Role of Powder Properties and Flowability in Polymer Selective Laser Sintering—A Review
Source abstract
Abstract
Polymer selective laser sintering (SLS) is an additive manufacturing technology that involves the melting of a selected area of particles on the powder bed. A 3D component is then printed using layer-by-layer sintering of the powder bed. SLS is considered one of the most promising technologies applicable to a variety of applications, particularly for manufacturing customized design products with high geometric complexity, such as patient-specific designed implants, surgical tools. Currently, only a small number of polymers are available that are suitable for SLS due to the complex multiple physical phenomena involved. Therefore, it is critical to develop new materials in order to fully realize the potential of SLS technology for manufacturing value-added customized products. For a given material, the quality of powder spreading in SLS plays a key role in printing performance and is a precondition for new material development. The aim of this review is to (1) present flowability characterization methods suitable for SLS, (2) examine the influence of powder properties and flowability on laser–material interaction and the quality of the final part, and (3) discuss the methods adopted in the literature to improve the quality of powder spreading.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Center for Particulate and Surfactant Systems (CPaSS), University of Florida, USA
Funding
Directorate for Engineering
References (100+)
Show source-provided references
1. Amado A., Schmid M., Levy G., Wegener K., Advances in SLS powder characterization, 22nd Annual International Solid Freeform Fabrication Symposium, (2011) 438–452. DOI:10.26153/tsw/15306
2. Amado A., Schmid M., Wegener K., Flowability of SLS powders at elevated temperature, Swiss Institute of Technology, ETH Zürich, 2014. DOI:10.3929/ethz-a-010057815
3. Amado Becker A.F., Characterization and prediction of SLS processability of polymer powders with respect to powder flow and part warpage, Doctoral Thesis, ETH-Zürich, 2016. DOI:10.3929/ethz-a-010657585
4. Arai S., Tsunoda S., Kawamura R., Kuboyama K., Ougizawa T., Comparison of crystallization characteristics and mechanical properties of poly(butylene terephthalate) processed by laser sintering and injection molding, Materials & Design, 113 (2017) 214–222. DOI:10.1016/j.matdes.2016.10.02810.1016/j.matdes.2016.10.028 ↗
5. Arai S., Tsunoda S., Yamaguchi A., Ougizawa T., Effects of short-glass-fiber content on material and part properties of poly(butylene terephthalate) processed by selective laser sintering, Additive Manufacturing, 21 (2018) 683–693. DOI:10.1016/j.addma.2018.04.01910.1016/j.addma.2018.04.019 ↗
6. Arai S., Tsunoda S., Yamaguchi A., Ougizawa T., Characterization of flame-retardant poly(butylene terephthalate) processed by laser sintering, Optics & Laser Technology, 117 (2019) 94–104. DOI:10.1016/j.optlastec.2019.04.00610.1016/j.optlastec.2019.04.006 ↗
7. ASTM D6393, Standard Test Method for Bulk Solids Characterization by Carr Indices, ASTM International, 2021. DOI:10.1520/d6393_d6393m-2110.1520/D6393_D6393M-21 ↗
8. Beitz S., Uerlich R., Bokelmann T., Diener A., Vietor T., Kwade A., Influence of powder deposition on powder bed and specimen properties, Materials, 12 (2019) 297. DOI:10.3390/ma1202029710.3390/ma12020297 ↗
9. Benedetti L., Brulé B., Decreamer N., Evans K.E., Ghita O., Shrinkage behaviour of semi-crystalline polymers in laser sintering: PEKK and PA12, Materials & Design, 181 (2019) 107906. DOI:10.1016/j.matdes.2019.10790610.1016/j.matdes.2019.107906 ↗
10. Berretta S., Evans K.E., Ghita O.R., Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties, Materials and Design, 105 (2016) 301–314. DOI:10.1016/j.matdes.2016.04.09710.1016/j.matdes.2016.04.097 ↗
