Preparation of Fine-grained 3Y-TZP Ceramics with Enhanced Low-temperature Degradation Resistance
Source abstract
Abstract
The occurrence of tetragonal to monoclinic phase (t→m) transformation in zirconia ceramics under humid ambient conditions induces the low-temperature degradation (LTD). Sucht→mtransformation could be suppressed by grain size refinement or/and doping small amounts of alumina. Fine-grained dense 3mol% yttria-doped tetragonal zirconia polycrystal (3Y-TZP) ceramics were prepared by pressureless sintering a zirconia powder doped with 0.25wt% alumina. The LTD behaviors of as-prepared 3Y-TZP ceramics were evaluated by accelerated aging at 134 °C in water. The samples sintered at 1 300 °C for 2 h achieve the relative density higher than 99.9% with the average grain size of 147 nm. The 3Y-TZP ceramic exhibits excellent LTD resistance that not→mtransformation takes place after 125 h accelerated aging. Large amounts of defects were observed inside grains evidenced by the high-resolution transmission electron microscopic (HRTEM) analysis. It is proposed that the presence of defects enhances the sintering kinetics and favors the present low-temperature densification. Possible reasons for defects formation were discussed and the mechanical properties of the 3Y-TZP ceramic were reported as well.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Garvie RC, Hannink RH, Pascoe RT. Ceramic Steel[J]. Nature, 1975, 258: 703–70410.1038/258703a0 ↗
2. Bayne SC, Ferracane JL, Marshall GW, et al. The Evolution of Dental Materials over the Past Century: Silver and Gold to Tooth Color and Beyond[J]. Journal of Dental Research, 2019, 98(3): 257–26510.1177/0022034518822808 ↗
3. Arlucea N, Brizuela-Velasco A, Dieguez-Pereira M, et al. Zirconia vs. Titanium Dental Implants: Primary Stability in-vitro Analysis[J]. Materials, 2021, 14(24): 7 88610.3390/ma14247886 ↗
4. Hanawa T. Zirconia Versus Titanium in Dentistry: A Review[J]. Dental Materials Journal, 2020, 39(1): 24–3610.4012/dmj.2019-172 ↗
5. Chevalier J. What Future for Zirconia as a Biomaterial[J]? Biomaterials, 2006, 27(4): 535–54310.1016/j.biomaterials.2005.07.034 ↗
6. Chevalier J, Gremillard L, Deville S. Low-temperature Degradation of Zirconia and Implications for Biomedical Implants[J]. Annual Review of Materials Research, 2007, 37(1): 1–3210.1146/annurev.matsci.37.052506.084250 ↗
7. Chevalier J, Gremillard L, Virkar AV, et al. The Tetragonal-monoclinic Transformation in Zirconia: Lessons Learned and Future Trends[J]. Journal of the America Ceramic Society, 2009, 92(9): 1901–192010.1111/j.1551-2916.2009.03278.x ↗
8. Lughi V, Sergo V. Low Temperature Degradation-aging-of Zirconia: A Critical Review of the Relevant Aspects in Dentistry[J]. Dental Materials, 2010, 26(8): 807–82010.1016/j.dental.2010.04.006 ↗
9. Lange FF. Transformation Toughening Part 1 Size Effects Associated with the Thermodynamics of Constrained Transformations[J]. Journal of Materials Science, 1982, 17(1): 225–23410.1007/BF00809057 ↗
10. Schubert H, Frey F. Stability of Y-TZP During Hydrothermal Treatment: Neutron Experiments and Stability Considerations[J]. Journal of the European Ceramic Society, 2005, 25(9): 1597–160210.1016/j.jeurceramsoc.2004.03.025 ↗
11. Garvie RC. The Occurrence of Metastable Tetragonal Zirconia as A Crystallite Size Effect[J]. Journal of Physical Chemistry, 1965, 69(4): 1283–124310.1021/j100888a024 ↗
12. Sato T, Shimada M. Control of the Tetragonal-to-monoclinic Phase Transformation of Yttria Partially Stabilized Zirconia in Hot Water[J]. Journal of Materials Science, 1985, 20(11): 3988–399210.1007/BF00552389 ↗
13. Li J, Watanable R. Influence of a Small Amount of Al2O3 Addition on the Transformation of Y2O3-patially Stabilized ZrO2 During Annealing[J]. Journal of Materials Science, 1997, 32(5): 1149–115310.1023/A:1018567414745 ↗
