journal article·2010Open access

The Properties of Cenospheres and the Mechanism of Their Formation During High-Temperature Coal Combustion at Thermal Power Plans

Vladimir Borisovich Fenelonov, Maxim Sergeevich Mel’gunov, Valentin N. Parmon

KONA Powder and Particle Journal· Volume 28· Issue 0

Abstract

A systematic analysis of the probable scenario of the supramolecular structure (texture) formation of mineral products, formed during the high-temperature combustion of pulverized bituminous coals at thermal power plants (TPP) is provided. The general physico-chemical consideration of the processes that occur at different stages (heating, burning, viscoplastic state in the hot zone, and cooling) during the combustion of bituminous coal makes it possible to allocate the following systematic transformations: coal → char → network structures (including plerospheres)→cenospheres→fly ash..
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Coal Properties and Utilization · Coal and Its By-products · Coal Combustion and Slurry Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Boreskov Institute of Catalysis, SB RAS

References (100+)

Show source-provided references
1. 1) Kizelshteyn, J., Dubov, I.V., Shpitsgluz, A.L. and Parada, S.P. (1995): “Ash and Slag Components of TPP”, Energoatomizdat, Moscow, p.176 (in Russian).
2. 2) Zyrynov, V. V., Zyrynov, D.V. (2009): “Fly Ash- raw material”, Maska, Moscow, p.320. (in Russian).
3. 3) Shpirt, M.Ya., Clare, V.R. and Persikov, I.Z. (1990): “Inorganic Constituents of Solid Fuels”, Chemistry, Moscow, Russia, p.382. (in Russian).
4. 4) Sear, L.K.A. (2001): “The Properties and Use of Coal Fly Ash”, Thomas Telford Ltd, London, England, p.220.10.1680/pauocfa.30152 ↗
5. 5) Drozhzhin, V.S., Piculin, I.V., Kuvaev, M.D. et al. (2005): Technical Monitoring of Microspheres from Fly Ashes of Electric Power Stations, in the Proc. of World of Coal Ash Conference, April 11–14, Lexington, Kentucky, USA, pp.113–114.
6. 6) Chock, D. P., Winkler, S, and Chen, C. (2000): A study of the association between daily mortality and ambient air pollutant concentration in Pittsburg, Pencylvania: J. Air Waste Manage Assoc., Vol. 50, pp.1481–1493.10.1080/10473289.2000.10464170 ↗
7. 7) Anderson, H. R., Bremner, S. A., Atkinson, R. W., Harrison, R. W. and Walters, S. (2001): Particulate matter and daily mortality and hospital admissions in the west midlands conurbation of the U. K. associations with fine and coarse particles, black smoke and sulfate, Occupational Environ. Med., Vol. 58, pp.504–510.10.1136/oem.58.8.504 ↗
8. 8) Heiken, G. and Wohletz, K. (1985): “Volcanic ash”, University of California Press, Berkely, USA, p.201.10.1525/9780520420168 ↗
9. 9) Vereshagina, T.A., Anshits, N.N., Zykova, I.D. Salanov, A.N., Tretyakov, A.A. and Anshits, A.G.: Obtaining of cenospheres from power ashes with stabilized composition and their properties, Chem. Sustain. Develop., Vol. 9, (2001), pp.379–391 (in Russian).
10. 10) Vereshagin, S.N., Kurteeva, L.I. and Anshits, A.G. (2008): Contents of particles of various size and density in concentrates of cenospheres fly ashes from burning of coals from Kuznetsk Basin, Chem. Sustain. Develop. Vol. 16, pp.529–536 (in Russian).
11. 11) Fisher, G. L., Chang, D.P.Y. and Brummer, M. (1976): Fly ash collected from electrostatic precipitators: Microcrystalline structures and the mystery of the spheres, Science, Vol.192, pp.553–555.10.1126/science.192.4239.553 ↗
12. 12) Raask, E. (1985): “Mineral Impurities in Coal Combustion? Behavior, Problems, and Remedial Measures”, Hemisphere Publ. Corp., New York, USA.
