journal article·2018Open access

Effect of Particle Size and Cohesion on Powder Yielding and Flow

Hao Shi, Rahul Mohanty, Somik Chakravarty, Ramon Cabiscol, Martin Morgeneyer, Harald Zetzener, Jin Y. Ooi, Arno Kwade, Stefan Luding, Vanessa Magnanimo

KONA Powder and Particle Journal· Volume 35· Issue 0

Abstract

The bulk properties of powders depend on material characteristics and size of the primary particles. During storage and transportation processes in the powder processing industry, the material undergoes various modes of deformation and stress conditions, e.g., due to compression or shear. In many applications, it is important to know when powders are yielding, i.e. when they start to flow under shear; in other cases it is necessary to know how much stress is needed to keep them flowing. The measurement of powder yield and flow properties is still a challenge and will be addressed in this study.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Particle Dynamics in Fluid Flows · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Multi-Scale Mechanics (MSM), Faculty of Engineering Technology (ET), MESA+, University of Twente, The Netherlands

Institute for Particle Technology (iPAT), TU Braunschweig, Germany

Institute of Infrastructure and Environment, School of Engineering, University of Edinburgh, UK

Laboratoire Transformations Intégrées de la Matière Renouvelable (TIMR), Université de Technologie de Compiègne (UTC) Sorbonne Universités, France

Funding

European Commission

References (66)