11. Berretta S., Ghita O., Evans K.E., Morphology of polymeric powders in Laser Sintering (LS): from Polyamide to new PEEK powders, European Polymer Journal, 59 (2014) 218–229. DOI:10.1016/j.eurpolymj.2014.08.00410.1016/j.eurpolymj.2014.08.004 ↗
12. Bierwisch C., Mohseni-Mofidi S., Dietemann B., Grünewald M., Rudloff J., Lang M., Universal process diagrams for laser sintering of polymers, Materials & Design, 199 (2021) 109432. DOI:10.1016/j.matdes.2020.10943210.1016/j.matdes.2020.109432 ↗
13. Chatham C.A., Long T.E., Williams C.B., Powder bed fusion of poly (phenylene sulfide) at bed temperatures significantly below melting, Additive Manufacturing, 28 (2019) 506–516. DOI:10.1016/j.addma.2019.05.02510.1016/j.addma.2019.05.025 ↗
14. Chen H., Wei Q., Zhang Y., Chen F., Shi Y., Yan W., Powder-spreading mechanisms in powder-bed-based additive manufacturing: experiments and computational modeling, Acta Materialia, 179 (2019) 158–171. DOI:10.1016/j.actamat.2019.08.03010.1016/j.actamat.2019.08.030 ↗
15. Dadbakhsh S., Verbelen L., Vandeputte T., Strobbe D., Van Puyvelde P., Kruth J.P., Effect of powder size and shape on the SLS processability and mechanical properties of a TPU elastomer, Physics Procedia, 83 (2016) 971–980. DOI:10.1016/j.phpro.2016.08.10210.1016/j.phpro.2016.08.102 ↗
16. Dadbakhsh S., Verbelen L., Verkinderen O., Strobbe D., Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts, European Polymer Journal, 92 (2017) 250–262. DOI:10.1016/j.eurpolymj.2017.05.01410.1016/j.eurpolymj.2017.05.014 ↗
17. Dechet M.A., Demina A., Römling L., Gómez Bonilla J.S., Lanyi F.J., Schubert D.W., Bück A., Peukert W., Schmidt J., Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers, Additive Manufacturing, 32 (2020) 100966. DOI:10.1016/j.addma.2019.10096610.1016/j.addma.2019.100966 ↗
18. Dooher T., Archer E., Walls T., McIlhagger A., Dixon D., Ageing of laser sintered glass-filled Polyamide 12 (PA12) parts at elevated temperature and humidity, Polymers and Polymer Composites, 12 (2021) 1–11. DOI:10.1177/0967391121102712710.1177/09673911211027127 ↗
19. Dotchev K., Yusoff W., Recycling of polyamide 12 based powders in the laser sintering process, Rapid Prototyping Journal, 15 (2009) 192–203. DOI:10.1108/1355254091096029910.1108/13552540910960299 ↗
20. Drummer D., Drexler M., Wudy K., Density of laser molten polymer parts as function of powder coating process during additive manufacturing, Procedia Engineering, 102 (2015) 1908–1917. DOI:10.1016/j.proeng.2015.01.33110.1016/j.proeng.2015.01.331 ↗
21. Drummer D., Greiner S., Zhao M., Wudy K., A novel approach for understanding laser sintering of polymers, Additive Manufacturing, 27 (2019) 379–388. DOI:10.1016/j.addma.2019.03.01210.1016/j.addma.2019.03.012 ↗
22. Drummer D., Rietzel D., Kühnlein F., Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering, Physics Procedia, 5 (2010) 533–542. DOI:10.1016/j.phpro.2010.08.08110.1016/j.phpro.2010.08.081 ↗
23. Freeman R., Measuring the flow properties of consolidated, conditioned and aerated powders—a comparative study using a powder rheometer and a rotational shear cell, Powder Technology, 174 (2007) 25–33. DOI:10.1016/j.powtec.2006.10.01610.1016/j.powtec.2006.10.016 ↗
24. Geldart D., Abdullah E.C., Hassanpour A., Nwoke L.C., Wouters I., Characterization of powder flowability using measurement of angle of repose, China Particuology, 4 (2006) 104–107. DOI:10.1016/s1672-2515(07)60247-410.1016/S1672-2515(07)60247-4 ↗
25. German R.M., Particle Packing Characteristics, Metal Powder Industry, 1989, ISBN: 9780918404831. DOI:10.1016/0032-5910(90)80071-610.1016/0032-5910(90)80071-6 ↗
26. Gong X., Cheng B., Price S., Chou K., Powder-bed electron-beam-melting additive manufacturing: powder characterization, process simulation and metrology, ASME District Early Career Technical Conference, ASME Early Career Technical Journal, (2013) 59–66.
