journal article·2015Open access

Effect of Particle Size on Flow Mode and Flow Characteristics of Pulverized Coal

Haifeng Lu, Xiaolei Guo, Yi Liu, Xin Gong

KONA Powder and Particle Journal· Volume 32· Issue 0

Abstract

This paper reports on an extensive experimental campaign aimed at studying on effect of particle size and flow mode on the flow characteristics of pulverized coal. A series of pulverized coal changing the mean particle size in the range 18–224 μm were used as the experimental materials and three flow modes including gravity-induced flow, downwards and upwards mechanically forced flow were investigated. The gravity-induced flow was characterized by discharging pulverized coal from the Perspex hopper gravitationally, while the mechanically forced flow was performed inside a cylindrical vessel where the blade rotated and moved downwards or upwards to displace the pulverized coal. Furthermore, the relationship between different flow modes was discussed and the force analysis was used to reveal the flow mechanisms of gravity-induced flow.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Mineral Processing and Grinding · Cyclone Separators and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Coal Gasification and Energy Chemical Engineering of Ministry of Education, Institute of Clean Coal Technology, East China University of Science and Technology, China

Funding

National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities · China Postdoctoral Science Foundation

References (21)

Show source-provided references
1. Abdullah E.C., Geldart D., The use of bulk density measurements as flowability indicators, Powder Technology, 102 (1999) 151–165.10.1016/S0032-5910(98)00208-3 ↗
2. Beverloo W.A., Leniger H.A., van de Velde J., The flow of granular solids through orifices, Chemical Engineering Science, 15 (1961) 260–269.10.1016/0009-2509(61)85030-6 ↗
3. Bruni G., Barletta D., Poletto M., Lettieri P., A rheological model for the flowability of aerated fine powders, Chemical Engineering Science, 62 (2007) 397–407.10.1016/j.ces.2006.08.060 ↗
4. Cannavacciuolo A., Barletta D., Donsi G., Ferrari G., Poletto M., Arch-Free flow in aerated silo discharge of cohesive powders, Powder Technology, 191 (2009) 272–279.10.1016/j.powtec.2008.10.013 ↗
5. Ferrari G., Bell T.A., Effect of aeration on the discharge behaviour of powders, Powder Handing processing, 10 (1998) 269–274.
6. Fitzpatrick J.J., Iqbal T., Delaney C., Twomey T., Keogh M.K., Effect of powder properties and storage conditions on the flowability of milk powders with different fat contents, Journal of Food Engineering, 64 (2004) 435–444.10.1016/j.jfoodeng.2003.11.011 ↗
7. Forsyth A.J., Hutton S., Rhodes M.J., Effect of cohesive interparticle force on the flow characteristics of granular material, Powder Technology, 126 (2002) 150–154.10.1016/S0032-5910(02)00046-3 ↗
8. Freeman R.E., Measuring the flow properties of consolidated, conditioned and aerated powders – A comparative study using a powder rheometer and a rotational shear cell, Powder Technology, 174 (2007) 25–33.10.1016/j.powtec.2006.10.016 ↗
9. Freeman T., Fu X., Characterisation of powder bulk, dynamic flow and shear properties in relation to die filling. 2008 World Congress On Powder Metallurgy & Particulate Materials, Washington D.C., USA, 2008.10.1179/174329008X324115 ↗
10. Freeman T., Fu X., Schneider L., Measuring powder characteristics relating to forced flow into confined spaces using a universal powder tester, Particulate Systems Analysis conference and exhibition, Stratford on Avon, UK, 2008.
11. Freeman T.C., Freeman R.E., Armstrong B., The characterisation of bulk material properties – the need for a multivariate approach, 3rd International Conference & Exhibition, Bulk Solids Europe, 2010.
12. Hausner H.H., Friction conditions in a mass of metal powder, International Journal of Powder Metallurgy, 3 (1967) 7–13.
13. Klausner J.F., Chen D., Mei R., Experimental investigation of cohesive powder rheology, Powder Technology, 112 (2000) 94–101.10.1016/S0032-5910(99)00310-1 ↗
14. Krantz M., Zhang H., Zhu J., Characterization of powder flow: Static and dynamic testing, Powder Technology, 194 (2009) 239–245.10.1016/j.powtec.2009.05.001 ↗
15. Liang C., Xu P., Chen X., Zhao C., Flow characteristics and stability of dense-phase pneumatic conveying of pulverized coal under high pressure, Experimental Thermal and Fluid Science, 41 (2012) 149–157.10.1016/j.expthermflusci.2012.04.011 ↗
16. Medina A., Andrade J., Cordova J.A., Trevino C., Gravity induced granular flow measurements in a 2D silo with a lateral bottom exit, Physics Letters A, 273 (2000) 109–116.10.1016/S0375-9601(00)00473-4 ↗
17. Peleg M., Flowability of food powders and methods for its evaluation – a review, Food Process Engineering, 1 (1978) 303–328.10.1111/j.1745-4530.1977.tb00188.x ↗
18. Qian G., Bagyi I., Burdick I.W., Pfeffer R., Shaw H., Stevens J.G., Gas–Solid Fluidization in a Centrifugal Field, AIChE Journal, 47 (2001) 1022–1034.10.1002/aic.690470509 ↗
19. Shu X., Wu Y., Tao Q., Cheng J., Xia Y., An analysis on report of Mastersizer 2000 laser particle size analyzer, Experimental Technology and Management, 28 (2011) 37–41.
20. Spink C.D., Nedderman R.M., Gravity discharge rate of fine particles from hoppers, Powder Technology, 21 (1978) 245– 261.10.1016/0032-5910(78)80093-X ↗
21. Wolf D.A., Schwarz R.P., Analysis of gravity-induced particle motion and fluid perfusion flow in the NASA-designed rotating zero-head-space tissue culture vessel, 1991, NASA Technical Paper 3143.