14. Matsui K, Ohmichi N, Ohgai M, et al. Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder[J]. Journal of the America Ceramic Society, 2005, 88(12): 3346–335210.1111/j.1551-2916.2005.00620.x ↗
15. Matsui K, Yoshida H, Ikuhara Y. Grain-boundary Structure and Microstructure Development Mechanism in 2–8mol% Yttria-stabilized Zirconia[J]. Acta Materialia, 2008, 56(6): 1315–132510.1016/j.actamat.2007.11.026 ↗
16. Matsui K, Yoshida H, Ikuhara Y. Phase-transformation and Graingrowth Kinetics in Yttria-stabilized Tetragonal Zirconia Polycrystals Doped with a Small Amount of Alumina[J]. Journal of the European Ceramic Society, 2010, 30(7): 1679–169010.1016/j.jeurceramsoc.2010.01.007 ↗
17. Nogiwa-Valdez AA, Rainforth WM, Zheng P, et al. Deceleration of Hydrothermal Degradation of 3Y-TZP by Alumina and Lanthana Co-doping[J]. Acta Biomaterialia, 2013, 9(4): 6226–623510.1016/j.actbio.2012.11.027 ↗
18. Chen IW, Wang XH. Sintering Dense Nanocrystalline Ceramics without Final-stage Grain Growth[J]. Nature, 2000, 404: 168–17110.1038/35004548 ↗
19. ISO Standard 13356. Implants for Surgery-Ceramic Materials Based on Yttria-stabilized Tetragonal Zirconia (Y-TZP)[S], 2015
20. Toraya H, Yoshimura M, Somiya S. Calibration Curve for Quantitative Analysis of the Monoclinic-tetragonal ZrO2 Systems by X-ray Diffraction[J]. Journal of the America Ceramic Society, 1984, 67(6): C119–C121
21. Niihara K, Morena R, Hasselman DPH. Evaluation of KIc of Brittle Solids by the Indentation Method with Low Crack-to-indent Ratios[J]. Journal of Materials Science Letters, 1982, 1(1): 13–1610.1007/BF00724706 ↗
22. McHale JM, Auroux A, Perrotta AJ, et al. Surface Energies and Thermodynamic Phase Stability in Nanocrystalline Aluminas[J]. Science, 1997, 277(5327): 788–79110.1126/science.277.5327.788 ↗
23. Xiong Y, Fu ZY, Pouchy V, et al. Preparation of Transparent 3Y-TZP Nanoceramics with No-low Temperature Degradation[J]. Journal of the America Ceramic Society, 2014, 97(5): 1402–140610.1111/jace.12919 ↗
24. Hwang SL, Chen IW. Grain Size Control of Tetragonal Zirconia Polycrystals Using the Space Charge Concept[J]. Journal of the America Ceramic Society, 1990, 73(11): 3269–327710.1111/j.1151-2916.1990.tb06449.x ↗
25. Zhang F, Vanemeensel K, Batuk M, et al. Highly-translucent, Strong and Aging-resistant 3Y-TZP Ceramics for Dental Restoration by Grain Boundary Segregation[J]. Acta Biomaterialia, 2015, 16(1): 215–22210.1016/j.actbio.2015.01.037 ↗
26. Boulc’h F, Djurado E, Dessemond L. Dopant Segregation and Space Charge Effect in Nanostructured Tetragonal Zirconia[J]. Journal of the Electrochemical Society, 2004, 151(8): A1210–A121510.1149/1.1764711 ↗
27. Ross IM, Rainforth WM, McComb DW, et al. The Role of Trace Additions of Alumina to Yttria-tetragonal Zirconia Polycrystals (Y-TZP)[J]. Scripta Materialia, 2001, 45(6): 653–66010.1016/S1359-6462(01)01076-4 ↗
28. Matsui K, Yamakawa T, Uehara M, et al. Sintering Mechanism of Fine Zirconia Powders with Alumina Added by Powder Mixing and Chemical Processes[J]. Journal of Materials Science, 2008, 43(8): 2745–275310.1007/s10853-008-2493-5 ↗
29. Zhang F, Vanmeensel K, Inokoshi M, et al. Critical Influence of Alumina Content on the Low Temperature Degradation of 2–3mol% Yttria-stabilized TZP for Dental Restorations[J]. Journal of the European Ceramic Society, 2015, 35(2): 741–75010.1016/j.jeurceramsoc.2014.09.018 ↗
30. Ji W, Rehman SS, Wang WM, et al. Sintering Boron Carbide Ceramics Without Grain Growth by Plastic Deformation as the Dominant Densification Mechanism[J]. Scientific Reports, 2015, 5: 15 82710.1038/srep15827 ↗
31. Trunec M. Effect of Grain Size on Mechanical Properties of 3Y-TZP Ceramics[J]. Ceramic Silikáty, 2008, 52: 165–171
32. Phuah XL, Cho J, Tsakalakos T, et al. Defects in Flash-sintered Ceramics and Their Effects on Mechanical Properties[J]. MRS Bulletin, 2021, 46(1): 44–5110.1557/s43577-020-00014-y ↗