Surface Chemistry and Rheology of Slurries of Kaolinite and Montmorillonite from Different Sources
Source abstract
Abstract
Zeta potential (ζ)-pH and yield stress (τy)-pH behaviour of a number of kaolinite and montmorillonite slurries, including CMS-sourced materials, were compared. The CMS KGa-2 and Crown kaolin with very similar elemental composition displayed almost identical ζ-pH and τy-pH behaviour. Both displayed a pHζ=0 at 3–4 where the maximum τy was located. This pHζ=0 was higher at higher ionic strength as the pH-dependent charge increased with ionic strength and the permanent structural charge being invariant. The other kaolinite slurries (Reidel and Unimin) with different composition showed different behaviour. The surface chemistry and rheological properties of CMS-sourced SWy-2 (Na-) and STx-1b (Ca-) montmorillonite and bentonite slurries were also compared. They all displayed a negative zeta potential that was insensitive to pH. STx-1b slurries required a much higher solid concentration to form a gel. Maximum τy occurred over a broad range of pH. This pH is ∼5 for SWy-2, 8 for STx-1b, <2 for bentonite and 12 for API bentonite. Their difference in clay mineral composition such as impurities and exchangeable cations were highlighted. The point of zero charge (pzc) of kaolinite and montmorillonite slurries obtained via Mular-Roberts pH-salt addition method did not correlate well with the pHζ=0 except for the KGa-2 and Crown kaolin.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Soil and Unsaturated Flow · Clay minerals and soil interactions · Mine drainage and remediation techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Chemical Engineering, The University of Western Australian, Australia
References (81)
Show source-provided references
1. Abend S., Lagaly G., Sol–gel transitions of sodium montmorillonite dispersions, Applied Clay Science, 16 (2000) 201–227.10.1016/S0169-1317(99)00040-X ↗
2. Abu-Jdayil B., Rheology of sodium and calcium bentonite–water dispersions: Effect of electrolytes and aging time, Int. J. Miner. Process., 98 (2011) 208–213.10.1016/j.minpro.2011.01.001 ↗
3. Alvarez-Silva M., Uribe-Salas A., Mirnezami M., Finch J.A., The point of zero charge of phyllosilicate minerals using the Mular–Roberts titration technique, Minerals Engineering, 23 (2010) 383–389.10.1016/j.mineng.2009.11.013 ↗
4. Appel C., Ma L.Q., Dean Rhue R., Kennelley E., Point of zero charge determination in soils and minerals via traditional methods and detection of electroacoustic mobility, Geoderma, 113 (2003) 77–93.10.1016/S0016-7061(02)00316-6 ↗
5. Atesok G., Somasundaran P., Morgan L.J., Adsorption properties of Ca2+ on Na-kaolinite and its effect on flocculation using polyacrylamides, Colloids and Surfaces, 32 (1988) 127–138.10.1016/0166-6622(88)80009-X ↗
6. Au P.I., Leong Y.K., Rheological and zeta potential behaviour of kaolin and bentonite composite slurries: Colloids Surfaces A: Physicochem. Eng. Aspects 436 (2013) 530–541.10.1016/j.colsurfa.2013.06.039 ↗
7. Au P.I., Siow S.Y., Avadiar L., Lee E.M., Leong Y.K., Muscovite mica and koalin slurries: Yield stress–volume fraction and deflocculation point zeta potential comparison, Powder Technology, 262 (2014) 124–130.10.1016/j.powtec.2014.04.078 ↗
8. Au P.I., Leong Y.K., Surface chemistry and rheology of laponite dispersions-zeta potential, yield stress, ageing, fractal dimension and pyrophosphate, Applied Clay Science, 107 (2015) 36–45.10.1016/j.clay.2015.01.033 ↗
9. Avadiar L., Leong Y.K., Fourie A., Nugraha T., Rheological Response to Ca(II) Concentration—The Source of Kaolin Slurry Rheological Variation, Chemeca 2012: The 42th Australasian Chemical Engineering Conference, Engineer Australia, (2012) 243.pdf.
