics, vol. 227, pp. 47–55.10.1016/S0378-5173(01)00784-0 ↗
47. 47) Zhao, H., Castle, G.S.P. and Inculet, I.I. (2002): The measurement of bipolar charge in polydisperse powders using a vertical array of Faraday pail sensors, Journal of Electrostatics, vol. 55, pp. 261–278.10.1016/S0304-3886(01)00209-1 ↗
48. 48) Iuga, A., Calin, L., Neamtu, V., Mihalcioiu, A. and Dascalescu, L. (2005): Tribocharging of plastics granulates in a fluidized bed device, Journal of Electrostatics, vol. 63, pp. 937–942.10.1016/j.elstat.2005.03.064 ↗
49. 49) Davies, D.K. (1969): Charge generation on dielectric surfaces, British Journal of Applied Physics: Journal of Physics. D, vol. 2, pp. 1533–1537.10.1088/0022-3727/2/11/307 ↗
50. 50) Murata, Y. and Kittaka, S. (1979): Evidence of electron transfer as the mechanism of static charge generation by contact of polymers with metals, Japanese Journal of Applied Physics, vol. 18, p. 421.10.1143/JJAP.18.421 ↗
51. 51) Lee, L.-H. (1994): Dual mechanism for metal–polymer contact electrification, Journal of Electrostatics, vol. 32, pp. 1–29.10.1016/0304-3886(94)90026-4 ↗
52. 52) Bailey, A.G. (2001): The charging of insulator surfaces, Journal of Electrostatics, vol. 51/52, pp. 82–90.10.1016/S0304-3886(01)00106-1 ↗
53. 53) Gutman, E. J. and Hartmann, G. C. (1992): Triboelectric properties of two-component developers for xerography, Journal of Imaging Science and Technology, vol. 36, pp. 335–349.
54. 54) Anderson, J.H. (1994): A comparison of experimental data and model predictions for tribocharging of two-component electrophotographic developers, Journal of Imaging Science and Technology, vol. 38, pp. 378–382.
55. 55) Cotler, P., Castle, G.S.P. and Schein, L.B. (1995): General model of sphere–sphere insulator contact electrification, Journal of Electrostatics, vol. 36, pp. 165–173.10.1016/0304-3886(95)00043-7 ↗
56. 56) Fabish, T.J. and Duke, C.B. (1977): Molecular charge states and contact charge exchange in polymers, Journal of Applied Physics, vol. 48, pp. 4256–4266.10.1063/1.323412 ↗
57. 57) Duke, C.B. and Fabish, T.J. (1978): Contact electrification of polymers: a quantitative model, Journal of Applied Physics, vol. 49, pp. 315–321.10.1063/1.324388 ↗
58. 58) Yanagida, K., Okada, O. and Oka, K. (1993): Low-energy electronic states related to contact electrification of pendant-group polymers: photoemission and contact potential difference measurement, Japanese Journal of Applied Physics, vol. 32, pp. 5603–5610.10.1143/JJAP.32.5603 ↗
59. 59) Yoshida, M., Ii, N. Shimosaka, A., Shirakawa, Y. and Hidaka, J. (2006): Experimental and theoretical approaches to charging behavior of polymer particles, Chemical Engineering Science, vol. 61, pp. 2239–2248.10.1016/j.ces.2004.06.052 ↗
60. 60) Shirakawa, Y., Ii, N., Yoshida, M., Takashima, R., Shimosaka, A. and Hidaka, J. (2008): Quantum chemical calculation of electron transfer at metal/polymer interfaces, Journal of the Society of Powder Technology, Japan, vol. 45, pp. 366–372.10.4164/sptj.45.366 ↗
61. 61) Matsusaka, S., Ghadiri, M. and Masuda, H. (2000): Electrification of an elastic sphere by repeated impacts on a metal plate, Journal of Physics D: Applied Physics, vol. 33, pp. 2311–2319.10.1088/0022-3727/33/18/316 ↗