27. Goodridge R.D., Hague R.J.M., Tuck C.J., Effect of long-term ageing on the tensile properties of a polyamide 12 laser sintering material, Polymer Testing, 29 (2010) 483–493. DOI:10.1016/j.polymertesting.2010.02.00910.1016/j.polymertesting.2010.02.009 ↗
28. Greiner S., Wudy K., Wörz A., Drummer D., Thermographic investigation of laser-induced temperature fields in selective laser beam melting of polymers, Optics and Laser Technology, 109 (2019) 569–576. DOI:10.1016/j.optlastec.2018.08.01010.1016/j.optlastec.2018.08.010 ↗
29. Gulotty R., Castellino M., Jagdale P., Tagliaferro A., Balandin A.A., Effects of functionalization on thermal properties of single-wall and multi-wall carbon nanotube-polymer nanocomposites, ACS Nano, 7 (2013) 5114–5121. DOI:10.1021/nn400726g10.1021/nn400726g ↗
30. Haeri S., Wang Y., Ghita O., Sun J., Discrete element simulation and experimental study of powder spreading process in additive manufacturing, Powder Technology, 306 (2017) 45–54. DOI:10.1016/j.powtec.2016.11.00210.1016/j.powtec.2016.11.002 ↗
31. Haworth B., Hopkinson N., Hitt D., Zhong X., Shear viscosity measurements on Polyamide-12 polymers for laser sintering, Rapid Prototyping Journal, 19 (2013) 28–36. DOI:10.1108/1355254131129270910.1108/13552541311292709 ↗
32. Hesse N., Dechet M.A., Bonilla J.S.G., Lübbert C., Roth S., Bück A., Schmidt J., Peukert W., Analysis of tribo-charging during powder spreading in selective laser sintering: assessment of polyamide 12 powder ageing effects on charging behavior, Polymers, 11 (2019) 609. DOI:10.3390/polym1104060910.3390/polym11040609 ↗
33. Hettiarachchi C., Mampearachchi W.K., Effect of surface texture, size ratio and large particle volume fraction on packing density of binary spherical mixtures, Granular Matter, 22 (2020) 1–13. DOI:10.1007/s10035-019-0978-310.1007/s10035-019-0978-3 ↗
34. ISO/ASTM 52900:2021, Additive manufacturing—General principles— Fundamentals and vocabulary, 2021. accessed 20042023
35. Ituarte I.F., Wiikinkoski O., Jansson A., Additive manufacturing of polypropylene: a screening design of experiment using laser-based powder bed fusion, Polymers, 10 (2018) 1293. DOI:10.3390/polym1012129310.3390/polym10121293 ↗
36. Kleijnen R.G., Schmid M., Wegener K., Nucleation and impact modification of polypropylene laser sintered parts, AIP Conference Proceedings, 1779 (2016) 100004-1–5. DOI:10.1063/1.496557210.1063/1.4965572 ↗
37. Kleijnen R.G., Schmid M., Wegener K., Impact of flow aid on the flowability and coalescence of polymer laser sintering powder, 2019 International Solid Freeform Fabrication Symposium, (2019) 806–817. DOI:10.26153/tsw/17317
38. Kleijnen R.G., Sesseg J.P.W., Schmid M., Wegener K., Insights into the development of a short-fiber reinforced polypropylene for laser sintering, AIP Conference Proceedings, 1914 (2017) 190002. DOI:10.1063/1.501679110.1063/1.5016791 ↗
39. Krantz M., Zhang H., Zhu J., Characterization of powder flow: static and dynamic testing, Powder Technology, 194 (2009) 239–245. DOI:10.1016/j.powtec.2009.05.00110.1016/j.powtec.2009.05.001 ↗
40. Kruth J.P., Leu M.C., Nakagawa T., Progress in additive manufacturing and rapid prototyping, CIRP Annals—Manufacturing Technology, 47 (1998) 525–540. DOI:10.1016/s0007-8506(07)63240-510.1016/S0007-8506(07)63240-5 ↗
41. Kruth J.P., Levy G., Klocke F., Childs T.H.C., Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Annals—Manufacturing Technology, 56 (2007) 730–759. DOI:10.1016/j.cirp.2007.10.00410.1016/j.cirp.2007.10.004 ↗
42. Kuehnlein F., Drummer D., Rietzel D., Seefried A., Degradation behavior and material properties of PA12-plastic powders processed by powder based additive manufacturing technologies, Annals of DAAAM and Proceedings of the International DAAAM Symposium, 21 (2010) 1547–1548. ISBN 9783901509735.
