Structure and Properties of Nano-BaTiO3 Powders Synthesized via Hydrothermal Method using Different Precursors
Source abstract
Abstract
Four groups of nano barium titanate powders were prepared using the hydrothermal method. Their phase structure, microscopic morphology and electrical properties were investigated, and the impacts of raw materials on the barium titanate powders as well as the reaction mechanisms were explored. XRD and FTIR indicate the presence of hydroxyl groups and a small amount of carboxyl groups on the powder surface, and the choice of raw materials significantly affects phase purity, with H2TiO3as raw materials being prone to introducing impurity phases. SEM shows that different precursors lead to morphological differences: soluble raw materials form uniform nanoparticles through a “dissolution-precipitation” mechanism while using TiO2as the titanium source generates hollow bowl-like structures through an “in-situtransformation” mechanism, attributed to the synergistic effects of Ostwald ripening and Kirkendall diffusion. The dielectric properties tests indicate that the dielectric constant at room temperature (1 500–3 000) and Curie temperature (2 000–5 000) of the ceramics are both lower than those of ceramics produced by solid-state methods (4 000–6 000 and >10 000), and the phase transition temperature range is widened, which is attributed to factors such as grain refinement, reduced tetragonality, grain boundary effects, and increased defects.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Zhang J, Hao H, Guo Q, et al. Dielectric and Anti-reduction Properties of BaTiO3-based Ceramics for MLCC Application[J]. Ceramics International, 2023, 49(15): 24 941–24 94710.1016/j.ceramint.2023.05.023 ↗
2. Cai W, Fu C, Gao J, et al. Effects of Grain Size on Domain Structure and Ferroelectric Properties of Barium Zirconate Titanate Ceramics[J]. Journal of Alloys and Compounds, 2009, 480(2): 870–87310.1016/j.jallcom.2009.02.049 ↗
3. Lee K J, Lee J W, Lee C, et al. Modulation of Rare-earth Diffusion for Tailoring Diverse MLCC Application Requirements[J]. Journal of the European Ceramic Society, 2025, 45(10): 117 32610.1016/j.jeurceramsoc.2025.117326 ↗
4. Pu Y, Yang W, Chen S. Influence of Rare Earths on Electric Properties and Microstructure of Barium Titanate Ceramics[J]. Journal of Rare Earths, 2007, 25: 154–15710.1016/S1002-0721(07)60546-8 ↗
5. Luan S, Wang P, Zhang L, et al. Atmospherically Hydrothermal Assisted Solid-state Reaction Synthesis of Ultrafine BaTiO3 Powder with High Tetragonality[J]. Journal of Electroceramics, 2023, 50(4): 97–11110.1007/s10832-023-00308-y ↗
6. Wang P, Huang X, Zhao J, et al. A Study of Microstructure and Properties of BaTiO3 from Solid-state and Hydrothermal Synthesis on MLCCs Performance[J]. Journal of the American Ceramic Society, 2025, 108(4): e20 28310.1111/jace.20283 ↗
7. Turki O, Slimani A, Boufi S, et al. Sol-gel Hydrothermal Synthesis of Lead-free BT Nanoparticles for Enhanced Dielectric Properties in PVDF Nanocomposites[J]. Applied Surface Science, 2025, 679: 161 24210.1016/j.apsusc.2024.161242 ↗
8. Liu Y, Li S, Gallucci F, et al. Sol-gel Synthesis of Tetragonal BaTiO3 Thin Films under Fast Heating[J]. Applied Surface Science, 2024, 661: 160 08610.1016/j.apsusc.2024.160086 ↗
9. Ozeki K, Aoki H, Masuzawa T. Influence of the Hydrothermal Temperature and pH on the Crystallinity of a Sputtered Hydroxyapatite Film[J]. Applied Surface Science, 2010, 256(23): 7 027–7 03110.1016/j.apsusc.2010.05.018 ↗
10. Cai W, Rao T, Wang A, et al. A Simple and Controllable Hydrothermal Route for the Synthesis of Monodispersed Cube-like Barium Titanate Nanocrystals[J]. Ceramics International, 2015, 41(3, Part B): 4 514–4 52210.1016/j.ceramint.2014.11.146 ↗
11. özen M, Mertens M, Snijkers F, et al. Hydrothermal Synthesis and Formation Mechanism of Tetragonal Barium Titanate in a Highly Concentrated Alkaline Solution[J]. Ceramics International, 2016, 42(9): 10 967–10 97510.1016/j.ceramint.2016.03.234 ↗
12. ávila H A, Ramajo L A, Reboredo M M, et al. Hydrothermal Synthesis of BaTiO3 from Different Ti-precursors and Microstructural and Electrical Properties of Sintered Samples with Submicrometric Grain Size [J]. Ceramics International, 2011, 37(7): 2 383–2 39010.1016/j.ceramint.2011.03.032 ↗
