Fabrication and Electrochemical Characteristics of LiFePO4 Powders for Lithium-Ion Batteries
Source abstract
Abstract
Novel powder fabrication technologies provide opportunities to develop high-performance, low-cost cathode materials for rechargeable lithium-ion batteries. Among various energy storage technologies, rechargeable lithium-ion batteries have been considered as effective solution to the increasing need for high-energy density electrochemical power sources. Rechargeable lithium-ion batteries offer energy densities 2–3 times and power densities 5–6 times higher than conventional Ni-Cd and Ni-MH batteries, and as a result, they weigh less and take less space for a given energy delivery. However, the use of lithium-ion batteries in many large applications such as electric vehicles and storage devices for future power grids is hindered by the poor thermal stability, relatively high toxicity, and high cost of lithium cobalt oxide (LiCoO2) powders, which are currently used as the cathode material in commercial lithium-ion batteries. Recently, lithium iron phosphate (LiFePO4) powders have become a favorable cathode material for lithium-ion batteries because of their low cost, high discharge potential (around 3.4 V versus Li/Li+), large specific capacity (170 mAh/g), good thermal stability, and high abundance with the environmentally benign and safe nature. As a result, there is a huge demand for the production of high-performance LiFePO4 powders. However, LiFePO4 also has its own limitation such as low conductivity (∼10−9 S/cm), which results in poor rate capability. This can be addressed by modifying the powder structure using novel fabrication technologies. This paper presents an overview of recent advances in the fabrication of high-performance LiFePO4 powders for lithium-ion batteries. The LiFePO4 powder fabrication methods covered include: solid-state synthesis, mechanochemical activation, carbothermal reduction, microwave heating, hydrothermal synthesis, sol-gel synthesis, spray pyrolysis, co-precipitation, microemulsion drying, and others. The impacts of these fabrication methods on the structure and performance of LiFePO4 powders are discussed. In addition, the improvement of the conductivity of LiFePO4 powders through novel powder technologies is addressed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Fiber and Polymer Science Program, Department of Textile Engineering, Chemistry and Science, North Carolina State University
References (100+)
Show source-provided references
1. 1) Balbuena, P. B. and Wang, Y., (2004): “Lithium-Ion Batteries: Solid-Electrolyte Interphase”, Imperial College Press, London, U.K.10.1142/9781860946448 ↗
2. 2) Vincent, C. A., (2000): Lithium batteries: A 50-year perspective, Solid State Ionics, vol.134 (1–2), 1959–2009, pp.314–331.10.1016/S0167-2738(00)00723-2 ↗
3. 3) Cheruvally, G., (2008): “Lithium Iron Phosphate: A Promising Cathode-Active Material for Lithium Secondary Batteries”, Trans Tech Publications Ltd, Stafa-Zuerich, Switzerland.
4. 4) Shukla, A. K. and Prem Kumar, T., (2008): Materials for next-generation lithium batteries, Current Science, vol.94 (3), pp.314–331.