10. Avadiar L., Leong Y.K., Fourie A., Nugraha T., Clode P.L., Source of Unimin kaolin rheological variation–Ca2+ concentration, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 459 (2014) 90–99.10.1016/j.colsurfa.2014.06.048 ↗
11. Avadiar L., Leong Y.K., Fourie A., Physicochemical behaviors of kaolin slurries with and without cations—Contributions of alumina and silica sheets, Colloids and Surfaces A: Physicochemical and Engineering Aspects 468 (2015) 103–113.10.1016/j.colsurfa.2014.12.019 ↗
12. Aznar A.J., Casal B., Ruiz-Hitzky E., Lopez-Arbeloa I., Lopez-Arbeloa F., Santaren J., Alvarez A., Adsorption of methylene blue on sepiolite gels: spectroscopic and rheological studies, Clay Minerals, 27 (1992) 101–108.10.1180/claymin.1992.027.1.10 ↗
13. Bolland M.D.A., Posner A.M., Quirk J.P., pH-Independent and pH-dependent surface charges on kaolinite, Clays and Clay minerals, 28 (1980) 412–418.10.1346/CCMN.1980.0280602 ↗
14. Brandenburg U., Lagaly G., Rheological properties of sodium montmorillonite dispersions, Applied Clay Science, 3 (1988) 263–279.10.1016/0169-1317(88)90033-6 ↗
15. Zbik M.S., Smart R.S.C., Morris G.E., Kaolinite flocculation structure, Journal Colloid Interface Science, 328 (2008) 73–80.10.1016/j.jcis.2008.08.063 ↗
16. Callaghan I.C., Ottewill R.H., Interparticle forces in montmorillonite gels, Faraday Discussion, 57 (1974) 110–118.10.1039/dc9745700110 ↗
17. Chang W.Z., Leong Y.K., Ageing and collapse of bentonite gels—effects of Li, Na, K and Cs ions, Rheological Acta, 53 (2014) 109–122.10.1007/s00397-013-0744-0 ↗
18. Chipera S.J., Bish D.L., Baseline studies of the clay minerals society source clays: powder X-ray diffraction analyses. Clays and Clay Minerals, 49 (2001) 398–409.10.1346/CCMN.2001.0490507 ↗
19. CMS (Clay Mineral Society USA), 2015, SC Data accessed 1.04.2015.
20. Dolz M., Jiménez J., Hernández M.J., Delegido J., Casanovas A., Flow and thixotropy of non-contaminating oil drilling fluids formulated with bent and sodium carboxymethyl cellulose, Journal of Petroleum Science and Engineering, 57 (2007) 294–302.10.1016/j.petrol.2006.10.008 ↗
21. Du J., Morris G., Pushkarova R.A., Smart R. St. C., Effect of Surface Structure of Kaolinite on Aggregation, Settling Rate, and Bed Density, Langmuir, 26 (2010) 13227–13235.10.1021/la100088n ↗
22. Duc M., Gaboriaud F., Thomas F., Sensitivity of the acid–base properties of clays to the methods of preparation and measurement: 1. Literature review, Journal of Colloid and Interface Science, 289 (2005) 139–147.10.1016/j.jcis.2005.03.060 ↗
23. Durán J.D.G., Ramos-Tejada M.M., Arroyo F.J., González-Caballero F., Rheological and electrokinetic properties of sodium montmorillonite suspensions: I. rheological properties and interparticle energy of interaction, Journal of Colloid and Interface Science, 229 (2000) 107–117.10.1006/jcis.2000.6956 ↗
24. Galan E., Properties and application of palygorskite-sepiolite clays, Clay Minerals, 31 (1996) 443–453.10.1180/claymin.1996.031.4.01 ↗
25. Galindo-Rosales F.J., Rubio-Hernández F.J., Structural breakdown and build-up in bentonite dispersions, Applied Clay Science, 33 (2006) 109–115.10.1016/j.clay.2006.03.011 ↗
26. Goh R., Leong Y.K., Lehane B., Bentonite slurries—zeta potential, yield stress, adsorbed additive and time-dependent behaviour, Rheologica Acta, 50 (2011) 29–38.10.1007/s00397-010-0498-x ↗
27. Gupta V., Hampton M.A., Stokes J.R., Nguyen A.V., Miller J.D., Particle interactions in kaolinite suspensions and corresponding aggregate structures, Journal Colloid Interface Science, 359 (2011) 95–103.10.1016/j.jcis.2011.03.043 ↗
28. Heath D., Tadros T.F., Influence of pH, electrolyte, and poly (vinyl alcohol) addition on the rheological characteristics of aqueous dispersions of sodium montmorillonite, Journal of Colloid and Interface Science, 93 (1983) 307–319.10.1016/0021-9797(83)90415-0 ↗
29. Heidmann I., Christl I., Leu C., Kretzschmar R., Competitive sorption of protons and metal cations onto kaolinite: experiments and modeling, Journal Colloid and Interface Science, 282 (2005) 270–282.10.1016/j.jcis.2004.08.019 ↗
30. Humphries S.D., Vaniman D.T., Sharma S.K., Bates D.E., Misra A.K., Wiens R.C., McInroy R.E., Clegg S.M., Investigation of Mars clay analogs by remote Laser Induced Breakdown Spectroscopy (LIBS), 42nd Lunar and Planetary Science Conference (2011) 1851.pdf
