Synergistically Improved Mechanical Properties and Thermal Conductivity of Hypoeutectic AlSiNiFeMg Alloy Prepared by Ultrasonic-assisted Casting
Source abstract
Abstract
We employed a melt ultrasonic treatment near the liquidus to prepare a high-thermal-conductivity Al-4Si-2Ni-0.8Fe-0.4Mg alloy. The influences of various ultrasonic powers on its microstructure, mechanical properties, and thermal conductivity were investigated. It is shown that near-liquidus ultrasonication significantly refines the alloy grains and eutectic structure, synergistically improving the alloy’s mechanical properties and thermal conductivity. Specifically, the grain size decreased by 84.5% from 941.4 to 186.2 µm. Increasing the ultrasonic power improved the thermal conductivity of the alloy slightly and significantly enhanced its mechanical properties. At an ultrasonic power of 2 100 W, the tensile strength, yield strength, elongation rate, and thermal conductivity were 216 MPa, 142 MPa, 6.3%, and 169 W/(m·k), respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Qi M, Kang Y, Li J, et al. Improvement in Mechanical, Thermal Conductivity and Corrosion Performances of a New High-thermally Conductive Al-Si-Fe Alloy Through a Novel R-HPDC Process[J]. J. Mater. Process Technol., 2020: 27910.1016/j.jmatprotec.2019.116586 ↗
2. Zhang X, Zhou Y, Zhong G, et al. Effects of Si and Sr Elements on Solidification Microstructure and Thermal Conductivity of Al-Si-based Alloys[J]. J. Mater. Sci., 2022, 57(11): 6 428–6 44410.1007/s10853-022-07045-7 ↗
3. Kumar L, Jang J C, Yu H, et al. Effect of Secondary Phase on Mechanical and Thermal Conductivity of Al-Si-xFe-Mg-yCu-Mn Die Casting Alloys[J]. Mater. Lett., 2022: 31410.1016/j.matlet.2022.131889 ↗
4. Gan JQ, Huang Y J, Wen C, et al. Effect of Sr Modification on Microstructure and Thermal Conductivity of Hypoeutectic Al-Si Alloys[J]. Trans. Nonferrous Met. Soc. China, 2020, 30(11): 2 879–2 89010.1016/S1003-6326(20)65428-0 ↗
5. Gan J, Du J, Wen C, et al. The Effect of Fe Content on the Solidification Pathway, Microstructure and Thermal Conductivity of Hypoeutectic Al-Si Alloys[J]. Int. J. Metalcast, 2021, 16(1): 178–19010.1007/s40962-021-00580-0 ↗
6. Dutta B, Rettenmayr M. Effect of Cooling Rate on the Solidification Behaviour of Al-Fe-Si Alloys[J]. Mater. Sci. Eng, A, 2000, 283(1–2): 218–22410.1016/S0921-5093(00)00742-5 ↗
7. Zhou Y, Zhang X, Zhong G, et al. Elucidating Thermal Conductivity Mechanism of Al-9Si Based Alloys with Trace Transition Elements (Mn, Cr, V)[J]. J. Alloys Compd., 2022: 90710.1016/j.jallcom.2022.164446 ↗
8. Chen JK, Hung HY, Wang CF, et al. Effects of Casting and Heat Treatment Processes on the Thermal Conductivity of an Al-Si-Cu-Fe-Zn Alloy[J]. Int. J. Heat Mass. Transfer., 2017, 105: 189–19510.1016/j.ijheatmasstransfer.2016.09.090 ↗
9. Zhu X, Ai S, Lu X, et al. Thermal Conductivity of Closed-cell Aluminum foam Based on the 3D Geometrical Reconstruction[J]. Int. J. Heat Mass. Transfer., 2014, 72: 242–24910.1016/j.ijheatmasstransfer.2014.01.006 ↗
10. Lin C, Wu SS, Zhong G, et al. Effect of Ultrasonic Vibration on Fe-containing Intermetallic Compounds of Hypereutectic Al-Si Alloys with High Fe Content[J]. Trans. Nonferrous Met. Soc. China, 2013, 23(5): 1 245–1 25210.1016/S1003-6326(13)62589-3 ↗
11. Gao XP, Li XT, Qie XW, et al. Effect of High-intensity Ultrasound on Restraining Solute Segregation in Al-Si Alloy Casting Process[J]. Acta Phys. Sin., 2007, 56: 1 188–1 19410.7498/aps.56.1188 ↗