62. 62) Matsusaka, S., Nishida, T., Gotoh, Y. and Masuda, H. (2003): Electrification of fine particles by impact on a polymer film target, Advanced Powder Technology, vol. 14, pp. 127–138.10.1163/156855203762469939 ↗
63. 63) Matsuyama, T. and Yamamoto, H. (1995): Charge relaxation process dominates contact charging of a particle in atmospheric conditions, Journal of Physics D: Applied Physics, vol. 28, pp. 2418–2423.10.1088/0022-3727/28/12/005 ↗
64. 64) Matsuyama, T. and Yamamoto, H. (1995): Characterizing the electrostatic charging of polymer particles by impact charging experiments, Advanced Powder Technology, vol. 6, pp. 211–220.10.1016/S0921-8831(08)60529-4 ↗
65. 65) Paschen, F. (1889): Ueber die zum Funkenübergang in Luft, Wasserstoff und Kohlensäure bei verschiedenen Drucken erforderliche Potentialdifferenz, Annalen der Physik, vol. 273, pp. 69–96.10.1002/andp.18892730505 ↗
66. 66) Bailey, A.G. (1993): Charging of solids and powders, Journal of Electrostatics, vol. 30, pp. 167–180.10.1016/0304-3886(93)90072-F ↗
67. 67) Masui, N. and Murata, Y. (1983): Electrification of polymer particles by impact on a metal plate, Japanese Journal of Applied Physics, vol. 22, pp. 1057–1062.10.1143/JJAP.22.1057 ↗
68. 68) Masui, N. and Murata, Y. (1984): Mechanisms of charge build-up on a polymer particle by repeated impact, Japanese Journal of Applied Physics, vol. 23, pp. 550–555.10.1143/JJAP.23.550 ↗
69. 70) Matsuyama, T. and Yamamoto, H. (1989): Charge transfer between a single polymer particle and a metal plate due to impact, KONA Powder and Particle Journal, No. 7, pp. 15–21.10.14356/kona.1989005 ↗
70. 71) Matsuyama, T. and Yamamoto, H. (1994): Charge transfer between a polymer particle and a metal plate due to impact, IEEE Transactions on Industry Applications, vol. 30, pp. 602–607.10.1109/28.293706 ↗
71. 72) Matsuyama, T. and Yamamoto, H. (1995): Electrification of single polymer particles by successive impacts with metal targets, IEEE Transactions on Industry Applications, vol. 31, pp. 1441–1445.10.1109/28.475738 ↗
72. 73) Matsuyama, T. and Yamamoto, H. (1997): Charge-relaxation process dominates contact charging of a particle in atmospheric condition: II. The general model, Journal of Physics D: Applied Physics, vol. 30, pp. 2170–2175.10.1088/0022-3727/30/15/008 ↗
73. 74) Matsuyama, T., Ogu, M., Yamamoto, H., Marijnissen, J. C. M. and Scarlett, B. (2003): Impact charging experiments with single particles of hundred micrometre size, Powder Technology, vol. 135/136, pp. 14–22.10.1016/S0032-5910(03)00154-2 ↗
74. 75) Watanabe, H., Samimi, A., Ding, Y. L., Ghadiri, M., Matsuyama, T. and Pitt, K.G. (2006): Measurement of charge transfer due to single particle impact, Particle & Particle Systems Characterization, vol. 23, pp. 133–137.10.1002/ppsc.200601021 ↗
75. 76) Watanabe, H., Ghadiri, M., Matsuyama, T., Ding, Y.L., Pitt, K.G., Maruyama, H., Matsusaka, S. and Masuda, H. (2007): Triboelectrification of pharmaceutical powders by particle impact, International Journal of Pharmaceutics, vol. 334, pp. 149–155.10.1016/j.ijpharm.2006.11.005 ↗
76. 77) Watanabe, H., Ghadiri, M., Matsuyama, T., Ding, Y. L. and Pitt, K.G. (2007): New instrument for tribocharge measurement due to single particle impacts, Review of Scientific Instruments, vol. 78, 024706.10.1063/1.2671585 ↗