31. Hunter R.J. Introduction to Modern Colloid Science, OUP, Oxford, p. 226 (2003).
32. Hunter R.J., Nicol S.K., The dependence of plastic flow behaviour of clay suspensions on surface properties: J. Colloid Interface Sci. 28 (1968) 250–259.10.1016/0021-9797(68)90127-6 ↗
33. Kelessidis V.C. and Maglione R., Yield stress of water–bentonite dispersions, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 318 (2008) 217–226.10.1016/j.colsurfa.2007.12.050 ↗
34. Kosmulski M., The pH-dependent surface charging and points of zero charge: V. Update, Journal of Colloid and Interface Science, 353 (2011) 1–15.10.1016/j.jcis.2010.08.023 ↗
35. Kranenburg C., On the fractal structure of cohesive sediment aggregates, Estuarine Coast Shelf Science, 39 (1994) 451–460.10.1006/ecss.1994.1075 ↗
36. Lagaly G., Principles of flow of kaolin and bentonite dispersions, Applied Clay Science, 4 (1989) 105–123.10.1016/0169-1317(89)90003-3 ↗
37. Lagaly G., Colloid clay science, in: Bergaya F., Theng B.K.G., Lagaly G. (Eds.), Handbook of Clay Science, Elsevier, Amsterdam, 2006, pp.141–142.10.1016/S1572-4352(05)01005-6 ↗
38. Laxton P.B., Berg J.C., Relating clay yield stress to colloidal parameters, Journal of Colloid and Interface Science, 296 (2006) 749–755.10.1016/j.jcis.2005.09.061 ↗
39. Lee C.E., Chandra S., Leong Y.K., Structural recovery behaviour of kaolin, bentonite and K-montmorillonite slurries, Powder Technology, 223 (2012) 105–109.10.1016/j.powtec.2011.07.001 ↗
40. Leong Y.K., Ong B.C., Critical zeta potential and the Hamaker constant of oxides in water, Powder Technology, 134 (2003) 249–25410.1016/j.powtec.2003.08.054 ↗
41. Leong Y.K., Scales P.J., Healy T.W., Boger D.V., Effect of Particle Size on Colloidal Zirconia Rheology at the Isoelectric Point, Journal of the American Ceramic Society, 78 (1995) 2209–2212.10.1111/j.1151-2916.1995.tb08638.x ↗
42. Leong Y.K., Teo J., Teh E.J., Smith J., Widjaja J., Lee J.X., Fourie A., Fahey M., Chen R., Controlling attractive interparticle forces via small anionic and cationic additives in kaolin clay slurries, Chemical Engineering Research and Design, 90 (2012) 658–666.10.1016/j.cherd.2011.09.002 ↗
43. Liang H.N., Long Z., Zhang H., Yang S.H., Rheological properties of acid-activated bentonite dispersions. Clays and Clay Minerals, 58 (2010) 311–317.10.1346/CCMN.2010.0580302 ↗
44. Lockhart N.C., Electrical properties and the surface characteristics and structure of clays I. swelling clays, Journal Colloid Interface Science, 74 (1980) 509–519.10.1016/0021-9797(80)90220-9 ↗
45. Luckham P.F., Rossi S., The colloidal and rheological properties of bentonite dispersions. Advanced Colloid Interface Science, 82 (1999) 43–92.10.1016/S0001-8686(99)00005-6 ↗
46. McFarlane A.J., Addai-Mensah J., Bremmell K.E., Improved dewatering behaviour of clay minerals dispersions via interfacial chemistry and particle interactions optimization. J. Colloid Interface Sci., 293 (2006) 116–127.10.1016/j.jcis.2005.06.034 ↗
47. Melton I.E., Rand B., Particle interactions in aqueous kaolin suspensions II. Comparison of some laboratory and commercial kaolin samples, Journal Colloid Interface Science, 60 (1977) 321–330.10.1016/0021-9797(77)90291-0 ↗
48. Mular A.L., Roberts R.B., A simplified method to determine isoelectric points of oxides Transactions of the Canadian Institute of Mining and Metallurgy, 69 (1966) 438–439.