43. Laumer T., Stichel T., Nagulin K., Schmidt M., Optical analysis of polymer powder materials for Selective Laser Sintering, Polymer Testing, 56 (2016a) 207–213. DOI:10.1016/j.polymertesting.2016.10.01010.1016/j.polymertesting.2016.10.010 ↗
44. Laumer T., Stichel T., Raths M., Schmidt M., Analysis of the influence of different flowability on part characteristics regarding the simultaneous laser beam melting of polymers, Physics Procedia, 83 (2016b) 937–946. DOI:10.1016/j.phpro.2016.08.09810.1016/j.phpro.2016.08.098 ↗
45. Lexow M.M., Drummer D., New materials for SLS: the use of antistatic and flow agents, Journal of Powder Technology, 2016 (2016) 4101089. DOI:10.1155/2016/410108910.1155/2016/4101089 ↗
46. Ligon S.C., Liska R., Stampfl J., Gurr M., Mülhaupt R., Polymers for 3D printing and customized additive manufacturing, Chemical Reviews, 117 (2017) 10212–10290. DOI:10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
47. Lupone F., Padovano E., Casamento F., Badini C., Process phenomena and material properties in selective laser sintering of polymers: a review, Materials 2022, 15 (2021) 183. DOI:10.3390/ma1501018310.3390/ma15010183 ↗
48. McGeary R.K., Mechanical packing of spherical particles, Journal of the American Ceramic Society, 44 (1961) 513–522. DOI:10.1111/j.1151-2916.1961.tb13716.x10.1111/j.1151-2916.1961.tb13716.x ↗
49. Mielicki C., Gronhoff B., Wortberg J., Effects of laser sintering processing time and temperature on changes in polyamide 12 powder particle size, shape and distribution, AIP Conference Proceedings, 1593 (2015) 728–731. DOI:10.1063/1.487388010.1063/1.4873880 ↗
50. Mielicki C., Wegner A., Gronhoff B., Wortberg J., Witt G., Prediction of PA12 melt viscosity in laser sintering by a time and temperature dependent rheological model, RTeJournal, 32 (2012). accessed 20012023.
51. Montón Zarazaga A., Abdelmoula M., Küçüktürk G., Maury F., Ferrato M., Grossin D., Process parameters investigation for direct powder bed selective laser processing of silicon carbide parts, Progress in Additive Manufacturing, 7 (2022) 1307–1322. DOI:10.1007/s40964-022-00305-710.1007/s40964-022-00305-7 ↗
52. Mousah A., Effects of filler content and coupling agents on the mechanical properties and geometrical accuracy of selective laser sintered parts in glass bead-filled polyamide 12 composites, Thesis (Ph.D.), Cardiff University, 2011, pp. 227–231. https://orca.cardiff.ac.uk/id/eprint/11094
53. Mwania F.M., Maringa M., Van Der Walt J.G., A review of the techniques used to characterize laser sintering of polymeric powders for use and re-use in additive manufacturing, Manufacturing Review, 8 (2021) 1–17. DOI:10.1051/mfreview/202101210.1051/mfreview/2021012 ↗
54. Myers T.L., Brauer C.S., Su Y.-F., Blake T.A., Tonkyn R.G., Ertel A.B., Johnson T.J., Richardson R.L., Quantitative reflectance spectra of solid powders as a function of particle size, Applied Optics, 54 (2015) 4863. DOI:10.1364/ao.54.00486310.1364/AO.54.004863 ↗
55. Niino T., Sato K., Effect of powder compaction in plastic laser sintering fabrication, 2009 International Solid Freeform Fabrication Symposium, (2009) 193–205. DOI:10.26153/tsw/15100
56. Osmanlic F., Wudy K., Laumer T., Schmidt M., Drummer D., Körner C., Modeling of laser beam absorption in a polymer powder bed, Polymers, 10 (2018) 1–11. DOI:10.3390/polym1007078410.3390/polym10070784 ↗
57. Rescaglio A., Schockmel J., Vandewalle N., Lumay G., Combined effect of moisture and electrostatic charges on powder flow, EPJ Web of Conferences, 140 (2017) 13009. DOI:10.1051/epjconf/20171401300910.1051/epjconf/201714013009 ↗