Show source-provided references
1. Akers R.J., The certification of a limestone powder for Jenike shear testing (CRM 116), EUR (Luxembourg), 1992.
2. Alonso-Marroquin F., Herrmann H.J., Ratcheting of granular materials, Physics Review Letter, 92 (2004) 54301.10.1103/PhysRevLett.92.054301 ↗
3. Alshibli K.A., Sture S., Shear band formation in plane strain experiments of sand, Journal of Geotechnical and Geoenvironmental Engineering, 126 (2000) 495–503.10.1061/(ASCE)1090-0241(2000)126:6(495) ↗
4. ASTM-D6128-16, Standard test method for shear testing of bulk solids using the Jenike shear cell, West Conshohocken, PA: ASTM International, 2006.
5. ASTM-D6773-16, Standard shear test method for bulk solids using the Schulze ring shear tester, West Conshohocken, PA: ASTM International, 2008.
6. ASTM-D7891-15, Standard test method for shear testing of powders using the freeman technology FT4 powder rheometer shear cell, West Conshohocken, PA: ASTM International, 2015.
7. Bardet J.P., Experimental Soil Mechanics, Prentice-Hall, Upper Saddle River, New Jersey, 1997.
8. Berry R.J., Bradley M.S.A., McGregor R.G., Brookfield powder flow tester-Results of round robin tests with CRM-116 limestone powder, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (2015) 215–230.10.1177/0954408914525387 ↗
9. Bi D., Zhang J., Chakraborty B., Behringer R.P., Jamming by shear, Nature, 480 (2011) 355–358.10.1038/nature10667 ↗
10. Carr J.F., Walker D.M., An annular shear cell for granular materials, Powder Technology, 1 (1968) 369–373.10.1016/0032-5910(68)80019-1 ↗
11. Casagrande A., The determination of the pre-consolidation load and its practical significance, Proceedings of the international conference on soil mechanics and foundation engineering, 3 (1936) 60–64.
12. Cates M.E., Haw M.D., Holmes C.B., Dilatancy, jamming, and the physics of granulation, Journal of Physics: Condensed Matter, 17 (2005) S2517.10.1088/0953-8984/17/24/010 ↗
13. Cundall P.A., Numerical experiments on localization in frictional materials, Ingenieur-Archiv, 59 (1989) 148–159.10.1007/BF00538368 ↗
14. Feise H.J., A review of induced anisotropy and steady-state flow in powders, Powder Technology, 98 (1998) 191–200.10.1016/S0032-5910(98)00064-3 ↗
15. Feise H., Schwedes J., Investigation of the Behaviour of Cohesive Powder in the Biaxial Tester, KONA Powder Particle Journal, 13 (1995) 99–104.10.14356/kona.1995014 ↗
16. Fitzpatrick J.J., Barringer S.A., Iqbal T., Flow property measurement of food powders and sensitivity of Jenike’s hopper design methodology to the measured values, Journal of Food Engineering, 61 (2004) 399–405.10.1016/S0260-8774(03)00147-X ↗
17. Freeman R., Measuring the flow properties of consolidated, conditioned and aerated powders—A comparative study using a powder rheometer and a rotational shear cell, Powder Technology, 174 (2007) 25–33.10.1016/j.powtec.2006.10.016 ↗
18. Freeman R.E., Cooke J.R., Schneider L.C.R., Measuring shear properties and normal stresses generated within a rotational shear cell for consolidated and non-consolidated powders, Powder Technology, 190 (2009) 65–69.10.1016/j.powtec.2008.04.084 ↗
19. GDR-MiDi, On dense granular flows, European Physical Journal E–Soft Matter, 14 (2004) 341–365.10.1140/epje/i2003-10153-0 ↗
20. Harder J., Schwedes J., The development of a true biaxial shear tester, Particle & Particle Systems Characterization, 2 (1985) 149–153.10.1002/ppsc.19850020127 ↗
21. Imole O.I., Paulick M., Magnanimo V., Morgeneyer M., Montes B.E., Ramaioli M., Kwade A., Luding S., Slow stress relaxation behavior of cohesive powders, Powder Technology, 293 (2016) 82–93.10.1016/j.powtec.2015.12.023 ↗
22. Janssen R.J.M., Zetzener H., Measurements on cohesive powder with two biaxial shear testers, Chemical Engineering & Technology, 26 (2003) 147–151.10.1002/ceat.200390021 ↗
23. Jenike A.W., Storage and Flow of Solids, Bulletin No. 123, Bulletin of the University of Utah, 53 (1964).
24. Jenike A.W., Quantitative design of mass-flow bins, Powder Technology, 1 (1967) 237–244.10.1016/0032-5910(67)80042-1 ↗
25. Jenike A.W., Storage and flow of solids. bulletin no. 123, vol. 53, no. 26, November 1964, Technical report, Utah University, Salt Lake City (USA), 1976.10.2172/5240257 ↗
26. Kamath S., Puri V.M., Manbeck H.B., Flow property measurement using the Jenike cell for wheat flour at various moisture contents and consolidation times, Powder Technology, 81 (1994) 293–297.10.1016/0032-5910(94)02888-5 ↗
27. Kamath S., Puri V.M., Manbeck H.B., Hogg R., Flow properties of powders using four testers-measurement, comparison and assessment, Powder Technology, 76 (1993) 277–289.10.1016/S0032-5910(05)80009-9 ↗
28. Koynov S., Glasser B., Muzzio F., Comparison of three rotational shear cell testers: Powder flowability and bulk density, Powder Technology, 283 (2015) 103–112.10.1016/j.powtec.2015.04.027 ↗
29. Kumar N., Luding S., Memory of jamming–multiscale models for soft and granular matter, Granular Matter, 18 (2016) 1–21.10.1007/s10035-016-0624-2 ↗
30. Liu A.J., Nagel S.R., Nonlinear dynamics: Jamming is not just cool any more, Nature, 396 (1998) 21–22.10.1038/23819 ↗
31. Luding S., Anisotropy in cohesive, frictional granular media, Journal of Physics: Condensed Matter, 17 (2005a) S2623–S2640.10.1088/0953-8984/17/24/017 ↗
32. Luding S., Shear flow modeling of cohesive and frictional fine powder, Powder Technology, 158 (2005b) 45–50.10.1016/j.powtec.2005.04.018 ↗
33. Luding S., Cohesive, frictional powders: contact models for tension, Granular Matter, 10 (2008) 235–246.10.1007/s10035-008-0099-x ↗
