Producing Pharmaceutical Particles via Electrospraying with an Emphasis on Nano and Nano Structured Particles - A Review
Source abstract
Abstract
Recent advances in nanotechnology offer nano sized or nanostructured pharmaceutical particles, being as small as the size of cells such as receptors or nucleic acids, which can be engineered to provide enhanced efficacy, solubility, or biocompatibility, and to administer at much lower dosages. However, industrial production of these particles is still challenging. Among different techniques, aerosol based ones might be favorable since they are considered as contamination free processes and do not interfere with complex molecules of drugs. We, in this review, consider liquid atomization, where droplet formation is followed by conversion into solid particles. The best candidate is a method, which not only produces mono sized droplets with a diameter smaller than the inside nozzle diameter but also generates small enough start up sizes. Such a method is found in: Electro-Hydrodynamic Atomization (EHDA) or Electrospraying. Electrospraying is now a well practiced technique for producing very fine monodisperse droplets from a liquid under the influence of electrical forces. By controlling the liquid flow rate and the electrostatic potential between the liquid and the counter electrode, droplets within a narrow size range can be generated, while the mean diameter ranges from nanometers up to several micrometers. Besides generating monodisperse droplets, electrosprays are also distinguished by their self dispersing nature due to Coulomb repulsion, the possibility of trajectory control of the produced charged droplets, and the reduced risk of nozzle clogging due to the large size of the orifice compared to the size of the droplets. We will discuss different spraying modes depending on the strength of the electric stresses relative to the surface tension stress on the liquid surface and on the inertia of the liquid leaving the nozzle. However, for the production of monodisperse nanoparticles the so called cone-jet mode will be explained in depth. Scaling laws can be used to estimate the operational conditions for producing nanodroplets of a certain size. Hartman and coworkers refined the scaling laws for EHDA in the Cone-Jet mode using theoretically derived models for the cone, jet, and droplet size. By means of several examples, a generic way to produce nanoparticles, via scaling laws, from a multitude of different precursors will be discussed. Several examples of medicine particles with different properties made by EHDA will be given. Processes based on bipolar coagulation, where oppositely charged carrier particles and nano sized active agents are brought together to form composite drugs, will be discussed. Finally some attention will be given to challenges on out-scaling of EHDA methods for industrial production.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Mass Spectrometry Techniques and Applications · Plant Surface Properties and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Delft University of Technology
References (100+)
Show source-provided references
1. Albert H. L. Chow, Henry H. Y. Tong, Pratibhash Chattopadhyay, and Boris Y. Shekunov. (2007): Particle Engineering for Pulmonary Drug Delivery, Pharmaceutical Research, Vol. 24, No. 3, March 2007.10.1007/s11095-006-9174-3 ↗
2. Almeria, B., Deng, W., Fahmy, T.A. and Gomez, A. (2010): Controlling the morphology of electrospray generated PLGA microparticles for drug delivery, Journal of Colloid and Interface Science, 343, pp.125–133.10.1016/j.jcis.2009.10.002 ↗
3. Arnanthigo, Y., Yurteri, C., Marijnissen, J. and Schmidt-Ott, A. (2010): ‘Improved design of multi-electrospray unit with circular symmetry’, in: Meesters, G., Pfeffer, T.V., Hauser-Vollrath, C. (Eds.), Proceedings of the Sixth World Congress on Particle Technology, paper 616.