58. Ruggi D., Barrès C., Charmeau J.Y., Fulchiron R., Barletta D., Poletto M., A quantitative approach to assess high temperature flow properties of a PA 12 powder for laser sintering, Additive Manufacturing, 33 (2020a) 101143. DOI:10.1016/j.addma.2020.10114310.1016/j.addma.2020.101143 ↗
59. Ruggi D., Lupo M., Sofia D., Barrès C., Barletta D., Poletto M., Flow properties of polymeric powders for selective laser sintering, Powder Technology, 370 (2020b) 288–297. DOI:10.1016/j.powtec.2020.05.06910.1016/j.powtec.2020.05.069 ↗
60. Sachs M., Schmidt J., Toni F., Blümel C., Winzer B., Peukert W., Wirth K.E., Rounding of irregular polymer particles in a downer reactor, Procedia Engineering, 102 (2015) 542–549. DOI:10.1016/j.proeng.2015.01.11910.1016/j.proeng.2015.01.119 ↗
61. Sassaman D., Phillips T., Milroy C., Ide M., Beaman J., A method for predicting powder flowability for selective laser sintering, JOM, 74 (2022) 1102–1110. DOI:10.1007/s11837-021-05050-w10.1007/s11837-021-05050-w ↗
62. Schmid M., Amado F., Levy G., Wegener K., Flowability of powders for selective laser sintering (SLS) investigated by round robin test, in: High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping, 1st ed., CRC Press, 2013, pp. 95–99, ISBN: 9781138001374. DOI:10.3929/ethz-a-01005780610.1201/b15961-19 ↗
63. Schmid M., Amado A., Wegener K., Materials perspective of polymers for additive manufacturing with selective laser sintering, Journal of Materials Research, 29 (2014) 1824–1832. DOI:10.1557/jmr.2014.13810.1557/jmr.2014.138 ↗
64. Schmid M., Amado A., Wegener K., Polymer powders for selective laser sintering (SLS), AIP Conference Proceedings, 1664 (2015) 160009-1–5. DOI:10.1063/1.491851610.1063/1.4918516 ↗
65. Schmid M., Kleijnen R., Vetterli M., Wegener K., Influence of the origin of polyamide 12 powder on the laser sintering process and laser sintered parts, Applied Sciences (Switzerland), 7 (2017) 462. DOI:10.3390/app705046210.3390/app7050462 ↗
66. Schmidt J., Dechet M.A., Gómez Bonilla J.S., Hesse N., Bück A., Peukert W., Characterization of polymer powders for selective laser sintering, 2019 International Solid Freeform Fabrication Symposium, (2019) 779–789. DOI:10.26153/tsw/17314
67. Schmidt J., Sachs M., Blümel C., Winzer B., Toni F., Wirth K.E., Peukert W., A novel process route for the production of spherical LBM polymer powders with small size and good flowability, Powder Technology, 261 (2014) 78–86. DOI:10.1016/j.powtec.2014.04.00310.1016/j.powtec.2014.04.003 ↗
68. Schmidt J., Sachs M., Fanselow S., Zhao M., Romeis S., Drummer D., Wirth K.E., Peukert W., Optimized polybutylene terephthalate powders for selective laser beam melting, Chemical Engineering Science, 156 (2016) 1–10. DOI:10.1016/j.ces.2016.09.00910.1016/j.ces.2016.09.009 ↗
69. Schwedes J., Review on testers for measuring flow properties of bulk solids, Granular Matter, 5 (2003) 1–43. DOI:10.1007/s10035-002-0124-410.1007/s10035-002-0124-4 ↗
70. Sillani F., de Gasparo F., Schmid M., Wegener K., Influence of packing density and fillers on thermal conductivity of polymer powders for additive manufacturing, International Journal of Advanced Manufacturing Technology, 117 (2021) 2049–2058. DOI:10.1007/s00170-021-07117-z10.1007/s00170-021-07117-z ↗
71. Sivadas B.O., Ashcroft I., Khlobystov A.N., Goodridge R.D., Laser sintering of polymer nanocomposites, Advanced Industrial and Engineering Polymer Research, 4 (2021) 277–300. DOI:10.1016/j.aiepr.2021.07.00310.1016/j.aiepr.2021.07.003 ↗