13. 13) Vassilev S.V., Menendez R., Borrego A.G., Diaz-Somoano M. and Martinez-Tarazona M. R. (2004): Phase-mineral and chemical composition of coal fly ashes as a basis for their multicomponent utilization. 3. Characterization of magnetic and char concentrates, Fuel, Vol.83, pp.1563–1583.10.1016/j.fuel.2004.01.010 ↗
14. 14) Bryers, R.W. (1996): Fireside slagging, fouling and high-temperature corrosion at heat transfer surface due to impurities in steam raising fuels, Prog. Energy Combust Sci., Vol.22, pp.29–120.10.1016/0360-1285(95)00012-7 ↗
15. 15) Ngu, L.-n, Wu, H. and Zhang, D.K. (2007): Characterization of ash cenospheres in fly ash from Australian power stations, Energy & Fuels, Vol.21, pp.3437–3445.10.1021/ef700340k ↗
16. 16) Vereshagin, S.N., Anshits, N.N., Salanov, A.N., Sharonova, O. M., Vereshagina, T.A. and Anshits, A.G. (2003): Microspheres of fly ash as a source for catalytic supports, adsorbents and catalysts, Chem. Sustain. Develop, Vol.11, pp.303–308.
17. 17) Yu, D., Xu, M., Yu, Y., Lin, X, (2005): Swelling behavior of Chinese bituminous coal at different pyrolysis temperatures, Energy & Fuel, Vol.19, pp.2448–2494.10.1021/ef0501647 ↗
18. 18) Koopman, M., Chawla, K.K., Ricci, W., Carlisle, K., Gladsyz, G.M., Labor, M., Jones, M.L., Kerr, K., George, M., Gouadec, G. and Tournie, A. (2009): Titania-coated glass micro-balloons and cenospheres for environmental applications, J. Mater. Sci., Vol.44, pp.1435–1341.10.1007/s10853-008-2963-9 ↗
19. 19) Wang, S. (2008): Application of solid ash based catalysts in heterogenic catalysis, Environ. Sci. Technol., Vol. 42, pp.7055–7063.10.1021/es801312m ↗
20. 20) Oh, M.S., Peter, W.A. and Howard, J.B. (1989): An Experimental and Modeling Study of Softening Coal Pyrolysis, AIChE J., Vol.35, pp.775–782.10.1002/aic.690350509 ↗
21. 21) Sheng, C. and Azevedo, J.L.T. (2000): Modeling evolution of particles coal at combustion, Proceed. Combust. Institute, Vol.28, pp.2225–2230.10.1016/S0082-0784(00)80632-3 ↗
22. 22) Matsuoka, K., Akino, H., Xu, W.C., Gupta, R.D, Wall, T.E., and Tomita, A. (2005): The Physical character of coal char formed during rapid pyrolysis at high pressure, Fuel, Vol.94, pp.63–69.10.1016/j.fuel.2004.07.006 ↗
23. 23) Seames, W.S. (2003): An initial study of the fine fragmentation fly ash particle mode generated during pulverized coal combustion, Fuel Process & Technology, Vol.81, p.109.10.1016/S0378-3820(03)00006-7 ↗
24. 24) Frandsen, F.J. (2009): Ash research from palm coast, Florida to Banff, Canada: entry of biomass in modern power boiler, Energy & Fuels, Vol. 23, pp.3347–33878.10.1021/ef8010355 ↗
25. 25) Sarcar, A., Rano, R, Mishra, K., K., and Mazumder, A. (2008): Characterization of cenospheres collected from ash-pond of a super thermal power plant, Energy Sources, Part A: Recovery, Utilization, and Environment Effects, Vol. 30, pp.271–283.10.1080/00908310600713883 ↗
26. 26) Dutta, K., Garg, A., Sangal, S., Mishra, B. K., Vankar, P., and Rohatgi, P. R. (2005),: in “Energy Tends in Mineral Processing and Extractive Metallurgy, Eds. Misra, V. N., Das, S. C., and Subbaiah, T., Allied Publ., New Delhi, pp.3–7.
27. 27) Goodarzi, F. and Sanai, H. (2009): Plerosphere and its role in reduction of the emitted fine ash particles from pulverized coal-fired power plants, Fuel, Vol. 88, pp.382–386.10.1016/j.fuel.2008.08.015 ↗
28. 28) Shibaoka, M., and Paulson, C. A. J. (1986): Genesis of char and ash plerospheres, Fuel, Vol. 65, pp.1020–1022.10.1016/0016-2361(86)90217-6 ↗
29. 29) Fenelonov, V.B. (2004): “Introduction to Physical Chemistry of the Formation of Supra-molecular Structure of Adsorbents and Catalysts”, 2 ed., Novosibirsk, SB RAS, p.440. (in Russia).
