journal article·2013Open access

A Review of Inverse Gas Chromatography and its Development as a Tool to Characterize Anisotropic Surface Properties of Pharmaceutical Solids

Raimundo Ho, Jerry Y.Y. Heng

KONA Powder and Particle Journal· Volume 30· Issue 0

Abstract

Surface properties can profoundly impact the bulk and interfacial behavior of pharmaceutical solids, and also their manufacturability, processability in drug product processes, dissolution kinetics and mechanism in drug delivery. Variation in the inter- and intra-molecular interactions gives rise to anisotropic surface properties of crystalline solids which display direction-dependent characteristics relative to the orientation of the crystal unit structure. Despite its establishment since the 1950s, inverse gas chromatography (IGC) is still an evolving technology in the field of pharmaceutical R&D. In this review, the principles behind IGC as a physicochemical technique to measure the surface properties of solids are presented. The introduction is followed by an overview of its utility in pharmaceutical R&D, spanning a variety of applications including batch-to-batch variability, solid-solid transitions, physical stability, interfacial behavior in powder processing, and more. For anisotropic materials, IGC has been utilized to characterize the heterogeneity of materials using adsorption and energy distribution functions. Recent development and applications of IGC at finite concentration (IGC-FC) to determine the surface heterogeneity distribution of solids are presented. This methodology overcomes a number of limitations associated with traditional experiments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Adsorption, diffusion, and thermodynamic properties of materials · Chemical Thermodynamics and Molecular Structure · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Solid State Chemistry, Global Pharmaceutical Research & Development, Abbott Laboratories

Surfaces and Particle Engineering Laboratory, Department of Chemical Engineering, Imperial College London

References (86)

Show source-provided references
1. 1) Byrn, S. R. et al. (1999): “Solid-State Chemistry of Drugs”. 2nd ed., SSCI, Inc., West Lafayette.
2. 2) Lahav, M. and Leiserowitz, L. (2001): The effect of solvent on crystal growth and morphology, Chemical Engineering Science, vol.56, pp.2245–2253.10.1016/S0009-2509(00)00459-0 ↗
3. 3) Olusanmi, D. et al. (2011): The breakage behaviour of Aspirin under quasi-static indentation and single particle impact loading: Effect of crystallographic anisotropy, International Journal of Pharmaceutics, vol.411, pp.49–63.10.1016/j.ijpharm.2011.03.039 ↗
4. 4) Snyder, R. C. et al. (2008): The evolution of crystal shape during dissolution: Predictions and experiments, Crystal Growth & Design, vol.8, pp.1100–1101.10.1021/cg7008495 ↗
5. 5) Sugano, K. et al. (2006): High throughput solubility measurement with automated polarized light microscopy analysis, Journal of Pharmaceutical Sciences, vol.95, pp.2115–2122.10.1002/jps.20628 ↗
6. 6) Ho, R. et al. (2010): Determination of surface heterogeneity of D-mannitol by sessile drop contact angle and finite concentration inverse gas chromatography, International Journal of Pharmaceutics, vol.387, pp.79–86.10.1016/j.ijpharm.2009.12.011 ↗
7. 7) Duncan-Hewitt, W. C. et al. (1994): Hardness anisotropy of acetaminophen crystals, Pharmaceutical Research, vol.11, pp.616–623.10.1023/A:1018951507534 ↗
8. 8) Chikhalia, V. et al. (2006): The effect of crystal morphology and mill type on milling induced crystal disorder, European Journal of Pharmaceutical Sciences, vol.27, pp.19–26.10.1016/j.ejps.2005.08.013 ↗
9. 9) Rasenack, N. and Muller, B. W. (2002): Crystal habit and tableting behaviour, International Journal of Pharmaceutics, vol.244, pp.45–57.10.1016/S0378-5173(02)00296-X ↗
10. 10) Jia, X. and Williams, R. A. (2001): A packing algorithm for particles of arbitrary shapes, Powder Technology, vol.120, pp.175–186.10.1016/S0032-5910(01)00268-6 ↗