5. 5) Padhi, A. K., Nanjundaswamy, K. S. and Goodenough, J. B., (1997): Phospho-olivines as Positive-Electrode Materials for Rechargeable Lithium Batteries, Journal of Electrochemical Society, vol.144, pp.1188–1194.10.1149/1.1837571 ↗
6. 6) Chung, S. Y., Bloking, J. T. and Chiang, Y. M., (2002): Electronically conductive phospho-olivines as lithium storage electrodes, Nature Materials, vol.1, pp.123–128.10.1038/nmat732 ↗
7. 7) Yang, S., Song, Y., Ngala, K., Zavalij, P. Y. and Whittingham, M. S., (2003): Performance of LiFePO4 as lithium battery cathode and comparison with manganese and vanadium oxides, Journal of Power Sources, vol.119–121, pp.239–246.10.1016/S0378-7753(03)00240-4 ↗
8. 8) Ravet, N. C. Y., Magnan, J. F., Besner, S., Gauthier, M. and Armand, M., (2001): Electroactivity of natural and synthetic triphylite, Journal of Power Sources, vol.97(8), pp.503–507.10.1016/S0378-7753(01)00727-3 ↗
9. 9) Herle, P. S., Ellis, B., Coombs, N. and Nazar, L. F., (2004): Nano-network electronic conduction in iron and nickel olivine phosphates, Nature Materials, vol.3, pp.7–152.10.1038/nmat1047 ↗
10. 10) Delacourt, C., Poizot, P., Levasseur, S. and Masquelier, C., (2006): Size effects on carbon-free LiFePO4 powders, Electrochemical and Solid State Letters, vol.9, pp.A352–A355.10.1149/1.2201987 ↗
11. 11) Kim, D. H. and Kim, J. (2006): Synthesis of LiFePO4 nanoparticles in polyol medium and their electro-chemical properties, Electrochemical and Solid State Letters,vol.9, pp.A439–A442.10.1149/1.2218308 ↗
12. 12) Andersson, A.S. and Thomas, J.O., (2001): The source of first-cycle capacity loss in LiFePO4, Journal of Power Sources, vol.97–98, pp.498–502.10.1016/S0378-7753(01)00633-4 ↗
13. 13) Wang, G. X., Bewlay, S., Needham, S. A., Liu, H. K., Liu, R. S., Drozd, V. A., Lee, J.-F. and Chen, J. M., (2006): Synthesis and Characterization of LiFePO4 and LiTi0.01Fe0.99PO4Cathode Materials, Journal of The Electrochemical Society, vol.153(1), pp.A25–A31.10.1149/1.2128766 ↗
14. 14) Ruffo, R., Huggins, R.A., Mari, C.M., Piana, M. and Weppner, W., (2005): Phosphate Materials for Cathodes in Lithium Ion Secondary Batteries, Ionics, vol.11, pp.213–219.10.1007/BF02430379 ↗
15. 15) Yao, J., Konstantinov, K., Wang, G. X. and Liu, H. K., (2007): Electrochemical and magnetic characterization of LiFePO4 and Li0.95Mg0.05FePO4 cathode materials, Journal of Solid State Electrochemistry, vol.11, pp.177–185.
16. 16) Yamada, A., Chung, S.C. and Hinokuma, K., (2001): Optimized LiFePO4 for lithium battery cathodes, Journal of The Electrochemical Society, vol.148, pp.A224–A229.10.1149/1.1348257 ↗
17. 17) Koltypin, M., Aurbach, D., Nazar, L. and Ellis, B., (2007): More on the performance of LiFePO4 electrodes — The effect of synthesis route, solution composition, aging, and temperature, Journal of Power Sources, vol.174, pp.1241–1250.10.1016/j.jpowsour.2007.06.045 ↗
18. 18) Yun, N.J., Ha, H.-W., Jeong, K.H., Park, H.-Y. and Kim, K., (2006): Synthesis and electrochemical properties of olivine-type LiFePO4/C composite cathode material prepared from a poly(vinyl alcohol)-containing precursor, Journal of Power Sources vol.160, pp.1361–1368.10.1016/j.jpowsour.2006.02.097 ↗
19. 19) Fey, G.T.K. and Lu, T.L., (2008): Morphological characterization of LiFePO4/C composite cathode materials synthesized via a carboxylic acid route, Journal of Power Sources, vol.178, pp.807–814.10.1016/j.jpowsour.2007.09.039 ↗
