Refinement Mechanism of Microstructure of Undercooled Nickel Based Alloys
Source abstract
Abstract
Through the use of purification and recirculation superheating techniques on molten glass, the Ni65Cu33Co2 alloy was successfully undercooled to a maximum temperature of 292 K. High-speed photography was employed to capture the process of interface migration of the alloy liquid, allowing for an analysis of the relationship between the morphological characteristics of the alloy liquid solidification front and the degree of undercooling. Additionally, the microstructure of the alloy was examined using metallographic microscopy, leading to a systematic study of the microscopic morphological characteristics and evolution laws of the refined structure during rapid solidification. The research reveals that the grain refining mechanism of the Ni-Cu-Co ternary alloy is consistent with that of the binary alloy (Ni-Cu). Specifically, under low undercooling conditions, intense dendritic remelting was found to cause grain refinement, while under high undercooling conditions, recrystallization driven by accumulated stress and plastic strain resulting from the interaction between the liquid flow and the primary dendrites caused by rapid solidification was identified as the main factor contributing to grain refinement. Furthermore, the study highlights the significant role of the Co element in influencing the solidification rate and reheat effect of the alloy. The addition of Co was also found to facilitate the formation of non-segregated solidification structure, indicating its importance in the overall solidification process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Herlach DM. Non-equilibrium Solidification of Undercooled Metallic Melts[J]. Mater. Sci. Eng. R., 1994, 12: 177–27210.1016/0927-796X(94)90011-6 ↗
2. Mullis AM, Cochrane RF. Grain Refinement and the Stability of Dendrites Growing into Undercooled Pure Metals and Alloys[J]. J. Appl. Phys., 1997, 82(8): 3783–379010.1063/1.365740 ↗
3. Gleiter H. Nanocrystalline Materials[J]. Mater. Sci. Eng. R., 1989, 33: 223–315
4. Wei B, Yang C, Zhou Y. High Undercooling and Rapid Solidification of Ni-32.5%Sn Eutectic Alloy[J]. Acta Metall. Mater., 1991,39(6): 1249–125810.1016/0956-7151(91)90212-J ↗
5. Xi Z, Yang G, Zhou Y. Growth Morphology of Ni3Si in High Undercooled Ni-Si Eutectic Alloy[J]. Prog. Nat. Sci., 1997, 5: 114–121
6. Leung KK, Chiu CP, Kui HW. Grain Refinement in Undercooled Nickel[J]. Scripta Metal. Mater., 1995, 32(10): 1559–156310.1016/0956-716X(94)00029-H ↗
7. Schwarz M, Karma A, Eckler K, Herlach DM. Physical Mechanism of Grain Refinement in Solidification of Undercooled Melts[J]. Phys. Rev. Lett., 1994, 73(10): 1380–138310.1103/PhysRevLett.73.1380 ↗
8. Kattamis TZ. Mechanism of Establishment of Cast Microstructure During Solidification of Highly Undercooled Melts[J]. J. Cryst. Growth, 1976, 34(2): 215–22010.1016/0022-0248(76)90132-9 ↗
9. Li J, Liu Y, Lu Y, et al. Structural Evolution of Undercooled Ni-Cu Alloys[J]. J. Cryst. Growth, 199, 192: 462–47010.1016/S0022-0248(98)00399-6 ↗
10. Powell L. The Undercooling of Silver[J]. J. Aust. Inst. Met., 1965, 10: 3 223
11. Jones B, Weston G. Grain Refinement in Undercooled Copper[J]. J. Aust. Inst. Met., 1970, 15: 3 167
12. Horvay G. The Tension Field Created by a Spherical Nucleus Freezing into Its Less Dense Undercooled Melt[J]. Int. J. Heat Mass Transfer., 1965, 8(2): 195–24310.1016/0017-9310(65)90110-9 ↗
13. Willnecker R, Herlach DM, Feuerbacher B. Grain Refinement Induced by a Critical Crystal Growth Velocity in Undercooled Melts[J]. Appl. Phys. Lett., 1990, 56(4): 324–32610.1063/1.103289 ↗
14. Zheng HX, Yu Y, Li JG. Microstructural Evolution of Undercooled Ni-40wt%Pb Hypermonotectic Alloy[J]. Mater. Sci. Forum, 2005, 475: 2651–265410.4028/www.scientific.net/MSF.475-479.2651 ↗
15. Dragnevski KI, Mullis AM, Cochrane RF. The Effect of Experimental Variables on the Levels of Melt Undercooling[J]. Materials Science and Engineering: A, 2004, 375–377: 485–48710.1016/j.msea.2003.10.050 ↗
16. Langer JS. Instabilities and Pattern Formation in Crystal Growth[J]. Rev. Modern. Phys., 1980, 52: 1–2810.1103/RevModPhys.52.1 ↗
17. Kurz W, Trivedi R. Solidification Microstructure: Recent Developments and Future Directions[J]. Acta Metal. Mater., 1990, 38: 1–1710.1016/0956-7151(90)90129-5 ↗
18. Boettinger WJ, Coriell SR, Trivedi R. In: Mehrabian R, Parrish PA eds., Rapid Solidification Processing: Principles and Technologies IV[M]. Baton Rouge, LA: Claitor’s Pulishing Division, 1988: 13–18
19. Li J, Liu Y, Lu Y, et al. Structural Evolution of Undercooled Ni-Cu alloys[J]. J. Cryst. Growth, 1998, 192: 462–47010.1016/S0022-0248(98)00399-6 ↗
20. AK Dahle DHJ, Thevik HJ. Modelling the Fluid Flow Induced Stress and Collappse in a Dentritic Network[J]. Metall. Mater. Trans. B., 1999: 3010.1007/s11663-999-0058-x ↗
21. Kurz W, Fisher DJ. Fundamentals of Solidification[M]. 4th Revised Edition. Switzerland: Trans. Tech. Publications Ltd., 1998: 1–292
22. Rappaz M. Modelling of Microstructure of Formation in Solidification Process[J]. Inter. Mater. Rev., 1989, 34: 93–12310.1179/imr.1989.34.1.93 ↗
23. Beckermann C, Viskanta R. Mathematical Modeling of Transport during Alloy Solidification[J]. Appl. Mech. Rev., 1993, 46: 1–2710.1115/1.3120318 ↗