journal article·2010Open access

Forming and Microstructure Control of Ceramics by Electrophoretic Deposition (EPD)

Yoshio Sakka, Tetsuo Uchikoshi

KONA Powder and Particle Journal· Volume 28· Issue 0

Abstract

Electrophoretic deposition (EPD) is one of the colloidal processes during in ceramic production and has gained significant interest because of the high versatility of its use with different materials including nanoparticles and its cost-effectiveness requiring simple equipment. Of the major parameters for ceramic processing involving the EPD, preparation of the suspensions and application methods of electric fields are particularly important factors that affect the microstructure. At the beginning of this review, we introduce the fundamental aspects of the EPD processing. We then focus on the following four points: (1) the stability of the Pb(Zr,Ti)O2 /ethanol suspension by the addition of phosphate esters and its influence on the subsequent EPD process, (2) the stability of a TiO2/(2-propanal+2.4−pentanedione) suspension, which is a suspension without dispersants, (3) the film performance of the pulsed direct current EPD using an aqueous suspension, and (4) the laminated textured ceramics by EPD in a strong magnetic field.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrophoretic Deposition in Materials Science · Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute for Materials Science

Funding

Ministry of Education, Culture, Sports, Science and Technology

References (79)

Show source-provided references
1. 1) Sarkar, P. and Nicholson, P. S. (1996): Electrophoretic deposition (EPD): Mechanisms, kinetics, and application to ceramics, J. Am. Ceram. Soc., 79, pp. 1987–1996.10.1111/j.1151-2916.1996.tb08929.x ↗
2. 2) Boccaccini, A. R. (2006): J. Ceram. Soc. Jpn., 114, pp.1–14.10.2109/jcersj.114.1 ↗
3. 3) Van der Biest and Vandeperre, L. J. (1999): Annual Rev. Mater. Sci. 29, pp.327–352.10.1146/annurev.matsci.29.1.327 ↗
4. 4) Zhitomirsky, I. (2002): Cathodic electrophoretic deposition of ceramics and organoceramic materials-fundamental aspects, Adv. Colloid Interface Sci. 97, pp. 279–317.10.1016/S0001-8686(01)00068-9 ↗
5. 5) Besra, L. and Liu, M. (2007): A review of fundamentals and applications of electrophoretic deposition (EPD), Prog. Mater. Sci., 52, pp. 1–61.10.1016/j.pmatsci.2006.07.001 ↗
6. 6) Ferrari, B. and Moreno, R. (2010): EPD kinetics: A review, J. Europ. Ceram. Soc., 30, pp. 1069–1078.10.1016/j.jeurceramsoc.2009.08.022 ↗
7. 7) Corni, I., Ryan, M.P. and Boccaccini, A. R. (2008): Electrophoretic deposition: From traditional ceramics to nanotechnology, J. Europ. Ceram. Soc., 28, pp. 1353–1367.10.1016/j.jeurceramsoc.2007.12.011 ↗
8. 8) Lange, F. F. (1989): Powder Processing Science and technology for Increased Reliability, J. Am. Ceram. Soc., 72, pp.3–15.10.1111/j.1151-2916.1989.tb05945.x ↗
9. 9) Sakka, Y. (2006): Fabrication of highly microstructure controlled ceramics by novel colloidal processing, J. Ceram. Soc. Jpn., 114, pp.371–376.10.2109/jcersj.114.371 ↗
10. 10) Tang, F. Q., Uchikoshi, T., Ozawa, K, and Sakka, Y. (2006): Effect of polyethylenimine on the dispersion and electrophoretic deposition of nano-sized titania aqueous suspensions, J. Europ. Ceram. Soc., 26, pp. 1555–1560.10.1016/j.jeurceramsoc.2005.03.240 ↗