20. 20) Zaghib, K., Ravet, N., Gauthier, M., Gendron, F., Mauger, A., Goodenough, J.B. and Julien, C.M., (2006): Optimized electrochemical performance of LiFePO4 at 60°C with purity controlled by SQUID magnetometry, Journal of Power Sources, vol.163, pp. 560–566.10.1016/j.jpowsour.2006.09.030 ↗
21. 21) Wang, D., Li, H., Wang, Z., Wu, X., Sun, Y., Huang, X. and Chen, L.,(2004): New solid-state synthesis routine and mechanism for LiFePO4 using LiF as lithium precursor, Journal of Solid State Chemistry, vol.177, pp.4582–4587.10.1016/j.jssc.2004.09.013 ↗
22. 22) Fey, G.T.K., Chen, Y.G. and Kao, H.M., (2009): Electrochemical properties of LiFePO4 prepared via ball-milling, Journal of Power Sources, vol.189, pp.169–178.10.1016/j.jpowsour.2008.10.016 ↗
23. 23) Franger, S., Le Cras, F., Bourbon, C. and Rouault, H., (2003): Comparison between different LiFePO4 synthesis routes and their influence on its physico-chemical properties, Journal of Power Sources vol.119–121, pp.252–257.10.1016/S0378-7753(03)00242-8 ↗
24. 24) Wang, D., Wu, X., Wang, Yh. and Chen, L., (2005): Cracking causing cyclic instability of LiFePO4 cathode material, Journal of Power Sources vol.140, pp.125–128.10.1016/j.jpowsour.2004.06.059 ↗
25. 25) Li, M., Xie, K., Li, D. and Pan, Y., (2005): Synthesis of LiFePO4 by one-step annealing under the vacuum condition, Journal of Materials Science, vol.40, pp.2639–2641.10.1007/s10853-005-2094-5 ↗
26. 26) Yamada, A., Hosoya, M., Chung, S.Ch., Kudo, Y., Hinokuma, K., Liu, K.-Y. and Nishi, Y., (2003): Olivine-type cathodes: Achievements and problems, Journal of Power Sources, vol.119–121, pp.232–238.10.1016/S0378-7753(03)00239-8 ↗
27. 27) Ojczyk, W., Marzec, J., Swierczek, K., Zajac, W., Molenda, M., Dziembaj, R. and Molenda, J., (2007): Studies of selected synthesis procedures of the conducting LiFePO4-based composite cathode materials for Li-ion batteries, Journal of Power Sources, vol.173, pp.700–706.10.1016/j.jpowsour.2007.05.055 ↗
28. 28) Zhou, F., Kang, K., Maxisch, T., Ceder, G. and Morgan, D., (2004): The electronic structure and band gap of LiFePO4 and LiMnPO4, Solid State Communications, vol.132, pp.181–186.10.1016/j.ssc.2004.07.055 ↗
29. 29) Hong, K.S., Yu, S. M., Ha, M. G., Ahn, C. W., Hong, T. E., Jin, J. S., Kim, H. G., Jeong, E. D., Kim, Y.S., Kim, H.J., Doh, C.H., Yang, H.S. and Jung, H., (2009): Preparation of LiFePO4 Using Chitosan and its Cathodic Properties, Bulletin of the Korean Chemical Society, vol.30(8), pp.1719–1723.10.5012/bkcs.2009.30.8.1719 ↗
30. 30) Lai, C., Xu, Q., Ge, H., Zhou, G. and Xie, J., (2008): Improved electrochemical performance of LiFePO4/C for lithium-ion batteries with two kinds of carbon sources, Solid State Ionics, vol.179, pp.1736–1739.10.1016/j.ssi.2008.03.042 ↗
31. 31) Mi, C.H., Zhang, X.G. and Li, H.L., (2007): Electrochemical behavior s of solid LiFePO4 and Li0.99Nb0.01FePO4 in Li2SO4 aqueous electrolyte, Journal of Electroanalytical Chemistry, vol.602, pp.245–254.
32. 32) Jugović, D., Cvjetićanin, N., Mitrić, M., Mentus, S. and Uskokovic, D., (2007): Comparison between different LiFePO4 synthesis routes, Materials Science Forum, vol.555, pp.225–230.10.4028/www.scientific.net/MSF.555.225 ↗
33. 33) Takahashi, M., Tobishima, Sh., Takei, K. and Sakurai, Y., (2001): Characterization of LiFePO4 as the cathode material for rechargeable lithium batteries, Journal of Power Sources vol.97–98, pp.508–511.10.1016/S0378-7753(01)00728-5 ↗
34. 34) Rahaman, M. N., (2003): “Ceramic processing and sintering”, 2nd ed., Marcel Dekker, Inc., New York, U.S.A.