11. 11) Lippold, B. C. and Ohm, A. (1986): Correlation between wettability and dissolution rate of pharmaceutical powders, International Journal of Pharmaceutics, vol.28, pp.67–74.10.1016/0378-5173(86)90148-1 ↗
12. 12) Han, X. et al. (2011): Simultaneous micronization and surface modification for improvement of flow and dissolution of drug particles, International Journal of Pharmaceutics, vol.415, pp.185–195.10.1016/j.ijpharm.2011.05.070 ↗
13. 13) Clint, J. H. (2001): Adhesion and components of solid surface energies, Current Opinion in Colloid & Interface Science, vol.6, pp.28–33.10.1016/S1359-0294(00)00084-4 ↗
14. 14) Lovette, M. A. et al. (2008): Crystal shape engineering, Industrial & Engineering Chemistry Research, vol.47, pp.9812–9833.10.1021/ie800900f ↗
15. 15) Ho, R. et al. (2011): Role of surface chemistry and energetics in high shear wet granulation, Industrial & Engineering Chemistry Research, vol.50, pp.9642–9649.10.1021/ie2009263 ↗
16. 16) Newell, H. E. et al. (2001): The use of inverse phase gas chromatography to measure the surface energy of crystalline, amorphous, and recently milled lactose, Pharmaceutical Research, vol.18, pp.662–666.10.1023/A:1011089511959 ↗
17. 17) Rumondor, A. C. F. et al. (2009): Phase behavior of poly(vinylpyrrolidone) containing amorphous solid dispersions in the presence of moisture, Molecular Pharmaceutics, vol.6, pp.1492–1505.10.1021/mp900050c ↗
18. 18) Fichtner, F. et al. (2008): Effect of surface energy on powder compactibility, Pharmaceutical Research, vol.25, pp.2750–2759.10.1007/s11095-008-9639-7 ↗
19. 19) Chow, A. H. L. et al. (2007): Particle engineering for pulmonary drug delivery, Pharmaceutical Research, vol.24, pp.411–437.10.1007/s11095-006-9174-3 ↗
20. 20) Heng, J. Y. Y. et al. (2006): Anisotropic surface energetics and wettability of macroscopic form I paracetamol crystals, Langmuir, vol.22, pp.2760–2769.10.1021/la0532407 ↗
21. 21) Tswett, M. S. (1906): Physical chemical studies on chlorophyll adsorptions, Berichte der Deutschen botanischen Gesellschaft, vol.24, pp.316–323.10.1111/j.1438-8677.1906.tb06524.x ↗
22. 22) Laub, R. J. andPecsok, R. L. (1978): “Physicochemical Applications of Gas Chromatography”. 99 ed., John Wiley & Sons, New York.
23. 23) Voelkel, A., et al. (2009): Inverse gas chromatography as a source of physiochemical data, Journal of Chromatography A, vol.1216, pp.1551–1566.10.1016/j.chroma.2008.10.096 ↗
24. 24) Tisserand, C., et al. (2009): Comparison of two techniques for the surface analysis of alumina (Al2O3): Inverse Gas Chromatography at Finite Concentration (IGC-FC) and Dynamic Vapor Sorption (DVS), Powder Technology, vol.190, pp.53–58.10.1016/j.powtec.2008.04.058 ↗
25. 25) Thielmann, F. (2004): Introduction into the characterisation of porous materials by inverse gas chromatography, Journal of Chromatography A, vol.1037, pp.115–123.10.1016/j.chroma.2004.03.060 ↗
26. 26) Zhou, Q. and Cadwallader, K. R. (2004): Inverse gas chromatographic method for measurement of interactions between soy protein isolate and selected flavor compounds under controlled relative humidity, Journal of Agricultural and Food Chemistry, vol.52, pp.6271–6277.10.1021/jf049273u ↗
27. 27) Menzel, R., et al. (2009): Inverse gas chromatography of as-received and modified carbon nanotubes, Langmuir, vol.25, pp.8340–8348.10.1021/la900607s ↗
28. 28) Heng, J. Y. Y., et al. (2007): Methods to determine surface energies of natural fibres: a review, Composite Interfaces, vol.14, pp.581–604.10.1163/156855407782106492 ↗
29. 29) Grimsey, I. M., et al. (2002): Analysis of the surface energy of pharmaceutical powders by inverse gas chromatography, Journal of Pharmaceutical Sciences, vol.91, pp.571–583.10.1002/jps.10060 ↗
30. 30) Hancock, B. C., et al. (1997): The use of solubility parameters in pharmaceutical dosage form design, International Journal of Pharmaceutics, vol.148, pp.1–21.10.1016/S0378-5173(96)04828-4 ↗
31. 31) Mermet, J.-M., et al. (2004): “Analytical Chemistry: A Modern Approach to Analytical Science”. 2nd ed., Wiley-VCH Verlag GmbH, Weinheim.
