Novel Polycarboxylate Superplasticizer Architectures Enabled by Mechanochemistry
Source abstract
Abstract
The mechanochemical synthesis of polycarboxylate superplasticizers (PCEs) was achieved using a planetary ball mill at ambient temperature. The effects of ball milling parameters, including speed, time, and stop method, on PCE performance, molecular weight, and distribution were investigated to optimize conditions. The experimental results suggest that ball milling impacts PCE molecular weight and distribution, striking a balance between polymerization and mechanical degradation during synthesis. The optimal parameters were found to be 400 rpm, 120 minutes total time, and 30 minutes milling plus 3 minutes rest cycles. Under these conditions, the PCE exhibits excellent dispersibility with a cement paste fluidity of 260 mm. The mechanochemical approach eliminates heating requirements, and also reduces the reaction time from 300 to 120 minutes compared to traditional aqueous synthesis. The optimized PCE demonstrates an increased density of long-side chains, leading to enhanced early strength, heightens adsorption, and diminished zeta potential in cement systems. These characteristics are comparable to traditionally synthesized PCEs. Moreover, at higher dosages, further augmentation of PCE adsorption and increased cement paste fluidity were noted here.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Bone Tissue Engineering Materials · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Sha SN, Wang M, Shi CJ, et al. Influence of the Structures of Polycarboxylate Superplasticizer on Its Performance in Cement-Based Materials-A Review[J]. Construction and Building Materials, 2020, 233: 117 25710.1016/j.conbuildmat.2019.117257 ↗
2. Lei L, Hirata T, Plank J. 40 Years of Pce Superplasticizers - History, Current State-of-the-Art and an Outlook[J]. Cement and Concrete Research, 2022, 157: 106 82610.1016/j.cemconres.2022.106826 ↗
3. Sha SN, Shi CJ, Xiang SC, et al. The State-of-the-Art Synthesis Techniques of Polycarboxylate Superplasticizer[J]. Material Reports, 2019, 33: 558–568
4. Chomyn C, Plank J. Impact of Different Ph-Values of Polycarboxylate (Pce) Superplasticizer Solutions on Their Dispersing Effectiveness[J]. Construction and Building Materials, 2020, 246: 118 44010.1016/j.conbuildmat.2020.118440 ↗
5. He Y, Zhang X, Shui LL, et al. Effects of Pces with Various Carboxylic Densities and Functional Groups on the Fluidity and Hydration Performances of Cement Paste[J]. Construction and Building Materials, 2019, 202: 656–66810.1016/j.conbuildmat.2018.12.216 ↗
6. Liu X, Wang ZM, Zheng YS, et al. Preparation, Characterization and Performances of Powdered Polycarboxylate Superplasticizer with Bulk Polymerization[J]. Materials, 2014, 7: 6 169–6 18310.3390/ma7096169 ↗
7. Cui XH, Gui XF, Hu JW, et al. Probe into Effect of the Initiator on the Thermal Runaway Hazards of Methyl Methacrylate Bulk Polymerization[J]. Journal of Loss Prevention in the Process Industries, 2023, 83: 105 07410.1016/j.jlp.2023.105074 ↗
8. Zhang QQ, Shu X, Yu XH, et al. Toward the Viscosity Reducing of Cement Paste: Optimization of the Molecular Weight of Polycarboxylate Superplasticizers[J]. Construction and Building Materials, 2020, 242: 117 98410.1016/j.conbuildmat.2019.117984 ↗
9. He ZQ, Zhang GH, Qin S, et al. Synthesis and Properties of Polycarboxylate Superplasticizer at Room Temperature[J]. Chemical Industry and Engineering Progress, 2015, 34: 33