49. Ndlovu B., Forbes E., Farrokhpay S., Becker M., Bradshaw D., Deglon D., A preliminary rheological classification of phyllosilicate group minerals, Minerals Engineering, 55 (2014) 190–200.10.1016/j.mineng.2013.06.004 ↗
50. Nguyen Q.D., Boger D.V., Yield stress measurement for concentrated suspensions, Journal of Rheology 27 (1983) 321–349.10.1122/1.549709 ↗
51. Norrish K., The swelling of montmorillonite, Discussion Faraday Society, 18 (1954) 120–134.10.1039/df9541800120 ↗
52. Packter A., Studies in the rheology of clay-water systems, Kolloid-Z, 149 (1956) 109–115.10.1007/BF01511476 ↗
53. Paineau E., Michot L.J., Bihannic I., Baravian C., Aqueous suspensions of natural swelling clay minerals. 2. rheological characterization, Langmuir, 27 (2011) 7806–7819.10.1021/la2001267 ↗
54. Permien T., Lagaly G., The rheological and colloidal properties of bentonite dispersions in the presence of organic compounds IV. sodium montmorillonite and acids, Applied Clay Science 9 (1994) 251–263.10.1016/0169-1317(94)90003-5 ↗
55. Pradip, Li C.C.H., Fuerstenau D.W., Surface chemical characterization of bastnaesite through electrokinetics, KONA Powder and Particle Journal, 32 (2015) 176–183.10.14356/kona.2015007 ↗
56. Ramos-Tejada M.M., Arroyo F.J., Perea R., Duran J.D., Scaling behavior of the rheological properties of montmorillonite dispersions: correlation between interparticle interaction and degree of flocculation, Journal Colloid Interface Science, 235 (2001) 251–259.10.1006/jcis.2000.7370 ↗
57. Rand B., Melton I.E., Particle interactions in aqueous kaolinite suspensions: I. Effect of pH and electrolyte upon the mode of particle interaction in homoionic sodium kaolinite suspensions, Journal of Colloid Interface Science, 60 (1977) 308–320.10.1016/0021-9797(77)90290-9 ↗
58. Reymond J.P., Kolenda F., Estimation of the point of zero charge of simple and mixed oxides by mass titration, Powder Technology, 103 (1999) 30–36.10.1016/S0032-5910(99)00011-X ↗
59. Sakairi N., Kobayashi M., Adachi Y., Effects of salt concentration on the yield stress of sodium montmorillonite suspension, Journal Colloid Interface Science, 283 (2005) 245–250.10.1016/j.jcis.2004.08.181 ↗
60. Scales P.J., Johnson S.B., Healy T.W., Kapur P.C., Shear yield stress of partially flocculated colloidal suspensions, American Institute Chemical Engineering Journal, 44 (1998) 538–544.10.1002/aic.690440305 ↗
61. Schroth B.K., Sposito G., Surface charge properties of kaolinite, Clays and Clay minerals, 45 (1997) 85–91.10.1346/CCMN.1997.0450110 ↗
62. Sehly K., Chiew H.L., Li H., Song A., Leong Y.K., Huang W., Stability and ageing behaviour and the formulation of potassium-based drilling muds, Applied Clay Science, 104 (2015) 309–317.10.1016/j.clay.2014.12.013 ↗
63. Shankar P., Teo J., Leong Y.K., Fourie A., Fahey M., Adsorbed phosphate additives for interrogating the nature of interparticle forces in kaolin clay slurries via rheological yield stress, Advanced Powder Technology, 21 (2010) 380–385.10.1016/j.apt.2010.02.013 ↗
64. Stawinski J., Wierzchos J., Garcia-Gonzalez M.T., Influence of calcium and sodium concentration on the microstructure of bentonite and kaolin, Clays and Clay Minerals, 38 (1990) 617–622.10.1346/CCMN.1990.0380607 ↗