35. 35) Morales, J., Trócoli, R., Castellon, E. R., Franger, S. and Pena, J. S., (2009): Effect of C and Au additives produced by simple coaters on the surface and the electrochemical properties of nanosized LiFePO4, Journal of Electroanalytical Chemistry, vol.631, pp.29–35.10.1016/j.jelechem.2009.03.006 ↗
36. 36) Kim, H. S., Cho, B. W. and Cho, W. I., (2004): Cycling performance of LiFePO4 cathode material for lithium secondary batteries, Journal of Power Sources, vol.132, pp.235–239.10.1016/j.jpowsour.2003.12.058 ↗
37. 37) Shin, H. Ch., Cho, W. I., and Jang, H., (2006): Electro-chemical properties of carbon-coated LiFePO4 cathode using graphite, carbon black, and acetylene black, Electrochimica Acta, vol.52, pp.1472–1476.10.1016/j.electacta.2006.01.078 ↗
38. 38) Kim, J. K., Cheruvally, G., Ahn, J. H., Hwang, G. Ch., and Choi, J. B., (2008): Electrochemical properties of carbon-coated LiFePO4 synthesized by a modified mechanical activation process, Journal of Physics and Chemistry of Solids, vol.69, pp.2371–2377.10.1016/j.jpcs.2008.03.018 ↗
39. 39) Kim, Ch. W., Park, J. S. and Lee, K. S., (2006): Effect of Fe2P on the electron conductivity and electrochemical performance of LiFePO4 synthesized by mechanical alloying using Fe3+ raw material, Journal of Power Sources, vol.163, pp.144–150.10.1016/j.jpowsour.2006.02.071 ↗
40. 40) Porcher, W., Lestriez, B., Jouanneau, S. and Guyomard, D., (2010): Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes, Journal of Power Sources, Article in Press, doi:10.1016/j.jpowsour.2009.11.088.10.1016/j.jpowsour.2009.11.088 ↗
41. 41) Franger, S., Benoit, C., Bourbon, C. and Le Cras, F., (2006): Chemistry and electrochemistry of composite LiFePO4 materials for secondary lithium batteries, Journal of Physics and Chemistry of Solids, vol.67, pp.1338–1342.10.1016/j.jpcs.2006.01.066 ↗
42. 42) Kwon, S.J., Kim, C.W., Jeong, W.T. and Lee, K.S., (2004): Synthesis and electrochemical properties of olivine LiFePO4 as a cathode material prepared by mechanical alloying, Journal of Power Sources, vol.137, pp.93–99.10.1016/j.jpowsour.2004.05.048 ↗
43. 43) Kosova, N. and Devyatkina, E., (2004): On mechanochemical preparation of materials with enhanced characteristics for lithium batteries, Solid State Ionics, vol.172, pp.181–184.10.1016/j.ssi.2004.03.019 ↗
44. 44) Kim, C.W., Lee, M.H., Jeong, W.T. and Lee, K.S., (2005): Synthesis of olivine LiFePO4 cathode materials by mechanical alloying using iron(III) raw material, Journal of Power Sources, vol.146, pp.534–538.10.1016/j.jpowsour.2005.03.058 ↗
45. 45) Franger, S., Le Cras, F., Bourbon, C. and Rouault, H., (2002): LiFePO4 Synthesis Routes for Enhanced Electrochemical Performance, Electrochemical and Solid-State Letters, vol.5(10), pp.A231–A233.10.1149/1.1506962 ↗
46. 46) Weimer, A. W., (1997): “Carbide, nitride, and boride materials synthesis and processing”, Chapman & Hall, London, U.K.10.1007/978-94-009-0071-4 ↗
47. 47) Schubert, U. and Hüsing, N., (2005): “Synthesis of inorganic materials”, 2nd ed., Wiley-VCH Verlag GmbH & Co., Weinheim, Germany.
