journal article·2026-02

The Microstructure and Properties of Graphene/Copper Composite Wires

Wei Chen, Yufei Chen, Meizhou Kuang, Haibing Chen, Gaoyong Lin

Publisher page

Abstract

In this study, multilayer lamination welding was employed to prepare graphene/copper (Gr/Cu) composite billets from graphene-coated copper foils, followed by multi-pass cold drawing to produceΦ1 mm Gr/Cu composite wires. Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire. After annealing at 350 °C for 30 minutes, the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74% IACS, both superior to those of pure copper wire under identical conditions. At 150 °C, the electrical conductivity of the annealed composite wire reaches 72.60% IACS, notably higher than the 68.19% IACS of pure copper. The results suggest that graphene is uniformly distributed within the composite wire, with minimal impact on conductivity, while effectively refining the copper grain structure to enhance ductility. Moreover, graphene suppresses copper lattice vibrations at elevated temperatures, reducing the rate of conductivity degradation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Advanced Welding Techniques Analysis · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Zhang D, Zhang GD, Li ZQ. Current Status and Development Trends of Metal Matrix Composites[J]. China Materials Progress, 2010, 4: 1–7
2. Xiao BL, Liu ZY, Zhang XX, et al. Metal Matrix Composites for Future Applications[J]. China Materials Progress, 2016, 9: 666–673
3. Zhang YF, Ss YA, Chen F, et al. Research Progress on High-Strength and High-Conductivity Copper-Based Materials[J]. Heat Treatment Technology and Equipment, 2001, 22(5): 6–8
4. Liu JP, Xiong DB, Tan ZQ, et al. Enhanced Mechanical Properties and High Electrical Conductivity in Multiwalled Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites[J]. Materials Science and Engineering, 2018, A729: 452–45710.1016/j.msea.2018.05.091 ↗
5. Chen NQ, Li Q, Ma YC, et al. Significant Strengthening of Copper-Based Composites Using Boron Nitride Nanotubes[J]. International Journal of Minerals Metallurgy and Materials, 2023, 30: 1 764–1 77810.1007/s12613-023-2633-6 ↗
6. Gao ZS, Zou TT, Wang M, et al. In-Situ Graphene Enhanced Copper Wire: A Novel Electrical Material with Simultaneously High Electrical Conductivity and High Strength[J]. Carbon, 2022, 186: 303–31210.1016/j.carbon.2021.10.015 ↗
7. Lee SJ, Yoon SJ, Jeon IY. Graphene/Polymer Nanocomposites: Preparation, Mechanical Properties, and Application[J]. Polymers, 2022, 14 (21): 4 73310.3390/polym14214733 ↗
8. Kim SK, Kim JY, Jang BC, et al. Conductive Graphitic Channel in Graphene Oxide-Based Memristive Devices[J]. Advanced Functional Materials, 2016, 26: 7 406–7 41410.1002/adfm.201602748 ↗
9. Kim YB, Lee J, Yeom MS, et al. Strengthening Effect of Single-Atomic-Layer Graphene in Metal-Graphene Nanolayered Composites [J]. Nature Communications, 2013, 4: 2 11410.1038/ncomms3114 ↗
10. Shao GS, Liu P, Zhang K, et al. Mechanical Properties of Graphene Nanoplates Reinforced Copper Matrix Composites Prepared by Electrostatic Self-Assembly and Spark Plasma Sintering[J]. Materials Science and Engineering, 2019, A739: 329–33410.1016/j.msea.2018.10.067 ↗
11. Cao M, Xiong DB, Xiong L, et al. Ultrahigh Electrical Conductivity of Graphene Embedded in Metals[J]. Advanced Functional Materials, 2019, 29, 1 806 79210.1002/adfm.201806792 ↗
12. Wang M, Sheng J, Wang LD, et al. Achieving High Strength and Electrical Properties in Drawn Fine Cu Matrix Composite Wire Reinforced by in-Situ Grown Graphene[J]. Journal of Materials Research and Technology, 2022, 17: 3 205–3 21010.1016/j.jmrt.2022.02.069 ↗
13. Zuo TT, Wang M, Xue JL, et al. Investigation on the Novel Copper-Based Composite Conductors Synergistically Improved by in-Situ Generated Graphene and Nanoparticles[J]. Materials Characterization, 2023, 200: 112 86310.1016/j.matchar.2023.112863 ↗
14. Li TJ, Wang YQ, Yang M, et al. High Strength and Conductivity Copper Matrix Composites Reinforced by in-Situ Graphene through Severe Plastic Deformation Processes[J]. Journal of Alloys and Compounds, 2021, 851: 156 70310.1016/j.jallcom.2020.156703 ↗
15. Zhao K, Zhang TF, Ren A, et al. High Ampacity of Superhelix Graphene/Copper Nanocomposite Wires by a Synergistic Growth-Twisting-Drawing Strategy[J]. Carbon, 2019, 141:198–20810.1016/j.carbon.2018.09.040 ↗
16. Zou J, Liu D, Zhao J, et al. Ni Nanobuffer Layer Provides Light-Weight CNT/Cu Fibers with Superior Robustness, Conductivity, and Ampacity[J]. ACS Applied Materials & Interfaces, 2018, 10(9): 8 197–8 20410.1021/acsami.7b19012 ↗
17. Zuo T, Xue J, Ru Y, et al. The Improved Softening Resistance and High Electrical Conductivity of the 3D Graphene Enhanced Copper-Based Composite Fabricated by Liquid Carbon Source[J]. Materials Letters, 2021, 283(15): 128 89510.1016/j.matlet.2020.128895 ↗
18. Shu SC, Zhang Q, Ihed J, et al. Surface Modification on Copper Particles toward Graphene Reinforced Copper Matrix Composites for Electrical Engineering Application[J]. Journal of Alloys and Compounds, 2022, 891, 162 05810.1016/j.jallcom.2021.162058 ↗
19. Lu RY, Liu B, Cheng HC, et al. Microstructure and Properties of a Graphene Reinforced Cu-Cr-Mg Composite[J]. Materials, 2022, 15 (17): 6 16610.3390/ma15176166 ↗
20. Kashani H, Kim C, Rudolf C, et al. An Axially Continuous Graphene-Copper Wire for High-power Transmission: Thermoelectrical Characterization and Mechanisms[J]. Advanced Materials, 2021, 33(51): 2 104 20810.1002/adma.202104208 ↗