30. 30) Fenelonov, V.B. and Mel’gunov, M. S. (2006): Texturology, in “Surface and Molecular Catalysis” by ed. R. Richards, Taylor & Francis, New York, pp.257–336.10.1201/9781420015751.ch9 ↗
31. 31) Blanco, F., Garsia, P., Mateos, P., and Ayala, J. (2000): Characteristics and properties of lightweight concrete manufactured with cenospheres, Cement and Concrete Research, Vol. 30, pp.1715–1722.10.1016/S0008-8846(00)00357-4 ↗
32. 32) Moreno, N., Querol, X. J, Andres, M., Stanton, K., Towler, M., Nugteren, H., Janssen-Jurkovicova, M., and Jones, R. (2005): Physico-chemical characteristics of European pulverized coal combustion fly ash, Fuel, Vol. 84, pp.1351–1363.10.1016/j.fuel.2004.06.038 ↗
33. 33) Gehlhoff, G. and Thomas, M.Z. (1926): Die physikalischen Eigenschaften der Glaser in Abhangigkeit von der Zusammensetzung, Z. Techn. Physik, Vol.7, pp.105–126.
34. 34) Sun, K., Safford, H.W. and Silverman, A. (1940): Review of the relation of density and refractive index to the composition of glass: J. Amer. Ceram. Soc., Vol.23, pp.315–326.10.1111/j.1151-2916.1940.tb16027.x ↗
35. 35) Huggins, M.L. and Sun, K.H. (1943): Calculation of density and optical constants of a glass from its composition in weight percentage, J. Amer. Ceram. Soc., Vol.26, pp.4–11.10.1111/j.1151-2916.1943.tb15176.x ↗
36. 36) Elliott, M.J. (1945): Glass composition and density changes, J. Amer. Ceram. Soc., Vol.28, pp.303–308.10.1111/j.1151-2916.1945.tb14497.x ↗
37. 37) Appen, A.A. and Gan, Fu-xi. (1959): Necotorye obshchie zacomernosti izmenenniya svoistv silicatnyich stekol, J. Appl. Chem. (Russ.), Vol.32, pp.983–1206.
38. 38) Naik, H.K., Mishra, M.K., Rao Karanam, U.M. and Deb, D. (2009): Evaluation of the role of a cationic surfactant on the flow characteristics of fly ash slurry, J. Hazard. Matter, Vol. 169, pp.1134–1140.10.1016/j.jhazmat.2009.03.016 ↗
39. 39) Ghosal, S. and Self, S.A. (1995): Particle size-density relation and cenosphere content of coal fly ash. Fuel, Vol.74, pp.522–529.10.1016/0016-2361(95)98354-H ↗
40. 40) Vassilev, S.V. and Vassileva, C.G. (2007): A new approach for the classification of the coal fly ash based on their origin, composition, properties and behavior, Fuel, Vol.86, pp.1490–1512.10.1016/j.fuel.2006.11.020 ↗
41. 41) Bayat, B. (2002): Comparative study of adsorption properties of Turkish fly ash J. Hazard. Matter, Vol.95, pp.251–290.10.1016/S0304-3894(02)00141-3 ↗
42. 42) Lester, E., Cloke, M. and Allen, M. (1996): Char characterization using image analysis techniques, Energy & Fuels, Vol.10, pp.696–703.10.1021/ef9501713 ↗
43. 43) Sarofim, A. F., Howard, J. B. and Padia, A.S. (1977): Physical transformation of the mineral matter in pulverized coal under simulated combustion condition, Combust. Sci. Techn., Vol. 16, pp.187–204.10.1080/00102207708946804 ↗
44. 44) Flagan, R. C. and Friedlander, S. K. (1978): in Shaw, D. N. (ed.), Recent Developments in Aerogel Science, Wiley-Intersci., New York, pp.25–59.
45. 45) Raask, E. (1986): Flame vitrification and sintering characteristics, ACS Symp. Ser., Vol. 301, pp.138–115.10.1021/bk-1986-0301.ch011 ↗
46. 46) Smoot, L.D. (ed.) (1993): “Fundamentals of Coal Combustion”, Elsevier Sci., New York.