48. 48) Barker, J., Saidi, M. Y. and Swoyer, J. L., (2003): Lithium iron(II) phospho-olivines prepared by a novel carbothermal reduction method, Electrochemical Solid-State Letters, vol.6, pp.A53–A55.10.1149/1.1544211 ↗
49. 49) Zhu, B. Q., Li, X. H., Wang, Yh. X. and Guo, H. J., (2006): Novel synthesis of LiFePO4 by aqueous precipitation and carbothermal reduction, Materials Chemistry and Physics, vol.98, pp.373–376.10.1016/j.matchemphys.2005.09.046 ↗
50. 50) Mi, C. H., Cao, G. S. and Zhao, X. B., (2005): Low-cost, one-step process for synthesis of carbon-coated LiFe-PO4 cathode, Materials Letters, vol.59, pp.127–130.10.1016/j.matlet.2004.07.051 ↗
51. 51) Liu, H., Zhang, P., Li, G. C., Wu, Q., and Wu, Y. P., (2008): LiFePO4/C composites from carbothermal reduction method, Journal of Solid State Electrochemistry, vol.12, pp.1011–1015.10.1007/s10008-007-0478-y ↗
52. 52) Liu, H. P., Wang, Z. X., Li, X. H., Guo, H. J., Peng, W. J., Zhang, Y. H. and Hu, Q. Y., (2008): Synthesis and electrochemical properties of olivine LiFePO4 prepared by a carbothermal reduction method, Journal of Power Sources, vol.184, pp.469–472.10.1016/j.jpowsour.2008.02.084 ↗
53. 53) Wang, L., Liang, G. C., Ou, X. Q., Zhi, X. K., Zhang, J. P. and Cui, J. Y., (2009): Effect of synthesis temperature on the properties of LiFePO4/C composites prepared by carbothermal reduction, Journal of Power Sources, vol.189, pp.423–428.10.1016/j.jpowsour.2008.07.032 ↗
54. 54) Zhong, M. E. and Zhou, Z.T., (2010): Preparation of high tap-density LiFePO4/C composite cathode materials by carbothermal reduction method using two kinds of Fe3+ precursors, Materials Chemistry and Physics, vol.119, pp.428–431.10.1016/j.matchemphys.2009.09.017 ↗
55. 55) Zhi, X., Liang, G., Wang, L., Ou, X., Zhang, J. and Cui, J., (2008): The cycling performance of LiFePO4/C cathode materials, Journal of Power Sources, vol.189(1), pp.779–782.10.1016/j.jpowsour.2008.07.082 ↗
56. 56) Liu, H., Xie, J. and Wang, K., (2008): Synthesis and characterization of LiFePO4/(C+Fe2P) composite cathodes, Solid State Ionics, vol.179, pp.1768–1771.10.1016/j.ssi.2008.01.065 ↗
57. 57) Yu, F., Zhang, J., Yang, Y. and Song, G., (2009): Reaction mechanism and electrochemical performance of LiFePO4/C cathode materials synthesized by carbothermal method, Electrochimica Acta, vol.54, pp.7389–7395.10.1016/j.electacta.2009.07.071 ↗
58. 58) Delacourt, C., Laffont, L., Bouchet, R., Wurm, C., Leriche, J.B., Morcrette, M., Tarascon, J.-M. and Masqueliera, C., (2008): Toward Understanding of Electrical Limitations (Electronic, Ionic) in LiMPO4 (M = Fe, Mn) Electrode Materials, Journal of The Electrochemical Society, vol.152(5), pp.A913–A921.10.1149/1.1884787 ↗
59. 59) Higuchi, M., Katayama, K., Azuma, Y., Yukawa, M. and Suhara, M., (2003): Synthesis of LiFePO4 cathode material by microwave processing, Journal of Power Sources, vol.119–121, pp.258–261.10.1016/S0378-7753(03)00243-X ↗
60. 60) Park, K. S., Son, J. T., Chung, H. T., Kim, S. J., Kim, C. H., Lee, C. H. and Kim, H. G., (2003): Synthesis of LiFePO4 by co-precipitation and microwave heating, Electrochemistry Communications, vol.5, pp.839–842.10.1016/j.elecom.2003.08.005 ↗
61. 61) Wang, L., Huang, Y., Jiang, R. and Jia, D., (2007): Preparation and characterization of nano-sized LiFe-PO4 by low heating solid-state coordination method and microwave heating, Electrochimica Acta, vol.52, pp.6778–6783.10.1016/j.electacta.2007.04.104 ↗
62. 62) Beninati, S., Damen, L., Mastragostino, M., (2008): MW-assisted synthesis of LiFePO4 for high power applications, Journal of Power Sources, vol.180, pp.875–879.10.1016/j.jpowsour.2008.02.066 ↗
