Effect of Heat Treatment on Microstructure and Properties of Fe(Al,Ta)/Fe2Ta(Al) Eutectic Composite
Source abstract
Abstract
Fe(Al,Ta)/Fe2Ta(Al) eutectic composites with solidification rates of 6, 20, 30, and 80 µm/s were prepared by a modified Bridgman directional solidification technology. The coarse Fe2Ta(Al) Laves phase was precipitated at the eutectic colony boundary during the solidification process, which can affect the stability of microstructure and properties of the composites. The coarse Laves phase was refined using different heat treatment processes in the present paper. The influences of different heat treatment parameters on the Laves phase content, lamella/rod spacing, and mechanical properties were investigated in detail. In addition, the corrosion behaviors of Fe(Al,Ta)/Fe2Ta(Al) eutectic composites before and after being annealed heat treatment in a 3 g/L Na2S2O3solution were also studied. It is shown that both the content of Laves phase and lamella/rod spacing are gradually decreased after heat treatment. Micro-hardness is decreased, while the yield strength, compressive strength, and corrosion resistance are improved. The optimum heat treatment process is selected as well.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Cui CJ, Wen YG, Yang M, et al. Research Progress of Fe-Al Intermetallic Compound[J]. Materials Protection, 2017, 09: 82–89
2. Cinca N, Lima CRC, Guilemany JM. An Overview of Intermetallics Research and Application: Status of Thermal Spray Coatings[J]. Journal of Materials Research and Technology, 2013, 1(2): 75–8610.1016/j.jmrt.2013.03.013 ↗
3. Cui CJ, Zhang K, Wu CY, et al. High Temperature Oxidation Behavior of Directionally Solidified Fe(Al,Ta)/Fe2Ta(Al) Eutectic Composite[J]. Journal of Alloys and Compounds, 2022, 913: 165 21010.1016/j.jallcom.2022.165210 ↗
4. Ren JW, Li D. Fine Surface Microstructure of Fe3Al Alloy After Severe Plastic Deformation[J]. Materials Letters, 2016, 171: 133–13610.1016/j.matlet.2016.02.069 ↗
5. Stein F, He C, Prymak O, et al. Phase Equilibria in the Fe-Al-Nb System: Solidification Behaviour, Liquidus Surface and Isothermal Sections[J]. Intermetallics, 2015, 59: 43–5810.1016/j.intermet.2014.12.008 ↗
6. Huang GQ, Zhang GK, Luo CY, et al. A Review on Hydrogen Embrittlement of Fe-Al Intermetallics[J]. Materials Review, 2018, 32(11): 1878–1883
7. Risanti DD, Sauthoff G. Microstructures and Mechanical Properties of Fe-Al-Ta Alloys with Strengthening Laves Phase[J]. Intermetallics, 2011, 19: 1727–173610.1016/j.intermet.2011.07.008 ↗
8. Morris DG, Munoz-Morris MA, Baudin C. The High-temperature Strength of Some Fe3Al Alloys[J]. Acta Materialia, 2004, 52: 2827–283610.1016/j.actamat.2004.02.031 ↗
9. Reviere R, Sauthoff G, Johnson DR, et al. Microstructure of Directionally Solidified Eutectic Based Fe(Al,Ta)/Fe2Ta (Al) Alloys as a Function of Processing Conditions[J]. Intermetallics, 1997, 5: 161–17210.1016/S0966-9795(96)00081-7 ↗
10. Hao YC, Zhang JF, Xu PF, et al. Microstructure Evolution and Room Temperature Toughness of Directionally Solidified NiAl-39V Eutectic Alloy at Different Growth Rates[J]. Chinese Journal of Rare Metals, 2021, 45(12): 1455–1463
11. Xu PF, Zhang JF, Chen L, et al. Effect of Growth Rate on Microstructure Evolution and Room Temperature Fracture Toughness of Directionally Solidified NiAl-43V Hypereutectic Alloy[J]. Rare Metal Materials and Engineering, 2020, 49(04): 1415–1421
