High Toughness Resin Cured by UV Light for Trenchless Pipeline Repair
Source abstract
Abstract
In ultraviolet cured-in-place-pipe (UV-CIPP) pipeline rehabilitation, resin performance critically determines repair effectiveness. Current UV-curable resins exhibit high volatile organic compound (VOC) emissions and inadequate post-cure toughness, which compromise fatigue resistance during service. To address these issues, we synthesized hydroxyl-terminated polyurethane acrylate prepolymers using diphenylmethane diisocyanate (MDI), polypropylene glycol (PPG), and hydroxyethyl methacrylate (HEMA). Fourier transform infrared spectroscopy (FTIR) confirmed successful prepolymer synthesis. We developed UV-curable resins by incorporating various crosslinking monomers and optimized the formulations through mechanical property analysis. Testing revealed that the polyurethane–acrylic UV-cured resin system combines polyurethane’s mechanical excellence with acrylics’ high UV-curing activity. The PPG200/MDI/HEMA formulation achieved superior performance, with a tensile strength of 55.31 MPa, an impact toughness of 22.7 kJ/m2, and a heat deflection temperature (HDT) of 132 °C. The optimized system eliminates volatile components while maintaining high reactivity, addressing critical limitations in trenchless pipeline rehabilitation. The improved mechanical properties meet the operational demands of underground pipes, suggesting practical applicability in trenchless pipeline repair.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Structural Integrity and Reliability Analysis · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. SUN LP, ZHU JJ, TAN JX. Deep Learning-Assisted Automated Sewage Pipe Defect Detection for Urban Water Environment Management [J]. Sci. Total Environ., 2023, 882: 163 56210.1016/j.scitotenv.2023.163562 ↗
2. Bosseler B, Homann D, Brüggemann T. Quality Assessment of CIPP Lining in Sewers: Crucial Knowledge Acquired by IKT and Research Gaps Identified in Germany, Tunn[J]. Undergr. Space Technol., 2024, 143: 105 42510.1016/j.tust.2023.105425 ↗
3. Gao ZQ, Xu Q, Yu DSH. Discussion on Non-excavation Technology for Municipal Sewerage Pipeline[J]. Urban Construction Theoretical Research (Electronic Edition), 2023(13): 92–94
4. Xia Y, Shi M, Zhang C. Analysis of Flexural Failure Mechanism of Ultraviolet Cured-in-Place-Pipe Materials for Buried Pipelines Rehabilitation Based on Curing Temperature Monitoring[J]. Eng. Fail. Anal., 2022: 142: 106 76310.1016/j.engfailanal.2022.106763 ↗
5. Liao BY. Research on Non-Excavation Rehabilitation Technology of Drainage Pipe UV-CIPP[D]. Wuhan: China University of Geosciences, 2018
6. Wang CX, Guo LW, Xia YY. Flexural Performance and Damage Evolution of Multiple Fiberglass Reinforced UV-CIPP Composite Materials—A View from Mechanics and Energy Release[J]. J. Mater. Res. Technol., 2024, 29: 3 317–3 33910.1016/j.jmrt.2024.02.051 ↗
7. Tian Q. Preparation and Performance of Pipeline In-situ Restoration Glass Fiber Hose[D]. Tianjin: Tianjin University of Science and Technology, 2022
8. Yang NY. Preparation and Modification of Water-Based UV Bio-based Unsaturated Polyester Based on Itaconic Acid[D]. Guangzhou: Guangzhou University, 2023
9. Liu ZJ, Duan JY. Analysis of Construction Difficulties and Counter-measures for UV Inlaid Curing Restoration of Urban Drainage Pipes [J]. Engineering Technology Research, 2024, 9(02): 220–222
10. Desai P, Jagtap R. Synthesis of Ultraviolet Curable Bisphenol-Based Epoxy Acrylates and Comparative Study on Its Physico-Chemical Properties[J]. J. Appl. Polym. Sci., 2022, 139(17): 52 02210.1002/app.52022 ↗
11. Yuan ZF, Liu QC, Pan XY. Preparation and Properties of Star-Shaped UV-Curable Polyester Methacrylate Resins with Low Viscosity Derived from Renewable Resources[J]. Prog. Org. Coat., 2021, 157: 106 32410.1016/j.porgcoat.2021.106324 ↗
12. Zhou YQ, Zhang LM, Zhang QY. Preparation and Characterization of Photocurable Fluorinated Polyether-Based Reactive Inks[J]. J. Appl. Polym. Sci., 2023, 140(23): 53 92510.1002/app.53925 ↗
13. Hu R, Duan HJ, Chen YS. Synthesis and UV-Curing Properties of Tough Polyurethane Acrylate[J]. Journal of Wuhan University of Technology, 2020, 42(05): 17–23
14. Cheng BX, Gao WC, Ren XM. A Review of Microphase Separation of Polyurethane: Characterization and Applications[J]. Polymer Testing, 2022, 107: 107 48910.1016/j.polymertesting.2022.107489 ↗
15. Akindoyo JO, Beg MDH, Ghazali S. Polyurethane Types, Synthesis and Applications-a Review[J]. RSC Advances, 2016, 6: 114 453–114 48210.1039/C6RA14525F ↗
16. Boretos JW, William S. Pierce Segmented Polyurethane: an Elastomer for Biomedical Applications[J]. Science, 1967, 158: 1 481–1 48210.1126/science.158.3807.1481 ↗
17. Bao F, Shi W. Synthesis and Properties of Hyperbranched Polyurethane Acrylate Used for UV Curing Coatings, Prog[J]. Org. Coat., 2010(68): 334–33910.1016/j.porgcoat.2010.03.002 ↗
18. Xiang H, Wang X, Xi L. Effect of Soft Chain Length and Generation Number on Properties of Flexible Hyperbranched Polyurethane Acrylate and Its UV-Cured Film, Prog[J]. Org. Coat., 2018(114): 216–22210.1016/j.porgcoat.2017.10.019 ↗
19. Wu Y, Huang S, Liu X. Preparation of High-Performance Polyurethane-Polyacrylate Coatings Based on Hyperbranched Structure and Application in Anti-Ultraviolet Film, Prog[J]. Org. Coat., 2023(182): 107 61410.1016/j.porgcoat.2023.107614 ↗
20. Xiang H, Wang X, Lin G. Preparation, Characterization and Application of UV-Curable Flexible Hyperbranched Polyurethane Acrylate[J]. Polymers, 2017(9): 55210.3390/polym9110552 ↗
21. Ren YX, Dong YS, Yang RN. Preparation and Properties of Ultraviolet/Thermal Dual-Curable Polyurethane Acrylate[J]. Int. J. Adhes., 2020, 99: 102 58010.1016/j.ijadhadh.2020.102580 ↗
22. Dong WJ, Duan HJ, Tao XX. Design and Preparation of Polyurethane Acrylate with High Molecular Weight Degree and Its Light Curing Properties[J]. Polymer Materials Science and Engineering, 2018, 34 (10): 129–13410.1016/j.msea.2017.10.083 ↗