How Should the Discrete Element Method Be Applied in Industrial Systems?: A Review
Source abstract
Abstract
In this paper, we describe an industrial application of the discrete element method (DEM). The DEM has been applied to various powder systems thus far and therefore appears to be an established approach. However, it cannot be applied to many industrial systems because of several critical problems such as modeling of large-scale simulations, complexly shaped wall boundaries and free surface fluid flow. To solve these problems, novel models were developed by our group. A coarse-grain DEM model was developed for large-scale simulations, a signed distance function-based wall boundary model was developed for complexly shaped walls and a DEM-moving particle semi-implicit method was developed for solid-liquid flow involving a free surface. The adequacy of these models was demonstrated through verification and validation tests. Our approach shows promise in industrial applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Granular flow and fluidized beds · Fluid Dynamics Simulations and Interactions · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Resilience Engineering Research Center, School of Engineering, The University of Tokyo, Japan
References (58)
Show source-provided references
1. Alobaid F., Ströhle J., Epple B., Extended CFD/DEM model for the simulation of circulating fluidized bed, Adv. Powder Technol., 24 (2013) 403–415.10.1016/j.apt.2012.09.003 ↗
2. Anderson T.B., Jackson R., Fluid Mechanical Description of Fluidized Beds. Equations of Motion, Fluid Mech. Descr. Fluid. Beds. Equations Motion, 6 (1967) 527–539.10.1021/i160024a007 ↗
3. Chandratilleke G.R., Yu a.B., Bridgwater J., A DEM study of the mixing of particles induced by a flat blade, Chem. Eng. Sci., 79 (2012) 54–74.10.1016/j.ces.2012.05.010 ↗
4. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Geotechnique, 29 (1979) 47–65.10.1680/geot.1979.29.1.47 ↗
5. Danby M., Shrimpton J., Palmer M., On the optimal numerical time integration for DEM using Hertzian force models, Comput. Chem. Eng., 58 (2013) 211–222.10.1016/j.compchemeng.2013.06.018 ↗
6. Eitzlmayr A., Koscher G., Reynolds G., Huang Z., Booth J., Shering P., Khinast J., Mechanistic Modeling of Modular Co-Rotating Twin-Screw Extruders, Int. J. Pharm., 474 (2014) 157–176.10.1016/j.ijpharm.2014.08.005 ↗
7. Ergun S., Fluid flow through packed columns, Chem. Eng. Progr., 48 (1952) 89–94.
8. Fraige F.Y., Langston P.a, Integration schemes and damping algorithms in distinct element models, Adv. Powder Technol., 15 (2004) 227–245.10.1163/156855204773644454 ↗
9. Guo Y., Kafui K.D., Wu C.Y., Thornton C., Seville J.P.K., A coupled DEM/CFD analysis of the effect of air on powder flow during die filling, AIChE J., 55 (2009) 49–62.10.1002/aic.11734 ↗
10. Halidan M., Chandratilleke G.R., Chan S.L.I., Yu A.B., Bridgwater J., Prediction of the mixing behaviour of binary mixtures of particles in a bladed mixer, Chem. Eng. Sci., 120 (2014) 37–48.10.1016/j.ces.2014.08.048 ↗
11. Hernández-Jiménez F., Li T., Cano-Pleite E., Rogers W., Acosta-Iborra A., Characterization of the particle-wall frictional forces in pseudo-2D fluidized beds using DEM, Chem. Eng. Sci., 116 (2014) 136–143.10.1016/j.ces.2014.04.033 ↗
12. Hong K., Chen S., Wang W., Li J., Fine-grid two-fluid modeling of fluidization of Geldart A particles, Powder Technol., 2015.10.1016/j.powtec.2015.07.003 ↗
13. Huang A.N., Kuo H.P., Developments in the tools for the investigation of mixing in particulate systems—A review, Adv. Powder Technol., 25 (2014) 163–173.10.1016/j.apt.2013.10.007 ↗
14. Jajcevic D., Siegmann E., Radeke C., Khinast J.G., Large-scale CFD-DEM simulations of fluidized granular systems, Chem. Eng. Sci., 98 (2013) 298–310.10.1016/j.ces.2013.05.014 ↗
15. Kawaguchi T., Tanaka T., Tsuji Y., Numerical simulation of two-dimensional fluidized beds using the discrete element method (comparison between the two- and three-dimensional models), Powder Technol., 96 (1998) 129–138.10.1016/S0032-5910(97)03366-4 ↗
