A Review of the Modeling of High Pressure Grinding Rolls
Source abstract
Abstract
High Pressure Grinding Rolls (HPGR) technology is accepted as an energy-efficient and cost-effective alternative for treating specific mineral ore types. HPGR technology has been advancing within manufacturing facilities and research centers since its first installation in 1985. Over the last three decades much of the literature on HPGR have focused on the industrial applications and trade-off studies in comparison with semi-autogenous and ball milling circuits. Literature on fundamental studies of HPGR technology has been very limited. This paper aims to provide a review of the modeling of high pressure grinding rolls.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mineral Processing and Grinding · Advanced Surface Polishing Techniques · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical Engineering, College of Mines and Earth Sciences, University of Utah, USA
Hearst Memorial Mining Building, University of California, USA
References (65)
Show source-provided references
1. Abouzeid A.-Z.M., Fuerstenau D.W., Grinding of Mineral Mixtures in High-Pressure Grinding Rolls, International Journal of Mineral Processing, 93 (2009) 59–65.10.1016/j.minpro.2009.05.008 ↗
2. Anderson J.S., Napier-Munn, T.J., Power Prediction for Cone Crushers, in: Third Mill Operators Conference, AusIMM, Cobar, 1988.
3. Austin L.G., Shoji K., Bhatia V.K., Savae K., Klimperl R., Some Results on the Description of Size Reduction as a Rate Process in Various Mills, Industrial & Engineering Chemistry Process Design and Development, 15 (1976) 187–196.10.1021/i260057a032 ↗
4. Austin L.G., Van Ordern D.R., Perez J.W., A Preliminary Analysis of Smooth Roll Crushers, International Journal of Mineral Processing, 6 (1980) 321–336.10.1016/0301-7516(80)90028-9 ↗
5. Austin L.G., Weller R., Lim I.L., Phenomenological Modelling of the High Pressure Grinding Rolls, in: XVIII International Mineral Processing Congress, Sydney, 1993, pp. 87–96.
6. Austin L.G., Trubelja M.P., The Capacity and Product Size Distribution of High Pressure Grinding Rolls, in: IV Meeting of the Southern Hemisphere on Mineral Technology, Concepcion, Chile, 1994, pp. 4–67.
7. Austin L.G., Trubeljal M.P., Seebach H.M. Von, Capacity of High-Pressure Grinding Rolls, Minerals and Metallurgical Processing, 1995, pp. 65–73.10.1007/BF03403080 ↗
8. Barrios G.K.P., Pérez-prim J., Tavares L.M., A DEM Model of HPGR Operation Using Bed Compression Models Calibrated with a Piston Die Test, in: 9th International Comminution Symposium, 2014.
9. Battersby M.J.G., Kellerwessel H., Oberheuser G., Important Advances in the Development of High Pressure Rolls Comminution for the Minerals Industry, in: Extractive Metallurgy of Gold and Base Metals, Kalgoorlie, 1992, pp. 26–28.
10. Benzer H., Ergun L., Lynch A.J., Oner M., Gunlu A., Celik I.B., Aydogan N., Modelling Cement Grinding Circuits, Minerals Engineering, 14 (2001) 1469–1482.10.1016/S0892-6875(01)00160-1 ↗
11. Burchardt E., Patzelt N., Knecht J., Klymowsky R., HPGR’s in Minerals: What do Existing Operations Tell us for the Future?, in: Autogenous and Semi-autogenous Grinding Technology Conference, Vancouver, 2011.
12. Daniel M.J., HPGR Model Verification and Scale-up, University of Queensland, 2002.
13. Daniel M.J., Particle Bed Compression Comminution using a Piston-die to Predict the Performance of a HPGR, in: JKMRC Conference, Brisbane, 2003, pp. 67–83.
14. Daniel M.J., Morrell S., HPGR Model Verification and Scale-up, Minerals Engineering, 17 (2004) 1149–1161.10.1016/j.mineng.2004.05.016 ↗
15. De A.K., Modeling and Optimization of Fine Grinding of Minerals in High-Pressure Roll Mill-Ball Mill Hybrid Comminution Circtuis, Univesity of California, Berkeley, 1995.
16. De A., Fuerstenau D.W., Simulation of Macroscopic Variables Related to Comminution in High-Pressure Grinding Rolls, in: XXVI International Mineral Processing Congress (IMPC), New Delhi, 2012, pp. 1075–1090.
17. Dhawan N., Rashidi S., Latchireddi R., Rajamani R.K., Evaluation of Scale up Factors in a Lab Scale High Pressure Grinding Roll, in: XXVI International Mineral Processing Congress (IMPC), New Delhi, 2012, pp. 1171–1188.
18. Djordjevic N., Morrison R., Exploratory Modelling of Grinding Pressure within a Compressed Particle Bed, Minerals Engineering, 19 (2006) 995–1004.10.1016/j.mineng.2006.05.008 ↗
19. Drozdiak J.A., Klein B., Nadolski S., Bamber A., A Pilot-Scale Examination of a High Pressure Grinding Roll/Stirred Mill Comminution Circuit, in: Autogenous and Semi-autogenous Grinding Technology Conference, Vancouver, 2011.
