Identification of Optimal Mill Operating Parameters during Grinding of Quartz with the Use of Population Balance Modeling
Source abstract
Abstract
It is known that ball milling is an energy intensive process and great efforts have been made over the years to improve energy efficiency. The use of population balance models (PBMs) can assist in the design of mineral processing circuits and the scale-up of laboratory mill results to full-scale. However, since each model has its own capabilities and limitations, it is believed that a combined use will provide more accurate information for the reliable description of the process. In this study, the simulation of grinding of quartz is investigated in order to identify the optimal mill operating parameters. With the use of population balance modeling the specific rate of breakage and the cumulative breakage parameters can be determined from mono-size, short grinding time batch tests. The determined breakage parameters were back calculated by minimizing the residual error between experimental and reproduced size distributions. By combining two software packages the back calculated breakage parameters were used for the prediction of the optimum ball filling volume. The proposed procedure can be also applied for the identification of optimal mill operating parameters for other minerals.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mineral Processing and Grinding · Minerals Flotation and Separation Techniques · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Technical University of Crete, School of Mineral Resources Engineering, Greece
References (39)
Show source-provided references
1. Austin L.G., Bhatia V.K., Experimental methods for grinding studies in laboratory mills, Powder Technol., 5 (1972) 261–266.10.1016/0032-5910(72)80029-9 ↗
2. Austin L.G., Luckie P.T., Methods for determination of breakage distribution parameters, Powder Technol., 5 (1972) 215–222.10.1016/0032-5910(72)80022-6 ↗
3. Austin L.G., Bagga P., An analysis of fine dry grinding in ball mills, Powder Technol., 28 (1981) 83–90.10.1016/0032-5910(81)87014-3 ↗
4. Austin L.G., Klimpel R.R., Luckie P.T., Process Engineering of Size Reduction: Ball Milling, SME–AIME, New York, 1984.
5. Austin L.G., Julianelli K., Sampaio de Souza A., Schneider C.L., Simulation wet ball milling of iron ore at Carajas, Brazil, Int. J. Miner. Process., 84 (2007) 157–171.10.1016/j.minpro.2006.09.010 ↗
6. Beeck R., Bestimmung der Antriebsleistung von Rohrmühlen auf Grund von Betriebswerten.”, Zement-Kalk-Gips, 23 (1970) 413–416.
7. Bilgili E., Scarlett B., Population balance modeling of non-linear effects in milling processes, Powder Technol., 153 (2005) 59–71.10.1016/j.powtec.2005.02.005 ↗
8. Bond F.C., The third theory of comminution, Trans. AIME, 193 (1952) 484–494.
9. Bond F.C., Crushing and grinding calculations, British Chem. Eng., 6 (1960) 378–391.
10. Bozkurt V., Özgür I., Dry grinding kinetics of colemanite, Powder Technol., 176 (2007) 88–92.10.1016/j.powtec.2007.02.015 ↗
11. Celik M.S., Acceleration of breakage rates of anthracite during grinding in a ball mill, Powder Technol., 54 (1988) 227–233.10.1016/0032-5910(88)80052-4 ↗
12. Charles R.J., Energy–size reduction relationships in comminution, Trans. AIME, 208 (1957) 80–88.
13. Chimwani N., Glasser D., Hildebrandt D., Metzger M.J., Mulenga F.K., Determination of the milling parameters of a platinum group minerals ore to optimize product size distribution for flotation purposes, Miner. Eng., 43–44 (2013) 67–78.10.1016/j.mineng.2012.09.013 ↗
14. Deniz V., Onur T., Investigation of the breakage kinetics of pumice samples as dependent on powder filling in a ball mill, Int. J. Miner. Process., 67 (2002) 71–78.10.1016/S0301-7516(02)00041-8 ↗
15. Deniz V., Comparisons of dry grinding kinetics of lignite, bituminous coal and petroleum coke, Energ. Source, Part A, 35 (2013) 913–920.10.1080/15567036.2010.514591 ↗
16. Fortsch D.S., Ball charge loading—Impact of specific power consumption and capacity, in: Cement Industry Technical Conference, Phoenix, Arizona, USA, Conference Record. IEEE, April 9–14, 2006, pp. 62–72.10.1109/CITCON.2006.1635707 ↗
17. Fuerstenau D.W., Kapur P.C., De A., Modelling Breakage Kinetics in Various Dry Comminution Systems, KONA Powder and Particle Journal, 21 (2003) 121–132.10.14356/kona.2003015 ↗
18. Fuerstenau D.W., De A., Kapur P.C., Linear and nonlinear particle breakage processes in comminution systems, Int. J. Miner. Process., 74S (2004) 317–327.10.1016/j.minpro.2004.07.005 ↗
19. Gupta V.K., Zouit H., Hodouin D., The effect of ball and mill diameters on grinding rate parameters in dry grinding operation, Powder Technol., 42 (1985) 199–208.10.1016/0032-5910(85)80054-1 ↗
20. Gupta V.K. and Sharma S., Analysis of ball mill grinding operation using mill power specific kinetic parameters, Adv. Powder Technol., 25 (2014) 625–634.10.1016/j.apt.2013.10.003 ↗
21. Herbst J.A., Fuerstenau D.W., Mathematical simulation of dry ball milling using specific power information, Trans. AIME, 254 (1973) 343–348.
