Show source-provided references
1. Alexander A.W., Chaudhuri B., Faqih A., Muzzio F.J., Davies C., Tomassone M.S., Avalanching flow of cohesive powders, Powder Technology, 164 (2006) 13–21. DOI: 10.1016/j.powtec.2006.01.017
10.1016/j.powtec.2006.01.017 ↗2. Alizadeh M., Hassanpour A., Pasha M., Ghadiri M., Bayly A., The effect of particle shape on predicted segregation in binary powder mixtures, Powder Technology, 319 (2017) 313–322. DOI: 10.1016/j.powtec.2017.06.059
10.1016/j.powtec.2017.06.059 ↗3. ASTM B213–17, Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel.
4. Bell A.T., Evaluation of Edinburgh Powder Tester, Proceedings of PARTEC, Nuremburg, Germany, 2007.
5. Berger N., Azéma E., Douce J. F., Radjai F., Scaling behaviour of cohesive granular flows, EPL (Europhysics Letters), 112 (2015) 64004. DOI: 10.1209/0295-5075/112/64004
10.1209/0295-5075/112/64004 ↗6. Berry R.J., Bradley M.S.A., McGregor R.G., Brookfield powder flow tester – Results of round robin tests with CRM-116 limestone powder, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (2014) 215–230. DOI: 10.1177/0954408914525387
10.1177/0954408914525387 ↗7. Bharadwaj R., Ketterhagen W.R., Hancock B.C., Discrete element simulation study of a Freeman powder rheometer, Chemical Engineering Science, 65 (2010) 5747–5765. DOI: 10.1016/j.ces.2010.04.002
10.1016/j.ces.2010.04.002 ↗8. Bruni G., Barletta D., Poletto M., Lettieri P., A rheological model for the flowability of aerated fine powders, Chemical Engineering Science, 62 (2007) 397–407. DOI: 10.1016/j.ces.2006.08.060
10.1016/j.ces.2006.08.060 ↗9. Bruni G., Colafigli A., Lettieri P., Elson T., Torque measurements in aerated powders using a mechanically stirred fluidized bed rheometer (msFBR), Chemical Engineering Research and Design, 83 (2005) 1311–1318. DOI: 10.1205/cherd.05092
10.1205/cherd.05092 ↗10. Calvert G., Curcic N., Redhead C., Ahmadian H., Owen C., Beckett D., Ghadiri M., A new environmental bulk powder caking tester, Powder Technology, 249 (2013) 323–329. DOI: 10.1016/j.powtec.2013.08.037
10.1016/j.powtec.2013.08.037 ↗11. Capece M., Ho R., Strong J., Gao P., Prediction of powder flow performance using a multi-component granular bond number, Powder Technology, 286 (2015) 561–571. DOI: 10.1016/j.powtec.2015.08.031
10.1016/j.powtec.2015.08.031 ↗12. Carrozza A., Characterization of powders to be used in a laser powder bed machine: Analysis of the critical parameters and relationship with powder flowability, MSc Thesis, Politecnico di Torino (2017).
