journal article·2013Open access

Hydrostatic and Shear Behavior of Frictionless Granular Assemblies under Different Deformation Conditions

Olukayode I. Imole, Nishant Kumar, Vanessa Magnanimo, Stefan Luding

KONA Powder and Particle Journal· Volume 30· Issue 0

Abstract

Stress- and structure-anisotropy (bulk) responses to various deformation modes are studied for dense packings of linearly elastic, frictionless, polydisperse spheres in the (periodic) triaxial box element test configuration. The major goal is to formulate a guideline for the procedure of how to calibrate a theoretical model with discrete particle simulations of selected element tests and then to predict another element test with the calibrated model (parameters).Only the simplest possible particulate model material is chosen as the basic reference example for all future studies that aim at the quantitative modeling of more realistic frictional, cohesive powders. Seemingly unrealistic materials are used to exclude effects that are due to contact non-linearity, friction, and/or non-sphericity. This allows us to unravel the peculiar interplay of stress, strain, and microstructure, i.e. fabric.Different elementary modes of deformation are isotropic, deviatoric (volume-conserving), and their superposition, e.g. a uniaxial compression test. Other ring-shear or stress-controlled (e.g. isobaric) element tests are referred to, but are not studied here. The deformation modes used in this study are especially suited for the bi- and triaxial box element test set-up and provide the foundations for understanding and predicting powder flow in many other experimental devices. The qualitative phenomenology presented here is expected to be valid, even clearer and magnified, in the presence of non-linear contact models, friction, non-spherical particles and, possibly, even for strong attractive/ adhesive forces.The scalar (volumetric, isotropic) bulk properties, the coordination number and the hydrostatic pressure scale qualitatively differently with isotropic strain. Otherwise, they behave in a very similar fashion irrespective of the deformation path applied. The deviatoric stress response (i.e. stress-anisotropy), besides its proportionality to the deviatoric strain, is cross-coupled to the isotropic mode of deformation via the structural anisotropy; likewise, the evolution of pressure is coupled via the structural anisotropy to the deviatoric strain, leading to dilatancy/compactancy. Isotropic/uniaxial over-compression or pure shear respectively slightly increase or reduce the jamming volume fraction below which the packing loses mechanical stability. This observation suggests a necessary generalization of the concept of the jamming volume fraction from a single value to a “wide range” of values as a consequence of the deformation history of the granular material, as “stored/memorized” in the structural anisotropy.The constitutive model with incremental evolution equations for stress and structural anisotropy takes this into account. Its material parameters are extracted from discrete element method (DEM) simulations of isotropic and deviatoric (pure shear) modes as volume fraction dependent quantities. Based on this calibration, the theory is able to predict qualitatively (and to some extent also quantitatively) both the stress and fabric evolution in another test, namely the uniaxial, mixed mode during compression. This work is in the spirit of the PARDEM project funded by the European Union.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Brake Systems and Friction Analysis · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Multi-Scale Mechanics (MSM), Faculty of Engineering Technology, MESA+, University of Twente, Netherlands

Funding

European Union

References (59)