11. 11) Zhu, X. W., Uchikoshi, T., Suzuki, T.S. and Sakka, Y. (2007): Effect of polyethylenimine on hydrolysis and dispersion properties of aqueous Si3N4 suspensions, J. Am. Ceram. Soc., 90, pp.797–804.10.1111/j.1551-2916.2007.01491.x ↗
12. 12) Iijima, M. and Kamiya, H. (2009): Surface Modification for Improving the Stability of Nanoparticles in Liquid Media, KONA Powder and Particle Journal, No. 27, pp. 119–129.10.14356/kona.2009012 ↗
13. 13) Uchikoshi, T. Sakka, Y. Ozawa, K. and Hiraga, K. (1998): Pressure Filtration and Sintering of Fine Zirconia Powder, J. Europ. Ceram. Soc., 18, pp.669–674.10.1016/S0955-2219(97)00171-4 ↗
14. 14) Hirata, Y. and Tanaka, Y. (2008): Pressure filtration model of ceramic nanoparticles, J. Am. Ceram. Soc., 91, pp. 819–824.10.1111/j.1551-2916.2007.02204.x ↗
15. 15) Uchikoshi, T., Hatton, B. D., Sakka, Y. and Nicholson, P. S. (2002): Electrical Conductivity of a 3Y-TZP/Alumina Laminate Composite Synthesized by Electrophoretic Deposition, J. Ceram. Soc. Jpn., 110, pp.959–962.10.2109/jcersj.110.959 ↗
16. 16) Abe, N. Hoshino, M., Kitamura, N., Ichiryu, A. and Idemoto, Y. (2010): Preparation and estimation of Ba0.9Sr0.1TiO3 dielectric films by EPD method with fine powder slurry, J. Ceram. Soc. Jpn., 118, pp. 374–379.10.2109/jcersj2.118.374 ↗
17. 17) Jeong, S. J., Kim, M. S., Kim, I.S. and Cho, K. H. (2010): Electric properties of 0.2Pb(Mg1/3Nb2/3)O3–0.8Pb(Zr0.475Ti0.525)O3 thick film fabricated by electrophoresis deposition, J. Ceram. Soc. Jpn., 118, pp. 283–290.
18. 18) Wanga, J.Q. and Kuwabara, M. (2008): Electrophoretic deposition of BaTiO3 films on a Si substrate coated with conducting polyaniline layers, J. Europ. Ceram. Soc., 28, pp. 101–108.10.1016/j.jeurceramsoc.2007.05.020 ↗
19. 19) Doungdaw, S., Uchikoshi, T., Noguchi, Y., Eamchotchawalit and Sakka, Y. (2005): Electrophoretic deposition of lead zirconate titanate (PZT) powder from ethanol suspension prepared with phosphate ester, Sci. Technol. Adv. Mater., 6, pp. 927–932.10.1016/j.stam.2005.09.002 ↗
20. 20) Khoo, E., Lee, P. S. and Ma, J. (2010): Electrophoretic deposition (EPD) of WO3 nanorods for electrochromic application, J. Europ. Ceram. Soc., 30, pp. 1139–1144.10.1016/j.jeurceramsoc.2009.05.014 ↗
21. 21) Ferrari, B., Moreno, R., Hernan, L., Melero, M., Morales, J. and Caballero, A. (2007): EPD of thick films for their application in lithium batteries, J. Europ. Ceram. Soc., 27, pp. 3823–3827.10.1016/j.jeurceramsoc.2007.02.051 ↗
22. 22) Yoshida, K. (2010): Development of silicon carbide fiber-reinforced silicon carbide matrix composites with high performance based on interfacial and micro-structure control, J. Ceram. Soc. Jpn., 118, pp. 82–90.10.2109/jcersj2.118.82 ↗
23. 23) Matsuda, A., Kambayashi, T., Daiko, Y., Muto, H. and Sakai, M. (2010): Electrophoretic deposition of surface-modified titanate nanosheets via layer-by-layer assembly and deposited film properties, J. Europ. Ceram. Soc., 30, pp. 1151–1158.10.1016/j.jeurceramsoc.2009.09.012 ↗
24. 24) Santillan, M. J., Caneiro, A. Quaranta, N. and Boccaccini, A. R. (2010): Electrophoretic deposition of La0.6Sr0.4Co0.8Fe0.2O3-delta cathodes on Ce0.9Gd0.1O1.95 substrates for intermediate temperature solid oxide fuel cell (IT-SOFC), J. Europ. Ceram. Soc., 30, pp. 1125–1132.10.1111/j.1744-7402.2009.02413.x ↗