13. Castellanos A., Valverde J.M., Quintanilla M.A.S., The Sevilla Powder Tester: A tool for characterizing the physical properties of fine cohesive powders at very small consolidations, KONA Powder and Particle Journal, 22 (2004) 66–81. DOI: 10.14356/kona.2004011
10.14356/kona.2004011 ↗14. Castellanos A., The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders, Advances in physics, 54 (2005) 263–376. DOI: 10.1080/17461390500402657
10.1080/17461390500402657 ↗15. Chialvo S., Sun J., Sundaresan S., Bridging the rheology of granular flows in three regimes, Physical Review E, 85 (2012) 021305. DOI: 10.1103/PhysRevE.85.021305
10.1103/PhysRevE.85.021305 ↗16. Cundall P.A., Formulation of a three-dimensional distinct element model—Part I. A scheme to detect and represent contacts in a system composed of many polyhedral blocks, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 25 (1988) 107–116. DOI: 10.1016/0148-9062(88)92293-0
10.1016/0148-9062(88)92293-0 ↗17. Derjaguin B.V., Muller V.M., Toporov Y.P., Effect of contact deformations on the adhesion of particles, Journal of Colloid and Interface Science, 53 (1975) 314–326. DOI: 10.1016/0021-9797(75)90018-1
10.1016/0021-9797(75)90018-1 ↗18. Desai P.S., Mehta A., Dougherty P.S.M., Higgs C.F., A rheometry based calibration of a first-order DEM model to generate virtual avatars of metal Additive Manufacturing (AM) powders, Powder Technology, 342 (2019) 441–456. DOI: 10.1016/j.powtec.2018.09.047
10.1016/j.powtec.2018.09.047 ↗19. Favier J.F., Abbaspour-Fard M.H., Kremmer M., Raji A.O., Shape representation of axi-symmetrical, non-spherical particles in discrete element simulation using multi-element model particles, Engineering Computations, 16 (1999) 467–480. DOI: 10.1108/02644409910271894
10.1108/02644409910271894 ↗20. Fischer R., Gondret P., Perrin B., Rabaud M., Dynamics of dry granular avalanches, Physical Review E, 78 (2008) 021302. DOI: 10.1103/PhysRevE.78.021302
10.1103/PhysRevE.78.021302 ↗21. Freeman R., Measuring the flow properties of consolidated, conditioned and aerated powders – a comparative study using a powder rheometer and a rotational shear cell, Powder Technology, 174 (2007) 25–33. DOI: 10.1016/j.powtec.2006.10.016
10.1016/j.powtec.2006.10.016 ↗22. Fu X., Huck D., Makein L., Armstrong B., Willen U., Freeman T., Effect of particle shape and size on flow properties of lactose powders, Particuology, 10 (2012) 203–208. DOI: 10.1016/j.partic.2011.11.003
10.1016/j.partic.2011.11.003 ↗23. Fulchini F., Zafar U., Hare C., Ghadiri M., Tantawy H., Ahmadian H., Poletto M., Relationship between surface area coverage of flow-aids and flowability of cohesive particles, Powder Technology, 322 (2017) 417–427. DOI: 10.1016/j.powtec.2017.09.013
10.1016/j.powtec.2017.09.013 ↗24. Geer S., Bernhardt-Barry M.L., Garboczi E.J., Whiting J., Donmez A., A more efficient method for calibrating discrete element method parameters for simulations of metallic powder used in additive manufacturing, Granular Matter, 20 (2018) 1–17. DOI: 10.1007/s10035-018-0848-4
10.1007/s10035-018-0848-4 ↗25. Girimonte R., Bernardo P., Minnicelli A., Formisani B., Experimental characterization of the cohesive behaviour of fine powders by the raining bed test, Powder Technology, 325 (2018) 373–380. DOI: 10.1016/j.powtec.2017.11.038
10.1016/j.powtec.2017.11.038 ↗26. Goh H.P., Heng P.W.S., Liew C.V., Investigation on the impact of powder arching in small die filling, International Journal of Pharmaceutics, 551 (2018) 42–51. DOI: 10.1016/j.ijpharm.2018.09.005