32. 32) Schultz, J., et al. (1987): The role of the interface in carbon fibre-epoxy composites, Journal of Adhesion, vol.23, pp.45–60.10.1080/00218468708080469 ↗
33. 33) Fowkes, F. M. (1964): Attractive forces at interfaces, Industrial and Engineering Chemistry, vol.56, pp.40–52.10.1021/ie50660a008 ↗
34. 34) Dorris, G. M. and Gray, D. G. (1980): Adsorption of normal-alkanes at zero surface coverage on cellulose paper and wood fibers, Journal of Colloid and Interface Science, vol.77, pp.353–362.10.1016/0021-9797(80)90304-5 ↗
35. 35) Panzer, U. and Schreiber, H. P. (1992): On the evaluation of surface interactions by inverse gas chromatography, Macromolecules, vol.25, pp.3633–3637.10.1021/ma00040a005 ↗
36. 36) Gutmann, V. (1966): Coordination chemistry of certain transition-metal ions. The role of solvent, Coordination Chemistry Reviews, vol.2, pp.239–256.10.1016/S0010-8545(00)80206-4 ↗
37. 37) Riddle, F. L. and Fowkes, F. M. (1990): Spectral shifts in acid-base chemistry .1. van der Waals contributions to acceptor numbers, Journal of the American Chemical Society, vol.112, pp.3259–3264.10.1021/ja00165a001 ↗
38. 38) Phuoc, N. H. et al. (1986): Determination of partial solubility parameters of lactose by gas-solid chromatography, Journal of Pharmaceutical Sciences, vol.75, pp.68–72.10.1002/jps.2600750116 ↗
39. 39) Huu-Phuoc, N. et al. (1987): Determination of partial and total cohesion parameters of caffeine, theophylline, and methyl p-hydroxybenzoate by gas-solid chromatography, Journal of Pharmaceutical Sciences, vol.76, pp.406–410.10.1002/jps.2600760514 ↗
40. 40) Ticehurst, M. D. et al. (1994): Determination of the surface-properties of 2 batches of salbutamol sulfate by inverse gas-chromatography, International Journal of Pharmaceutics, vol.111, pp.241–249.10.1016/0378-5173(94)90347-6 ↗
41. 41) Ticehurst, M. D. et al. (1996): Characterisation of the surface properties of alpha-lactose monohydrate with inverse gas chromatography, used to detect batch variation, International Journal of Pharmaceutics, vol.141, pp.93–99.10.1016/0378-5173(96)04619-4 ↗
42. 42) Tong, H. H. Y. et al. (2002): Influence of polymorphism on the surface energetics of salmeterol xinafoate crystallized from supercritical fluids, Pharmaceutical Research, vol.19, pp.640–648.10.1023/A:1015358129817 ↗
43. 43) Grimsey, I. M. et al. (1999): Interpretation of the differences in the surface energetics of two optical forms of mannitol by inverse gas chromatography and molecular modelling, International Journal of Pharmaceutics, vol.191, pp.43–50.10.1016/S0378-5173(99)00284-7 ↗
44. 44) Saxena, A. et al. (2010): A combined modelling and experimental study of the surface energetics of α-lactose monohydrate, Journal of Pharmaceutical Sciences, vol.99, pp.741–752.10.1002/jps.21864 ↗
45. 45) Ohta, M. and Buckton, G. (2004): Determination of the changes in surface energetics of cefditoren pivoxil as a consequence of processing induced disorder and equilibration to different relative humidities, International Journal of Pharmaceutics, vol.269, pp.81–88.10.1016/j.ijpharm.2003.08.015 ↗
46. 46) Hasegawa, S. et al. (2009): Determination of the structural relaxation at the surface of amorphous solid dispersion using inverse gas chromatography, Journal of Pharmaceutical Sciences, vol.98, pp.2133–2139.10.1002/jps.21573 ↗
47. 47) Yokoi, Y. et al. (2004): Changes in surface properties by granulation and physicochemical stability of granulated amorphous cefditoren pivoxil with additives, International Journal of Pharmaceutics, vol.280, pp.67–75.10.1016/j.ijpharm.2004.05.005 ↗
48. 49) Surana, R. et al. (2003): Determination of glass transition temperature and in situ study of the plasticizing effect of water by inverse gas chromatography, Pharmaceutical Research, vol.20, pp.1647–1654.10.1023/A:1026199604374 ↗
49. 50) Otte, A. and Carvajal, M. T. (2011): Assessment of milling-induced disorder of two pharmaceutical compounds, Journal of Pharmaceutical Sciences, vol.100, pp.1793–1804.10.1002/jps.22415 ↗
50. 51) Brum, J. and Burnett, D. (2011): Quantification of surface amorphous content using dispersive surface energy: the concept of effective amorphous surface area, AAPS PharmSciTech, vol.12, pp.887–892.10.1208/s12249-011-9655-5 ↗
51. 52) Storey, R. A. (1997): “The nucleation, growth and solid state properties of particulate pharmaceuticals,”, Ph.D. Dissertation, University of Bradford.