25. 25) Bozza, F., Polini, R. and Traversa, E. (2009): Electrophoretic Deposition of Dense La0.8Sr0.2Ga0.8Mg0.115Co0.085O3-delta Electrolyte Films from Single-Phase Powders for Intermediate Temperature Solid Oxide Fuel Cells, J. Am. Ceram. Soc., 92, pp.1999–2004.10.1111/j.1551-2916.2009.03154.x ↗
26. 26) Suzuki, H.T., Uchikoshi, T., Kayashi, K., Suzuki, T.S., Sugiyama, T., Furuya, K., Matsuda, M., Sakka, Y. and Munakata, F. (2009): Fabrication of GDC/LSGM/GDC tri-layers on polypyrrole-coated NiO-YSZ by electrophoretic deposition for anode-supported SOFC, J. Ceram. Soc. Jpn., 117, pp. 1246–1248.10.2109/jcersj2.117.1246 ↗
27. 27) Kitabatake, T., Uchikoshi, T., Munakata, F., Sakka, Y. and Hirosaki, N. (2010): Emission color tuning of laminated and mixed SiAlON phosphor films by electrophoretic deposition, J. Ceram. Soc. Jpn., 118, pp. 1–4.10.2109/jcersj2.118.1 ↗
28. 28) Kitabatake, T., Uchikoshi, T., Munakata, F., Sakka, Y. and Hirosaki, N. (2009): electrophoretic deposition of Eu2+ doped Ca-alpha-SiAlON phosphor particles for packaging of flat pseudo-white light emitting devices, J. Ceram. Soc. Jpn., 117, pp. 740–743.10.2109/jcersj2.116.740 ↗
29. 29) Hamagami, J., Hasegawa, K. and Kanamura, K. (2006): Micropattern of colloidal crystal by using electrophoretic deposition process with three-electrode system, Key Eng. Mater., 320, pp. 171–174.10.4028/www.scientific.net/KEM.320.171 ↗
30. 30) Uchikoshi, T., Furumi, S., Shirahata, N., Suzuki, T. S. and Sakka, Y. (2006): Electrophoretic deposition of alumina on conductive polymer-coated ceramic substrates, J. Ceram. Soc. Jpn., 114, pp. 55–58.10.2109/jcersj.114.55 ↗
31. 31) Uchikoshi, T., Furumi, S., Shirahata, N., Suzuki, T. S. and Sakka, Y. (2008): Conductive polymer coating on nonconductive ceramic substrates for use in the electrophoretic deposition process, J. Am. Ceram. Soc., 91, pp. 1674–1677.10.1111/j.1551-2916.2007.02228.x ↗
32. 32) Put, S., Vleugels, J. and Van der Biest, O. (2003): Acta Mater., 51, pp. 6303–6317.10.1016/S1359-6454(03)00463-4 ↗
33. 33) Ferrari, B. and Moreno, R. (1996): The conductivity of aqueous Al2O3 slips for electrophoretic deposition, Mater. Letter., 28, pp.353–355.10.1016/0167-577X(96)00075-4 ↗
34. 34) Ferrari, B. and Moreno, R. (1997): Electrophoretic deposition of aqueous alumina, J. Europ. Ceram. Soc., 17, pp.549–556.10.1016/S0955-2219(96)00113-6 ↗
35. 35) Hirata, Y., Nishimoto, A. and Ishihara, Y. (1991): J. Ceram. Soc. Jpn., 99, pp.108.10.2109/jcersj.99.108 ↗
36. 36) Fisher, R., Fisher, E., De Portu, D. and Roncari, E. (1995): Preparation of ceramic micro-laminate by electrophoresis in aqueous system, J. Mater. Sci. Lett., 14, pp. 25–27.10.1007/BF02565275 ↗
37. 37) Uchikoshi, T., Ozawa, K., Hatton, B. D., Okuyama, H. and Sakka, Y. (2001): Dense, bubble-free ceramic deposits from aqueous suspensions by electrophoretic deposition, J. Mater. Res., 16, pp. 321–324.10.1557/JMR.2001.0048 ↗
38. 38) Tang, F. Q., Sakka, Y. and Uchikoshi, T. (2003): Electrophoretic deposition of aqueous nano-sized zinc oxide suspensions on a zinc electrode, Mater. Res. Bull., 38, pp. 207–212.10.1016/S0025-5408(02)01029-2 ↗