4. Bailey, A.G. (1988): “Electrostatic spraying of liquids”, Research Studies Press, Taunton.
5. Barreras, F., H. Amaveda, et al. (2002): Transient high-frequency ultrasonic water atomization, Experiments in Fluids, 33(3): 405–413.10.1007/s00348-002-0456-1 ↗
6. Bhaskar, S., Pollock, K.M., Yoshida, M. and Lahann, J. (2010): Towards designer microparticles: simultaneous control of anisotropv, shape and size, Small, 6 (3), pp. 404–411.10.1002/smll.200901306 ↗
7. Biskos, G., Vons, V., Yurteri, C.U. and Schmidt-Ott, A. (2008): Generation and Sizing of Particles for Aerosol-Based Nanotechnology, KONA Powder and Particle Journal, No 26. pp.13–35.10.14356/kona.26.2008006 ↗
8. Camelot, D.M.A. (1999): “The bipolar coagulation process for powder production”, PhD thesis, Delft University of Technology.10.1021/ie980435j ↗
9. Camelot, D., Marijnissen, J.C.M. and Scarlett, B. (1999): Bipolar coagulation process for the production of powders, Industrial and Engineering Chemistry Research, 38 (3), pp. 631–638.10.1021/ie980435j ↗
10. Champion, J.A., Katare, Y.K. and Mitragotri, S. (2007): Particle shape: A new design parameter for micro- and nanoscale drug delivery carriers, Journal of Controlled Release, 121 (1–2), pp.3–9.10.1016/j.jconrel.2007.03.022 ↗
11. Chang, M.-W., Stride, E. and Edirisinghe, M. (2009): A novel process for drug encapsulation using a liquid to vapour phase change material, Soft Matter, 5 (24), pp.5029–5036.10.1039/b913178g ↗
12. Chang, M.-W., Stride, E. and Edirisinghe, M. (2010): A new method for the preparation of monoporous hollow microspheres, Langmuir, 26 (7), pp.5115–5121.10.1021/la903592s ↗
13. Chen, D. and Pui, D.Y.H. (2010): Electrospray and its medical applications in “Nanoparticles in medicine and environment Inhalation and health effects”, Marijnissen, J.C.; Gradon, Leon (Eds.), Springer.10.1007/978-90-481-2632-3_4 ↗
14. Chen, D. and Pui, D.Y.H. (1997): Experimental investigation of scaling laws for electrospraying: dielectric constant effect, Aerosol Sci. Tech., 27(3), pp.367–380.10.1080/02786829708965479 ↗
15. Chen, D., Pui, D.Y.H., and Kaufman, S. L. (1995): Electrospraying of conducting liquids for monodisperse aerosol generation in the 4 nm to 1.8 μ m diameter range, J. Aerosol Sci., 26(6), pp.963–977.10.1016/0021-8502(95)00027-A ↗
16. Chen, D.-R., Wendt, C.H. and Pui, D.Y.H. (2000): A novel approach for introducing bio-materials into cells, Journal of Nanoparticle Research, 2 (2), pp.133–139.10.1023/A:1010084032006 ↗
17. Chen, X., Jia, L., Yin, X. and Cheng, J. (2005): Spraying modes in coaxial jet electrospray with outer driving liquid, Physics of Fluids, 17, pp.032101:1–7.10.1063/1.1850691 ↗
18. Ciach, T., (2007), Application of Electro Hydro Dynamic Atomization in Drug Delivery, A Review, Journal of Drug Delivery Science and Technology, Volume 17, No: 6, pp.367–375.10.1016/S1773-2247(07)50076-6 ↗
19. Ciach, T., Geerse, K. B. and Marijnissen, J. C. M. (Kanuth, P. and Schoonman, J. eds.) (2002): EHDA in Particle Production in “Nanostructured Materials”, Kluwer Academic Publisher, Boston.
20. Cloupeau, M. and Prunet-Foch, B. (1994): Electrohydrodynamic Spraying Functioning Modes: A critical review, J. Aerosol Sci., 25, pp.1021–1036.10.1016/0021-8502(94)90199-6 ↗
21. Coffee, R.A. (2005): “Dispensing Device”, US patent 6880554.
22. Cole, R.B. (1997): “Electrospmy Ionisation Mass Spectrometry”, Wiley, New York.
23. Coppens, P.F. (2007): “Coating of tribocharged model particles with nanoparticles using EHDA”, MS Thesis, Delft University of Technology, Faculty of Applied Sciences, Nanostructured Materials Research Group, Process and Product Engineering Research Group.