47. 47) Smoot, L.D. and Smith, P.J. (1985): “Coal Combustion and Gasification”, Plenum Press, New York, USA.10.1007/978-1-4757-9721-3 ↗
48. 48) Lahaye, L., Prado, G., (eds.) (1987): “Fundamentals of the Physical-Chemistry of Pulverized Coal Combustion”, Kluver Acad. Publ., Dardrecht.10.1007/978-94-009-3661-4 ↗
49. 49) Lighty, J. S., Veranth, J. M., and Sarofim, A.F. (2000): 2000 critical review -combustion aerosols: factors governing their size and composition and implications to human health, J. Air & Waste Manage. Assoc., Vol. 50, pp.1565–1622.10.1080/10473289.2000.10464197 ↗
50. 50) Bartok, W. and Sarofim, A. F. (1991): “Fossil fuel combustion, a source book,” John Wiley & Sons Inc., New York, p.866.
51. 51) Christensen, K. A. (1995): “The Formation of Submicron Particles from the Combustion of Straw”, Ph. D. Thesis, Techn. Univ. Denmark, Lyngby, Denmark,10.1016/0021-8502(95)90180-9 ↗
52. 52) Lind, T. (1999): “Ash formation in circulating fluidized bed combustion of coal and solid biomass”, Ph. D. Thesis, Helsinki Univ.Technol., Espoo, Finland.
53. 53) Wiinikka, H. (2005): “High Temperature Aerosol Formation and Emission Minimisation during Combustion of Wood Pellets”, Ph. D. Thesis Lulea University Technol, Pitea, Sweden,
54. 54) Sundback, C. A., Helbe, J. J., Boni, A. A., Shah, N., Huffman, C. P. and Huggins, E. F. (1984): XX Intern. Symp. Combustion, The Combustion Inst., Pittsburg, pp.1495–1501.
55. 55) Dunn-Rankin, D., and Kerstein, A. R. (1987): Numeral simulation of particle size distribution evolution during pulverized coal combustion, Combust. Flame, vol. 69, pp.193–209.10.1016/0010-2180(87)90031-9 ↗
56. 56) Srinivasachar, S., Toqan, M.A., Beer, J. M. and Ettouney, H.M. (1988): Percolation model for coal char particles combustion and fragmentation, Combust. Sci. Technol., Vol.57, pp. 55–70.10.1080/00102208808923943 ↗
57. 57) Arene, U., Cammarota, A., Massimilla, L., Siciliano, L. and Basu, P. (1990): Carbon attrition during the combustion of a char in a circulating fluidized bed, Combust. Sci. Technol., Vol. 73, pp.383–394.10.1080/00102209008951658 ↗
58. 58) Chirone, R., Massimilla, L. and Salatino, P. (1991): Comminution of carbons in fluidized bed combustion, Progr. Energy Combust. Sci., Vol. 17, pp.297–326.10.1016/0360-1285(91)90006-9 ↗
59. 59) Mitchell, R. and Akanetuk (1996): The impact of fragmentation on char conversion during pulverized coal combustion, XVI Intern. Symp. Combustion, The Combustion Inst., Pittsburg, pp.3137–3144.10.1016/S0082-0784(96)80158-5 ↗
60. 60) Leckner, B. (1998): Fluidized bed combustion: mixing and pollutant limitation, Progr. Energy Combust. Sci., Vol. 24, pp.31–61.10.1016/S0360-1285(97)00021-X ↗
61. 61) Kurniawan, N., Griffits, K., Gralton, T., T. and Ray, R. (2007): Development of fragmentation models for solid fuel combustion and gasification as subroutines for inclusion in CFD codes, Fuel, Vol.86, pp.2221–2231.10.1016/j.fuel.2007.05.060 ↗
62. 62) Solomon, P.R. and Hamblen, D.G. (1985): “Chemistry of Coal Conversion” (Ed. Schlosberg, R.H.), Plenum, New York, USA, pp.121–139.10.1007/978-1-4899-3632-5_5 ↗
63. 63) Kerstein, A. R. and Edwards, B. F. (1987): Percolation model for simulation of char oxidation and fragmentation time-histories, Chem. Eng. Sci, Vol. 42, pp.1629–1634.10.1016/0009-2509(87)80167-7 ↗
64. 64) Dacombe, P., Pourkashanian, M., Williams. A. and Yap, L. (1999): Combustion-induced fragmentation behavior of isolated coal particles, Fuel, Vol.78, pp.1847–1857.10.1016/S0016-2361(99)00076-9 ↗
65. 65) Sundback, C. A., Helbe, J. J., Boni, A. A., Shah, N., Huffman, C. P. and Huggins, E. F. (1984): XX Intern. Symp. Combustion, The Combustion Inst., Pittsburg, pp.1495–1501.