52. 53) Heng, J. Y. Y. (2006): “Anisotropic Surface Properties of Crystalline Pharmaceutical Solids,”, Ph.D. Dissertation, University of London.10.1208/pt070484 ↗
53. 54) Heng, J. Y. Y. et al. (2006): The effects of milling on the surface properties of form I paracetamol crystals, Pharmaceutical Research, vol.23, pp.1918–1927.10.1007/s11095-006-9042-1 ↗
54. 55) Feeley, J. C. et al. (1998): Determination of surface properties and flow characteristics of salbutamol sulphate, before and after micronisation, International Journal of Pharmaceutics, vol.172, pp.89–96.10.1016/S0378-5173(98)00179-3 ↗
55. 56) York, P. et al. (1998): Characterisation of the surface energetics of milled DL-propranolol hydrochloride using inverse gas chromatography and molecular modelling, International Journal of Pharmaceutics, vol.174, pp.179–186.10.1016/S0378-5173(98)00247-6 ↗
56. 57) Tong, H. H. Y. et al. (2006): Predicting the aerosol performance of dry powder inhalation formulations by interparticulate interaction analysis using inverse gas chromatography, Journal of Pharmaceutical Sciences, vol.95, pp.228–233.10.1002/jps.20519 ↗
57. 58) Cline, D. and Dalby, R. (2002): Predicting the quality of powders for inhalation from surface energy and area, Pharmaceutical Research, vol.19, pp.1274–1277.10.1023/A:1020338405947 ↗
58. 59) Das, S. et al. (2009): Surface energy changes and their relationship with the dispersibility of salmeterol xinafoate powders for inhalation after storage at high RH, European Journal of Pharmaceutical Sciences, vol.38, pp.347–354.10.1016/j.ejps.2009.08.007 ↗
59. 60) Traini, D. et al. (2005): Surface energy and interparticle forces correlations in model pMDI formulations, Pharmaceutical Research, vol.22, pp.816–825.10.1007/s11095-005-2599-2 ↗
60. 61) Thielmann, F. et al. (2008): The effect of primary particle surface energy on agglomeration rate in fluidised bed wet granulation, Powder Technology, vol.181, pp.160–168.10.1016/j.powtec.2006.12.015 ↗
61. 62) Newell, H. E. and Buckton, G. (2004): Inverse gas chromatography: Investigating whether the technique preferentially probes high energy sites for mixtures of crystalline and amorphous lactose, Pharmaceutical Research, vol.21, pp.1440–1444.10.1023/B:PHAM.0000036918.79205.4b ↗
62. 63) Thielmann, F. and Pearse, D. (2002): Determination of surface heterogeneity profiles on graphite by finite concentration inverse gas chromatography, Journal of Chromatography A, vol.969, pp.323–327.10.1016/S0021-9673(02)00896-8 ↗
63. 64) Balard, H. (1997): Estimation of the surface energetic heterogeneity of a solid by inverse gas chromatography, Langmuir, vol.13, pp.1260–1269.10.1021/la951526d ↗
64. 65) Jaroniec, M. et al. (1996): Relation between adsorption potential distribution and pore volume distribution for microporous carbons, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.118, pp.203–210.10.1016/S0927-7757(96)03685-0 ↗
65. 66) Rudzinski, W. and Everett, D. H. (1992): “Adsorption of Gases on Heterogeneous Surfaces”, Academic Press, San Diego, CA, USA.10.1016/B978-0-12-601690-1.50003-5 ↗
66. 67) Jaroniec, M. and Madey, R. (1988): “Physical Adsorption on Heterogeneous Solids”. Elsevier, Amsterdam.