Show source-provided references
1. Alonso-Marroquín, F.; Luding, S.; Herrmann, H. J. and Vardoulakis, I. (2005): “Role of anisotropy in the elastoplastic response of a polygonal packing.” Phyical Review E., 71:051304:1–18.10.1103/PhysRevE.71.051304 ↗
2. Barreto, D. and O’Sullivan, C. (2012): “The influence of inter-particle friction and the intermediate stress ratio on soil response under generalised stress conditions.” Granular Matter, 14(4):505–521.10.1007/s10035-012-0354-z ↗
3. Bi, D.; Zhang, J.; Chakraborty, B. and Behringer, R. P. (2011): “Jamming by shear.” Nature, 480(7377):355–358.10.1038/nature10667 ↗
4. Cundall, P. A. and Strack, O. D. L. (1979): “A discrete numerical model for granular assemblies.” Géotechnique, 29(1):47–65.10.1680/geot.1979.29.1.47 ↗
5. Durán, O.; Kruyt, N. P. and Luding, S. (2010): “Micro-mechanical analysis of deformation characteristics of three-dimensional granular materials.” International Journal of Solids and Structures, 47(17):2234–2245.10.1016/j.ijsolstr.2010.04.014 ↗
6. Ezaoui, A. and Di Benedetto, H. (2009): “Experimental measurements of the global anisotropic elastic behaviour of dry Hostun sand during triaxial tests, and effect of sample preparation.” Géotechnique, 59(7):621–635.10.1680/geot.7.00042 ↗
7. Fredlund, D. G. (1979): “Second Canadian Geotechnical Colloquium: Appropriate concepts and technology for unsaturated soils.” Canadian Geotechnical Journal, 16(1):121–139.10.1139/t79-011 ↗
8. GdR-MiDi. (2004): “On dense granular flows.” The European Physical Journal E: Soft Matter and Biological Physics, 14(4):341–365.10.1140/epje/i2003-10153-0 ↗
9. Goddard, J. D. (1998): “Continuum Modeling of Granular Assemblies.” In Herrmann, H. J.; Hovi, J. P. and Luding, S. editors, Physics of dry granular media - NATO ASI Series E 350, pages 1–24, Dordrecht, Kluwer Academic Publishers.10.1007/978-94-017-2653-5_1 ↗
10. Goddard, J. D. (2010): “Parametric hypoplasticity as continuum model for granular media: from Stokesium to Mohr-Coulombium and beyond.” Granular Matter, 12:145–150.10.1007/s10035-010-0174-y ↗
11. Göncü, F.; Duran, O. and Luding, S. (2010): “Constitutive relations for the isotropic deformation of frictionless packings of polydisperse spheres.” C. R. Mécanique, 338(10–11):570–586.10.1016/j.crme.2010.10.004 ↗
12. Hayhurst, D. R. (1972): “Creep rupture under multi-axial states of stress.” Journal of the Mechanics and Physics of Solids, 20(6):381–382.10.1016/0022-5096(72)90015-4 ↗
13. Hertz, H. (1881): “Über die Berührung fester elastischer Körper.” Journal für die Reinen und Angewandte Mathematik, 92:156–171.10.1515/crll.1882.92.156 ↗
14. Imole, O. I.; Kumar, N. and Luding, S. (2011): “Deformation modes of packings of frictionless polydisperse spheres.” Particulate Systems Analysis Conference Proceedings, pages 1–6.
15. Jiang, Y. and Liu, M. (2009): “Granular solid hydrodynamics.” Granular Matter, 11:139–156.10.1007/s10035-009-0137-3 ↗
16. Kolymbas, D. (1991): “An outline of hypoplasticity.” Archive of Applied Mechanics, 61:143–151.10.1007/BF00788048 ↗
17. Kruyt, N. P.; Agnolin, I.; Luding, S. and Rothenburg, L. (2010): “Micromechanical study of elastic moduli of loose granular materials.” Journal of the Mechanics and Physics of Solids, 58(9):1286–1301.10.1016/j.jmps.2010.06.003 ↗
18. Kuhn, M. R. and Bagi, K. (2009): “Specimen Size Effect in Discrete Element Simulations of Granular Assemblies.” Journal of Engineering Mechanics, 135(6):485–492.10.1061/(ASCE)0733-9399(2009)135:6(485) ↗
19. Kumar, N.; Imole, O. I.; Magnanimo, V. and Luding, S. (2012a): “Predictive methods for deformation modes using constitutive modeling for frictionless spheres: Micro-macro transition to an Anisotropy model.” In preparation.