10. Xiang SC, Gao YL, Shi CJ, Progresses in Synthesis of Polycarboxylate Superplasticizer[J]. Advances in Civil Engineering, 2020, 2020: 1–1410.1155/2020/8810443 ↗
11. Chomyn C, Plank J. Impact of Different Synthesis Methods on the Dispersing Effectiveness of Isoprenol Ether-Based Zwitterionic and Anionic Polycarboxylate (Pce) Superplasticizers[J]. Cement and Concrete Research, 2019, 119: 113–12510.1016/j.cemconres.2019.02.001 ↗
12. Zhang LR, Du WQ, Wang DM, et al. Syntheses of Polycarboxylate Superplasticizers: Microwave Induction Versus Conventional Thermal Induction[J]. Composites Part B: Engineering, 2021, 207: 108 56010.1016/j.compositesb.2020.108560 ↗
13. Soni JP, Chemitikanti KS, Joshi SV, et al. The Microwave-Assisted Syntheses and Applications of Non-Fused Single-Nitrogen-Containing Heterocycles[J]. Organic & Biomolecular Chemistry, 2020, 18: 9 737–9 76110.1039/D0OB01779E ↗
14. Behera SS, Panda SK, Mandal D, et al. Ultrasound and Microwave Assisted Leaching of Neodymium from Waste Magnet Using Organic Solvent[J]. Hydrometallurgy, 2019, 185: 61–7010.1016/j.hydromet.2019.02.003 ↗
15. Porcheddu A, Colacino E, De LL, et al. Metal-Mediated and Metal-Catalyzed Reactions under Mechanochemical Conditions[J]. ACS Catalysis, 2020, 10: 8 344–8 39410.1021/acscatal.0c00142 ↗
16. Chen Y, MG, Luijk D, et al. Mechanochemical Tools for Polymer Materials[J]. Chemical Society Reviews, 2021, 50: 4 100–4 14010.1039/D0CS00940G ↗
17. Espro C, Rodríguez-Padrón D. Re-Thinking Organic Synthesis: Mechanochemistry as a Greener Approach[J]. Current Opinion in Green and Sustainable Chemistry, 2021, 30: 100 47810.1016/j.cogsc.2021.100478 ↗
18. Kumar M, Xiong XN, Wan ZH, et al. Ball Milling as a Mechanochemical Technology for Fabrication of Novel Biochar Nanomaterials[J]. Bioresource Technology, 2020, 312: 123 61310.1016/j.biortech.2020.123613 ↗
19. Ning FD, Cong WL. Ultrasonic Vibration-Assisted (UV-A) Manufacturing Processes: State of the Art and Future Perspectives[J]. Journal of Manufacturing Processes, 2020, 51: 174–19010.1016/j.jmapro.2020.01.028 ↗
20. Xu WH, Chen SW, Song LD, et al. Mechanochemical Synthesis of Cysteine-Gum Acacia Intermolecular Complex for Multiple Metal(Loid) Sequestration from Herbal Extracts[J]. Chemosphere, 2023, 338: 139 61210.1016/j.chemosphere.2023.139612 ↗
21. Chai HJ, Zhang ZM, Zhou YQ, et al. Roles of Intrinsic Mn3+ Sites and Lattice Oxygen in Mechanochemical Debromination and Mineralization of Decabromodiphenyl Ether with Manganese Dioxide[J]. Chemosphere, 2018, 207: 41–4910.1016/j.chemosphere.2018.04.160 ↗
22. Yin Z, Zhang QX, Li SY, et al. Mechanochemical Synthesis of Catalysts and Reagents for Water Decontamination: Recent Advances and Perspective[J]. Science of the Total Environment, 2022, 825: 153 99210.1016/j.scitotenv.2022.153992 ↗
23. Için K, Öztürk S, Çakıl DD, et al. Investigation of Nano-Crystaline Strontium Hexaferrite Magnet Powder from Mill Scale Waste by the Mechanochemical Synthesis: Effect of the Annealing Temperature[J]. Materials Chemistry and Physics, 2022, 290: 126 51310.1016/j.matchemphys.2022.126513 ↗
24. Zhang CH, Chen YW, Wu HX, et al. Mechanochemical Synthesis of a Robust Cobalt-Based Metal-Organic Framework for Adsorption Separation Methane from Nitrogen[J]. Chemical Engineering Journal, 2022, 435: 133 87610.1016/j.cej.2021.133876 ↗