34. Luding S., Granular matter: So much for the jamming point, Nature, 12 (2016) 531–532.
35. Majmudar T.S., Behringer R.P., Contact force measurements and stress-induced anisotropy in granular materials, Nature, 435 (2005) 1079–1082.10.1038/nature03805 ↗
36. Morgeneyer M., Brendel L., Farkas Z., Kadau D., Wolf D.E., Schwedes J., Can one make a powder forget its history?, Proceedings of the 4th international conference for conveying and handling of particulate solids, Budapest, 2003, pp. 12–118.
37. Morgeneyer M., Schwedes J., Investigation of powder properties using alternating strain paths, Task Quarterly, 7 (2003) 571–578.
38. Rabinovich Y.I., Adler J.J., Ata A., Singh R.K., Moudgil B.M., Adhesion between nanoscale rough surfaces: I. Role of asperity geometry, Journal of Colloid and Interface Science, 232 (2000) 10–16.10.1006/jcis.2000.7167 ↗
39. Radjai F., Jean M., Moreau J.J., Roux S., Force distribution in dense two-dimensional granular systems, Physical Review Letters, 77 (1996) 274–277.10.1103/PhysRevLett.77.274 ↗
40. Radjai F., Roux S., Moreau J.J., Contact forces in a granular packing, Chaos: An Interdisciplinary Journal of Nonlinear Science, 9 (1999) 544–550.10.1063/1.166428 ↗
41. Rumpf H., Particle technology, Chapman & Hall, London/New York, 1990.10.1007/978-94-011-7944-7 ↗
42. Russell A., Müller P., Shi H., Tomas J., Influences of loading rate and preloading on the mechanical properties of dry elasto-plastic granules under compression, AIChE Journal, 60 (2014) 4037–4050.10.1002/aic.14572 ↗
43. Salehi H., Barletta D., Poletto M., A comparison between powder flow property testers, Particuology, 32 (2017) 10–20.10.1016/j.partic.2016.08.003 ↗
44. Savage S.B., Hutter K., The motion of a finite mass of granular material down a rough incline, Journal of Fluid Mechanics, 199 (1989) 177–215.10.1017/S0022112089000340 ↗
45. Schulze D., Entwicklung und Anwendung eines neuartigen Ringschergerätes, Aufbereitungs-Technik, 35 (1994) 524–535.
46. Schulze D., Flow properties of bulk solids (v), Deutsche Keramische Gesellschaft und Nederlandse Keramische Vereniging, Annual Meeting 2002, Eindhoven., 2002, pp. 21–23.10.
47. Schulze D., Time- and velocity-dependent properties of powders effecting slip-stick oscillations, Chemical Engineering & Technology, 26 (2003a) 1047–1051.10.1002/ceat.200303112 ↗
48. Schulze D., Towards more reliability in powder testing (v), Proceedings of the 4th international conference for conveying and handling of particulate solids (CHoPS), Budapest, 2003b, pp. 5–31.
49. Schulze D., Powders and bulk solids: behavior, characterization, storage and flow, Springer, 2008.
50. Schulze D., Round robin test on ring shear testers, Advanced Powder Technology, 22 (2011) 197–202.10.1016/j.apt.2010.10.015 ↗
51. Schulze D., Beispiele gemessener Fließeigenschaften, in ‘Pulver und Schüttgüter’, Springer, 2014a, pp. 249–268.10.1007/978-3-642-53885-8_8 ↗
52. Schulze D., Verfahrenstechnische Siloauslegung, in ‘Pulver und Schüttgüter’, Springer, 2014b, pp. 335–360.10.1007/978-3-642-53885-8_10 ↗
53. Schwedes J., Vergleichende Betrachtungen zum Einsatz von Schergeräten zur Messung von Schüttguteigenschaften, Proceedings of PARTEC, Nürnberg, 1979, pp. 278–300.
54. Schwedes J., Review on testers for measuring flow properties of bulk solids, Granular Matter, 5 (2003) 1–43.10.1007/s10035-002-0124-4 ↗
55. Schwedes J., Schulze D., Measurement of flow properties of bulk solids, Powder Technology, 61 (1990) 59–68.10.1016/0032-5910(90)80066-8 ↗
56. Shibuya S., Mitachi T., Tamate S., Interpretation of direct shear box testing of sands as quasi-simple shear, Geotechnique, 47 (1997) 769–790.10.1680/geot.1997.47.4.769 ↗
57. Singh A., Magnanimo V., Saitoh K., Luding S., Effect of cohesion on shear banding in quasistatic granular materials, Physical Review E, 90 (2014) 022202.10.1103/PhysRevE.90.022202 ↗
58. Teunou E., Fitzpatrick J.J., Synnott E.C., Characterisation of food powder flowability, Journal of Food Engineering, 39 (1999) 31–37.10.1016/S0260-8774(98)00140-X ↗
59. Thakur S.C., Ahmadian H., Sun J., Ooi J.Y., An experimental and numerical study of packing, compression, and caking behaviour of detergent powders, Particuology, 12 (2014) 2–12.10.1016/j.partic.2013.06.009 ↗
60. Tomas J., Product design of cohesive powders – Mechanical properties, compression and flow behavior, Chemical Engineering & Technology, 27(6) (2005) 605–618.10.1002/ceat.200406134 ↗
61. Tsunakawa H., Aoki R., Measurements of the failure properties of granular materials and cohesive powders, Powder Technology, 33 (1982) 249–256.10.1016/0032-5910(82)85063-8 ↗
62. Van Hecke M., Jamming of soft particles: geometry, mechanics, scaling and isostaticity, Journal of Physics: Condensed Matter, 22 (2009) 033101.10.1088/0953-8984/22/3/033101 ↗
63. Witt W., Altrogge D., Rutsch O., High speed image analysis and dispersion for size and shape characterisation on fibres, Proceedings of 5th World Congress of Particle Technology, 2006.
64. Wolf B., Scirocco R., Frith W.J., Norton I.T., Shear-induced anisotropic microstructure in phase-separated biopolymer mixtures, Food Hydrocolloids, 14 (2000) 217–225.10.1016/S0268-005X(99)00062-4 ↗
65. Yang Y., Fei W., Yu H.-S., Ooi J., Rotter M., Experimental study of anisotropy and non-coaxiality of granular solids, Granular Matter, 17 (2015) 189–196.10.1007/s10035-015-0551-7 ↗
66. Zetzener H., Schwedes J., Relaxation and creep of dry bulk solids, Particle & Particle Systems Characterization, 19 (2002) 144–148.10.1002/1521-4117(200207)19:3<144::AID-PPSC144>3.0.CO;2-S ↗