39. 39) Tang, F. Q., Uchikoshi, T. and Sakka, Y. (2002): Electrophoretic deposition behavior of aqueous nanosized zinc oxide suspensions, J. Am. Ceram. Soc., 85, pp. 2161–2165.10.1111/j.1151-2916.2002.tb00428.x ↗
40. 40) Tang, F. Q., Uchikoshi, T. and Sakka, Y. (2002): Electrophoretic deposition of aqueous nano-gamma-Al2O3 suspensions, Mater. Res. Bull., 37, pp. 653–660.10.1016/S0025-5408(02)00693-1 ↗
41. 41) Kawakita, M., Uchikoshi, T., Kawakita, J. and Sakka, Y. (2009): Preparation of Crystalline-Oriented Titania Photoelectrodes on ITO Glasses from a 2-Propanol-2,4-Pentanedione Solvent by Electrophoretic Deposition in a Strong Magnetic Field, J. Am. Ceram. Soc., 92, pp.984–989.10.1111/j.1551-2916.2009.02947.x ↗
42. 42) Kawakita, M., Kawakita, J., Uchikoshi, T. and Sakka, Y. (2009): Photoanode characteristics of dye-sensitized solar cell containing TiO2 layers with different crystalline orientations, J. Mater. Res., 24, pp.1417–1421.10.1557/jmr.2009.0157 ↗
43. 43) Yamashita, K., Nagai, M. and Umakoshi, M. (1997): Fabrication of green films of single and multi-component ceramic composites by electrophoretic deposition technique, J. Mater. Sci., 32, pp.6661–4.10.1023/A:1018608605080 ↗
44. 44) Besra, L., Uchikoshi, T., Suzuki, T. S. and Sakka, Y. (2008): Bubble-Free Aqueous Electrophoretic Deposition (EPD) by Pulse-Potential Application, J. Am. Ceram. Soc., 91, pp.3154–3159.10.1111/j.1551-2916.2008.02591.x ↗
45. 45) Besra, L., Uchikoshi, T., Suzuki, T. S. and Sakka, Y. (2010): Experimental verification of pH localization mechanism of particle consolidation at the electrode/solution interface and its application to pulsed DC electrophoretic deposition (EPD), J. Europ. Ceram. Soc., 30, pp. 1187–1193.10.1016/j.jeurceramsoc.2009.07.004 ↗
46. 46) Besra, L., Uchikoshi, T., Suzuki, T. S. and Sakka, Y. (2009): Application of constant current pulse to suppress bubble incorporation and control deposit morphology during aqueous electrophoretic deposition (EPD), J. Europ. Ceram. Soc., 29, pp. 1837–1845.10.1016/j.jeurceramsoc.2008.07.031 ↗
47. 47) Naim, M. Kuwata, M., Kamiya, H. and Lenggoro, I.W. (2009): Deposition of TiO2 nanoparticles in surfactant-containing aqueous suspension by a pulsed DC charging-mode electrophoresis, J. Ceram. Soc. Jpn., 117, pp.127–132.10.2109/jcersj2.117.127 ↗
48. 48) Neirinck, B., Fransauer, J., Van der Biest, O. and Vlengels, J. (2009): Electrochem. Comm., 11, pp.57–6010.1016/j.elecom.2008.10.028 ↗
49. 49) Mishra, M., Bhattacharjee, S., Besra, L., Sharma, H.S., Uchikoshi, T. and Sakka, Y. (2010): Effect of pH localization on microstructure evolution of deposits during aqueous electrophoretic deposition (EPD), J. Europ. Ceram. Soc., 30, pp. 2467–2473.10.1016/j.jeurceramsoc.2010.04.034 ↗
50. 50) Messing, G. L., Trolier-McKinstry, S., Sabolsky, E. M., Duran, C., Kwon, S., Brahmaroutu, B., Park, P., Yilmaz, H., Rehrig, P. W., Eitel, K. B., Suvaci, E., Seabaugh, M. and Oh, K. S. (2004): Critical Rev. Solid State Mater. Sci., Vol. 29, pp. 45–96.10.1080/10408430490490905 ↗
51. 51) Zhu, X.W. and Sakka, Y. (2008): Textured silicon nitride: processing and anisotropic properties, Sci. Technol. Adv. Mater., 9, 033001.10.1088/1468-6996/9/3/033001 ↗
52. 52) Sakka, Y. and Suzuki, T. S. (2005): Textured development of feeble magnetic ceramics by colloidal processing under high magnetic field, J. Ceram. Soc. Jpn., 113, pp. 26–36.10.2109/jcersj.113.26 ↗