63. 63) Murugan, A. V., Muraliganth, T. and Manthiram, A., (2008): Rapid microwave-solvothermal synthesis of phospho-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries, Electrochemistry Communications, vol.10, pp.903–906.10.1016/j.elecom.2008.04.004 ↗
64. 64) Bykov, Y. V., Rybakov, K. I. and Semenov, V. E., (2001): High-temperature microwave processing of materials, Journal of Physics D: Applied Physics, vol.34, pp.R55–R75.10.1088/0022-3727/34/13/201 ↗
65. 65) Li, W., J. Ying, Wan, C., Jiang, C., Gao, J. and Tang, C., (2007): Preparation and characterization of LiFePO4 from NH4FePO4· H2O under different microwave heating conditions, Journal of Solid State Electrochemistry, vol.11(6), pp.799–803.
66. 66) Zhang, Y., Feng, H., X. Wu, L. Wang, A. Zhang, T. Xia, H. Dong and M. Liu, (2009): One-step microwave synthesis and characterization of carbon-modified nano-crystalline LiFePO4, Electrochimica Acta, vol.54(11), pp.3206–3210.10.1016/j.electacta.2008.11.033 ↗
67. 67) Guo, X. F., Zhan, H., Zhou, Y. H., (2009): Rapid synthesis of LiFePO4/C composite by microwave method, Solid State Ionics, vol.180, pp.386–391.10.1016/j.ssi.2008.11.021 ↗
68. 68) Song, M. S., Kang, Y. M., Kim, J. H., Kim, H. S., Kim, D. Y., Kwon, H. S. and Lee, J. Y., (2007): Simple and fast synthesis of LiFePO4-C composite for lithium rechargeable batteries by ball-milling and microwave heating, Journal of Power Sources, vol.166(1), pp.260–265.10.1016/j.jpowsour.2006.12.092 ↗
69. 69) Zou, H., Zhang, G. and Shen, P. K., (2009): Intermittent microwave heating synthesized high performance spherical LiFePO4/C for Li-ion batteries, Materials Research Bulletin, Article in Press, doi:10.1016/j.materresbull.2009.09.031.10.1016/j.materresbull.2009.09.031 ↗
70. 70) Song, M. S., Kang, Y. M., Kim, Y. I., Park, K. S. and Kwon, H. S., (2009): Nature of Insulating-Phase Transition and Degradation of Structure and Electro-chemical Reactivity in an Olivine-Structured Material, LiFePO4, Inorganic Chemistry, vol.48(17), pp.8271–8275.10.1021/ic9009114 ↗
71. 71) Muraliganth, T., Murugan, A. V. and Manthiram, A., (2008): Nanoscale networking of LiFePO4 nanorods synthesized by a microwave-solvothermal route with carbon nanotubes for lithium ion batteries, Journal of Materials Chemistry, vol.18(46), pp.5661–5668.10.1039/b812165f ↗
72. 72) Jegal, J.P. and Kim, K.B. (2008): Preparation of Vanadium Oxide Nano Particles by Microwave Synthesis for Electrochemical Capacitor Application, 213th ECS Meeting, Abstract #34, Phoenix, Arizona, U.S.A.10.1149/MA2008-01/1/34 ↗
73. 73) Beninati, S., Damen, L. and Mastragostino, M., (2009): Fast sol-gel synthesis of LiFePO4/C for high power lithium-ion batteries for hybrid electric vehicle application, Journal of Power Sources, vol.194, pp.1094–1098.10.1016/j.jpowsour.2009.06.035 ↗
74. 74) Zhou, W.J. He, W., Li, Z.M. Zhao, H.S. and Yan, S.P., (2009): Biosynthesis and electrochemical characteristics of LiFePO4/C by microwave processing, Journal of Solid State Electrochemistry, vol.13(12), pp.1819–1823.10.1007/s10008-008-0762-5 ↗
75. 75) Li, P., He, W., Zhao, H. and Wang, S., (2009): Biomimetic synthesis and characterization of the positive electrode material LiFePO4, Journal of Alloys and Compounds, vol.471(1–2), pp.536–538.10.1016/j.jallcom.2008.04.030 ↗
76. 76) Wold, A. and Dwight, K., (1993): “Solid state chemistry: synthesis, structure, and properties of selected oxides and sulfides”, Chapman & Hall Inc., New York, U.S.A.