22. Herbst J.A., Fuerstenau D.W., Scale-up procedure for continuous grinding mill design using population balance models, Int. J. Miner. Process., 7 (1980) 1–31.10.1016/0301-7516(80)90034-4 ↗
23. Ipek H., Göktepe F., Determination of grindability characteristics of zeolite, Physicochem. Probl. Miner. Process., 47 (2011) 183–192.
24. Kick F., Das Gesetz der proportionalen Widerstände und seine Anwendungen, Felix, Leipzig (1885).
25. King R.P., Modeling and simulation of mineral processing systems, Oxford: Butterworth-Heinemann, p. 147, 2001.10.1016/B978-0-08-051184-9.50014-6 ↗
26. Klimpel R.R., Austin L.G., The back-calculation of specific rates of breakage and non-normalized breakage distribution parameters from batch grinding data, Int. J. Miner. Process., 4 (1977) 7–32.10.1016/0301-7516(77)90028-X ↗
27. Metzger M.J., Glasser D., Hausberger B., Hildebrandt D., Glasser B.J., Use of the attainable region analysis to optimize particle breakage in a ball mill, Chem. Eng. Sci., 64 (2009) 3766–3777.10.1016/j.ces.2009.05.012 ↗
28. Nomura S., Hosoda K., Tanaka T., An analysis of the selection function for mills using balls as grinding media, Powder Technol., 68 (1991) 1–12.10.1016/0032-5910(91)80058-Q ↗
29. Nomura S., Tanaka T., Callcott T.G., The effect of mill power on the selection function for tumbling and vibration ball mills, Powder Technol., 81 (1994) 101–109.10.1016/0032-5910(94)02874-5 ↗
30. Ozkan A., Yekeler M., Calkaya M., Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding, Int. J. Miner. Process., 90 (2009) 67–73.10.1016/j.minpro.2008.10.006 ↗
31. Rajamani R.K., Guo D., Acceleration and deceleration of breakage rates in wet ball mills, Int. J. Miner. Process., 34 (1992) 103–118.10.1016/0301-7516(92)90018-R ↗
32. Rittinger P.R., Lehrbuch der Aufbereitungskunde, Ernst and Korn, Berlin (1867).
33. Shoji K., Austin L.G., Smalia F., Brame K., Luckie P.T., Further studies of ball and powder filling effects in ball mills, Powder Technol., 31 (1982) 121–126.10.1016/0032-5910(82)80013-2 ↗
34. Stamboliadis E., A contribution to the relationship of energy and particle size in the comminution of brittle particulate materials, Miner. Eng., 15 (2002) 707–713.10.1016/S0892-6875(02)00185-1 ↗
35. Stamboliadis E., Emmanouilidis S., Petrakis E., A New Approach to the Calculation of Work Index and the Potential Energy of a Particulate Material, Geomater., 1 (2011) 28–32.10.4236/gm.2011.12005 ↗
36. Umucu Y., Deniz V., Bozkurt V., Çağlar M.F., The evaluation of grinding process using artificial neural network, Int. J. Miner. Process., 146 (2016) 46–53.10.1016/j.minpro.2015.11.013 ↗
37. Wang X., Gui W., Yang C., Wang Y., Wet grindability of an industrial ore and its breakage parameters estimation using population balances, Inter. J. Miner. Process., 98 (2011) 113–117.10.1016/j.minpro.2010.11.008 ↗
38. Yahyaei M., Powell M.S., Toor P., Tuxford A., Limpus A., Relining efficiency and liner design for improved plant performance, Miner. Eng., 83 (2015) 64–77.10.1016/j.mineng.2015.08.016 ↗
39. Yekeler M., Ozkan A., Austin L.G., Kinetics of fine wet grinding in a laboratory ball mill, Powder Technol., 114 (2001) 224–228.10.1016/S0032-5910(00)00326-0 ↗