24. Dabkowski, M.F. (2006): “Coating of Particles with Nanoparticles by Means of Electrostatic Forces”, MS Thesis, Delft University of Technology, Faculty of Applied Sciences, Nanostructured Materials Research Group, Process and Product Engineering Research Group.
25. Dabkowski, M.F., van Ommen, J.R., Yurteri, C.U., Hochhaus, G. and, Marijnissen, J.C.M. (2007): ‘The coating of particles with nanoparticles by means of electrostatic forces’, in: Schreglmann, C., Peukert, W. (Eds.), Partec 2007 - CD proceedings, Nuernberg, Germany, paper S37_2.
26. de la Mora, J. F. and Loscertales, I. G. (1994): The Current Emitted by Highly Conducting Taylor Cones, J. Fluid Mechanics, 260, pp.155–184.10.1017/S0022112094003472 ↗
27. De La Mora, J. F., Navascues, J., Fernandez, F. and Rosell-Llompart, J. (1990): Generation of submicron monodisperse aerosols in electrosprays, J. Aerosol Sci., 21 (SUPPL. 1), pp.S673–S676.10.1016/0021-8502(90)90332-R ↗
28. de la Mora, J.F. (2007): The fluid dynamics of Taylor Cones, Annual Review of Fluid Mechanics, 39, pp.217–243.10.1146/annurev.fluid.39.050905.110159 ↗
29. Decuzzi, P., Godin, B., Tanaka, T., Lee, S.-Y., Chiappini, C., Liu, X. and Ferrari, M. (2010): Size and shape effects in the biodistribution of intravascularly injected particles, Journal of Controlled Release, 141 (3), pp.320–327.10.1016/j.jconrel.2009.10.014 ↗
30. Deng, W. and Gomez, A. (2007): Influence of space charge on the scale-up of multiplexed electrosprays, J. Aerosol Sci., 38 (10), pp.1062–1078.10.1016/j.jaerosci.2007.08.005 ↗
31. Deng, W., Waits, C.M., Morgan, B. and Gomez, A. (2009): Compact multiplexing of monodisperse electrosprays, J. Aerosol Sci., 40 (10), pp.907–918.10.1016/j.jaerosci.2009.07.002 ↗
32. Dole, M., Cox, H.L. and Gieniec, J. (1973): Electrospray Mass Spectroscopy Chapter 7, pp. 73–84, in Polymer Molecular Weight Methods, Advances in Chemistry, Vol. 125.10.1021/ba-1973-0125.ch007 ↗
33. Dole, M., Mack, L.L., Hines, R.L., Chemistry, D.O., Mobley, R.C., Ferguson, L.D. and Alice, M.B. (1968): Molecular beams of macroions, The Journal of Chemical Physics, 49 (5), pp.2240–2249.10.1063/1.1670391 ↗
34. Dulcks, T. and Juraschek, R. (1999): Electrospray as an ionisation method for mass spectrometry, J. Aerosol Sci., 30, pp.927–943.10.1016/S0021-8502(98)00781-2 ↗
35. Ellis, N., Yurteri, C.U. and van Ommen, J.R. (2010): Development of a continuous nanoparticle coating with electrospraying, in: Kim, S.D, Kan, Y., Lee, J.K., Seo, Y.C. (Eds.), Fluidization XIII, Engineering Conferences International, New York.