72. Soe S.P., Quantitative analysis on SLS part curling using EOS P700 machine, Journal of Materials Processing Technology, 212 (2012) 2433–2442. DOI:10.1016/j.jmatprotec.2012.06.01210.1016/j.jmatprotec.2012.06.012 ↗
73. Spierings A.B., Voegtlin M., Bauer T., Wegener K., Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing, Progress in Additive Manufacturing, 1 (2016) 9–20. DOI:10.1007/s40964-015-0001-410.1007/s40964-015-0001-4 ↗
74. Stansbury J.W., Idacavage M.J., 3D printing with polymers: challenges among expanding options and opportunities, Dental Materials, 32 (2016) 54–64. DOI:10.1016/j.dental.2015.09.01810.1016/j.dental.2015.09.018 ↗
75. Starr T.L., Gornet T.J., Usher J.S., The effect of process conditions on mechanical properties of laser-sintered nylon, Rapid Prototyping Journal, 17 (2011) 418–423. DOI:10.1108/1355254111118414310.1108/13552541111184143 ↗
76. Tan L.J., Zhu W., Sagar K., Zhou K., Comparative study on the selective laser sintering of polypropylene homopolymer and copolymer: processability, crystallization kinetics, crystal phases and mechanical properties, Additive Manufacturing, 37 (2021) 101610. DOI:10.1016/j.addma.2020.10161010.1016/j.addma.2020.101610 ↗
77. Tan Y.-Q., Zheng J.-H., Gao W., Jiang S.-Q., Feng Yuntian, Zheng J., Gao Á.W., Jiang Á.S., Feng Y., The effect of powder flowability in the selective laser sintering process, Proceedings of the 7th International Conference on Discrete Element Methods, 188 (2017) 629–636. DOI:10.1007/978-981-10-1926-5_6510.1007/978-981-10-1926-5_65 ↗
78. Tanoue K.I., Ema A., Masuda H., Effect of material transfer and work hardening of metal surface on the current generated by impact of particles, Journal of Chemical Engineering of Japan, 32 (1999) 544–548. DOI:10.1252/jcej.32.54410.1252/jcej.32.544 ↗
79. Tolochko N.K., Laoui T., Khlopkov Y.V., Mozzharov S.E., Titov V.I., Ignatiev M.B., Absorptance of powder materials suitable for laser sintering, Rapid Prototyping Journal, 6 (2000) 155–160. DOI:10.1108/1355254001033702910.1108/13552540010337029 ↗
80. Van den Eynde M., Verbelen L., Van Puyvelde P., Assessing polymer powder flow for the application of laser sintering, Powder Technology, 286 (2015) 151–155. DOI:10.1016/j.powtec.2015.08.00410.1016/j.powtec.2015.08.004 ↗
81. Van den Eynde M., Verbelen L., Van Puyvelde P., Influence of temperature on the flowability of polymer powders in laser sintering, AIP Conference Proceedings, 1914 (2017) 190007-1–5. DOI:10.1063/1.501679610.1063/1.5016796 ↗
82. Vasquez G.M., Majewski C.E., Haworth B., Hopkinson N., A targeted material selection process for polymers in laser sintering, Additive Manufacturing, 1 (2014) 127–138. DOI:10.1016/j.addma.2014.09.00310.1016/j.addma.2014.09.003 ↗
83. Vasquez M., Haworth B., Hopkinson N., Optimum sintering region for laser sintered Nylon-12, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (2011) 2240–2248. DOI:10.1177/095440541141499410.1177/0954405411414994 ↗
84. Verbelen L., Dadbakhsh S., Van den Eynde M., Kruth J.P., Goderis B., Van Puyvelde P., Characterization of polyamide powders for determination of laser sintering processability, European Polymer Journal, 75 (2016) 163–174. DOI:10.1016/j.eurpolymj.2015.12.01410.1016/j.eurpolymj.2015.12.014 ↗
85. Verbelen L., Dadbakhsh S., Van den Eynde M., Strobbe D., Kruth J.P., Goderis B., Van Puyvelde P., Analysis of the material properties involved in laser sintering of thermoplastic polyurethane, Additive Manufacturing, 15 (2017) 12–19. DOI:10.1016/j.addma.2017.03.00110.1016/j.addma.2017.03.001 ↗