16. Kobayashi T., Tanaka T., Shimada N., Kawaguchi T., DEM-CFD analysis of fluidization behavior of Geldart Group A particles using a dynamic adhesion force model, Powder Technol., 248 (2013) 143–152.10.1016/j.powtec.2013.02.028 ↗
17. Koshizuka S., Nobe A., Oka Y., Moving-particle semi-implicit method for fragmentation of incompressible fluid, Nucl. Sci. Eng., 123 (1996) 421–434.10.13182/NSE96-A24205 ↗
18. Kruggel-Emden H., Sturm M., Wirtz S., Scherer V., Selection of an appropriate time integration scheme for the discrete element method (DEM), Comput. Chem. Eng., 32 (2008) 2263–2279.10.1016/j.compchemeng.2007.11.002 ↗
19. Kuang S.B., Li K., Zou R.P., Pan R.H., Yu A.B., Application of periodic boundary conditions to CFD-DEM simulation of gas-solid flow in pneumatic conveying, Chem. Eng. Sci., 93 (2013) 214–228.10.1016/j.ces.2013.01.055 ↗
20. Liu H., Tafti D.K., Li T., Hybrid parallelism in MFIX CFD-DEM using OpenMP, Powder Technol., 259 (2014) 22–29.10.1016/j.powtec.2014.03.047 ↗
21. Liu P.Y., Yang R.Y., Yu A.B., Dynamics of wet particles in rotating drums: Effect of liquid surface tension, Phys. Fluids, 23 (2011).10.1063/1.3543916 ↗
22. Lu L., Xu J., Ge W., Yue Y., Liu X., Li J., EMMS-based discrete particle method (EMMS-DPM) for simulation of gas-solid flows, Chem. Eng. Sci., 120 (2014) 67–87.10.1016/j.ces.2014.08.004 ↗
23. Mateo-Ortiz D., Muzzio F.J., Méndez R., Particle size segregation promoted by powder flow in confined space: The die filling process case, Powder Technol., 262 (2014) 215–222.10.1016/j.powtec.2014.04.023 ↗
24. Mio H., Higuchi R., Ishimaru W., Shimosaka A., Shirakawa Y., Hidaka J., Effect of paddle rotational speed on particle mixing behavior in electrophotographic system by using parallel discrete element method, Adv. Powder Technol., 20 (2009) 406–415.10.1016/j.apt.2009.05.002 ↗
25. Mio H., Kano J., Saito F., Kaneko K., Effects of rotational direction and rotation-to-revolution speed ratio in planetary ball milling, Mater. Sci. Eng. A, 332 (2002) 75–80.10.1016/S0921-5093(01)01718-X ↗
26. Monaghan J.J., An introduction to SPH, Comput. Phys. Comm., 48 (1988) 89–96.10.1016/0010-4655(88)90026-4 ↗
27. Ohta M., Kikuchi D., Yoshida Y., Sussman M., Robust numerical analysis of the dynamic bubble formation process in a viscous liquid, Int. J. Multiph. Flow, 37 (2011) 1059–1071.10.1016/j.ijmultiphaseflow.2011.05.012 ↗
28. Olaofe O.O., Patil A.V., Deen N.G., van der Hoef M.A., Kuipers J.A.M., Simulation of particle mixing and segregation in bidisperse gas fluidized beds, Chem. Eng. Sci., 108 (2014) 258–269.10.1016/j.ces.2014.01.009 ↗
29. Osher S., Fedkiw R., Level Set Methods and Dynamic Implicit Surfaces, Springer, 2002.10.1007/b98879 ↗
30. Pandit J.K., Wang X.S., Rhodes M.J., On Geldart Group A behaviour in fluidized beds with and without cohesive interparticle forces: A DEM study, Powder Technol., 164 (2006) 130–138.10.1016/j.powtec.2006.03.007 ↗
31. Patankar S.V., Numerical heat transfer and fluid flow, Routledge, 1980.
32. Patil A.V., Peters E.aJ.F., Kolkman T., Kuipers J.aM., Modeling bubble heat transfer in gas-solid fluidized beds using DEM, Chem. Eng. Sci., 105 (2014) 121–131.10.1016/j.ces.2013.11.001 ↗
33. Radeke C.A., Glasser B.J., Khinast J.G., Large-scale powder mixer simulations using massively parallel GPU architectures, Chem. Eng. Sci., 65 (2010) 6435–6442.10.1016/j.ces.2010.09.035 ↗
34. Sakai M., Abe M., Shigeto Y., Mizutani S., Takahashi H., Viré A., Percival J.R., Xiang J., Pain C.C., Verification and validation of a coarse grain model of the DEM in a bubbling fluidized bed, Chem. Eng. J., 244 (2014) 33–43.10.1016/j.cej.2014.01.029 ↗
35. Sakai M., Koshizuka S., Large-scale discrete element modeling in pneumatic conveying, Chem. Eng. Sci., 64 (2009) 533–539.10.1016/j.ces.2008.10.003 ↗
36. Sakai M., Shibata K., Koshizuka S., Effect of Nuclear Fuel Particle Movement on Nuclear Criticality in a Rotating Cylindrical Vessel, J. Nucl. Sci. Technol., 42 (2005) 267–274.10.3327/jnst.42.267 ↗