36. Enayati, M., Ahmad, Z., Stride, E. and Edirisinghe, M. (2010): One-step electrohydrodynamic production of drug-loaded micro- and nanoparticles, Journal of the Royal Society Interface, 7 (45), pp.667–675.10.1098/rsif.2009.0348 ↗
37. Felder, C. B., M. J. Blanco-Prieto, et al. (2003): Ultrasonic atomization and subsequent polymer desolvation for peptide and protein microencapsulation into biodegradable polyesters, Journal of Microencapsulation 20(5), pp.553–567.10.3109/02652040309178346 ↗
38. Forde, G., J. Friend, et al. (2006): Straightforward biodegradable nanoparticle generation through megahertz-order ultrasonic atomization, Applied Physics Letters 89(6), art.no.064105.10.1063/1.2221914 ↗
39. Freitas, S., H. P. Merkle, et al. (2004): Ultrasonic atomisation into reduced pressure atmosphere - Envisaging aseptic spray-drying for microencapsulation, Journal of Controlled Release, 95(2), pp.185–195.10.1016/j.jconrel.2003.11.005 ↗
40. Friend, J. R., L. Y. Yeo, et al. (2008): Evaporative self-assembly assisted synthesis of polymeric nanoparticles by surface acoustic wave atomization, Nanotechnology 19(14), art.no.145301.10.1088/0957-4484/19/14/145301 ↗
41. Gañán-Calvo, A. (2003): “Device and Method for Creating Aerosols for Drug Delivery”, US patent 6595202.
42. Gañán-Calvo, A. M., Davila, J. and Barrero, A. (1997): Current and Droplet Size in the Electrospraying of Liquids. Scaling Laws. J. Aerosol Sci., 28, pp.249–275.10.1016/S0021-8502(96)00433-8 ↗
43. Ganán-Calvo, A.M. (2004): On the general scaling theory for electrospraying, Journal of Fluid Mechanics, 507, pp.203–212.10.1017/S0022112004008870 ↗
44. Geerse, K. B. (2003): “Applications of Electrospray: From People to Plants”, PhD thesis, Delft University of Technology.
45. Geerse, K.B. and Marijnissen, J.C.M. (2003) : Electrospray as Means to Produce Monodisperse Drug Particles, pp.75–90, in Gradon, L. and Marijnissen, J. (Editors), “Optimization of Aeorosol Drug Delivery”, Kluwer Academic Publishers.10.1007/978-94-017-0267-6_4 ↗
46. Geller, D.E. (2008): The science of Aerosol Delivery in Cystis Fibrosis, Pediatric Pulmonary 43, S5–S17.10.1002/ppul.20860 ↗
47. Gilbert, W. (1600): “De Magnete”.
48. Gomez, A. and Tang, K. (1994): Charge and fission of droplets in electrostatic sprays. Phys. Fluids., A 6, pp.404–414.10.1063/1.868037 ↗
49. Gomez, A., Bingham, D., De Juan, L. and Tang, K. (1998): Production of protein nanoparticles by electrospray drying, J. Aerosol Sci., 29 (5–6), pp.561–574.10.1016/S0021-8502(97)10031-3 ↗
50. Gomez, A., de la Mora, J.F. and Tang, K. (1999): “Electro-spray Employing Corona-Assisted Cone-Jet Mode”, US patent 5873523.
51. Gonzalez, D., Nasibulin, A.G., Jiang, H., Queipo, P. and Kauppinen, E.I. (2007): Electrospraying of ferritin solutions for the production of monodisperse iron oxide nanoparticles, Chemical Engineering Communications, 194 (7), pp.901–912.10.1080/00986440701215531 ↗
52. Grace, J. M. and Marijnissen, J. C. M. (1994): A Review of Liquid Atomization by Electrical Means. J. Aerosol Sci., 25:6, pp.1005–1019.10.1016/0021-8502(94)90198-8 ↗
53. Gradon, L. and Marijnissen, J. (Editors) (2003): “Optimization of Aeorosol Drug Delivery”, Kluwer Academic Publishers.10.1007/978-94-017-0267-6 ↗
54. Hartman, R. P. A. (1998): “Electrohydrodynamic Atomization in the Cone Jet Mode. From Physical Modeling to Powder Production”, PhD thesis, Delft University of Technology.