10.1016/j.ijpharm.2018.09.005 ↗27. Guo Y., Wu C.Y., Kafui K.D., Thornton C., 3D DEM/CFD analysis of size-induced segregation during die filling, Powder Technology, 206 (2011a) 177–188. DOI: 10.1016/j.powtec.2010.05.029
10.1016/j.powtec.2010.05.029 ↗28. Guo Y., Wu C.Y., Thornton C., The effects of air and particle density difference on segregation of powder mixtures during die filling, Chemical Engineering Science, 66 (2011b) 661–673. DOI: 10.1016/j.ces.2010.11.017
10.1016/j.ces.2010.11.017 ↗29. Gutam K.J., Mehandia V., Nott P.R., Rheometry of granular materials in cylindrical Couette cells: Anomalous stress caused by gravity and shear, Physics of Fluids, 25 (2013) 070602. DOI: 10.1063/1.4812800
10.1063/1.4812800 ↗30. Haeri S., Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations, Powder Technology, 321 (2017) 94–104. DOI: 10.1016/j.powtec.2017.08.011
10.1016/j.powtec.2017.08.011 ↗31. Han Q., Gu H., Setchi R., Discrete element simulation of powder layer thickness in laser additive manufacturing, Powder Technology, 352 (2019) 91–102. DOI: 10.1016/j.powtec.2019.04.057
10.1016/j.powtec.2019.04.057 ↗32. Hare C., Ghadiri M., The influence of aspect ratio and roughness on flowability, API Conference Proceedings, 1542 (2013) 887–890. DOI: 10.1063/1.4812074
10.1063/1.4812074 ↗33. Hare C., Zafar U., Ghadiri M., Freeman T., Clayton J., Murtagh M.J., Analysis of the dynamics of the FT4 powder rheometer, Powder Technology, 285 (2015) 123–127. DOI: 10.1016/j.powtec.2015.04.039
10.1016/j.powtec.2015.04.039 ↗34. Hassanpour A., Ghadiri M., Characterisation of flowability of loosely compacted cohesive powders by indentation, Particle & Particle Systems Characterization, 24 (2007) 117–123. DOI: 10.1002/ppsc.200601111
10.1002/ppsc.200601111 ↗35. Howell D., Behringer R.P., Veje C., Stress fluctuations in a 2D granular Couette experiment: A continuous transition, Physical Review Letters, 82 (1999) 5241–5244. DOI: 10.1103/PhysRevLett.82.5241
10.1103/PhysRevLett.82.5241 ↗36. Hosokawa Micron Powder Tester PT-X, Standard Test Method for Bulk Solids Characterization by Carr Indices, ASTM International Designation: D 6393-08.
37. Jia X., Williams R.A., A packing algorithm for particles of arbitrary shapes. Powder Technology, 120 (2001) 175–186. DOI: 10.1016/S0032-5910(01)00268-6
10.1016/S0032-5910(01)00268-6 ↗38. Johanson K., SSSpinTester-X Powder Strength Tester, Material Flow Solutions, Inc., https://www.matflowsol.com/images/PDF/products/SSSpinTester/Full%20Brochure.pdf, (2019).
39. Jop P., Forterre Y, Pouliquen O., A constitutive law for dense granular flows, Nature, 441 (2006) 727–730. DOI: 10.1038/nature04801
10.1038/nature04801 ↗40. Klausner J.F., Chen D., Mei R., Experimental investigation of cohesive powder rheology, Powder Technology, 112 (2000) 94–101. DOI: 10.1016/S0032-5910(99)00310-1
10.1016/S0032-5910(99)00310-1 ↗41. Ku N.,Hare C.L., Ghadiri M., Murtagh M.J., Oram P., Haber R.A., Auto-granulation of fine cohesive powder by mechanical vibration, Procedia Engineering, 102 (2015) 72–80. DOI: 10.1016/j.proeng.2015.01.108
10.1016/j.proeng.2015.01.108 ↗42. Langroudi M.K., Turek S., Ouazzi A., Tardos G.I., An investigation of frictional and collisional powder flows using a unified constitutive equation, Powder Technology, 197 (2010) 91–101. DOI: 10.1016/j.powtec.2009.09.001
10.1016/j.powtec.2009.09.001 ↗43. Li M.,Leturia M., Saleh K., Analysis of the periodic motion in a powder rheometer and development of a new Flowability testing method, KONA Powder and Particle Journal, 35 (2018) 160–171. DOI: 10.14356/kona.2018002
10.14356/kona.2018002 ↗44. López A., Vivacqua V., Hammond R., Ghadiri M., Analysis of screw feeding of faceted particles by discrete element method, Personal Communication (2019).