65. Teh E.J., Leong Y.K., Liu Y., Fourie A,B., Fahey M., Differences in the rheology and surface chemistry of kaolin clay slurries: the source of the variations, Chemical Engineering Science, 64 (2009) 3817–3825.10.1016/j.ces.2009.05.015 ↗
66. Teh E.J., Leong Y.K., Liu Y., Ong B.C., Berndt C.C., Chen S.B., Yield stress and zeta potential of washed and highly spherical oxide dispersions—critical zeta potential and Hamaker constant, Powder Technology, 198 (2010) 114–119.10.1016/j.powtec.2009.10.023 ↗
67. Tombácz E., Szekeres M., Colloidal behavior of aqueous montmorillonite suspensions: the specific role of pH in the presence of indifferent electrolytes, Applied Clay Science, 27 (2004) 75–94.10.1016/j.clay.2004.01.001 ↗
68. Tombácz E., Szekeres M., Surface charge heterogeneity of kaolinite in aqueous suspension in comparison with montmorillonite, Applied Clay Science, 34 (2006) 105–124.10.1016/j.clay.2006.05.009 ↗
69. van Olphen H., Rheological phenomena of clay sols in connection with charge distribution on the micelles, Discussion Faraday Society, 11 (1951) 82–84.10.1039/df9511100082 ↗
70. van Olphen H., Forces between suspended bentonite particles. Clays and Clay Minerals, 4 (1955) 204–224.10.1346/CCMN.1955.0040128 ↗
71. van Olphen H., Forces between suspended bentonite particles part II—calcium bentonite. Clays and Clay Minerals, 6 (1957) 196–206.10.1346/CCMN.1957.0060115 ↗
72. van Olphen H., An Introduction to Clay Colloid Chemistry, Wiley, New York, 1977.10.1097/00010694-197807000-00013 ↗
73. Wessel R., Ball R.C., Fractal aggregates and gels in shear flow, Physical Review A, 46 (1992) R3008–R3011.10.1103/PhysRevA.46.R3008 ↗
74. Yap J., Leong Y.K., Liu J., Structural recovery behavior of barite-loaded bentonite drilling muds, Journal Petroleum Science and Engineering, 78 (2011) 552–558.10.1016/j.petrol.2011.06.010 ↗
75. Yildiz N., Sarikaya Y., Çalimli A., The effect of the electrolyte concentration and pH on the rheological properties of the original and the Na2CO3-activated Kütahya bentonite, Applied Clay Science, 14 (1999) 319–327.10.1016/S0169-1317(99)00006-X ↗
76. Yoon J., El Mohtar C., Dynamic rheological properties of sodium pyrophosphate modified bentonite dispersions for liquefaction mitigation, Clays and Clay Minerals 61 (2013) 319–327.10.1346/CCMN.2013.0610411 ↗
77. Yoon J., El Mohtar C., Constitutive model parameters of concentrated bentonite suspensions modified with sodium pyrophosphate, Journal of Material Science, (2015) DOI 10.1007/s10853-015-9073-2.10.1007/s10853-015-9073-2 ↗
78. Żbik M.S., Smart R.S.C., Nanomorphology of kaolinites: comparative SEM and AFM studies, Clays and Clay minerals, 46 (1998) 153–160.10.1346/CCMN.1998.0460205 ↗
79. Żbik M.S., Smart R. St.C., Morris G.E., Kaolinite flocculation structure, Journal of Colloid Interface Science, 328 (2008) 73–80.10.1016/j.jcis.2008.08.063 ↗
80. Żbik M.S., Raftery N.A., Smart R.S.C., Frost R.L., Kaolinite platelet orientation for XRD and AFM applications, Applied Clay Science, 50 (2010) 299–304.10.1016/j.clay.2010.08.010 ↗
81. Zhou Z., Gunter W.D., The nature of the surface charge of kaolinite, Clays and Clay minerals, 40 (1992) 365–368.10.1346/CCMN.1992.0400320 ↗