37. Sakai M., Shigeto Y., Basinskas G., Hosokawa A., Fuji M., Discrete element simulation for the evaluation of solid mixing in an industrial blender, Chem. Eng. J., 279 (2015) 821–839.10.1016/j.cej.2015.04.130 ↗
38. Sakai M., Shigeto Y., Sun X., Aoki T., Saito T., Xiong J., Koshizuka S., Lagrangian-Lagrangian modeling for a solid-liquid flow in a cylindrical tank, Chem. Eng. J., 200–202 (2012a) 663–672.10.1016/j.cej.2012.06.080 ↗
39. Sakai M., Takahashi H., Pain C.C., Latham J.-P., Xiang J., Study on a large-scale discrete element model for fine particles in a fluidized bed, Adv. Powder Technol., 23 (2012b) 673–681.10.1016/j.apt.2011.08.006 ↗
40. Sakai M., Yamada Y., Shigeto Y., Shibata K., Kawasaki V.M., Koshizuka S., Large-scale discrete element modeling in a fluidized bed, Int. J. Numer. Meth. Fluids, 64 (2010) 1319–1335.10.1002/fld.2364 ↗
41. Salikov V., Antonyuk S., Heinrich S., Sutkar V.S., Deen N.G., Kuipers J.aM., Characterization and CFD-DEM modelling of a prismatic spouted bed, Powder Technol., 270 (2014) 622–636.10.1016/j.powtec.2014.05.026 ↗
42. Shigeto Y., Sakai M., Arbitrary-shaped wall boundary modeling based on signed distance functions for granular flow simulations, Chem. Eng. J., 231 (2013) 464–476.10.1016/j.cej.2013.07.073 ↗
43. Shigeto Y., Sakai M., Parallel computing of discrete element method on multi-core processors, Particuology, 9 (2011) 398–405.10.1016/j.partic.2011.04.002 ↗
44. Sun X., Sakai M., Sakai M.-T., Yamada Y., A Lagrangian-Lagrangian coupled method for three-dimensional solid-liquid flows involving free surfaces in a rotating cylindrical tank, Chem. Eng. J., 246 (2014) 122–141.10.1016/j.cej.2014.02.049 ↗
45. Tsuji Y., Multi-scale modeling of dense phase gas-particle flow, Chem. Eng. Sci., 62 (2007) 3410–3418.10.1016/j.ces.2006.12.090 ↗
46. Tsuji Y., Kawaguchi T., Tanaka T., Discrete particle simulation of two dimensional fluidized bed, Powder Technol., 77 (1993) 79–87.10.1016/0032-5910(93)85010-7 ↗
47. Tsuji Y., Tanaka T., Ishida T., Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe, Powder Technol., 71 (1992) 239–250.10.1016/0032-5910(92)88030-L ↗
48. Vu T.V., Tryggason G., Homma S., Wells J., Takakura H., Front Tracking Computation of Trijunction Solidification with Volume Change, Procedia IUTAM, 15 (2015) 14–17.10.1016/j.piutam.2015.04.003 ↗
49. Wang J., van der Hoef M.a., Kuipers J.aM., Particle granular temperature of Geldart A, A/B and B particles in dense gas-fluidized beds, Chem. Eng. Sci., 97 (2013) 264–271.10.1016/j.ces.2013.04.028 ↗
50. Washino K., Tan H.S., Hounslow M.J., Salman a.D., A new capillary force model implemented in micro-scale CFD-DEM coupling for wet granulation, Chem. Eng. Sci., 93 (2013) 197–205.10.1016/j.ces.2013.02.006 ↗
51. Wen C.Y., Yu Y.H., Mechanics of fluidization, Chem. Eng. Progr. Symp. Ser., 62 (1966) 100–111.
52. Wu C.Y., DEM simulations of die filling during pharmaceutical tabletting, Particuology, 6 (2008) 412–418.10.1016/j.partic.2008.07.008 ↗
53. Wu G., Ouyang J., Yang B., Li Q., Use of compromise-based local porosities for coarse grid DEM simulation of bubbling fluidized bed with large particles, Adv. Powder Technol., 24 (2013) 68–78.10.1016/j.apt.2012.02.003 ↗
54. Xiao F., Ii S., Chen C., Revisit to the THINC scheme: A simple algebraic VOF algorithm, J. Comput. Phys., 230 (2011) 7086–7092.10.1016/j.jcp.2011.06.012 ↗
55. Xu M., Chen F., Liu X., Ge W., Li J., Discrete particle simulation of gas-solid two-phase flows with multi-scale CPU-GPU hybrid computation, Chem. Eng. J., 207–208 (2012) 746–757.10.1016/j.cej.2012.07.049 ↗
56. Yamada Y., Sakai M., Lagrangian-Lagrangian simulations of solid-liquid flows in a bead mill, Powder Technol, 239 (2013) 105–114.10.1016/j.powtec.2013.01.030 ↗
57. Yokoi K., Efficient implementation of THINC scheme: A simple and practical smoothed VOF algorithm, J. Comput. Phys., 226 (2007) 1985–2002.10.1016/j.jcp.2007.06.020 ↗
58. Yue X., Hao Z., Chunhai K., Congshu L., Shi S., Yuanqiang T., Chunsheng F., A GPU-based Discrete Element Modelling Code and its Application in Die Filling, Comput. Fluids, 110 (2014) 235–244.10.1016/j.compfluid.2014.11.020 ↗