10.1016/j.powtec.2020.03.064 ↗45. Luding S., Cohesive frictional powders: contact models for tension, Granular Matter, 10 (2008) 235–246. DOI: 10.1007/s10035-008-0099-x
10.1007/s10035-008-0099-x ↗46. Lumay G., Boschini F., Traina K., Bontempi S., Remy J.-C., Cloots R., Vandewalle N., Measuring the flowing properties of powders and grains, Powder Technology, 224 (2012) 19–27. DOI: 10.1016/j.powtec.2012.02.015
10.1016/j.powtec.2012.02.015 ↗47. Lumay G., Traina K., Boschini F., Delaval V., Rescaglio A., Cloots R., Vandewalle N., Effect of relative air humidity on the flowability of lactose powders, Journal of Drug Delivery Science and Technology, 35 (2016) 207–212. DOI: 10.1016/j.jddst.2016.04.007
10.1016/j.jddst.2016.04.007 ↗48. Lun C.K.K., Savage S.B., Jeffrey D.J., Chepurniy N., Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flow field, Journal of Fluid Mechanics, 140 (1984) 223–256. DOI: 10.1017/S0022112084000586
10.1017/S0022112084000586 ↗49. Macaulay M., Rognon P., Shear-induced diffusion in cohesive granular flows: Effect of enduring clusters, Journal of Fluid Mechanics, 858 (2019) R2. DOI: 10.1017/jfm.2018.861
10.1017/jfm.2018.861 ↗50. Mellin P., Lyckfeldt O., Harlin P., Brodin H., Blom H., Strondl A., Evaluating flowability of additive manufacturing powders, using the Gustavsson flow meter, Metal Powder Report, 72 (2017) 322–326. DOI: 10.1016/j.mprp.2017.06.003
10.1016/j.mprp.2017.06.003 ↗51. MiDi G.D.R., On dense granular flows, The European Physical Journal E, 14 (2004) 341–365. DOI: 10.1140/epje/i2003-10153-0
10.1140/epje/i2003-10153-0 ↗52. Morrison A.J., Govender I., Mainza A.N., Parker D.J., The shape and behaviour of a granular bed in a rotating drum using Eulerian flow fields obtained from PEPT, Chemical Engineering Science, 152 (2016) 186–198. DOI: 10.1016/j.ces.2016.06.022
10.1016/j.ces.2016.06.022 ↗53. Nalluri V.R., Kuentz M., Flowability characterisation of drug-excipient blends using a novel powder avalanching method, European Journal of Pharmaceutics and Biopharmaceutics, 74 (2010) 388. DOI: 10.1016/j.ejpb.2009.09.010
10.1016/j.ejpb.2009.09.010 ↗54. Nan W., Ghadiri M., Numerical simulation of powder flow during spreading in additive manufacturing, Powder Technology, 342 (2019) 801–807. DOI: 10.1016/j.powtec.2018.10.056
10.1016/j.powtec.2018.10.056 ↗55. Nan W., Pasha M., Bonakdar T., Lopez A., Zafar U., Nadimi S., Ghadiri M., Jamming during particle spreading in additive manufacturing, Powder Technology, 338 (2018) 253–262. DOI: 10.1016/j.powtec.2018.07.030
10.1016/j.powtec.2018.07.030 ↗56. Nan W., Ghadiri M., Wang Y., Analysis of powder rheometry of FT4: Effect of air flow, Chemical Engineering Science, 162 (2017a) 141–151. DOI: 10.1016/j.ces.2017.01.002
10.1016/j.ces.2017.01.002 ↗57. Nan W., Vivacqua V., Ghadiri M., Wang Y., Numerical analysis of air effect on the powder flow dynamics in the FT4 Powder Rheometer, EPJ Web of Conferences, 140 (2017b) 03036. DOI: 10.1051/epjconf/201714003036
10.1051/epjconf/201714003036 ↗58. Nan W, Ghadiri M, Wang Y, Analysis of powder rheometry of FT4: Effect of particle shape, Chemical Engineering Science, 173 (2017c) 374–383. DOI: 10.1016/j.ces.2017.08.004
10.1016/j.ces.2017.08.004 ↗59. Nguyen Q.B., Nai M.L.S., Zhu Z., Sun C.N., Wei J., Zhou W., Characteristics of Inconel powders for powder-bed additive manufacturing, Engineering, 3 (2017) 695–700. DOI: 10.1016/J.ENG.2017.05.012