53. 53) Suzuki, T. S., Sakka, Y. and Kitazawa, K., (2001): Orientation Amplification of Colloidally Filtrated Alumina in a Strong Magnetic Field by Sintering, Adv. Eng. Mater., 3, pp. 490–492.10.1002/1527-2648(200107)3:7<490::AID-ADEM490>3.3.CO;2-F ↗
54. 54) Suzuki, T. S. and Sakka, Y. (2005): Preparation of oriented bulk 5 wt% Y2O3-AlN ceramics by slip casting in a high magnetic field and sintering, Scripta Mater., 52, pp. 583–586.10.1016/j.scriptamat.2004.11.033 ↗
55. 55) Zhu, X. W., Suzuki, T. S., Uchikoshi, T., Nishimura, T. and Sakka, Y. (2006): Texture development in Si3N4 ceramics by magnetic field alignment during slip casting, J. Ceram. Soc. Jpn., 114, pp.1093–1096.10.2109/jcersj.114.979 ↗
56. 56) Zhu, X. W., Suzuki, T. S., Uchikoshi, T, and Sakka, Y. (2007): Texturing Ca-alpha-sialon via strong magnetic field alignment, J. Ceram. Soc. Jpn., 115, pp. 701–705.10.2109/jcersj2.115.701 ↗
57. 57) Zhu, X. W., Suzuki, T. S., Uchikoshi, T. and Sakka, Y. (2008): Highly texturing beta-sialon via strong magnetic field alignment, J. Am. Ceram. Soc., 91, pp. 620–623.10.1111/j.1551-2916.2007.02125.x ↗
58. 58) Suzuki, T. S., Uchikoshi, T. and Sakka, Y. (2007): Fabrication of textured alpha-SiC using colloidal processing and a strong magnetic field, Mater. Trans., 48, pp. 2883–2887.10.2320/matertrans.MI200716 ↗
59. 59) Tsuda, K. and Sakka, Y. (2009): Simultaneous alignment and micropatterning of carbon nanotubes using modulated magnetic field, Sci. Technol. Adv. Mater., 10, 014603.10.1088/1468-6996/10/1/014603 ↗
60. 60) Yamauchi, Y, Sugiyama, A, Sawada, M, Komatsu. M., Takai, A, Urata, C., Hirota, N., Sakka, Y. and Kuroda, K. (2008): Magnetically induced orientation of meso-channels inside porous anodic alumina membranes under ultra high magnetic field of 30 T: Confirmation by TEM, J. Ceram. Soc. Jpn., 116, pp.1244–1248.10.2109/jcersj2.116.1244 ↗
61. 61) Furumi, S., Uchikoshi, T., Shirahata, N., Suzuki, T.S. and Sakka, Y. (2009): Aqueous Dispersions of Carbon Nanotubes Stabilized by Zirconium Acetate, J. NanoSci. NanoTechnol., 9, pp. 662–665.10.1166/jnn.2009.J004 ↗
62. 62) Makiya, A., Kusano, D., Tanaka, S., Uchida, N., Uematsu, K., Kimura, T. and Kitazawa, K. (2003): Particle oriented bismuth titanate ceramics made in high magnetic field, J. Ceram. Soc. Jpn. 111, pp.702.10.2109/jcersj.111.702 ↗
63. 63) Tabara, K., Makiya, A., Tanak, S., Uematsu, K. and Doshida, Y. (2007): Particle oriented strontium bismuth titanate ceramics prepared by using high magnetic field and subsequent reaction sintering, J. Ceram. Soc. Jpn., 115, pp. 237–240.10.2109/jcersj.115.237 ↗
64. 64) Kaga, H., Kinemuchi, Y., Tanaka, S., Makiya, A., Kato, Z., Uematsu, K., and Watari, K. (2006): Fabrication of c-axis oriented Zn0.98Al0.02O by a high-magnetic-field via gelcasting and its thermoelectric properties, J. Ceram. Soc. Jpn., 114, pp.1085–1088.10.2109/jcersj.114.1085 ↗
65. 65) Sakka, Y., Suzuki, T. S. and Uchikoshi, T. (2008): Fabrication and some properties of textured alumina-related compounds by colloidal processing in high-magnetic field and sintering, J. Europ. Ceram. Soc., 28, pp. 935–942.10.1016/j.jeurceramsoc.2007.09.039 ↗