67. 68) Sacchetti, M. (2006): The nitrogen adsorption isotherm of alpha-lactose monohydrate, Pharmaceutical Development and Technology, vol.11, pp.351–358.10.1080/10837450600769793 ↗
68. 69) Jaroniec, M. and Choma, J. (1987): Characterization of activated carbons by distribution functions of adsorption potential and micropore dimension, Materials Chemistry and Physics, vol.18, pp.103–117.10.1016/0254-0584(87)90115-5 ↗
69. 70) Kowalczyk, P. (2005): New approach to determination of surface heterogeneity of adsorbents and catalysts from the temperature programmed desorption (TPD) technique: One step beyond the condensation approximation (CA) method, Journal of Colloid and Interface Science, vol.291, pp.334–344.10.1016/j.jcis.2005.05.029 ↗
70. 71) Koch, K. et al. (1997): A new method of analysing temperature-programmed desorption (TPD) profiles using an extended integral equation, Journal of Catalysis, vol.172, pp.187–193.10.1006/jcat.1997.1843 ↗
71. 72) Beta, I. A. et al. (2001): Characterisation of extra-framework cations in zeolites. A temperature-programmed desorption (TPD) study, Journal of Thermal Analysis and Calorimetry, vol.64, pp.1191–1199.10.1023/A:1011553231042 ↗
72. 73) Choudhary, V. R. and Sansare, S. D. (1980): Gas-chromatographic technique for temperature-programmed desorption of reversibly and irreversibly adsorbed species, Journal of Chromatography, vol.192, pp.420–424.10.1016/S0021-9673(80)80019-7 ↗
73. 74) Ho, R. et al. (2009): Crystal habits and the variation in surface energy heterogeneity, Crystal growth & design, vol.9, pp.4907–4911.10.1021/cg900696f ↗
74. 75) Ho, R. et al. (2010): Influence of fines on the surface energy heterogeneity of lactose for pulmonary drug delivery, International Journal of Pharmaceutics, vol.388, pp.88–94.10.1016/j.ijpharm.2009.12.037 ↗
75. 76) Cremer, E. and Huber, H. (1962): Measurement of adsorption isotherms by means of high temperature elution gas chromatography, Proceedings of the International Symposium on Gas Chromatography, vol.3, pp.169.
76. 77) Yla-Maihaniemi, P. P. et al. (2008): Inverse gas chromatographic method for measuring the dispersive surface energy distribution for particulates, Langmuir, vol.24, pp.9551–9557.10.1021/la801676n ↗
77. 78) Das, S. C. et al. (2011): Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography, Langmuir, vol.27, pp.521–523.10.1021/la104135z ↗
78. 79) Volpe, C. D. et al. (2003): Recent theoretical and experimental advancements in the application of van Oss–Chaudury–Good acid–base theory to the analysis of polymer surfaces I. General aspects, Journal of Adhesion Science Technology, vol.17, pp.1477–1505.10.1163/156856103769207365 ↗
79. 80) Della Volpe, C. and Siboni, S. (1997): Some reflections on acid-base solid surface free energy theories, Journal of Colloid and Interface Science, vol.195, pp.121–136.10.1006/jcis.1997.5124 ↗
80. 81) Begat, P. et al. (2004): The cohesive-adhesive balances in dry powder inhaler formulations I: Direct quantification by atomic force microscopy, Pharmaceutical Research, vol.21, pp.1591–1597.10.1023/B:PHAM.0000041453.24419.8a ↗
81. 82) Raula, J. et al. (2010): Investigations on particle surface characteristics vs. dispersion behaviour of l-leucine coated carrier-free inhalable powders, International Journal of Pharmaceutics, vol.385, pp.79–85.10.1016/j.ijpharm.2009.10.036 ↗
82. 83) Thielmann, F. et al. (2007): Determination of the surface energy distributions of different processed lactose, Drug Development and Industrial Pharmacy, vol.33, pp.1240–1253.10.1080/03639040701378035 ↗
83. 84) Shur, J. et al. (2008): The role of fines in the modification of the fluidisation and dispersion mechanism within dry powder inhaler formulations, Pharmaceutical Research, vol.25, pp.1931–1940.10.1007/s11095-008-9538-y ↗
84. 85) Louey, M. D. and Stewart, P. J. (2002): Particle interactions involved in aerosol dispersion of ternary interactive mixtures, Pharmaceutical Research, vol.19, pp.1524–1531.10.1023/A:1020464801786 ↗
85. 86) Jones, M. D. and Price, R. (2006): The influence of fine excipient particles on the performance of carrier-based dry powder inhalation formulations, Pharmaceutical Research, vol.23, pp.1665–1674.10.1007/s11095-006-9012-7 ↗
86. 87) Ho, R. et al. (2012): Effect of milling on particle shape and surface energy heterogeneity of needle-shaped crystals, Pharmaceutical Research, vol.29, pp.2806–2816.10.1007/s11095-012-0842-1 ↗