55. Hartman, R. P. A., Brunner, D. J., Camelot, D. M. A., Marijnissen, J. C. M. and Scarlett, B. (1999): Electrohydrodynamic Atomization in the Cone-Jet Mode Physical Modeling of the Liquid Cone and Jet. J. Aerosol Sci., 30:7, pp.823–849.10.1016/S0021-8502(99)00033-6 ↗
56. Hartman, R. P. A., Brunner, D. J., Camelot, D. M. A., Marijnissen, J. C. M. and Scarlett, B. (2000): Jet Break-Up in Electrohydrodynamic Atomization in the Cone-Jet Mode. J. Aerosol Sci., 31(1), pp.65–95.10.1016/S0021-8502(99)00034-8 ↗
57. Hayati, I., Bailey, A. and Tadros, Th.F. (1987b): Investigations into the mechanism of electrohydrodynamic spraying of liquids. II. Mechanism of stable jet formation and electrical forces acting on a liquid cone Journal of Colloid and Interface Science, 117 (1), pp.222–230.10.1016/0021-9797(87)90186-X ↗
58. Hayati, I., Bailey, A.I. and Tadros, Th.F. (1987a): Investigations into the mechanisms of electrohydrodynamic spraying of liquids. I. Effect of electric field and the environment on pendant drops and factors affecting the formation of stable jets and atomization Journal of Colloid and Interface Science, 117 (1), pp.205–221.10.1016/0021-9797(87)90185-8 ↗
59. Heijerman, H, Westerman, E., Conway, S., Touw, D. and Doring, G. (2009): Inhaled medication and inhalation devices for lung disease in patients with cystic fibrosis: A European Concensus, Journal of Cystic Fibrosis, 8, pp.295–315.10.1016/j.jcf.2009.04.005 ↗
60. Hickey, A. J., (Editor), (1996): “Inhalation Aerosols: Physical and Biological Basis for Therapy”, Informa Healthcare.
61. Hinds, W. C. (1999): “Aerosol Technology 2nd ed.”, John Wiley & Sons, Inc., New York.
62. Hogan Jr. C.J., Yun, K.M., Chen, D.-R., Lenggoro, I.W., Biswas, P. and Okuyama, K. (2007): Controlled size polymer particle production via electrohydrodynamic atomization, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 311 (1–3), pp.67–76.10.1016/j.colsurfa.2007.05.072 ↗
63. Hong, Y., Li, Y., Yin, Y., Li, D. and Zou, G. (2008): Electrohydrodynamic atomization of quasi-monodisperse drug-loaded spherical/wrinkled microparticles, Journal of Aerosol Sci., 39 (6), pp.525–536.10.1016/j.jaerosci.2008.02.004 ↗
64. Hull, P., Hutchison, J., Salata, O. and Dobson, P. (1997): Synthesis of Nanometerscale Silver Crystallites via A Room-Temperature Electrostatic Spraying Process. Advanced Materials 9:5, pp.413–417.10.1002/adma.19970090511 ↗
65. Ijsebaert, J.C., Geerse, K.B., Marijnissen, J.C.M., Lammers, J.-W.J. and Zanen, P. (2001): Electro-hydrodynamic atomization of drug solutions for inhalation purposes, Journal of Applied Physiology, 91(6), pp.2735–2741.10.1152/jappl.2001.91.6.2735 ↗
66. Jaworek, A. (2008): Electrostatic micro- and nanoencapsulation and electroemulsification: A brief review Journal of Microencapsulation, 25 (7), pp.443–468.10.1080/02652040802049109 ↗
67. Jaworek, A. (2007): Micro- and nanoparticle production by electrospraying, Powder Technology, 176 (1), pp.18–35.10.1016/j.powtec.2007.01.035 ↗
68. Jaworek, A. and Krupa, A. (1999): Classification of the modes of EHD spraying, J. Aerosol Sci., 30 (7), pp.873–893.10.1016/S0021-8502(98)00787-3 ↗
69. Jaworek, A. and Sobczyk, A.T. (2008): Electrospraying route to nanotechnology: An overview Journal of Electrostatics, 66 (3–4), pp.197–219.10.1016/j.elstat.2007.10.001 ↗
70. Juraschek, R. and Röllgen, F.W. (1998): Pulsation phenomena during electrospray ionization, International Journal of Mass Spectrometry, 177 (1), pp.1–15.10.1016/S1387-3806(98)14025-3 ↗