25. Dutta A, Abha SR, Jyoti TA. A Mechanistic Approach to Liquid-Assisted Mechanochemical Synthesis of 5-Aryl/Spiro-[1,2,4]-Triazolidine-3-Thiones[J]. European Journal of Organic Chemistry, 2022, 2022(34): 1–710.1002/ejoc.202101472 ↗
26. Zhou ZH, Wang XW, Yu R, et al. Synthesis of B-Axis Oriented Zsm-5 Zeolite by Mechanochemical-Assisted Quasi-Solvent-Free Method and Its Mto Catalytic Performance[J]. Advanced Powder Technology, 2023, 34: 103 93010.1016/j.apt.2022.103930 ↗
27. Zhu ZW, Zheng QR. Investigation of Cryo-Adsorption Hydrogen Storage Capacity of Rapidly Synthesized Mof-5 by Mechanochemical Method[J]. International Journal of Hydrogen Energy, 2023, 48: 5 166–5 17410.1016/j.ijhydene.2022.11.026 ↗
28. Grabias-Blicharz E, Franus W. A Critical Review on Mechanochemical Processing of Fly Ash and Fly Ash-Derived Materials[J]. Science of the Total Environment, 2023, 860: 160 52910.1016/j.scitotenv.2022.160529 ↗
29. Sun WT, Pan LS, Guo ZF, et al. Characterizat Ion and Propert Ies of Polycarboxylate Superplast Icizer by Mechanochemistry[J]. Concrete, 2019: 88–91
30. Lei L, Zhang Y, Li R. Specific Molecular Design of Polycarboxylate Polymers Exhibiting Optimal Compatibility with Clay Contaminants in Concrete[J]. Cement and Concrete Research, 2021, 147: 106 50410.1016/j.cemconres.2021.106504 ↗
31. Zhenping Sun, Zuyue Li, Min Pang, et al. Slow-Release Effect of Polycarboxylate Superplasticizers with Various Functional Groups[J]. Journal of Building Materials, 2022, 25: 310.3390/buildings13010003 ↗
32. Yang ZY, Yu M, Liu YM, et al. Synthesis and Performance of an Environmentally Friendly Polycarboxylate Superplasticizer Based on Modified Poly(Aspartic Acid)[J]. Construction and Building Materials, 2019, 202: 154–16110.1016/j.conbuildmat.2018.12.148 ↗
33. Zhang J, Ma YF, Wang J, et al. A Novel Shrinkage-Reducing Polycarboxylate Superplasticizer for Cement-Based Materials: Synthesis, Performance and Mechanisms[J]. Construction and Building Materials, 2022, 321: 126 34210.1016/j.conbuildmat.2022.126342 ↗
34. Feng PC, Zhang GH, Zhang WB, et al. Comparison of Ester-Based Slow-Release Polycarboxylate Superplasticizers with Their Polycarboxylate Counterparts[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 633: 127 87810.1016/j.colsurfa.2021.127878 ↗
35. Ma YH, Lei L, Sha SN, et al. Synthesis of a Cross-Linked Polycarboxylate Ether Superplasticizer and Its Effects on the Properties of Cement Paste Containing Montmorillonite[J]. Cement and Concrete Research, 2023, 168: 107 13610.1016/j.cemconres.2023.107136 ↗
36. Werani M, Lei L. Influence of Side Chain Length of Mpeg-Based Polycarboxylate Superplasticizers on Their Resistance towards Intercalation into Clay Structures[J]. Construction and Building Materials, 2021, 281: 122 62110.1016/j.conbuildmat.2021.122621 ↗
37. Ley-Hernández AM, Feys D. Resting Time Effect on the Rheological Behavior of Cement Paste in Presence of Superplasticizer[J]. Cement and Concrete Research, 2021, 142: 106 34710.1016/j.cemconres.2020.106347 ↗
38. Xi YM, Lu YC. Mechanochemical Synthesis of Fe/Mn-Based Binary Hexacyanoferrate for Sodium-Ion Battery[J]. Powder Technology, 2023, 423: 118 50010.1016/j.powtec.2023.118500 ↗
39. Fiss BG, Richard AJ, Douglas G, et al. Mechanochemical Methods for the Transfer of Electrons and Exchange of Ions: Inorganic Reactivity from Nanoparticles to Organometallics[J]. Chemical Society Reviews, 2021, 50: 8 279–8 31810.1039/D0CS00918K ↗