77. 77) Avvakumov, E. G., Senna, M. and Kosova, N., (2001): “Soft mechanochemical synthesis: a basis for new chemical Technologies”, Kluwer Academic Publishers, New York, U.S.A.
78. 79) Yang, S., Zavalij, P. Y. and Whittingham, M. S., (2001): Hydrothermal synthesis of lithium iron phosphate cathodes, Electrochemistry Communications, vol.3, pp.505–508.10.1016/S1388-2481(01)00200-4 ↗
79. 80) Yang, S., Song, Y., Zavalij, P. Y. and Whittingham, M. S., (2002): Reactivity, stability and electrochemical behavior of lithium iron phosphates, Electrochemistry Communications, vol.4, pp.239–244.10.1016/S1388-2481(01)00298-3 ↗
80. 81) Chen, J. and Whittingham, M. S., (2006): Hydrothermal synthesis of lithium iron phosphate, Electrochemistry Communications, vol.8, pp.855–858.10.1016/j.elecom.2006.03.021 ↗
81. 82) Chen, J., Wang, S. and Whittingham, M. S., (2007): Hydrothermal synthesis of cathode materials, Journal of Power Sources, vol.174, pp.442–448.10.1016/j.jpowsour.2007.06.189 ↗
82. 83) Jin, B. and Gu, H. B., (2008): Preparation and characterization of LiFePO4 cathode materials by hydrothermal method, Solid State Ionics, vol.178, pp.1907–1914.10.1016/j.ssi.2007.12.057 ↗
83. 84) Meligrana, G., Gerbaldi, C., Tuel, A., Bodoardo, S. and Penazzi, N., (2006): Hydrothermal synthesis of high surface LiFePO4 powders as cathode for Li-ion cells, Journal of Power Sources, vol.160, pp. 516–522.10.1016/j.jpowsour.2005.12.067 ↗
84. 85) Bodoardo, S., Gerbaldi, C., Meligrana, G., Tuel, A., Enzo, S. and Penazzi, N., (2009): Optimization of some parameters for preparation of nanostructured LiFe-PO4/C cathode, Ionics, vol.15, pp.19–26.10.1007/s11581-008-0259-3 ↗
85. 86) Ou, X., Liang, G., Wang, L., Xu, Sh. and Zhao, X., (2008): Effects of magnesium doping on electronic conductivity and electrochemical properties of LiFePO4 prepared via hydrothermal route, Journal of Power Sources, vol.184, pp.543–547.10.1016/j.jpowsour.2008.02.077 ↗
86. 87) Jin, E. M., Jin, B., Jun, D. K., Park, K. H., Gu, H. B. and Kim, K. W., (2008): A study on the electrochemical characteristics of LiFePO4 cathode for lithium polymer batteries by hydrothermal method, Journal of Power Sources, vol.178, pp.801–806.10.1016/j.jpowsour.2007.09.073 ↗
87. 88) Chen, J., Vacchio, M. J., Wang, S., Chernova, N., Zavalij, P. Y. and Whittingham, M. S., (2008): The hydrothermal synthesis and characterization of olivines and related compounds for electrochemical applications, Solid State Ionics, vol.178, pp.1676–1693.10.1016/j.ssi.2007.10.015 ↗
88. 89) Xu, J., Chen, G. and Li, X., (2009): Electrochemical performance of LiFePO4 cathode material coated with multi-wall carbon nanotubes, Materials Chemistry and Physics, vol.118, pp.9–11.10.1016/j.matchemphys.2009.07.019 ↗