20. Dundar H., Benzer H., Aydogan N., Application of Population Balance Model to HPGR Crushing, Minerals Engineering, 50–51 (2013) 114–120.10.1016/j.mineng.2013.07.005 ↗
21. Esnault V.P.B., Zhou H., Heitzmann D., New Population Balance Model for Predicting Particle Size Evolution in Compression Grinding, Minerals Engineering, 73 (2015) 7–15.10.1016/j.mineng.2014.12.036 ↗
22. Fuerstenau D.W., Shukla A., Kapur P.C., Energy Consumption and Product Size Distributions in Choke-Fed High-Compression Roll Mills, International Journal of Mineral Processing, 32 (1991) 59–79.10.1016/0301-7516(91)90019-F ↗
23. Fuerstenau D.W., Kapur P.C., Gutsche O., Comminution of Minerals in a Laboratory-size, Choke-Fed High-pressure Roll Mill, in: XVIII International Mineral Processing Congress (IMPC), Sydney, 1993, pp. 175–180.
24. Fuerstenau D.W., Kapur P.C., Newer Energy-Efficient Approach to Particle Production by Comminution, Powder Technology, 82 (1995) 51–57.10.1016/0032-5910(94)02891-Q ↗
25. Fuerstenau D.W., Gutsche O., Kapur P.C., Confined Particle Bed Comminution under Compressive Loads, International Journal of Mineral Processing, 44–45 (1996) 521–537.10.1016/0301-7516(95)00063-1 ↗
26. Fuerstenau D.W., Abouzeid A.-Z.M., The Performance of the High Pressure Roll Mill: Effect of Feed Moisture, Fizyko-chemiczne Problemy Mineralurgii, 32 (1998) 227–241.
27. Fuerstenau D.W., Abouzeid A.-Z.M., Role of Feed Moisture in High-Pressure Roll Mill Comminution, International Journal of Mineral Processing, 82 (2007) 203–210.10.1016/j.minpro.2006.11.001 ↗
28. Fuerstenau D.W., Mineral Processing Engineer and Scientist: in Education, Research, Industry, and International Cooperation, in: an Oral History Conducted by Eleanor Swent in 2001, Regional Oral History Office, The Bancroft Library, University of California, Berkeley, 2011, pp. 599–629.
29. Gutsche O., Comminution in Roll Mills, University of California, Berkeley, 1993.
30. Gutsche O., Fuerstenau D.W., Influence of Particle Size and Shape on the Comminution of Single Particles in a Rigidly Mounted Roll Mill, Powder Technology, 143–144 (2004) 186–195.10.1016/j.powtec.2004.04.013 ↗
31. Kalala J.T., Dong H., Hinde A.L., Using Piston-Die Press to Predict the Breakage Behaviour of HPGR, in: Autogenous and Semi-autogenous Grinding Technology Conference, Vancouver, 2011.
32. Klymowsky I.B., Liu J., Modelling of the Comminution in a Roller Press, in: XX International Mineral Processing Congress (IMPC), Aachen, 1997a, pp. 141–154.
33. Klymowsky I.B., Liu J., Towards the Development of a Work Index for the Roller Press, in: Kawatra (Ed.), SME Comminution Practices Symposium, 1997b, pp. 99–105.
34. Klymowsky R., Patzelt N., Knechtz J., Burchardt E., Selection and Sizing of High Pressure Grinding Rolls, in: A.L. Mular, D.N. Halbe, and D.J. Barratt (Eds.), Mineral Processing Plant Design, Practice, and Control Proceedings, 2002, pp. 636–668.
35. Klymowsky R., HPGR-Accepted Technology in Mining, in: Mining Magazine Congress, Niagara-on-the-Lake, Canada, 2009.
36. Lim W.I.L., Morrell S., Tondo L., David D., Modelling the High Pressure Grinding Rolls, in: Mining Technology Conference, Fremantle, (1996a) 169–176.
37. Lim W.I.L., Voigt W., Weller K.R., Product Size Distribution and Energy Expenditure in Grinding Minerals and Ores in High Pressure Rolls, International Journal of Mineral Processing, 95 (1996b) 539–559.10.1016/0301-7516(95)00064-X ↗
38. Lim W.I.L., Weller K.R., Some Benefits of Using Studded Surfaces in High Pressure Grinding Rolls, Minerals Engineering, 12 (1999) 187–203.10.1016/S0892-6875(98)00131-9 ↗
39. Liu J., Schönert K., Modelling of Interparticle Breakage, International Journal of Mineral Processing, 44–45 (1996) 101–115.10.1016/0301-7516(95)00022-4 ↗
40. Lubjuhn U., Schönert K., Material Flow in the Acceleration Zone and Throughput of High Pressure Roller Mills, in: XVIII International Mineral Processing Congress (IMPC), Sydney, 1993, pp. 161–168.
41. Mcken A., Williams S., An Overview of the Small-Scale Tests Available to Characterise Ore Grindability, in: Autogenous and Semi-autogenous Grinding Technology Conference, Vancouver, 2006.