40. Shen YF, Schäfer K, Brandt S, et al. Nitrogen vs. Argon Adsorption for Matrix Surface Area Determination of Deactivated Fcc Catalysts Containing Zsm-5[J]. Microporous and Mesoporous Materials, 2022, 344: 112 21010.1016/j.micromeso.2022.112210 ↗
41. Zeng ZX, Tian XY, Qian Y, et al. High Speed Shearing: A Novel Approach for High-Quality Zno Nanoparticle Synthesis and Photocatalytic Activity Control[J]. Powder Technology, 2024, 433: 119 21810.1016/j.powtec.2023.119218 ↗
42. De BG. Mechanochemistry of the Mechanical Bond[J]. Chemical Science, 2018, 9: 15–2110.1039/C7SC04200K ↗
43. Zhang XY, Chen RQ, Gao XY, et al. Mechanochemical Synthesis of Reticular B-Cyclodextrin Polyurethanes for the Decontamination of Phenolic Micropollutants[J]. Chemical Engineering Journal, 2023, 453: 139 98710.1016/j.cej.2022.139987 ↗
44. Wang DM, Zhang CC, Zhang L, et al. Synthesis Characterization and Slow-Release Mechanism of Maleic Anhydride Polycarboxylate-Type Superplasticizers[J]. Chemical Industry and Engineering Progress, 2018, 37: 8
45. Muan PP, Non T, Davé R et al. A Comparative Analysis of Steel and Alumina Balls in Fine Milling of Cement Clinker via Pbm and Dem[J]. Powder Technology, 2023, 421: 118 45410.1016/j.powtec.2023.118454 ↗
46. Yao F, Li MY, Pan LS, et al. Synthesis of Sodium Alginate-Polycarboxylate Superplasticizer and Its Tolerance Mechanism on Montmorillonite[J]. Cement and Concrete Composites, 2022, 133: 104 63810.1016/j.cemconcomp.2022.104638 ↗
47. Liu XY, Zheng QJ, Yang LY, et al. The Segregation of Cement Clinker Particles in a Mill-Feeding Hopper: Piv Experiment and Fem Modelling[J]. Powder Technology, 2023, 426: 118 65610.1016/j.powtec.2023.118656 ↗
48. Zhang LR, Miao X, Kong XM, et al. Retardation Effect of Pce Superplasticizers with Different Architectures and Their Impacts on Early Strength of Cement Mortar[J]. Cement and Concrete Composites, 2019, 104: 103 36910.1016/j.cemconcomp.2019.103369 ↗
49. Fang YC, Wang XG, Jia LT, et al. Synergistic Effect of Polycarboxylate Superplasticizer and Silica Fume on Early Properties of Early High Strength Grouting Material for Semi-Flexible Pavement[J]. Construction and Building Materials, 2022, 319: 126 06510.1016/j.conbuildmat.2021.126065 ↗
50. Jiang LF, Kong XM, Lu ZC, et al. Preparation of Amphoteric Polycarboxylate Superplasticizers and Their Performances in Cementitious System[J]. Journal of Applied Polymer Science, 2015, 132: 1–810.1002/app.41348 ↗
51. Kang SH, Kwon M, Kwon YH, et al. Effects of Polycarboxylate Ether (Pce)-Based Superplasticizer on the Dissolution and Subsequent Hydration of Calcium Oxide (Cao)[J]. Cement and Concrete Research, 2021, 146: 106 46710.1016/j.cemconres.2021.106467 ↗
52. Plank J, Hirsch C. Impact of Zeta Potential of Early Cement Hydration Phases on Superplasticizer Adsorption[J]. Cement and Concrete Research, 2007, 37: 537–54210.1016/j.cemconres.2007.01.007 ↗
53. Sposito R, Maier M, Beuntner N, et al. Evaluation of Zeta Potential of Calcined Clays and Time-Dependent Flowability of Blended Cements with Customized Polycarboxylate-Based Superplasticizers[J]. Construction and Building Materials, 2021, 308: 125 06110.1016/j.conbuildmat.2021.125061 ↗
54. Zhang YR, Kong XM. Correlations of the Dispersing Capability of Nsf and Pce Types of Superplasticizer and Their Impacts on Cement Hydration with the Adsorption in Fresh Cement Pastes[J]. Cement and Concrete Research, 2015, 69: 1–910.1016/j.cemconres.2014.11.009 ↗