77. 78) Ema, A. Yasuda, D., Tanoue, K. and Masuda, H. (2003): Tribo-charge and rebound characteristics of particles impact on inclined or rotating metal target, Powder Technology, vol. 135/136, pp. 2–13.10.1016/S0032-5910(03)00153-0 ↗
78. 79) Ireland, P.M. (2010): Triboelectrification of particulate flows on surfaces: Part I—Experiments, Powder Technology, vol. 198, pp. 189–198.10.1016/j.powtec.2009.11.017 ↗
79. 80) Ireland, P.M. (2010): Triboelectrification of particulate flows on surfaces: Part II—Mechanisms and models, Powder Technology, vol. 198, pp. 199–210.10.1016/j.powtec.2009.11.008 ↗
80. 81) Cole, B.N., Baum, M.R. and Mobbs, F.R. (1969–1970): An investigation of electrostatic charging effects in high-speed gas–solids pipe flows, Proceedings Institution of Mechanical Engineers, vol. 184, pp. 77–83.10.1243/PIME_CONF_1969_184_082_02 ↗
81. 82) Masuda, H., Komatsu, T. and Iinoya, K. (1976): The static electrification of particles in gas–solids pipe flow, AIChE Journal, vol. 22, pp. 558–564.10.1002/aic.690220320 ↗
82. 83) Cartwright, P., Singh, S., Bailey, A.G. and Rose, L.J. (1985). Electrostatic charging characteristics of polyethylene powder during pneumatic conveying, IEEE Transactions on Industry Applications, vol. IA-21, pp. 541–546.10.1109/TIA.1985.349702 ↗
83. 84) Nieh, S. and Nguyen, T. (1988): Effects of humidity, conveying velocity, and particle size on electrostatic charges of glass beads in a gaseous suspension flow, Journal of Electrostatics, vol. 21, pp. 99–114.10.1016/0304-3886(88)90021-6 ↗
84. 85) Gajewski, A. (1989): Measuring the charging tendency of polystyrene particles in pneumatic conveyance, Journal of Electrostatics 23, pp. 55–66.10.1016/0304-3886(89)90032-6 ↗
85. 86) Masuda, H., Matsusaka, S. and Nagatani, S. (1994): Measurements of powder flow rate in gas–solids pipe flow based on the static electrification of particles, Advanced Powder Technology, vol. 5, pp. 241–254.10.1163/156855294X00320 ↗
86. 87) Masuda, H., Matsusaka, S., Akiba, S. and Shimomura, H. (1998): Electrification of fine particles in gas–solids pipe flow, KONA Powder and Particle Journal, No. 16, pp. 216–222.10.14356/kona.1998024 ↗
87. 88) Masuda, H., Matsusaka, S. and Shimomura, H. (1998): Measurement of mass flow rate of polymer powder based on static electrification of particles, Advanced Powder Technology, vol. 9, pp. 169–179.10.1016/S0921-8831(08)60585-3 ↗
88. 89) Matsusaka, S., Umemoto, H., Nishitani, M. and Masuda, H. (2002): Electrostatic charge distribution of particles in gas–solids pipe flow, Journal of Electrostatics, vol. 55, pp. 81–96.10.1016/S0304-3886(01)00185-1 ↗
89. 90) Matsuyama, T. and Yamamoto, H. (2008): Maximum electrostatic charge of powder in pipe flow, Journal of the Society of Powder Technology, Japan, vol. 45, pp. 373–379.10.4164/sptj.45.373 ↗
90. 91) Matsusaka, S., Oki, M. and Masuda, H. (2007): Control of electrostatic charge on particles by impact charging, Advanced Powder Technology, vol. 18, pp. 229–244.10.1163/156855207780208673 ↗
91. 92) Matsusaka, S., Ando, K. and Tanaka, Y. (2008): Development of electrostatic charge controller for particles in gases using centrifugal contact, Journal of the Society of Powder Technology, Japan, vol. 45, pp. 380–386.10.4164/sptj.45.380 ↗