71. Kebarle, P and Tang, L. (1993): From ions in solution to ions in the gas-phase: The mechanism of electrospray mass-spectrometry. Anal. Chem., 65, pp.972–986.10.1021/ac00070a001 ↗
72. Kim, K., Kim, W., Hwa Yun, S., Hyun Lee, J., Kim, S. and Lee, B.U. (2008): Use of an electrospray for the generation of bacterial bioaerosols, J. Aerosol Sci., 39 (4), pp.365–372.10.1016/j.jaerosci.2007.12.006 ↗
73. Kim, K., Lee, B.U., Hwang, G.B., Lee, J.H. and Kim, S. (2010): Drop-on-demand patterning of bacterial cells using pulsed jet electrospraying, Analytical Chemistry, 82 (5), pp.2109–2112.10.1021/ac9027966 ↗
74. Kim, W. and Kim, S.S. (2010): Multishell encapsulation using a triple coaxial electrospray system, Analytical Chemistry, 82 (11), pp.4644–4647.10.1021/ac100278c ↗
75. Kleinstreuer, C., Zhang, Z. and Donohue, J.F. (2008): Targeted drug-aerosol delivery in the human respiratory system, Annual Review of Biomedical Engineering, 10, pp.195–220.10.1146/annurev.bioeng.10.061807.160544 ↗
76. Kozhenkov, V.I. and Fuks, N.A. (1976): Electrohydrodynamic atomization of liquids, Russian Chem. Rev. 45, pp.1179–1184.10.1070/RC1976v045n12ABEH002771 ↗
77. Lallave, M., Bedia, J., Ruiz-Rosas, R., Rodriguez-Mirasol, J., Cordero, T., Otero, J.C., Marquez, M. and Loscertales, I.G. (2007): Filled and hollow carbon nanofibers by coaxial electrospinning of Alcell lignin without binder polymers, Advanced Materials, 19 (23), pp.4292–4296.10.1002/adma.200700963 ↗
78. Lastow, O. (2007): “Numerical and Experimental Study of Electrohydrodynamic Atomisation of Aqueous Liquids”, PhD thesis, Brunel University.
79. Leeuwenburgh, S.C.G, (2006b): “Electrosprayed calcium phosphate coatings for biomedical purposes”, PhD Thesis, Radboud University Nijmegen.10.1515/BIOMAT.2007.8.1.16 ↗
80. Leeuwenburgh, S.C.G., Heine, M.C., Wolke, J.G.C., Pratsinis, S.E., Schoonman, J. and Jansen, J.A. (2006a): Morphology of calcium phosphate coatings for biomedical applications deposited using Electrostatic Spray Deposition Thin Solid Films, 503 (1–2), pp.69–78.10.1016/j.tsf.2005.11.116 ↗
81. Lefebvre, A.H. (1989): “Atomization and Sprays”, Hemisphere Publishing Company.10.1201/9781482227857 ↗
82. Lenggoro, I., Okuyama, K., de la Mora, J. and Tohge, N. (2000): Preparation of ZnS Nanoparticles by Electrospray Pyrolysis, J. Aerosol Sci., 31(1), pp.121–136.10.1016/S0021-8502(99)00534-0 ↗
83. Loscertales, I.G., Barrero, A., Guerrero, I., Cortijo, R., Marquez, M. and Gañán-Calvo, A.M. (2002): Micro/nano encapsulation via electrified coaxial liquid jets, Science, 295 (5560), pp.1695–1698.10.1126/science.1067595 ↗
84. Mao, S., Lu, G., Yu, K., and Chen, J. (2010): Protein Viability on Au Nanoparticles during an Electrospray and Electrostatic-Force-Directed Assembly Process, Journal of Nanomaterials, vol. 2010, Article ID 196393, 6 pages,. doi:10.1155/2010/196393.10.1155/2010/196393 ↗
85. Marijnissen, J.C.M., Yurteri, C.U., van Erven, J. and Ciach, T. (2010): Medicine Nanoparticle production by EHDA in “Nanoparticles in medicine and environment Inhalation and health effects”, Marijnissen, J.C.; Gradon, Leon (Eds.), Springer.10.1007/978-90-481-2632-3_3 ↗
86. Meesters, G., Vercoulen, P. H. W., Marijnissen, J. C. M. and Scarlett, B. (1992): Generation of Micron-Sized Droplets from the Taylor Cone, J. Aerosol Sci., 23:(1), pp.37–49.10.1016/0021-8502(92)90316-N ↗