66. 67) Salatino, P. and Massimilla, L. (1991): Modeling fragmentation by percolation in combustion of carbon, Powder. Technol., Vol. 66, pp.47–52.10.1016/0032-5910(91)80080-3 ↗
67. 68) Suzuki, A, Yamamoto, T., Aoki, H. and Miura, T. (2002): Percolation model for simulation of coal combustion process, Proceed Combust. Inst., Vol. 29, pp.459.–466.10.1016/S1540-7489(02)80060-8 ↗
68. 69) Kurose, R., Makino, H., Matsuda, H. and Suzuki, A. (2004): Application of percolation model to ash formation process in coal combustion, Energy& Fuel, Vol. 18, pp.1077–1086.10.1021/ef0400159 ↗
69. 70) Kurose, R., Makino, H., Hashimoto, N. and Suzuki, A. (2007): Application of percolation model to particulate matter formation in pressurized coal combustion, Powder. Technol., Vol. 172, pp.50–56.10.1016/j.powtec.2006.10.030 ↗
70. 71) Sahimi, M. (1994): “Application of Percolation Theory”, Taylor & Francis, London, p.258.10.1201/9781482272444 ↗
71. 72) Natusch, D. F. S., Wallace, J. R. and Evans, C. A. (1974): Science, Vol.183, pp.202–204.10.1126/science.183.4121.202 ↗
72. 73) Taylor, D. D. and Flagan, R. C. (1982): The influence of combustion operation conditions on fine particles from coal combustion, Aerosol Sci. Tecnol., Vol. 1, p.103.10.1080/02786828208958581 ↗
73. 74) Senior, C. I., Panagiotou, T., Sarofim, A.F., Helble, J. J.: Formation of ultra-fine particulate matter from pulverized coal combustion, Preprints Symposia AChS, 45 (1), March 2000.
74. 75) Quann, R. J. and Sarofim, A. F. (1982): Vaporization of refractory oxides during pulverized coal combustion, XIX Internat. Symposium on Combustion, The Combustion Inst., Pittsburg, pp. 1429–1440.10.1016/S0082-0784(82)80320-2 ↗
75. 76) Quann, R. J., Neville, M. and Sarofim, A. F. (1990): A laboratory study of effect of coal selection on the amount and composition of combustion generated submicron particles, Combust. Sci. and Tecnol., Vol.74, pp. 245–265.10.1080/00102209008951691 ↗
76. 77) Linder, E. R. and Wall, T. F. (1990): in “Mineral Matter and Ash Deposition from coal”. Eds: Bryers, R. W. and Vorres, K. S., Unated Eng. Transtees, pp.321–331.
77. 78) Jacob, A., Stucki, S. and Struis, R. P. W. J. (1996): Complete heavy metal removal from fly ash by heat treatment: influence of chlorides on evaporation rates, Environ. Sci. Technol., Vol. 30, pp.3275–3283.10.1021/es960059z ↗
78. 79) Ostwald, W. (1901): “Analytisch Chemie”, 3rd ed. Enlelmann, Leipzig, Z. Phys. Chem., Vol. 37, p.385.
79. 80) Madras, G. and McCoy, B. J. (2002): Transition from nucleation and growth to Ostwald ripening, Chem. Eng. Sci., Vol. 57, pp.3809–3818.10.1016/S0009-2509(02)00313-5 ↗
80. 81) Madras, G. and McCoy, B. J. (2003): Continuous distribution theory of Ostwald ripening: comparison with the LSW approach, Chem. Eng. Sci., Vol. 58, pp.2903–2909.10.1016/S0009-2509(03)00156-8 ↗
81. 82) Baldan, A. (2002): Review progress in Ostwald ripening theories and their applications to nickel base superalloys; part I; Ostwald ripening theories, J. Mater. Sci., Vol. 37, pp.2171–2202.10.1023/A:1015388912729 ↗
82. 83) Wu, H., Bryant, G. and Wall, T. (2000): The effect of pressure on ash formation during pulverized coal combustion, Energy & Fuel, Vol.14, pp.745–750.10.1021/ef990080w ↗
83. 84) Neville, M., Quann, R. J., Haynes, B. S. and Sarofim, A. F. (1981): Vaporization and condensation of mineral matter during pulverized coal combustion, P Combust Inst., Vol 18, pp.1267–1274.10.1016/S0082-0784(81)80130-0 ↗