13. Choi S H, Lee Y, Lee S H, et al. Enhancement of Dielectric Properties and Microstructure Control of BaTiO3 by Seed-induced Solid-state Synthesis[J]. Ceramics International, 2023, 49(11, Part A): 17 921–17 92910.1016/j.ceramint.2023.02.159 ↗
14. Chen C, Wei Y, Jiao X, et al. Hydrothermal Synthesis of BaTiO3: Crystal Phase and the Ba2+ Ions Leaching Behavior in Aqueous Medium[J]. Materials Chemistry and Physics, 2008, 110(1): 186–19110.1016/j.matchemphys.2008.01.031 ↗
15. Cortes Burgos M J, Moglia I, Roa S, et al. Synthesis of Nanostructured BaTiO3 Films by Hydrothermal Modification of Ti Surfaces Using Ba(OH)2 and Oleic Acid[J]. Chemical Physics Letters, 2022, 805: 139 95110.1016/j.cplett.2022.139951 ↗
16. Zhang M, Falvey J, Hector A L, et al. Effects of the Reaction Temperature and Ba/Ti Precursor Ratio on the Crystallite Size of BaTiO3 in Hydrothermal Synthesis[J]. RSC Advances, 2022, 12(43): 27 809–27 81910.1039/D2RA03707F ↗
17. Miyazaki H, Yamada K, Kitano Y, et al. Synthesis of Sr Substituted BaTiO3 Nanoparticles by Hydrothermal Treatments with Maintaining the Source Material Form and Particle Size[J]. Journal of the Ceramic Society of Japan, 2021, 129(3): 143–14610.2109/jcersj2.20196 ↗
18. Zhang M, Falvey J, Hector A L, et al. Effects of the Reaction Temperature and Ba/Ti Precursor Ratio/Concentration on the Crystallite Size of Barium Titanate in Hydrothermal Synthesis[J]. Journal of Materials Science: Materials in Electronics, 2015, 26(11): 8 555–8 562
19. Ozen M, Mertens M, Snijkers F, et al. Hydrothermal Synthesis and Formation Mechanism of Tetragonal Barium Titanate in a Highly Concentrated Alkaline Solution[J]. Ceramics International, 2016, 42(9): 10 967–10 97510.1016/j.ceramint.2016.03.234 ↗
20. Qi H, Fang L, Xie W, et al. Study on the Hydrothermal Synthesis of Barium Titanate Nano-powders and Calcination Parameters[J]. Journal of Materials Science: Materials in Electronics, 2015, 26(11): 8 555–8 562
21. Ozen M, Mertens M, Luyten J, et al. Hydrothermal Synthesis of Carbonate-free Submicron-sized Barium Titanate from an Amorphous Precursor: Synthesis and Characterization[J]. Ceramics International, 2012, 38(1): 619–62510.1016/j.ceramint.2011.07.051 ↗
22. Lu Y, Wang J, He L, et al. Hydrothermal Synthesis and Intrinsic Luminescent Properties of Magnesium Aluminate Spinel[J]. Journal of Alloys and Compounds, 2025, 1010: 178 17610.1016/j.jallcom.2024.178176 ↗
23. Hongo K, Kurata S, Jomphoak A, et al. Stabilization Mechanism of Tetragonal Structure in Hydrothermal Synthesized BaTiO3 Nanocrystal [J]. RSC Advances, 2022, 12(43): 27 809–27 81910.1039/D2RA03707F ↗
24. Wang W, Cao L, Liu W, et al. Low-temperature Synthesis of BaTiO3 Powders by the Sol-gel-hydrothermal Method[J]. Ceramics International, 2013, 39(6): 7 127–7 13410.1016/j.ceramint.2013.02.055 ↗
25. Maxim F, Poenaru I, Teodorescu F, et al. Barium Titanate Torus-like Particles: Low-temperature Synthesis and Formation Mechanism[J]. European Journal of Inorganic Chemistry, 2014, 2014(30): 5 160–5 16710.1002/ejic.201402497 ↗
26. Lin M, Thakur V K, Tan E J, et al. Dopant Induced Hollow BaTiO3 Nanostructures for Application in High Performance Capacitors[J]. Journal of Materials Chemistry, 2011, 21(41): 16 500–16 50410.1039/c1jm12429c ↗
27. Surmenev R A, Chernozem R V, Skirtach A G, et al. Hydrothermal Synthesis of Barium Titanate Nano/Microrods and Particle Agglomerates Using a Sodium Titanate Precursor[J]. Ceramics International, 2021, 47(7): 8 904–8 91410.1016/j.ceramint.2020.12.011 ↗
28. Wang X, Lee B I, Hu M Z, et al. Mechanism of Nanocrystalline BaTiO3 Particle Formation by Hydrothermal Refluxing Synthesis[J]. Journal of Materials Science: Materials in Electronics, 2003, 14(8): 495–500
29. Haneef M, Saleem H, Habib A. Use of Graphene Nanosheets and Barium Titanate as Fillers in PMMA for Dielectric Applications[J]. Synthetic Metals, 2017, 223: 101–10610.1016/j.synthmet.2016.12.006 ↗
30. Shen Z, Li S, Liu Z, et al. Low Temperature One-step Synthesis of Barium Titanate: Thermodynamic Modeling and Experimental Synthesis[J]. Chinese Journal of Chemical Engineering, 2005, 13(2): 225–233
31. Yu Q, Liu D, Wang R, et al. The Dielectric and Photochromic Properties of Defect-rich BaTiO3 Micro Crystallites Synthesized from TiO2 [J]. Materials Science and Engineering: B, 2012, 177(9): 639–64410.1016/j.mseb.2012.03.018 ↗