10.1016/J.ENG.2017.05.012 ↗60. Ogata K., A review: Recent progress on evaluation of flowability and floodability of powder, KONA Powder and Particle Journal, 36 (2019) 33–49. DOI: 10.14356/kona.2019002
10.14356/kona.2019002 ↗61. Parrella L., Barletta D., Boerefijin R., Poletto M., Comparison between a uniaxial compaction tester and a shear tester for the characterization of powder flowability, KONA Powder and Particle Journal, 26 (2008) 178–189. DOI: 10.14356/kona.2008016
10.14356/kona.2008016 ↗62. Pasha M., Hare C., Hassanpour A., Ghadiri M., Analysis of ball indentation on cohesive powder beds using distinct element modelling, Powder Technology, 233 (2013) 80–90. DOI: 10.1016/j.powtec.2012.08.017
10.1016/j.powtec.2012.08.017 ↗63. Pasha M., Dogbe S., Hare C., Hassanpour A., Ghadiri M., A linear model of elasto-plastic and adhesive contact deformation, Granular Matter, 16 (2014) 151–162. DOI: 10.1007/s10035-013-0476-y
10.1007/s10035-013-0476-y ↗64. Pasha M., Hare C., Ghadiri M., Gunadi A., Piccione P.M., Effect of particle shape on flow in discrete element method simulation of a rotary batch seed coater, Powder Technology, 296 (2016) 29–36. DOI: 10.1016/j.powtec.2015.10.055
10.1016/j.powtec.2015.10.055 ↗65. Potapov A.V., Campbell C.S., A three-dimensional simulation of brittle solid fracture, International Journal of Modern Physics C, 7 (1996) 717–729. DOI: 10.1142/S0129183196000594
10.1142/S0129183196000594 ↗66. Pournin L., Weber M., Tsukahara M., Ferrez J.A., Ramaioli M., Liebling T.M., Three-dimensional distinct element simulation of spherocylinder crystallization, Granular Matter, 7 (2005) 119–126. DOI: 10.1007/s10035-004-0188-4
10.1007/s10035-004-0188-4 ↗67. Qin H., Flow behavior of granular materials: quasi-static to inertial transition, Doctoral dissertation, University of Florida, (2000).
68. Qu L., Zhou Q.T., Denman J.A., Stewart P.J., Hapgood K.P., Morton D.A., Influence of coating material on the flowability and dissolution of dry-coated fine ibuprofen powders, European Journal of Pharmaceutical Sciences, 78 (2015) 264–272. DOI: 10.1016/j.ejps.2015.07.016
10.1016/j.ejps.2015.07.016 ↗69. Rognon P.G., Roux J.-N., Naaïm M, Chevoir F., Dense flow of cohesive granular materials, Journal of Fluid Mechanics, 596 (2008) 21–47. DOI: 10.1017/S0022112007009329
10.1017/S0022112007009329 ↗70. Rothenburg L., Bathurst R.J., Numerical simulation of idealized granular assemblies with plane elliptical particles, Computers and Geotechnics, 11 (1991) 315–329. DOI: 10.1016/0266-352X(91)90015-8
10.1016/0266-352X(91)90015-8 ↗71. Savage S.B., Sayed M., Stresses developed by dry cohesionless granular materials sheared in an annular shear cell, Journal of Fluid Mechanics, 142 (1984) 391–430. DOI: 10.1017/S0022112084001166
10.1017/S0022112084001166 ↗72. Salehi H., Barletta D., Poletto M., Schütz D., Romirer R., On the use of a powder rheometer to characterize the powder flow-ability at low consolidation with torque resistances, AIChE Journal, 63 (2017) 4788–4798. DOI: 10.1002/aic.15934
10.1002/aic.15934 ↗73. Salehi H., Sofia D., Schütz D., Barletta D., Poletto M., Experiments and simulation of torque in Anton Paar powder cell, Particulate Science and Technology, 36 (2018) 501–512. DOI: 10.1080/02726351.2017.1409850
10.1080/02726351.2017.1409850 ↗74. Schulze D., A new ring shear tester for flowability and time consolidation measurements, in: 1st International Particle Technology Forum, USA, (1994) 11–16.