86. Vock S., Klöden B., Kirchner A., Weißgärber T., Kieback B., Powders for powder bed fusion: a review, Progress in Additive Manufacturing, 4 (2019a) 383–397. DOI:10.1007/s40964-019-00078-610.1007/s40964-019-00078-6 ↗
87. Vock S., Klöden B., Kirchner A., Weißgärber T., Kieback B., Powders for powder bed fusion: a review, Progress in Additive Manufacturing, 4 (2019b) 383–397. DOI:10.1007/s40964-019-00078-610.1007/s40964-019-00078-6 ↗
88. Wegner A., New polymer materials for the laser sintering process: polypropylene and others, Physics Procedia, 83 (2016) 1003–1012. DOI:10.1016/j.phpro.2016.08.10510.1016/j.phpro.2016.08.105 ↗
89. Wegner A., Mielicki C., Grimm T., Gronhoff B., Witt G., Wortberg J., Determination of robust material qualities and processing conditions for laser sintering of polyamide 12, Polymer Engineering and Science, 54 (2014) 1540–1554. DOI:10.1002/pen.2369610.1002/pen.23696 ↗
90. Wegner A., Ünlü T., Powder life cycle analyses for a new polypropylene laser sintering material, 2016 International Solid Freeform Fabrication Symposium, (2016) 834–846. https://hdl.handle.net/2152/89636
91. Williams J.M., Adewunmi A., Schek R.M., Flanagan C.L., Krebsbach P.H., Feinberg S.E., Hollister S.J., Das S., Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering, Biomaterials, 26 (2005) 4817–4827. DOI:10.1016/j.biomaterials.2004.11.05710.1016/j.biomaterials.2004.11.057 ↗
92. Wischeropp T.M., Emmelmann C., Brandt M., Pateras A., Measurement of actual powder layer height and packing density in a single layer in selective laser melting, Additive Manufacturing, 28 (2019) 176–183. DOI:10.1016/j.addma.2019.04.01910.1016/j.addma.2019.04.019 ↗
93. Wudy K., Drummer D., Drexler M., Characterization of polymer materials and powders for selective laser melting, AIP Conference Proceedings, 1593 (2015) 702–707. DOI:10.1063/1.487387510.1063/1.4873875 ↗
94. Wudy K., Drummer D., Kühnlein F, Drexler M., Influence of degradation behavior of polyamide 12 powders in laser sintering process on produced parts, AIP Conference Proceedings, 1593 (2014) 691–695. DOI:10.1063/1.487387310.1063/1.4873873 ↗
95. Xin L., Boutaous M., Xin S., Siginer D.A., Multiphysical modeling of the heating phase in the polymer powder bed fusion process, Additive Manufacturing, 18 (2017) 121–135. DOI:10.1016/j.addma.2017.10.00610.1016/j.addma.2017.10.006 ↗
96. Yan C., Shi Y., Hao L., Investigation into the differences in the selective laser sintering between amorphous and semi-crystalline polymers, International Polymer Processing, 26 (2011) 416–423. DOI:10.3139/217.245210.3139/217.2452 ↗
97. Yan C.Z., Shi Y.S., Yang J.S., Xu L., Preparation and selective laser sintering of nylon-12-coated aluminum powders, Journal of Composite Materials, 43 (2009) 1835–1851. DOI:10.1177/002199830934093210.1177/0021998309340932 ↗
98. Yan M., Tian X., Peng G., Cao Y., Li D., Hierarchically porous materials prepared by selective laser sintering, Materials and Design, 135 (2017) 62–68. DOI:10.1016/j.matdes.2017.09.01510.1016/j.matdes.2017.09.015 ↗
99. Yang F., Schnuerch A., Chen X., Quantitative influences of successive reuse on thermal decomposition, molecular evolution, and elemental composition of polyamide 12 residues in selective laser sintering, International Journal of Advanced Manufacturing Technology, 115 (2021) 3121–3138. DOI:10.1007/S00170-021-07368-W/TABLES/710.1007/s00170-021-07368-w ↗
100. Yuan S., Shen F., Bai J., Chua C.K., Wei J., Zhou K., 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization, Materials & Design, 120 (2017) 317–327. DOI:10.1016/J.MATDES.2017.01.09810.1016/j.matdes.2017.01.098 ↗