66. 66) Sakka, Y., Honda, A., Suzuki, T. S. and Moriyoshi, Y. (2004): Fabrication of Oriented β- Alumina from Porous Bodies by Slip Casting in a High Magnetic Field, Solid State Ionics, 172, pp. 341–344.10.1016/j.ssi.2004.02.049 ↗
67. 67) Sakka, Y., Suzuki, T. S., Tanabe, N., Asai, S. and Kitazawa, K. (2002): Alignment of titania whisker by colloidal filtration in a high magnetic field, Jpn. J. Appl. Phys., 41, pp. L1416–L141810.1143/JJAP.41.L1416 ↗
68. 68) Wu, C. Y.., Li, S. Q., Sassa, K., Sakka, Y., Suzuki, T. S. and Asai, S. (2005): The crystal orientation taking account of gravity force under high magnetic field, ISIJ Inter., 45, pp, 997–1000.10.2355/isijinternational.45.997 ↗
69. 69) Hirata, Y., Nakagama, S. and Ishihara, Y. (1990): J. Mater. Res., Vol. 5, pp. 640–646.10.1557/JMR.1990.0640 ↗
70. 70) Uchikoshi, T., Suzuki, T. S., Okuyama, H. and Sakka, Y. (2003): Electrophoretic deposition of alpha-alumina particles in a strong magnetic field, J. Mater. Res., Vol. 18, pp. 254–256.10.1557/JMR.2003.0035 ↗
71. 71) Uchikoshi, T., Suzuki, T. S., Okuyama, H. and Sakka, Y. (2004): Crystalline-oriented TiO2 fabricated by the electrophoretic deposition in a strong magnetic field Ceramic Inter., 30, pp1975–1978.10.1016/j.ceramint.2003.12.179 ↗
72. 72) Uchikoshi, T., Iimura, S., Suzuki, T. S. and Sakka, Y. (2006): Control of crystalline texture in polycrystalline TiO2 (anatase) by electrophoretic deposition in a strong magnetic field, J. Europ. Ceram. Soc., Vol. 26, pp. 559–563.10.1016/j.jeurceramsoc.2005.06.044 ↗
73. 73) Suzuki, T. S., Uchikoshi, T., Okuyama, H. and Sakka, Y. (2006): Mechanical properties of textured, multilayered alumina produced using electrophoretic deposition in a strong magnetic field, J. Europ. Ceram. Soc., 26, pp. 661–665.10.1016/j.jeurceramsoc.2005.07.042 ↗
74. 74) Uchikoshi, T., Suzuki, T. S., Okuyama, H., Sakka, Y. and Nicholson, P. S. (2004): Electrophoretic deposition of alumina suspension in a strong magnetic field, J. Europ. Ceram. Soc., 24, pp. 225–229.10.1016/S0955-2219(03)00242-5 ↗
75. 75) Uchikoshi, T., Suzuki, T. S. and Sakka, Y. (2006): Crystalline orientation of alumina ceramics prepared by electrophoretic deposition under a high magnetic field, J. Mater. Sci., 41, pp.8074–8078.10.1007/s10853-006-0597-3 ↗
76. 76) Kimura, M., Shiratsuyu, K., Ando, A., Suzuki, T. S. and Sakka, Y. (2007): Layer structure of textured CaBi4Ti4O15 ceramics fabricated by slip casting in high magnetic field, J. Am. Ceram. Soc., 90, pp.1463–1466.10.1111/j.1551-2916.2007.01579.x ↗
77. 77) Tanaka, S., Tomita, Y., Furushima, R., Shimizu, H., Doshida, Y. and Uemastu, K, (2008): Fabrication of crystal-oriented barium bismuth titanate ceramics in high magnetic field and subsequent reaction sintering, Sci. Technol. Adv. Mater., 10, 01-4602.10.1088/1468-6996/10/1/014602 ↗
78. 78) Horii, S., Ishihara, A., Fukushima, T., Uchikoshi, T., Ogino, H, Suzuki, T. S, Sakka, Y., Shimoyama, J. and Kishio, K. (2009): Magnetic orientation and magnetic anisotropy in paramagnetic layered oxides containing rare-earth ions, Sci. Technol. Adv. Mater., 10, 014604.10.1088/1468-6996/10/1/014604 ↗
79. 79) Hori, S., Kumagai, T., Uchikoshi, T., H. Suzuki, T. S, Sakka, Y., Shimayama, (2007): Improvement of thermoelectric performance in magnetically c-axis-oriented bismuth--based cobaltites, Scripta Mater., 57, pp. 333–336.10.1016/j.scriptamat.2007.04.022 ↗