75. Schwedes J., Schulze D., Measurement of flow properties of bulk solids, Powder Technology, 61 (1990) 59–68. DOI: 10.1016/0032-5910(90)80066-8
10.1016/0032-5910(90)80066-8 ↗76. Tardos G.I., Khan M.I., Schaeffer D.G., Forces on a slowly rotating, rough cylinder in a Couette device containing a dry, frictional powder, Physical of Fluids, 10 (1998) 335–341. DOI: 10.1063/1.869525
10.1063/1.869525 ↗77. Tardos G.I., McNamara S., Talu I., Slow and intermediate flow of a frictional bulk powder in the Couette geometry, Powder Technology, 131 (2003) 23–39. DOI: 10.1016/S0032-5910(02)00315-7
10.1016/S0032-5910(02)00315-7 ↗78. Tirupataiah Y., Sundararajan G., The volume of the crater formed by the impact of a ball against flat target materials: The effect of ball hardness and density, International Journal of Impact Engineering, 9 (1990) 237–246. DOI: 10.1016/0734-743X(90)90015-N
10.1016/0734-743X(90)90015-N ↗79. Tirapelle M., Santomaso A., Hare C., Characterising powder flowability at high shear rates by the ball indentation method, Chemical Engineering Transactions, 76 (2019) 391–396. DOI: 10.3303/CET1974066
80. Tomasetta I., Barletta D., Lettieri P., Poletto M., The measurement of powder flow properties with a mechanically stirred aerated bed, Chemical Engineering Science, 69 (2012) 373–381. DOI: 10.1016/j.ces.2011.10.056
10.1016/j.ces.2011.10.056 ↗81. Vanel L., Howell D., Clark D., Behringer R.P., Clement E., Memories in sand: Experimental tests of construction history on stress distribution under sandpiles, Physical Review E, 60 (1999) R5040. DOI: 10.1103/PhysRevE.60.R5040
10.1103/PhysRevE.60.R5040 ↗82. Vidyapati V., Kheiripour Langroudi M., Sun J., Sundaresan S., Tardos G.I., Subramaniam S., Experimental and computational studies of dense granular flow: Transition from quasi-static to intermediate regime in a Couette shear device, Powder Technology, 220 (2012) 7–14. DOI: 10.1016/j.powtec.2011.09.032.
10.1016/j.powtec.2011.09.032 ↗83. Vivacqua V., López A., Hammond R., Ghadiri M., DEM analysis of the effect of particle shape, cohesion and strain rate on powder rheometry, Powder Technology, 342 (2019) 653–663. DOI: 10.1016/j.powtec.2018.10.034
10.1016/j.powtec.2018.10.034 ↗84. Wilkinson S.K., Turnbull S.A., Yan Z., Stitt E.H., Marigo M., A parametric evaluation of powder flowability using a Freeman rheometer through statistical and sensitivity analysis: A discrete element method (DEM) study, Computers & Chemical Engineering, 97 (2017) 161–174. DOI: 10.1016/j.compchemeng.2016.11.034
10.1016/j.compchemeng.2016.11.034 ↗85. Williams J.R., Pentland A.P., Superquadrics and modal dynamics for discrete elements in interactive design, Engineering Computations, 9 (1992) 115–127. DOI: 10.1108/eb023852
10.1108/eb023852 ↗86. Yang H., Jiang G.L., Saw H.Y., Davies C., Biggs M.J., Zivkovic V., Granular dynamics of cohesive powders in a rotating drum as revealed by speckle visibility spectroscopy and synchronous measurement of forces due to avalanching, Chemical Engineering Science, 146 (2016) 1–9. DOI: 10.1016/j.ces.2016.02.023
10.1016/j.ces.2016.02.023 ↗87. Zafar U., Hare C., Hassanpour A., Ghadiri M., Drop test: A new method to measure the particle adhesion force, Powder Technology, 264 (2014) 236–241. DOI: 10.1016/j.powtec.2014.04.022
10.1016/j.powtec.2014.04.022 ↗88. Zafar U., Hare C., Hassanpour A., Ghadiri M., Ball indentation on powder beds for assessing powder flowability: Analysis of operation window, Powder Technology, 310 (2017) 300–306. DOI: 10.1016/j.powtec.2017.01.047
10.1016/j.powtec.2017.01.047 ↗89. Zafar U., Hare C., Hassanpour A., Ghadiri M., Effect of Strain Rate on Powder Flow Behaviour Using Ball Indentation Method, Personal Communication, 2019.