20. Kumar, N.; Imole, O. I.; Magnanimo, V. and Luding, S. (2012b): “Deformation Modes for Assemblies of Frictionless Polydisperse Spheres.” Advanced Materials Research, 508:160–165.10.4028/www.scientific.net/AMR.508.160 ↗
21. Kwade, A.; Schulze, D. and Schwedes, J. (1994): “Determination of the stress ratio in uniaxial compression tests - Part 2.” Powder Handling & Processing, 6(2):199–203.
22. La Ragione, L. and Magnanimo, V. (2012): “Contact anisotropy and coordination number for a granular assembly: A comparison of distinct element method simulations and theory.” Phyical Review E., 85:031304:1–8.10.1103/PhysRevE.85.031304 ↗
23. Luding, S. (2004): “Micro-Macro Models for Anisotropic Granular Media.” In Vermeer, P. A.; Ehlers, W.; Herrmann, H. J. and Ramm, E. editors, Modelling of Cohesive-Frictional Materials, pages 195–206, Leiden, Netherlands, Balkema.10.1201/9780203023631.ch15 ↗
24. Luding, S. (2005): “Anisotropy in cohesive, frictional granular media.” Journal of Physics: Condensed Matter, 17(24):S2623–S2640.10.1088/0953-8984/17/24/017 ↗
25. Luding, S. (2008a): “Constitutive relations for the shear band evolution in granular matter under large strain.” Particuology, 6(6):501–505.10.1016/j.partic.2008.07.020 ↗
26. Luding, S. (2008b): “The effect of friction on wide shear bands.” Particulate Science and Technology, 26(1):33–42.10.1080/02726350701759167 ↗
27. Luding, S. (2008c): “Cohesive, frictional powders: contact models for tension.” Granular Matter, 10(4):235–246.10.1007/s10035-008-0099-x ↗
28. Luding, S. (2009): “Towards dense, realistic granular media in 2D.” Nonlinearity, 22(12):R101–R146.10.1088/0951-7715/22/12/R01 ↗
29. Luding, S. and Alonso-Marroquín, F. (2011): “The critical-state yield stress (termination locus) of adhesive powders from a single numerical experiment.” Granular Matter, 13(2):109–119.10.1007/s10035-010-0241-4 ↗
30. Luding, S.; Perdahcioğlu, E. S. (2011): “A Local Constitutive Model with Anisotropy for Various Homogeneous 2D Biaxial Deformation Modes.” Chemie Ingenieur Technik, 83(5):672–688.10.1002/cite.201000180 ↗
31. Magnanimo, V.; La Ragione, L.; Jenkins, J. T.; Wang, P. and Makse, H. A. (2008): Characterizing the shear and bulk moduli of an idealized granular material, Europhysics Letters, 81(3):34006:1–6.10.1209/0295-5075/81/34006 ↗
32. Magnanimo, V. and Luding, S. (2011): “A local constitutive model with anisotropy for ratcheting under 2D axial-symmetric isobaric deformation.” Granular Matter, 13(3):225–232.10.1007/s10035-011-0266-3 ↗
33. Magnanimo, V. and Luding, S. (2012): “A 2D non-linear constitutive model with anisotropy for granular materials.”, Philosophical Magazine, (Under review).
34. Majmudar, T. S.; Sperl, M.; Luding, S. and Behringer, R. P. (2007): “Jamming Transition in Granular Systems.” Phyical Review Letters, 98(5):058001:1–4.10.1103/PhysRevLett.98.058001 ↗
35. Makse, H. A.; Johnson, D. L. and Schwartz, L. M. (2000): “Packing of compressible granular materials.” Phyical Review Letters, 84(18):4160–4163.10.1103/PhysRevLett.84.4160 ↗
36. Mašín, D. (2012): “Asymptotic behaviour of granular materials.” Granular Matter, 14:759–774.10.1007/s10035-012-0372-x ↗
37. Maxwell, J. C. (1864): “On the calculation of the equilibrium and stiffness of frames.” Philosophical Magazine, 27(182):598–604.10.1080/14786446408643668 ↗
38. Mindlin, R. D. and Deresiewicz, H. (1953): “Elastic spheres in contact under varying oblique forces.” Journal of Applied Mechanics, 75:327–344.10.1115/1.4010702 ↗
39. Morgeneyer, M. and Schwedes, J. (2003): “Investigation of powder properties using alternating strain paths.” Task Quarterly, 7(4):571–578.