42. Morrell S., Lim W., Shi F., Tondo L., Modelling of the HPGR Crusher, in: Kawatra (Ed.), Comminution Practices, 1997a, pp. 117–126.
43. Morrell S., Shi F., Tondo L., Modelling and Scale-up of High Pressure Grinding Rolls, in: XX International Mineral Processing Congress (IMPC), Aahen, 1997b, pp. 129–140.
44. Morrell S., An Alternative Energy–Size Relationship to that Proposed by Bond for the Design and Optimisation of Grinding Circuits, International Journal of Mineral Processing, 74 (2004) 133–141.10.1016/j.minpro.2003.10.002 ↗
45. Morrell S., Rock Characterisation for High Pressure Grinding Rolls Circuit Desing, in: Autogenous and Semi-autogenous Grinding Technology Conference, Vancouver, 2006.
46. Morrell S., Predicting the Specific Energy Required for Size Reduction of Relatively Coarse Feeds in Conventional Crushers and High Pressure Grinding Rolls, Minerals Engineering, 23 (2010) 151–153.10.1016/j.mineng.2009.10.003 ↗
47. Nadolski S., Bamber A.S., Klein S., Drozdiak J., Investigation into Laboratory Scale Tests for the Sizing of High Pressure Grinding Roll, in: Autogenous and Semi-autogenous Grinding Technology Conference. Vancouver, 2011.
48. Narayanan S., Single Particle Breakage Tests: A Review of Principles and Applications to Comminution Modelling, Bull. Proc. Austalas, Inst. Min. Metall., 291 (1986) 49–58.
49. Norgate T.E., Weller K.R., Options for Incorporating High-Pressure Grinding Rolls into Comminution Circuits, in: Fourth Mill Operators’ Conference, Burnie, 1991, pp. 19–24.
50. Otte O., Polycom High Pressure Grinding Principles and Industrial Application, in: Third Mill Operators’ Conference, Cobar, 1988, pp. 131–135.
51. Patzelt N., High-Pressure Grinding Rolls, A Survey of Experience, in: IEEE Conference, Dallas, 1992, pp. 149–181.10.1109/CITCON.1992.687614 ↗
52. Rashidi S., A Study of Energy-Size Relationship and Wear Rate in a Lab-Scale High Pressure Grinding Rolls Unit, The University of Utah, 2014.
53. Reichardt B.Y., Schönert K., Interparticle Breakage of Fine Hard Materials by Single and Multiple Compression, Chemical Engineering & Technology, 26 (2003) 191–197.10.1002/ceat.200390028 ↗
54. Rosario P.P., Hall R.A., Grundy M., Klein B., A Novel AG-crusher-HPGR Circuit for Hard, Weathered Ores Containing Clays, in: Autogenous and Semi-autogenous Grinding Technology Conference, Vancouver, 2011.
55. Schewechten D., Mulburn G.H., Experiences in Dry Grinding with High Compression Roller Mills for End Product Quality below 20 Microns, Minerals Engineering, 3 (1990) 23–34.10.1016/0892-6875(90)90078-P ↗
56. Schneider C.L., Alves V.K., Austin L.G., Modeling the Contribution of Specific Grinding Pressure for the Calculation of HPGR Product Size Distribution, Minerals Engineering, 22 (2009) 642–649.10.1016/j.mineng.2009.03.006 ↗
57. Schönert K., Sizing of High Pressure Twin Roll Mills, Zement Kalk Gips, 12 (1985) 728–730.
58. Schönert K., A First Survey of Grinding with High-Compression Roller Mills, International Journal of Mineral Processing, 22 (1988) 401–412.10.1016/0301-7516(88)90075-0 ↗
59. Schönert K., Lubjuhn U., Throughput of High Compression Roller Mills with Plane and Corrugated Rollers, in: 7th European Syposium on Comminution, ljubljana, 1990, pp. 149–158.10.14356/kona.1991021 ↗
60. Schönert K., Mueller F., Representation of Breakage Fraction and Breakage Function of Inter-particle Stressing, Aufbereitungs-Tehnik, 31 (1990) 248–256.
61. Schönert K., The Characteristics of Comminution with High Pressure Roller Mills, KONA Powder and Particle Journal, 9 (1991) 149–158.10.14356/kona.1991021 ↗
62. Schönert K., The Influence of Particle Bed Configurations and Confinements on Particle Breakage, International Journal of Mineral Processing, 44–45 (1996) 1–16.10.1016/0301-7516(95)00017-8 ↗
63. Torres M., Casali A., A Novel Approach for the Modelling of High-Pressure Grinding Rolls, Minerals Engineering, 22 (2009) 1137–1146.10.1016/j.mineng.2009.04.011 ↗
64. van der Meer F., High Pressure Grinding Rolls Scale-up and Experiences, in: XXV International Mineral Processing Congress (IMPC), Brisbane, 2010, pp. 1319–1331.
65. van der Meer F.P., Feasibility of Dry High Pressure Grinding and Classification, in: Autogenous and Semi-autogenous Grinding Technology Conference. Vancouver, 2011.