87. Meesters, G.M.H. (1992): “Mechanisms of droplet formation”, PhD thesis, Delft University of Technology.
88. Meng, C.K., Mann, M. and Fenn, J.B. (1988): Of protons or proteins - “A beam’s a beam for a’ that.” (O.S. Burns), Zeitschrift für Physik D Atoms, Molecules and Clusters, 10 (2–3), pp.361–368.10.1007/BF01384871 ↗
89. Michelson, D. (1990): “Electrostatic atomization”, Bristol, England; New York, NY, USA, A. Hilger.
90. Mitragotri, S. (2009a): In drug delivery, shape does matter, Pharmaceutical Research, 26 (1), pp.232–234.10.1007/s11095-008-9740-y ↗
91. Mitragotri, S. and Lahann, J. (2009b): Physical approaches to biomaterial design, Nature Materials, 8 (1), pp.15–23.10.1038/nmat2344 ↗
92. Moerman, R., Frank, J., Marijnissen, J.C.M., Schalkhammer, T.G.M. and Van Dedem, G.W.K. (2001): Miniaturized electrospraying as a technique for the production of microarrays of reproducible micrometer-sized protein spots, Analytical Chemistry, 73(10), pp.2183–2189.10.1021/ac001041g ↗
93. Muro, S., Garnacho, C., Champion, J.A., Leferovich, J., Gajewski, C., Schuchman, E.H., Mitragotri, S. and Muzykantov, V.R. (2008): Control of endothelial targeting and intracellular delivery of therapeutic enzymes by modulating the size and shape of ICAM-1-targeted carriers, Molecular Therapy, 16 (8), pp.1450–1458.10.1038/mt.2008.127 ↗
94. Nakaso, K., Han, B., Ahn, K.H., Choi, M. and Okuyama, K. (2003): Synthesis of non-agglomerated nanoparticles by an electrospray assisted chemical vapor deposition (ES-CVD) method, J. Aerosol Sci., 34 (7), pp.869–881.10.1016/S0021-8502(03)00053-3 ↗
95. Noakes, T. J., Pavey, I. D. Bray, D. and Rowe, R.C. (1989): “Apparatus for producing a spray of droplets of a liquid”, U.S. patent 4829996.
96. Noakes, T.J., Prendergast, M.J. and Green, M.L., (2000): “Electrostatic Spraying”, US patent 6079634.
97. Park, C.H., Kim, K.-H., Lee, J.-C. and Lee, J. (2008): In-situ nanofabrication via electrohydrodynamic jetting of countercharged nozzles, Polymer Bulletin, 61 (4), pp.521–528.10.1007/s00289-008-0976-9 ↗
98. Rosell-Llompart, J., Fernández de la and Mora, J. (1994): Generation of monodisperse droplets 0.3 to 4 μ m in diameter from electrified cone-jets of highly conducting and viscous liquids, J. Aerosol Sci., 25 (6), pp.1093–1119.10.1016/0021-8502(94)90204-6 ↗
99. Rulison, A. J. and Flagan, R. C. (1994): Synthesis of Yttria Powders by Electrospray Pyrolysis. J. American Ceramic Society 77, pp.3244–3250.10.1111/j.1151-2916.1994.tb04577.x ↗
100. Schacter, D.M., Shissias, R.S., Yurteri, C.U. and Escallon, E.C. (2007): “Improved process for coating a medical device”, US patent application 2007/0077435.