12. Sheng LY, Guo JT, Lai C, et al. Effect of Zr Addition on Microstructure and Mechanical Properties of NiAl/Cr(Mo) Base Eutectic Alloy[J]. Acta Metallurgica Sinica, 2015, 51(07): 828–834
13. Guo JT, Zhou LZ, Tian YX, et al. Effect of Hf, Sn, Ta, Zr, Dy and Ho on Microstructure and Mechanical Properties of Nb-Nb5Si3 Alloy[J]. Acta Metallurgica Sinica, 2015, 51(07): 815–827
14. Liang YC, Guo JT, Sheng LY, et al. Effects of Rare Earth Element Gd on the Microstructure and Mechanical Properties of NiAl-Cr(Mo)-Hf Eutectic Alloy[J]. Acta Metallurgica Sinica, 2010, 46(05): 528–53210.3724/SP.J.1037.2009.00747 ↗
15. Yan JJ, Guo XP. Effect of Heat-Treatment on Microstructure and Mechanical Behavior of Directionally Solidified Nb-Ti-Si Based Alloy[J]. Rare Metal Materials and Engineering, 2017, 46(1): 1–610.1016/S1875-5372(17)30067-X ↗
16. Wang J, Guo XP, Guo JM. Effects of B on the Microstructure and Oxidation Resistance of Nb-Ti-Si-Based Ultrahigh-Temperature Alloy[J]. Chinese Journal of Aeronautics, 2009, 22(05): 544–55010.1016/S1000-9361(08)60139-9 ↗
17. Jia LN, Guo XP. Effects of Alloying Elements and Heat Treatments on The Microstructure and Mechanical Properties of Refractory Metal Silicide-Based Alloys[J]. Rare Metal Materials and Engineering, 2007, 07: 1304–1308
18. Cui CJ, Wang Y, Zhang K, et al. Crystal Growth Mechanism of Directionally Solidified Fe-Al-Ta Eutectic Composites at Higher Solidification Rates[J]. Vacuum, 2022, 199: 110 92210.1016/j.vacuum.2022.110922 ↗
19. Cui CJ, Wang Y, Zhang K, et al. Mechanical Properties of Fe-Al-Ta Eutectic Composites at Higher Solidification Rates[J]. Materials Science and Engineering: A, 2021, 824: 141 76510.1016/j.msea.2021.141765 ↗
20. Cui CJ, Wang SY, Yang M, et al. Microstructure and Solid/liquid Interface Evolutions of Directionally Solidified Fe-Al-Ta Eutectic Alloy[J]. Journal of Wuhan University of Technology -Materials Science Edition, 2019, 34(03): 656–66110.1007/s11595-019-2100-4 ↗
21. Cui CJ, Ren CQ, Liu YY, et al. Directional Solidification of Fe-Al-Ta Eutectic by Electron Beam Floating Zone Melting[J]. Journal of Alloys and Compounds, 2019, 785: 62–7110.1016/j.jallcom.2019.01.158 ↗
22. Cui CJ, Lai YY, Liu W, et al. Tensile and Fatigue Properties of the Bridgman Directionally Solidified Fe-Al-Ta Eutectic[J]. Materials Science and Engineering: A, 2019, 765: 138 25710.1016/j.msea.2019.138257 ↗
23. Zhang Y, Feng XH, Huang QY, et al. Enhancing Mechanical Properties and Degradation Performance of Mg-0.8wt.%Ca Alloy by Directional Solidification[J]. Transactions of Nonferrous Metals Society of China, 2023, 33(02): 409–42110.1016/S1003-6326(22)66116-8 ↗
24. Zhang JF, Shen J, Shang Z, et al. Effect of Growth Rate Onmicrostructure and Interface Morphology of Directionally Solidified Nial-7.8Mo Hypoeutectic Alloy[J]. Rare Metal Materials and Engineering, 2013, 42(2): 263–267
25. Xu YK, Li CL, Huang ZH, et al. Microstructure and Mechanical Properties of CoCrCuFeNiTi0.8 High-entropy Alloy Prepared by Directional Solidification[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(6): 1494–1504
26. Wang L, Yao CL, Shen J, et al. Microstructures and Room Temperature Tensile Properties of As-Cast and Directionally Solidified AlCoCrFeNi2.1 Eutectic High-Entropy Alloy[J]. Intermetallics, 2020, 118: 106 68110.1016/j.intermet.2019.106681 ↗