40. Oda, M. (1972): “Initial fabrics and their relations to mechanical properties of granular material.” Soil and foundations, 12(1):17–36.10.3208/sandf1960.12.17 ↗
41. O’Hern, C. S.; Langer, S. A.; Liu, A. J. and Nagel, S. R. (2002): “Random packings of frictionless particles.” Phyical Review Letters, 88(7):075507:1–4.10.1103/PhysRevLett.88.075507 ↗
42. Philippe, P.; Bonnet, F. and Nicot, F. (2011): “Settlement of a granular material: boundary versus volume loading.” Granular Matter, 13(5):585–598.10.1007/s10035-011-0274-3 ↗
43. Radjai, F.; Roux, S. and Moreau, J. J. (1999): “Contact forces in a granular packing.” Chaos, 9(3):544–550.10.1063/1.166428 ↗
44. Saadatfar, M.; Sheppard, A. P.; Senden, T. J. and Kabla, A. J. (2012): “Mapping forces in a 3D elastic assembly of grains.” Journal of the Mechanics and Physics of Solids, 60(1):55–66.10.1016/j.jmps.2011.10.001 ↗
45. Samimi, A.; Hassanpour, A. and Ghadiri, M. (2005): “Single and bulk compressions of soft granules: Experimental study and DEM evaluation.” Chemical Engineering Science, 60(14):3993–4004.10.1016/j.ces.2005.02.036 ↗
46. Schwedes, J. (2003): “Review on testers for measuring flow properties of bulk solids.” Granular Matter, 5(1):1–43.10.1007/s10035-002-0124-4 ↗
47. Shaebani, M. R.; Madadi, M.; Luding, S. and Wolf, D. E. (2012): “Influence of polydispersity on micromechanics of granular materials.” Phyical Review E., 85(1):011301:1–12.10.1103/PhysRevE.85.011301 ↗
48. Spencer, A. J. M. (1980): Continuum mechanics. Dover Publishers, USA.
49. Sun, J. and Sundaresan, S. (2011): “A constitutive model with microstructure evolution for ow of rate independent granular materials.” Journal of Fluid Mechanics, 682:590–616.10.1017/jfm.2011.251 ↗
50. Thornton, C. (2010): “Quasi-static simulations of compact polydisperse particle systems.” Particuology, 8(2):119–126.10.1016/j.partic.2009.07.007 ↗
51. Thornton, C. and Anthony, S. J. (1998): “Quasistatic deformation of particulate media.” Philosophical Transactions of the Royal Society of London, Series A: Mathematical, Physical and Engineering Sciences, 356(1747):2763–2782.10.1098/rsta.1998.0296 ↗
52. Thornton, C. and Zhang, L. (2006): “A numerical examination of shear banding and simple shear non-coaxial flow rules.” Philosophical Magazine, 86(21–22):3425–3452.10.1080/14786430500197868 ↗
53. Thornton, C. and Zhang, L. (2010): “On the evolution of stress and microstructure during general 3D deviatoric straining of granular media.” Géotechnique, 60(5):333–341.10.1680/geot.2010.60.5.333 ↗
54. van Hecke, M. (2009): “Jamming of soft particles: geometry, mechanics, scaling and isostaticity.”, Journal of Physics: Condensed Matter, 22(3):033101:1–24.10.1088/0953-8984/22/3/033101 ↗
55. Walsh, S. D. C. and Tordesillas, A. (2004): “A thermomechanical approach to the development of micropolar constitutive models of granular media.” Acta Mechanica, 167(3):145–169.10.1007/s00707-003-0072-z ↗
56. Yimsiri, S. and Soga, K. (2010): “DEM analysis of soil fabric effects on behaviour of sand.” Géotechnique, 60(6):483–495.10.1680/geot.2010.60.6.483 ↗
57. Weinhart, T.; Thornton, A. R.; Luding, S. and Bokhove, O. (2012): “From discrete particles to continuum fields near a boundary.” Granular Matter, 14(2):289–294.10.1007/s10035-012-0317-4 ↗
58. Zetzener, H. and Schwedes, J. (1998): “Deformation behaviour and relaxation of bulk solids at different deformation rates.” In proceedings of the 6th International Conference on Handling and Transportation, Australia. pages 51–55.
59. Zhao, X. and Evans, T. M. (2011): “Numerical analysis of critical state behaviors of granular soils under different loading conditions.” Granular Matter, 13(6):751–674.10.1007/s10035-011-0284-1 ↗