89. 90) Zhang, C., Huang, X., Yin, Y., Dai, J. and Zhu, Z., (2009): Hydrothermal synthesis of monodispersed LiFePO4 cathode materials in alcohol-water mixed solutions, Ceramics International, vol.35, pp.2979–2982.10.1016/j.ceramint.2009.02.024 ↗
90. 91) Xu, Ch., Lee, J. and Teja, A. S., (2008): Continuous hydrothermal synthesis of lithium iron phosphate particles in subcritical and supercritical water, The Journal of Supercritical Fluids, vol.44, pp.92–97.10.1016/j.supflu.2007.09.001 ↗
91. 92) Lee, J. and Teja, A. S., (2005): Characteristics of lithium iron phosphate (LiFePO4) particles synthesized in subcritical and supercritical water, The Journal of Supercritical Fluids, vol.35, pp.83–90.10.1016/j.supflu.2004.12.005 ↗
92. 93) Lee, J. and Teja, A. S., (2006): Synthesis of LiFePO4 micro and nanoparticles in supercritical water, Materials Letters, vol.60, pp.2105–2109.10.1016/j.matlet.2005.12.083 ↗
93. 94) Aimable, A., Aymes, D., Bernard, F. and Le Cras, F., (2009): Characteristics of LiFePO4 obtained through a one step continuous hydrothermal synthesis process working in supercritical water, Solid State Ionics, vol.180, pp.861–866.10.1016/j.ssi.2009.02.019 ↗
94. 95) Sangeeta, D. and LaGraff, J. R., (2005): “Inorganic materials chemistry desk reference”, CRC Press, 2nd ed., Florida, U.S.A.10.1201/9781420041422 ↗
95. 96) Bergna, H. E. and Roberts, W.O., (2006): “Colloidal silica: fundamentals and applications”, CRC Press, 2nd ed., Florida, U.S.A.
96. 97) Brinker, C. J. and Scherer, G. W., (1990): “Sol-gel science: the physics and chemistry of sol-gel processing”, Academic Press Inc., San Diego, CA, U.S.A.
97. 98) Hench, L. L. and West, J. K., (1990): The Sol-Gel process, Chemical Reviews, vol.90, pp.33–72.10.1021/cr00099a003 ↗
98. 99) Rana, K., Sil, A. and Ray, S., (2009): Synthesis of ribbon type carbon nanostructure using LiFePO4 catalyst and their electrochemical performance, Materials Research Bulletin, vol.44, pp.2155–2159.10.1016/j.materresbull.2009.08.019 ↗
99. 100) Arumugam, D., Kalaignan, G.P. and Manisankar, P., (2009): Synthesis and electrochemical characterizations of nano-crystalline LiFePO4 and Mg-doped LiFePO4 cathode materials for rechargeable lithiumion batteries, Journal of Solid State Electrochemistry, vol.13, pp.301–307.10.1007/s10008-008-0533-3 ↗
100. 101) Dominko, R., Goupil, J. M., Bele, M., Gaberscek, M., Remskar, M., Hanzel, D. and Jamnik, J. (2005): Impact of LiFePO4/C Composites Porosity on Their Electro-chemical Performance, Journal of The Electrochemical Society, vol.152(5), pp.A858–A863.10.1149/1.1872674 ↗