Kinetics of Dissolution and Recrystallization of Sodium Chloride at Controlled Relative Humidity
Source abstract
Abstract
Both producers and users of divided solids regularly face the problem of caking after periods of storage and/or transport. Particle agglomeration depends not only on powder water content, temperature and applied pressure, but also on the interactions between the solid substance and water molecules present in the atmosphere, i.e. on relative humidity (RH) at which the product is stored. Ambient humidity plays an important role in most events leading to caking: capillary condensation of water at contact points between particles, subsequent dissolution of a solid and formation of a saturated solution eventually followed by precipitation of the solid during the evaporation of water. Here, we focus on the kinetics of dissolution followed by evapo-recrystallization of a hygroscopic sodium chloride powder under controlled temperature and RH, with the aim of anticipating caking by predicting rates of water uptake and loss under industrial conditions. Precise measurements of water uptake show that the rate of dissolution is proportional to the difference between the imposed RH and deliquescence RH, and follows a model based on the kinetic theory of gases. Evaporation seems to be governed by more complex phenomena related to the mechanism of crystal growth from a supersaturated salt solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Crystallization and Solubility Studies · Coagulation and Flocculation Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
UTC/ESCOM, Équipe d’Accueil “Transformations Intégrées de la Matière Renouvelable” (EA 4297)
UTC/ESCOM, Service d’Analyses Physico-Chimique
Funding
Nestlé Research Centre
References (10)
Show source-provided references
1. 1) Martin, S.T.(2000): Phase Transitions of Aqueous Atmospheric Particles, Chem. Rev., 100, pp. 403–3453.10.1021/cr990034t ↗
2. 2) Mauer, L.J. and Taylor, L.S. (2010): Water Solid Interactions: Deliquescence, Annu. Rev. Food Sci. Technol., 1, pp. 41–63.10.1146/annurev.food.080708.100915 ↗
3. 3) Tanaka, T. (1978): Evaluating the caking strength of powders, Ind. Eng. Chem. Prod. Res. Dev, 17, n°3.10.1021/i360067a013 ↗
4. 4) Peters, S.J. and Ewing, G.E. (1997): Water on salt: An infrared study of adsorbed H2O on NaCl under ambient conditions, J. Phys. Chem. B, 101, pp. 10880–10886.10.1021/jp972810b ↗
5. 5) Zasetsky, A.Y. (2008): Dissolution of solid NaCl nanoparticles embedded in supersaturated water vapor probed by molecular dynamic simulations, J. Phys. Chem., 112,pp.3114–3118.10.1021/jp709754j ↗
6. 6) Mullin, J.W. (1971): “Crystallisation”, The Butterworth Group, London.
7. 7) Apelbat, A. and Korin, E. (1998): The vapor pressure of saturated aqueous solutions of sodium chloride, sodium bromide, sodium nitrate, sodium nitrite, potassium iodate and rubidium chloride at temperatures from 227K to 323K. J. Chem. Thermodynamics, 30, pp. 59–71.10.1006/jcht.1997.0275 ↗
8. 8) Komunjer, L. and Affolter, C. (2005): Absorption/evaporation kinetics of water vapor on highly hygroscopic powder: Case of ammonium nitrate, Powder Technology, 157, pp. 67–71.10.1016/j.powtec.2005.05.012 ↗
9. 9) Komunjer, L. and Pezron, I. (2009): A new experimental method for determination of solubility and hyper-solubility of hygroscopic solid, Powder Technology, 190, pp. 75–78.10.1016/j.powtec.2008.04.060 ↗
10. 10) Tang, I.N. (1986): Water Activity Measurements with Single Suspended Droplets: The NaCl-H20 and KCIH20 Systems, Journal of Colloid and Interface Science, 114 (2), pp.409–415.10.1016/0021-9797(86)90426-1 ↗