84. 85) Helble, J., Neville and Sarofim, A. F. (1989): Factors determining the primary particles size of flame-generated inorganic aerosols, J. Colloid Interf. Sci., Vol. 128, pp.348–361.10.1016/0021-9797(89)90349-4 ↗
85. 86) Pagels, J., Strand, M., Rissler, J., Szpila, A., Gudmundson, A., Bohgard, M., Lillieblad, L., Sanati, M. and Swietlicki, E. (2003): Characteristics of aerosol particles formed during grate combustion of moist forest residue, J Aerosol. Sci., Vol. 34, pp.1043–1059.10.1016/S0021-8502(03)00077-6 ↗
86. 87) Boman, C., Nordin, A, Bostrom, D. and Ohman, M. (2004): Characterization of inorganic particulate matter from residential combustion of pelletized biomass fuels, Energy & Fuels, Vol.18, pp.338–348.10.1021/ef034028i ↗
87. 88) Gupta, R. P. (2005): Coal research in Newcastle—past, present and future, Fuel, Vol. 84, pp.1176–1188.10.1016/j.fuel.2004.09.028 ↗
88. 89) Markowski, G. R., Ensor, D. S., Hooper, R. G. and Carr, R. C. (1980): A submicron aerosol mode in flue gas from a pulverized coal utility boiler, Environ. Sci. Technol., Vol. 14, pp. 1400–1402.10.1021/es60171a008 ↗
89. 90) Quann, R. J., Sarofim, A. F. (1982): Vaporization of refractory oxides during pulverized coal combustion, P. Combust. Inst., Vol. 19, pp.1429–1440.10.1016/S0082-0784(82)80320-2 ↗
90. 91) Wornat, M. J., Hurt, R. H., Yang, N. Y. C. and Headley, T. J. (1995): Structural and compositional transformation of biomass chars during combustion, Combust. & Fuel, Vol. 100, pp.131–143.10.1016/0010-2180(94)00055-W ↗
91. 92) Yu, D.-X., Xu, M.-X., Yao, H., Liu, X.-W. and Zhou, K. (2008): Effective identification of the three particles modes generated during pulverized coal combustion, Chines. Sci. Bull., Vol. 53, pp.1593–1602.10.1007/s11434-008-0192-x ↗
92. 93) Sethi, V. and Blaswas, P. (1990): Modeling of particle formation and dynamics in a flame incinerator, J. Air Waste Manage. Assoc., Vol.40, pp. 42–46.10.1080/10473289.1990.10466664 ↗
93. 94) Ten Brink, H. M., Smart, J. P., Vleeskens, J. M. and Williamson, J. (1994): Flame transformation and burner slagging in a 2.5 MW furnace firing pulverized coal, Fuel. Vol. 73, pp 1706–1711.10.1016/0016-2361(94)90156-2 ↗
94. 95) Liu, G., Wu, H., Gupta, R. P., Lucas, J. A., Tate, A. G. and Wall, T.F. (2000): Modelling the fragmentation of non-uniform porous char particles during pressurized coal combustion, Fuel, Vol. 79, pp.627–633.10.1016/S0016-2361(99)00186-6 ↗
95. 96) Helbe, J. J., Sarofim, A. F. (1989): Factors determining the primary particles size of flame-generated inorganic aerosols, J Colloid Interf. Sci., Vol. 128, pp.348–362.10.1016/0021-9797(89)90349-4 ↗
96. 97) Saastamoinen, J.J. and Richard, J.R. (1996): Simultaneous drying and pyrolysis of solid fuel particles, Combust. & Flame, Vol.106, pp.288–300.10.1016/0010-2180(96)00001-6 ↗
97. 98) Sun, Q., Li, W., Chen, H. and Li, B. (2003): The variation of structural characteristics of minerals during pyrolysis, Fuel, Vol.82, pp.669–676.10.1016/S0016-2361(02)00356-3 ↗
98. 100) Zhao, Y., Zhang, J., Tian, C., Li, H., Shao, X. and Zheng, C. (2010): Mineralogy and chemical composition on high-calcium fly ashes and density fractions from a coat-fired power plant in china, Energy & Fuels, Vol. 24, p. 834.10.1021/ef900947y ↗
99. 101) Temeczek, J. and Palagniok, H. (2002): Kinetic of mineral matter transformation during coal combustion, Fuel, Vol.81, pp.1251–1258.10.1016/S0016-2361(02)00027-3 ↗
100. 102) Van Krevelen, D. W. (1961): “Coal”, Elsevier. Amsterdam,.